Search NASA⌕ Search

SEARCH · Search NASA

Results for “computer simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Primary radiation damage: A review of current understanding and models

Scientific understanding of any kind of radiation effects starts from the primary damage, i.e. the defects that are produced right after an initial atomic displacement event initiated by a high-energy particle. In this Review, we consider the extensive experimental and computer simulation studies that have been performed over the past several decades on what the nature of the primary damage is. We review both the production of crystallographic or topological defects in materials as well as radiation mixing, i.e. the process where atoms in perfect crystallographic positions exchange positions with other ones in non-defective positions. All classes of materials except biological materials are considered. We also consider the recent effort to provide alternatives to the current international standard for quantifying this energetic particle damage, the Norgett-Robinson-Torrens displacements per atom (NRT-dpa) model for metals. We present in detail new complementary displacement production estimators (“athermal recombination corrected dpa”, arc-dpa) and atomic mixing (“replacements per atom”, rpa) functions that extend the NRT-dpa, and discuss their advantages and limitations.

36 MATERIALS SCIENCE↗

Fast equilibration of coarse-grained polymeric liquids

The study of macromolecular systems may require large computer simulations that are too time consuming and resource intensive to execute in full atomic detail. The integral equation coarse-graining approach by Guenza and co-workers enables the exploration of longer time and spatial scales without sacrificing thermodynamic consistency, by approximating collections of atoms using analytically-derived soft-sphere potentials. Because coarse-grained (CG) characterizations evolve polymer systems far more efficiently than the corresponding united atom (UA) descriptions, we can feasibly equilibrate a CG system to a reasonable geometry, then transform back to the UA description for a more complete equilibration. Automating the transformation between the two different representations simultaneously exploits CG efficiency and UA accuracy. By iteratively mapping back and forth between CG and UA, we can quickly guide the simulation towards a configuration that would have taken many more time steps within the UA representation alone. Accomplishing this feat requires a diligent workflow for managing input/output coordinate data between the different steps, deriving the potential at runtime, and inspecting convergence. Here in this article, we present a lightweight workflow environment that accomplishes such fast equilibration without user intervention. The workflow supports automated mapping between the CG and UA descriptions in an iterative, scalable, and customizable manner. We describe this technique, examine its feasibility, and analyze its correctness.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Computer modelling of the reduction of rare earth dopants in barium aluminate

Long lasting phosphorescence in barium aluminates can be achieved by doping with rare earth ions in divalent charge states. The rare earth ions are initially in a trivalent charge state, but are reduced to a divalent charge state before being doped into the material. In this paper, the reduction of trivalent rare earth ions in the BaAl{sub 2}O{sub 4} lattice is studied by computer simulation, with the energetics of the whole reduction and doping process being modelled by two methods, one based on single ion doping and one which allows dopant concentrations to be taken into account. A range of different reduction schemes are considered and the most energetically favourable schemes identified. - Graphical abstract: The doping and subsequent reduction of a rare earth ion into the barium aluminate lattice. Highlights: > The doping of barium aluminate with rare earth ions reduced in a range of atmospheres has been modelled. > The overall solution energy for the doping process for each ion in each reducing atmosphere is calculated using two methods. > The lowest energy reduction process is predicted and compared with experimental results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of fold defects in AZ91D and AE42 magnesium alloy permanent mold castings

Casting premium-quality magnesium alloy components for aerospace and automotive applications poses unique challenges. Magnesium alloys are known to freeze rapidly prior to filling a casting cavity, resulting in misruns and cold shuts. In addition, melt oxidation, solute segregation and turbulent metal flow during casting contribute to the formation of fold defects. In this research, formation of fold defects in AZ91D and AE42 magnesium alloys cast via the permanent mold casting process was investigated. Computer simulations of the casting process predicted the development of a turbulent metal flow in a critical casting region with abrupt geometrical transitions. SEM and light optical microscopy examinations revealed the presence of folds in this region for both alloys. However, each alloy exhibited a unique mechanism responsible for fold formation. In the AZ91D alloy, melt oxidation and velocity gradients in the critical casting region prevented fusion of merging metal front streams. In the AE42 alloy, limited solubility of rare-earth intermetallic compounds in the {alpha}-Mg phase resulted in segregation of Al{sub 2}RE particles at the leading edge of a metal front and created microstructural inhomogeneity across the fold.

36 MATERIALS SCIENCE↗

Particle tracking during Ostwald ripening using time-resolved laboratory X-ray microtomography

Laboratory X-ray microtomography is investigated as a method for obtaining time-resolved images of microstructural coarsening of the semisolid state of Al–5 wt.% Cu samples during Ostwald ripening. Owing to the 3D imaging capability of tomography, this technique uniquely provides access to the growth rates of individual particles, thereby not only allowing a statistical characterization of coarsening—as has long been possible by conventional metallography—but also enabling quantification of the influence of local environment on particle boundary migration. The latter information is crucial to understanding growth kinetics during Ostwald ripening at high volume fractions of the coarsening phase. Automated image processing and segmentation routines were developed to close gaps in the network of particle boundaries and to track individual particles from one annealing step to the next. The particle tracking success rate places an upper bound of only a few percent on the likelihood of segmentation errors for any given particle. The accuracy of particle size trajectories extracted from the time-resolved tomographic reconstructions is correspondingly high. Statistically averaged coarsening data and individual particle growth rates are in excellent agreement with the results of prior experimental studies and with computer simulations of Ostwald ripening. - Highlights: • Ostwald ripening in Al–5 wt.% Cu measured by laboratory X-ray microtomography • Time-resolved measurement of individual particle growth • Automated segmentation routines developed to close gaps in particle boundary network • Particle growth/shrinkage rates deviate from LSW model prediction.

36 MATERIALS SCIENCE↗

Examining the microtexture evolution in a hole-edge punched into 780 MPa grade hot-rolled steel

The deformation behavior in the hole-edge of 780 MPa grade hot-rolled steel during the punching process was investigated via microstructure characterization and computational simulation. Microstructure characterization was conducted to observe the edges of punched holes through the thickness direction, and electron back-scattered diffraction (EBSD) was used to analyze the heterogeneity of the deformation. Finite element analysis (FEA) that could account for a ductile fracture criterion was conducted to simulate the deformation and fracture behaviors of 780 MPa grade hot-rolled steel during the punching process. Calculation of rotation rate fields at the edges of the punched holes during the punching process revealed that metastable orientations in Euler space were confined to specific orientation groups. Rotation-rate fields effectively explained the stability of the initial texture components in the hole-edge region during the punching process. A visco-plastic self-consistent (VPSC) polycrystal model was used to calculate the microtexture evolution in the hole-edge region during the punching process. FEA revealed that the heterogeneous effective strain was closely related to the heterogeneity of the Kernel average misorientation (KAM) distribution in the hole-edge region. A simulation of the deformation microtexture evolution in the hole-edge region using a VPSC model was in good agreement with the experimental results. - Highlights: •We analyzed the microstructure in a hole-edge punched in HR 780HB steel. •Rotation rate fields revealed the stability of the initial texture components. •Heterogeneous effective stain was closely related to the KAM distribution. •VPSC model successfully simulated the deformation microtexture evolution.

36 MATERIALS SCIENCE↗

In-situ characterization of laser-powder interaction and cooling rates through high-speed imaging of powder bed fusion additive manufacturing

We report detailed understanding of the complex melt pool physics plays a vital role in predicting optimal processing regimes in laser powder bed fusion additive manufacturing. In this work, we use high framerate video recording of Selective Laser Melting (SLM) to provide useful insight on the laser-powder interaction and melt pool evolution of 316 L powder layers, while also serving as a novel instrument to quantify cooling rates of the melt pool. The experiment was performed using two powder types – one gas- and one water-atomized – to further clarify how morphological and chemical differences between these two feedstock materials influence the laser melting process. Finally, experimentally determined cooling rates are compared with values obtained through computer simulation, and the relationship between cooling rate and grain cell size is compared with data previously published in the literature.

316 L stainless steel↗

Influence of activation parameters on the thickness of MgO thin film on Ag-3Mg alloy and its secondary electron emission property

Highlights: • MgO films with controlled thicknesses on Ag-3Mg alloys were prepared by activation in low vacuum with oxygen. • Superior secondary electron yield was obtained for the Ag-3Mg alloy with proper thickness of MgO film. • Oxygen pressure during the activation process is crucial for obtaining good secondary electron yield for Ag-3Mg alloys. • The mechanism of secondary electron emission in MgO films is discussed. - Abstract: MgO thin films of different thicknesses were prepared on polished Ag-3wt%Mg alloy by an activation process at 500–650 °C under oxygen pressures of 0.5–10.0 Pa. The influence of the thickness of MgO film on the secondary electron yield of the Ag-3wt%Mg alloy is investigated. The alloy with an MgO film of moderate thickness of 65 ± 1 nm shows the highest secondary electron yield of 10. Oxygen pressure below 10.0 Pa is crucial for the formation of intact MgO film on the top surface. Computational simulation analysis reveals that the maximum yield occurs when the penetration depth of primary electrons is 13–18 nm less than the thickness of MgO film. Electron supply of this extra MgO film is allowed by an electron tunneling mechanism under certain bias voltage. The replenishment of new electrons to the electron deficient surface is crucial for obtaining optimized secondary electron yields for Ag-Mg alloy cathodes.

36 MATERIALS SCIENCE↗

Effects of grain boundary disorder on dislocation emission

It was recently reported that segregation of Zr to grain boundaries (GB) in nanocrystalline Cu can lead to the development of disorder in the intergranular structure (Khalajhedayati et al., 2016; Khalajhedayati and Rupert, 2015). In this study we employ atomistic computer simulations to investigate how this disorder affects dislocation nucleation from the GBs under applied stress. It was found that a fully disordered grain boundary structure suppresses dislocation emission and significantly increases the yield stress. Depending on the solute concentration and heat-treatment, however, partial disorder may also occur and this aids dislocation nucleation rather than suppressing it, reducing or eliminating the strengthening effect.

36 MATERIALS SCIENCE↗

Ultrahigh coulombic efficiency electrolyte enables Li||SPAN batteries with superior cycling performance

Raising the coulombic efficiency of lithium metal anode cycling is the deciding step in realizing long-life rechargeable lithium batteries. Here, we designed a highly concentrated salt/ether electrolyte diluted in a fluorinated ether: 1.8 M LiFSI in DEE/BTFE (diethyl ether/bis(2,2,2-trifluoroethyl)ether), which realized an average coulombic efficiency of 99.37% at 0.5 mA cm -2 and 1 mAh cm -2 for more than 900 cycles. This electrolyte also maintained a record coulombic efficiency of 98.7% at 10 mA cm -2 , indicative of its ability to provide fast-charging with high cathode loadings. Morphological studies reveal dense, dendrite free Li depositions after prolonged cycling, while surface analyses confirmed the formation of a robust LiF-rich SEI layer on the cycled Li surface. Moreover, we discovered that this ether-based electrolyte is highly compatible with the low-cost, high-capacity SPAN (Sulfurized polyacrylonitrile) cathode, where the constructed Li||SPAN cell exhibited reversible cathode capacity of 579 mAh g -1 and no capacity decay after 1200 cycles. A cell where a high areal loading SPAN electrode (>3.5 mAh cm -2 ) is paired with only onefold excess Li was constructed and cycled at 1.75 mA cm -2 , maintaining a coulombic efficiency of 99.30% for the lithium metal. Computational simulations revealed that at saturation, the Li-FSI complex forms contact ion pairs, with a first solvation shell comprising DEE molecules, and a second solvation shell with a mix of DEE/BTFE. This study provides a path to enable high energy density Li||SPAN batteries with stable cycling.

36 MATERIALS SCIENCE↗

Phase transition in two-dimensional tellurene under mechanical strain modulation

Here, we carry out computational simulations based on density functional theory (DFT) to investigate different phases of two-dimensional (2-D) tellurene. These phases are classified by their characteristic space groups and symmetry elements. Correlations of these phases to the bulk crystalline tellurium structure are also illustrated. Our specific interests include mechanical property calculations for different phases and the possible phase transitions between them. Simulation results show that these 2-D Te phases have very different elastic moduli due to their different atomic bonding and relaxed structures. Moreover, compression along the in-plane directions facilitates the α → β phase transition, while in-plane tensile strains always make the α-phase more stable than the β-phase. However, the energy difference between the two phases is comparable to or even much smaller than the thermal energy kT, depending on the in-plane strain direction. We find that further increase of the tensile strain along the chain direction beyond a critical value, ca. 12%, may lead to a possible α → γ phase transition. As the tensile strain is above 15%, the γ-phase will be more stable than the α-phase, accompanied by a further reduced transition energy barrier.

2-D materials↗

HOM identification by bead pulling in the Brookhaven ERL cavity

Several past measurements of the Brookhaven ERL at superconducting temperature produced a long list of higher order modes (HOMs). The Niobium 5-cell cavity is terminated with HOM ferrite dampers that successfully reduce the Q-factors to tolerable levels. However, a number of undamped resonances with Q {ge} 10{sup 6} were found at 4 K and their mode identification remained as a goal for this paper. The approach taken here consists in taking different S{sub 21} measurements on a copper cavity replica of the ERL which can be compared with the actual data and also with Microwave Studio computer simulations. Several different S{sub 21} transmission measurements are used, including those taken from the fundamental input coupler to the pick-up probe across the cavity, between probes in a single cell, and between beam-position monitor probes in the beam tubes. Mode identification is supported by bead pulling with a metallic needle or a dielectric sphere that are calibrated in the fundamental mode. This paper presents results for HOMs in the first two dipole bands with the prototypical 958 MHz trapped mode, the lowest beam tube resonances, and high-Q modes in the first quadrupole band and beyond.

36 MATERIALS SCIENCE↗

Feasibility of using crystal channeling for the beam loss mitigation in slow extraction at 8GeV

In the accelerator applications of slow extraction for High Energy Physics (HEP), one of the prime challenges is the mitigation of beam losses, which is becoming increasingly critical with the continuous rise in beam power. A significant breakthrough was achieved earlier at CERN through the successful deployment of proton beam channeling in a crystal at 400GeV, effectively diverting the beam away from extraction septa and offering new avenues for improving slow extraction efficiency. However, a crucial question remains whether this approach is still effective at lower and medium proton beam energies. In this paper, we present the promising results of the computer simulation studies of the septum shadowing at 8GeV for the Mu2e project slow extraction at Fermilab. In conclusion, across the wide range of beam parameters, the beam loss reduction is shown to range between 40% and factor of three.

43 PARTICLE ACCELERATORS↗

Data on erosion and hydrogen fuel retention in Beryllium plasma-facing materials

ITER will use beryllium as a plasma-facing material in the main chamber, covering a total surface area of about 620 m 2 . Given the importance of beryllium erosion and co-deposition for tritium retention in ITER, significant efforts have been made to understand the behaviour of beryllium under fusion-relevant conditions with high particle and heat loads. This paper provides a comprehensive report on the state of knowledge of beryllium behaviour under fusion-relevant conditions: the erosion mechanisms and their consequences, beryllium migration in JET, fuel retention and dust generation. The paper reviews basic laboratory studies, advanced computer simulations and experience from laboratory plasma experiments in linear simulators of plasma–wall interactions and in controlled fusion devices using beryllium plasma-facing components. A critical assessment of analytical methods and simulation codes used in beryllium studies is given. The overall objective is to review the existing set of data with a broad literature survey and to identify gaps and research needs to broaden the database for ITER.

Erosion–deposition↗

Pattern recognition with composite correlation filters designed with multi-object combinatorial optimization

Composite correlation filters are used for solving a wide variety of pattern recognition problems. These filters are given by a combination of several training templates chosen by a designer in an ad hoc manner. In this work, we present a new approach for the design of composite filters based on multi-objective combinatorial optimization. Given a vast search space of training templates, an iterative algorithm is used to synthesize a filter with an optimized performance in terms of several competing criteria. Furthermore, by employing a suggested binary-search procedure a filter bank with a minimum number of filters can be constructed, for a prespecified trade-off of performance metrics. Computer simulation results obtained with the proposed method in recognizing geometrically distorted versions of a target in cluttered and noisy scenes are discussed and compared in terms of recognition performance and complexity with existing state-of-the-art filters.

42 ENGINEERING↗

Poly(sulfur-random-(1,3-diisopropenylbenzene)) based mid-wavelength infrared polarizer: Optical property experimental and theoretical analysis

Development of polymer based mid-wavelength infrared (MWIR) optics has been limited mainly due to high optical loss of organic polymers used in general optical components. In this study, a MWIR polarization grating based on a sulfuric polymer poly(sulfur-random-(1,3-diisopropenylbenzene)) with a low loss in the MWIR range was fabricated using a simple two-step process: imprint and metal deposition. Fourier-transform infrared (FTIR) spectroscopy measurement showed that this polymeric MWIR polarizer selectively transmitted the polarized IR in transverse magnetic (TM) mode over the transverse electric (TE) mode at normal incidence. The measured extinction ratios ( η = The ratio of transmissions in TM and TE) were 208, 176, and 212 at the wavelength of 3, 4, and 5 μm, respectively. The computational simulation and analytical model confirmed that the enhanced TM transmission efficiency and η followed a Fabry-Pérot (FP) resonance mode within the created sulfuric polymer film. This polymeric MWIR polarizer demonstrated a great potential for broader applications in IR photonics to realize low-cost and durable optical components.

42 ENGINEERING↗