Search NASA⌕ Search

SEARCH · Search NASA

Results for “conditional expectation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Surface Processes Control the Fate of Reactive Oxidants Generated by Electrochemical Activation of Hydrogen Peroxide on Stainless-Steel Electrodes

Low-cost stainless-steel electrodes can activate hydrogen peroxide (H 2 O 2 ) by converting it into a hydroxyl radical ( • OH) and other reactive oxidants. At an applied potential of +0.020 V, the stainless-steel electrode produced • OH with a yield that was over an order of magnitude higher than that reported for other systems that employ iron oxides as catalysts under circumneutral pH conditions. Decreasing the applied potential at pH 8 and 9 enhanced the rate of H 2 O 2 loss by shifting the process to a reaction mechanism that resulted in the formation of an Fe(IV) species. Significant metal leaching was only observed under acidic pH conditions (i.e., at pH <6), with the release of dissolved Fe and Cr occurring as the thickness of the passivation layer decreased. Despite the relatively high yield of • OH production under circumneutral pH conditions, most of the oxidants were scavenged by the electrode surface when contaminant concentrations comparable to those expected in drinking water sources were tested. The stainless-steel electrode efficiently removed trace organic contaminants from an authentic surface water sample without contaminating the water with Fe and Cr. With further development, stainless-steel electrodes could provide a cost-effective alternative to other H 2 O 2 activation processes, such as those by ultraviolet light.

42 ENGINEERING↗
DOE OSTI2018

Incorporation Modes of Iodate in Calcite

Iodate incorporation in calcite is a potential sequestration pathway for environmental remediation of radioiodine-contaminated sites (e.g., Hanford Site, WA), but the mechanisms of iodate incorporation are still unknown. Molecular dynamics simulations were performed to determine the local coordination environment, the associated charge compensation schemes, and the tendency for iodate to segregate at calcite surfaces. Charge compensation by substitution of a calcium ion by either a sodium ion or a proton (i.e., the effect of pH), was considered. For charge compensation by sodium ions, a nearest-neighbor position was determined to be energetically favored, whereas for charge compensation by protons, the HIO3 molecule was found to be metastable and the formation of a bicarbonate ion was energetically favored. The iodate ion also showed a preference for the topmost atomic layer of the (104) calcite surface, which dominates the morphology of calcite crystals. Simulated trajectories were used to calculate iodine K-edge extended X-ray absorption fine structure spectra, which matched experimental data of iodate co-precipitated with calcite. The best-fit combination consisted of a significant proportion of surface-segregated iodate ions and included charge compensation by both sodium ions and protons. Therefore, an important implication is that the iodate accumulated at the surface regions of calcite crystals, may undergo mobilization under conditions that promote calcite dissolution. In addition, surface area and pH of the surrounding solution are both expected to strongly affect the extent of iodate incorporation in calcite. Hence, calcite-based iodate remediation strategies need to consider these impacts.

Kerisit, Sebastien N.↗
DOE OSTI2018

27 Al Pulsed Field Gradient, Diffusion–NMR Spectroscopy of Solvation Dynamics and Ion Pairing in Alkaline Aluminate Solutions

Here, pulsed field gradient nuclear magnetic resonance (PFG-NMR) measurements were successfully applied to the 27 Al (I = 5/2) nucleus in concentrated electrolytes to investigate the diffusion of aluminate ions [Al(OH) 4 – ] in simulant high-level nuclear waste (3 M NaOH) between 25 and 85 °C. The temperature-dependent diffusion coefficients obtained from 1 H, 23 Na, and 27 Al PFG-NMR were well fit by a Vogel–Fulcher–Tammann model and a power law equation. Comparison of 27 Al diffusion coefficients of 0.1 M Al(OH) 4 – in ~3 M MOH (where M = Na + , K + , (CH 3 ) 4 N + ) at room temperature varied in agreement with the expected changes in solution viscosity via Stokes–Einstein relationship, confirming that the dominant Al species at these conditions are Al(OH) 4 – monomers. This 27 Al PFG-NMR study extends an established methodology to a previously unexplored nucleus enabling this experimental technique to be leverage for exploring ion transport, speciation, and solution structure in concentrated electrolytes.

Diffusion↗
DOE OSTI2021

Conceptualizing Biogeochemical Reactions With an Ohm's Law Analogy

Abstract In studying problems like plant‐soil‐microbe interactions in environmental biogeochemistry and ecology, one usually has to quantify and model how substrates control the growth of, and interaction among, biological organisms (and abiotic factors, e.g., adsorptive mineral soil surfaces). To address these substrate‐consumer relationships, many substrate kinetics and growth rules have been developed, including the famous Monod kinetics for single‐substrate‐based growth and Liebig's law of the minimum for multiple‐nutrient‐colimited growth. However, the mechanistic basis that leads to these various concepts and mathematical formulations and the implications of their parameters are often quite uncertain. Here, we show that an analogy based on Ohm's law in electric circuit theory is able to unify many of these different concepts and mathematical formulations. In this Ohm's law analogy, a resistor is defined by a combination of consumers’ and substrates’ kinetic traits. In particular, the resistance is equal to the mean first passage time that has been used to derive the Michaelis‐Menten kinetics under substrate replete conditions for a single substrate as well as the predation rate of individual organisms. We further show that this analogy leads to important insights on various biogeochemical problems, such as (a) multiple‐nutrient‐colimited biological growth, (b) denitrification, (c) fermentation under aerobic conditions, (d) metabolic temperature sensitivity, and (e) the legitimacy of Monod kinetics for describing bacterial growth. We expect that our approach will help both modelers and nonmodelers to better understand and formulate hypotheses when studying certain aspects of environmental biogeochemistry and ecology.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Stable Deuterium-Tritium plasmas with improved confinement in the presence of energetic-ion instabilities

Providing stable and clean energy sources is a necessity for the increasing demands of humanity. Energy produced by Deuterium (D) and Tritium (T) fusion reactions, in particular in tokamaks, is a promising path towards that goal. However, there is little experience with plasmas formed by D-T mixtures, since most of the experiments are currently performed in pure D. After more than 20 years, the Joint European Torus (JET) has carried out new D-T experiments with the aim of exploring some of the unique characteristics expected in future fusion reactors, such as the presence of highly energetic ions in low plasma rotation conditions. A new stable, high confinement and impurity-free D-T regime, with reduction of energy losses with respect to D, has been found. Multiscale physics mechanisms critically determine the thermal confinement. These crucial achievements importantly contribute to the establishment of fusion energy generation as an alternative to fossil fuels.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Learned magnetic map cues and two mechanisms of magnetoreception in turtles

Growing evidence indicates that migratory animals exploit the magnetic field of the Earth for navigation, both as a compass to determine direction and as a map to determine geographical position. It has long been proposed that, to navigate using a magnetic map, animals must learn the magnetic coordinates of the destination, yet the pivotal hypothesis that animals can learn magnetic signatures of geographical areas has, to our knowledge, yet to be tested. Here, in this work, we report that an iconic navigating species, the loggerhead turtle ( Caretta caretta ), can learn such information. When fed repeatedly in magnetic fields replicating those that exist in particular oceanic locations, juvenile turtles learned to distinguish magnetic fields in which they encountered food from magnetic fields that exist elsewhere, an ability that might underlie foraging site fidelity. Conditioned responses in this new magnetic map assay were unaffected by radiofrequency oscillating magnetic fields, a treatment expected to disrupt radical-pair-based chemical magnetoreception, suggesting that the magnetic map sense of the turtle does not rely on this mechanism. By contrast, orientation behaviour that required use of the magnetic compass was disrupted by radiofrequency oscillating magnetic fields. The findings provide evidence that two different mechanisms of magnetoreception underlie the magnetic map and magnetic compass in sea turtles.

animal behaviour↗
DOE OSTI2018

Reduced arctic tundra productivity linked with landform and climate change interactions

Arctic tundra ecosystems have experienced unprecedented change associated with climate warming over recent decades. Across the Pan-Arctic, vegetation productivity and surface greenness have trended positively over the period of satellite observation. However, since 2011 these trends have slowed considerably, showing signs of browning in many regions. It is unclear what factors are driving this change and which regions/landforms will be most sensitive to future browning. Here we provide evidence linking decadal patterns in arctic greening and browning with regional climate change and local permafrost-driven landscape heterogeneity. We analyzed the spatial variability of decadal-scale trends in surface greenness across the Arctic Coastal Plain of northern Alaska (~60,000km²) using the Landsat archive (1999–2014), in combination with novel 30m classifications of polygonal tundra and regional watersheds, finding landscape heterogeneity and regional climate change to be the most important factors controlling historical greenness trends. Browning was linked to increased temperature and precipitation, with the exception of young landforms (developed following lake drainage), which will likely continue to green. Spatiotemporal model forecasting suggests carbon uptake potential to be reduced in response to warmer and/or wetter climatic conditions, potentially increasing the net loss of carbon to the atmosphere, at a greater degree than previously expected.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2014

Tunable water desalination across Graphene Oxide Framework membranes

The performance of graphene oxide framework (GOF) membranes for water desalination is assessed using classical molecular dynamics (MD) simulations. The coupling between water permeability and salt rejection GOF membranes is studied as a function of linker concentration n, thickness h and applied pressure DP. The simulations reveal that water permeability in GOF-(n,h) membranes can be tuned from 5 (n = 32 and h = 6.5 nm) to 400 L/cm2/day/MPa (n = 64 and h = 2.5 nm) and follows the law Cnh an . For a given pore size (n = 16 or 32), water permeability of GOF membranes increases when the pore spacing decreases, whereas for a given pore spacing (n = 32 or 64), water permeability increases by up to two orders of magnitude when the pore size increases. Furthermore, for linker concentrations n 32, the high water permeability corresponds to a 100% salt rejection, elevating this type of GOF membrane as an ideal candidate for water desalination. Compared to experimental performance of reverse osmosis membranes, our calculations suggest that under the same conditions of applied pressure and characteristics of membranes (DP 10 MPa and h 100 nm), one can expect a perfect salt rejection coupled to a water permeability two orders of magnitude higher than existing technologies, i.e., from a few cL/cm2/day/MPa to a few L/cm2/day/MPa.

Nicolai, Adrien↗
DOE OSTI2014

Multi-images deconvolution improves signal-to-noise ratio on gated stimulated emission depletion microscopy

Time-gated detection, namely, only collecting the fluorescence photons after a time-delay from the excitation events, reduces complexity, cost, and illumination intensity of a stimulated emission depletion (STED) microscope. In the gated continuous-wave- (CW-) STED implementation, the spatial resolution improves with increased time-delay, but the signal-to-noise ratio (SNR) reduces. Thus, in sub-optimal conditions, such as a low photon-budget regime, the SNR reduction can cancel-out the expected gain in resolution. Here, we propose a method which does not discard photons, but instead collects all the photons in different time-gates and recombines them through a multi-image deconvolution. Our results, obtained on simulated and experimental data, show that the SNR of the restored image improves relative to the gated image, thereby improving the effective resolution.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2015

A polarized Drell-Yan experiment to probe the dynamics of the nucleon sea

In QCD, nucleon spin comes from the sum of the quark spin, gluon spin, and the quark and gluon orbital angular momentum, but how these different components contribute and the interplay among them is not yet understood. For instance, sea quark orbital contribution remains largely unexplored. Measurements of the Sivers function for the sea quarks will provide a probe of the sea quark orbital contribution. The upcoming E1039 experiment at Fermilab will measure the Sivers asymmetry of the sea quarks via the Drell-Yan process using a 120 GeV unpolarized proton beam directed a transversely polarized ammonia target. We report on the status and plans of the E1039 polarized Drell-Yan experiment.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2016

Long term reliability study and life time model of quantum cascade lasers

Here, we present results of quantum cascade laser lifetime tests under various aging conditions including an accelerated life test. The total accumulated life time exceeds 1.5 × 106 device hours. The longest single device aging time was 46 500 hours without failure in the room temperature aging test. Four failures were found in a group of 19 devices subjected to the accelerated life test with a heat-sink temperature of 60 °C and a continuous-wave current of 1 A. Failure mode analyses revealed that thermally induced oxidation of InP in the semi-insulating layer is the cause of failure. An activation energy of 1.2 eV is derived from the dependence of the failure rate on laser core temperature. The mean time to failure of the quantum cascade lasers operating at a typical condition with the current density of 5 kA/cm2 and heat-sink temperature of 25 °C is expected to be 809 000 hours.

Xie, Feng↗
DOE OSTI2012

CONTINUUM HALOS IN NEARBY GALAXIES: AN EVLA SURVEY (CHANG-ES). I. INTRODUCTION TO THE SURVEY

We introduce a new survey to map the radio continuum halos of a sample of 35 edge-on spiral galaxies at 1.5 GHz and 6 GHz in all polarization products. The survey is exploiting the new wide bandwidth capabilities of the Karl G. Jansky Very Large Array (i.e., the Expanded Very Large Array) in a variety of array configurations (B, C, and D) in order to compile the most comprehensive data set yet obtained for the study of radio halo properties. This is the first survey of radio halos to include all polarization products. In this first paper, we outline the scientific motivation of the survey, the specific science goals, and the expected improvements in noise levels and spatial coverage from the survey. Our goals include investigating the physical conditions and origin of halos, characterizing cosmic-ray transport and wind speed, measuring Faraday rotation and mapping the magnetic field, probing the in-disk and extraplanar far-infrared-radio continuum relation, and reconciling non-thermal radio emission with high-energy gamma-ray models. The sample size allows us to search for correlations between radio halos and other properties, including environment, star formation rate, and the presence of active galactic nuclei. In a companion paper (Paper II) we outline the data reduction steps and present the first results of the survey for the galaxy, NGC 4631.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Numerical simulations of colliding jets in an external wind: application to 3C 75

ABSTRACT The radio galaxy 3C 75 is remarkable because it contains a pair of radio-loud active galaxies, each of which produces a two-sided jet, with the jet beams appearing to collide and merge to the west of the galaxies. Motivated by 3C 75, we have conducted three-dimensional hydrodynamic simulations of jet collisions. We have extended previous studies by modelling the physical properties of the cluster atmosphere, including an external wind, and using realistic jet powers obtained from observational data. We are able to produce a morphology similar to that of 3C 75. The simulations imply that direct contact between the bulk jet flows on the west of the source is required to produce a morphology consistent with 3C 75. We quantify how the merging jets decelerate, how the wind deflects the jets and cocoons, the entrainment of intra-cluster material into the cocoons, the cocoon energetics, and how the jet interactions generate enstrophy. By comparing simulations of pairs of two-sided jets with those of single two-sided sources, we determine how the interaction between two bipolar jets changes their evolution. The unprecedented sensitivity and angular resolution of upcoming observatories will lead to the detection of many more complex sources at high redshift, where interacting jets are expected to be more numerous. The morphology of these complex sources can provide significant insight into the conditions in their environments.

Musoke, G.↗
DOE OSTI2024

Strong-Field Bloch Electron Interferometry for Band-Structure Retrieval

When Bloch electrons in a solid are exposed to a strong optical field, they are coherently driven in their respective bands where they acquire a quantum phase as the imprint of the band shape. If an electron approaches an avoided crossing formed by two bands, it may be split by undergoing a Landau-Zener transition. We here employ subsequent Landau-Zener transitions to realize strong-field Bloch electron interferometry (SFBEI), allowing us to reveal band structure information. In particular, we measure the Fermi velocity (band slope) of graphene in the vicinity of the K points as 1.07±0.04 nm fs –1 . As a result, we expect SFBEI for band structure retrieval to apply to a wide range of material systems and experimental conditions, making it suitable for studying transient changes in band structure with femtosecond temporal resolution at ambient conditions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2013

Dosimetric accuracy of a deterministic radiation transport based {sup 192}Ir brachytherapy treatment planning system. Part III. Comparison to Monte Carlo simulation in voxelized anatomical computational models

Purpose: To compare TG43-based and Acuros deterministic radiation transport-based calculations of the BrachyVision treatment planning system (TPS) with corresponding Monte Carlo (MC) simulation results in heterogeneous patient geometries, in order to validate Acuros and quantify the accuracy improvement it marks relative to TG43. Methods: Dosimetric comparisons in the form of isodose lines, percentage dose difference maps, and dose volume histogram results were performed for two voxelized mathematical models resembling an esophageal and a breast brachytherapy patient, as well as an actual breast brachytherapy patient model. The mathematical models were converted to digital imaging and communications in medicine (DICOM) image series for input to the TPS. The MCNP5 v.1.40 general-purpose simulation code input files for each model were prepared using information derived from the corresponding DICOM RT exports from the TPS. Results: Comparisons of MC and TG43 results in all models showed significant differences, as reported previously in the literature and expected from the inability of the TG43 based algorithm to account for heterogeneities and model specific scatter conditions. A close agreement was observed between MC and Acuros results in all models except for a limited number of points that lay in the penumbra of perfectly shaped structures in the esophageal model, or at distances very close to the catheters in all models. Conclusions: Acuros marks a significant dosimetry improvement relative to TG43. The assessment of the clinical significance of this accuracy improvement requires further work. Mathematical patient equivalent models and models prepared from actual patient CT series are useful complementary tools in the methodology outlined in this series of works for the benchmarking of any advanced dose calculation algorithm beyond TG43.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2016

Are Lock-Free Concurrent Algorithms Practically Wait-Free?

Lock-free concurrent algorithms guarantee that some concurrent operation will always make progress in a finite number of steps. Yet programmers prefer to treat concurrent code as if it were wait-free, guaranteeing that all operations always make progress. Unfortunately, designing wait-free algorithms is generally a very complex task, and the resulting algorithms are not always efficient. Although obtaining efficient wait-free algorithms has been a long-time goal for the theory community, most nonblocking commercial code is only lock-free. This article suggests a simple solution to this problem. We show that for a large class of lock-free algorithms, under scheduling conditions that approximate those found in commercial hardware architectures, lock-free algorithms behave as if they are wait-free. In other words, programmers can continue to design simple lock-free algorithms instead of complex wait-free ones, and in practice, they will get wait-free progress. Our main contribution is a new way of analyzing a general class of lock-free algorithms under a stochastic scheduler. Our analysis relates the individual performance of processes to the global performance of the system using Markov chain lifting between a complex per-process chain and a simpler system progress chain. We show that lock-free algorithms are not only wait-free with probability 1 but that in fact a general subset of lock-free algorithms can be closely bounded in terms of the average number of steps required until an operation completes. Here, to the best of our knowledge, this is the first attempt to analyze progress conditions, typically stated in relation to a worst-case adversary, in a stochastic model capturing their expected asymptotic behavior.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2018

Equal channel angular extrusion for bulk processing of Fe–Co–2V soft magnetic alloys, part II: Texture analysis and magnetic properties

In Part I, equal channel angular extrusion (ECAE) was demonstrated as a novel, simple-shear deformation process for producing bulk forms of the low ductility Fe–Co–2V (Hiperco 50A®) soft ferromagnetic alloy with refined grain sizes. Microstructures and mechanical properties were discussed. In this Part II contribution, the crystallographic textures and quasi-static magnetic properties of ECAE-processed Hiperco were characterized. The textures were of a simple-shear character defined by partial {110} and <111> fibers inclined relative to the extrusion direction, in agreement with the expectations for simple-shear deformation textures of BCC metals. These textures were observed throughout all processing conditions and only slightly reduced in intensity by subsequent recrystallization heat treatments. Characterization of the magnetic properties revealed a lower coercivity and higher permeability for ECAE-processed Hiperco specimens relative to the conventionally processed and annealed Hiperco bar. In conclusion, the effects of the resultant microstructure and texture on the coercivity and permeability magnetic properties are discussed.

36 MATERIALS SCIENCE↗