Search NASA⌕ Search

SEARCH · Search NASA

Results for “data dependencies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

TDCOSMO. VII. Boxyness/discyness in lensing galaxies: Detectability and impact on H 0

In the context of gravitational lensing, the density profile of lensing galaxies is often considered to be perfectly elliptical. Potential angular structures are generally ignored, except to explain flux ratios of point-like sources (i.e. flux ratio anomalies). Surprisingly, the impact of azimuthal structures on extended images of the source has not been characterised, nor has its impact on the H 0 inference. We address this task by creating mock images of a point source embedded in an extended source and lensed by an elliptical galaxy on which multipolar components are added to emulate boxy or discy isodensity contours. Modelling such images with a density profile free of angular structure allows us to explore the detectability of image deformation induced by the multipoles in the residual frame. Multipole deformations are almost always detectable for our highest signal-to-noise ratio (S/N) mock data. However, the detectability depends on the lens ellipticity and Einstein radius, on the S/N of the data, and on the specific lens modelling strategy. Multipoles also introduce small changes to the time-delays. We therefore quantify how undetected multipoles would impact H 0 inference. When no multipoles are detected in the residuals, the impact on H 0 for a given lens is in general less than a few k ms -1 Mpc -1 , but in the worst-case scenario, combining low S/N in the ring and large intrinsic boxyness or discyness, the bias on H0 can reach 10-12 km s -1 Mpc -1 . If we now look at the inference on H 0 from a population of lensing galaxies with a distribution of multipoles representative of what is found in the light profile of elliptical galaxies, we find a systematic bias on H 0 of less than 1%. A comparison of our mock systems to the state-of-the-art time-delay lens sample studied by the H0LiCOW and TDCOSMO collaborations indicates that multipoles are currently unlikely to be a source of substantial systematic bias on the inferred value of H 0 from time-delay lenses.

79 ASTRONOMY AND ASTROPHYSICS↗

An Efficient Variable-Length Data-Compression Scheme

Adaptive variable-length coding scheme for compression of stream of independent and identically distributed source data involves either Huffman code or alternating run-length Huffman (ARH) code, depending on characteristics of data. Enables efficient compression of output of lossless or lossy precompression process, with speed and simplicity greater than those of older coding schemes developed for same purpose. In addition, scheme suitable for parallel implementation on hardware with modular structure, provides for rapid adaptation to changing data source, compatible with block orientation to alleviate memory requirements, ensures efficiency over wide range of entropy, and easily combined with such other communication schemes as those for containment of errors and for packetization.

Cheung, Kar-Ming↗

Providing the Persistent Data Storage in a Software Engineering Environment Using Java/COBRA and a DBMS

An investigation was undertaken to build the software foundation for the WHERE (Web-based Hyper-text Environment for Requirements Engineering) project. The TCM (Toolkit for Conceptual Modeling) was chosen as the foundation software for the WHERE project which aims to provide an environment for facilitating collaboration among geographically distributed people involved in the Requirements Engineering process. The TCM is a collection of diagram and table editors and has been implemented in the C++ programming language. The C++ implementation of the TCM was translated into Java in order to allow the editors to be used for building various functionality of the WHERE project; the WHERE project intends to use the Web as its communication back- bone. One of the limitations of the translated software (TcmJava), which militated against its use in the WHERE project, was persistent data management mechanisms which it inherited from the original TCM; it was designed to be used in standalone applications. Before TcmJava editors could be used as a part of the multi-user, geographically distributed applications of the WHERE project, a persistent storage mechanism must be built which would allow data communication over the Internet, using the capabilities of the Web. An approach involving features of Java, CORBA (Common Object Request Broker), the Web, a middle-ware (Java Relational Binding (JRB)), and a database server was used to build the persistent data management infrastructure for the WHERE project. The developed infrastructure allows a TcmJava editor to be downloaded and run from a network host by using a JDK 1.1 (Java Developer's Kit) compatible Web-browser. The aforementioned editor establishes connection with a server by using the ORB (Object Request Broker) software and stores/retrieves data in/from the server. The server consists of a CORBA object or objects depending upon whether the data is to be made persistent on a single server or multiple servers. The CORBA object providing the persistent data server is implemented using the Java progranu-ning language. It uses the JRB to store/retrieve data in/from a relational database server. The persistent data management system provides transaction and user management facilities which allow multi-user, distributed access to the stored data in a secure manner.

Dhaliwal, Swarn S.↗

Cryo-Temp Data Logger

Biological experiments on the ISS are frequently frozen at ultra-low temperatures on orbit prior to return to Earth for analysis. Recording temperatures during the freezing process, and subsequent handling to the point of post-flight processing, can provide important information of sample integrity to the scientist. The MadgeTech Cryo-Temp Data Logger has been modified for space flight applications by the Payload Development Team at Kennedy Space Center. This ultra-low temperature data logger is rated for temperatures from -86 C to +35 C with 0.1 C resolution and +/-1 C accuracy, but has been successfully tested at Kennedy Space Centers Cryogenic Lab down to -100 C. The logger provides date and time stamped temperature recordings and can be set with logging intervals from 5 seconds up to 30 minutes using the MadgeTech Data Logger Software. Data can be recorded, depending on logging interval, for greater than 90 days. The Cryo-Temp Data logger will first be flown on Space X-12 in the BRIC-Petri Dish Fixation Unit (PDFU) canister hardware, recording temperature data for a Space Life and Physical Sciences (SLPS) flight experiment. The modified Cryo-Temp Data Logger is small in size (Figure 1) and is the ideal temperature monitoring solution for any application involving independent temperature data logging.

Logger↗

Mars-Gram Validation with Mars Global Surveyor Data

Mars Global Reference Atmospheric Model (Mars-GRAM 2001) is an engineering-level Mars atmosphere model widely used for many b4ars mission applications. From 0-80 km, it is based on NASA Ames Mars General Circulation Model (MGCM), while above 80 km it is based on University of Arizona Mars Thermospheric General Circulation Model. Mars-GRAM 2001 and MGCM use surface topography from Mars Global Surveyor Mars Orbiting Laser Altimeter (MOLA). Validation studies are described comparing Mars-GRAM with Mars Global Surveyor Radio Science (RS) and Thermal Emission Spectrometer (TES) data. RS data from 2480 profiles were used, covering latitudes 75deg S to 72deg N, surface to approx. 40 km, for seasons ranging from areocentric longitude of Sun (Ls) = 70-160deg and 265-310deg. RS data spanned a range of local times, mostly 0-9 hours and 18-24 hours. For interests in aerocapture and precision landing, comparisons concentrated on atmospheric density. At a fixed height of 20 km, measured RS density varied by about a factor of 2.5 over the range of latitudes and Ls values observed. Evaluated at matching positions and times, average RS/Mars-GRAM density ratios were generally lf0.05, except at heights above approx. 25 km and latitudes above approx.50deg N. Average standard deviation of RS/Mars-GRAM density ratio was 6%. TES data were used covering surface to approx. 40 km, over more than a full Mars year (February, 1999 - June, 2001, just before start of Mars global dust storm). Depending on season, TES data covered latitudes 85deg S to 85deg N. Most TES data were concentrated near local times 2 hours and 14 hours. Observed average TES/Mars-GRAM density ratios were generally 1+/-0.05, except at high altitudes (15-30 km, depending on season) and high latitudes (> 45deg N), or at most altitudes in the southern hemisphere at Ls approx. 90 and 180deg). Compared to TES averages for a given latitude and season, TES data had average density standard deviation about the mean of approx. 6.5-10.5% (varying with height) for all data, or approx. 5- 12%, depending on time of day and dust optical depth. Average standard deviation of TES/Mars-GRAM density ratio was 8.9% for local time 2 hours and 7.1% for 1o:al time 14 hours. Thus standard deviation of observed TES/Mars-GRAM density ratio, evaluated at matching positions and times, is about the same as the standard deviation of TES data about the TES mean value at a given position and season.

Justus, C. G.↗

Issues in knowledge representation to support maintainability: A case study in scientific data preparation

Scientific data preparation is the process of extracting usable scientific data from raw instrument data. This task involves noise detection (and subsequent noise classification and flagging or removal), extracting data from compressed forms, and construction of derivative or aggregate data (e.g. spectral densities or running averages). A software system called PIPE provides intelligent assistance to users developing scientific data preparation plans using a programming language called Master Plumber. PIPE provides this assistance capability by using a process description to create a dependency model of the scientific data preparation plan. This dependency model can then be used to verify syntactic and semantic constraints on processing steps to perform limited plan validation. PIPE also provides capabilities for using this model to assist in debugging faulty data preparation plans. In this case, the process model is used to focus the developer's attention upon those processing steps and data elements that were used in computing the faulty output values. Finally, the dependency model of a plan can be used to perform plan optimization and runtime estimation. These capabilities allow scientists to spend less time developing data preparation procedures and more time on scientific analysis tasks. Because the scientific data processing modules (called fittings) evolve to match scientists' needs, issues regarding maintainability are of prime importance in PIPE. This paper describes the PIPE system and describes how issues in maintainability affected the knowledge representation used in PIPE to capture knowledge about the behavior of fittings.

Chien, Steve↗

Intelligent assistance in scientific data preparation

Scientific data preparation is the process of extracting usable scientific data from raw instrument data. This task involves noise detection (and subsequent noise classification and flagging or removal), extracting data from compressed forms, and construction of derivative or aggregate data (e.g. spectral densities or running averages). A software system called PIPE provides intelligent assistance to users developing scientific data preparation plans using a programming language called Master Plumber. PIPE provides this assistance capability by using a process description to create a dependency model of the scientific data preparation plan. This dependency model can then be used to verify syntactic and semantic constraints on processing steps to perform limited plan validation. PIPE also provides capabilities for using this model to assist in debugging faulty data preparation plans. In this case, the process model is used to focus the developer's attention upon those processing steps and data elements that were used in computing the faulty output values. Finally, the dependency model of a plan can be used to perform plan optimization and run time estimation. These capabilities allow scientists to spend less time developing data preparation procedures and more time on scientific analysis tasks.

Chien, Steve↗

Investigation of Neutron Detector Response to Varying Temperature and Water Content for Geothermal Applications

Nuclear logging techniques have been used for oil well logging applications for decades. The basic principle is to use a neutron and/or photon source and neutron and photon detectors for characterization purposes. Although the technology has matured, it is not directly applicable to geothermal logging due to even more challenging environmental conditions, both in terms of temperature and pressure. For geothermal logging, the operating temperature can go up to 376 C for depths up to 10,000 km. In this paper, the preliminary computational results for thermal neutron detector response for varying temperature and water content for geothermal applications are presented. In this summary, preliminary results for neutron detector response for varying formation temperature and water content are presented. The analysis is performed for a steady state source (AmBe) and time dependent source (PNG) in pulsed mode. The computational results show significant sensitivity to water content as well as temperature changes for both steady state and time dependent measurements. As expected, the most significant change is due to the temperature change for S({alpha}, {beta}) nuclear data instead of individual isotope cross sections for the formation. Clearly, this is partially because of the fact that strong absorbers (i.e., chlorine) are not taken into account for the analysis at this time. The computational analysis was performed using the temperature dependent data in the ENDF/B-VII libraries, supplied with MCNP. Currently, the data for intermediate temperatures are being generated using NJOY and validated. A series of measurements are planned to validate the computational results. Further measurements are planned to determine the neutron and photon detector response as a function of temperature. The tests will be performed for temperatures up to 400 C.

02 PETROLEUM↗

Regression Analysis and Calibration Recommendations for the Characterization of Balance Temperature Effects

Analysis and use of temperature-dependent wind tunnel strain-gage balance calibration data are discussed in the paper. First, three different methods are presented and compared that may be used to process temperature-dependent strain-gage balance data. The first method uses an extended set of independent variables in order to process the data and predict balance loads. The second method applies an extended load iteration equation during the analysis of balance calibration data. The third method uses temperature-dependent sensitivities for the data analysis. Physical interpretations of the most important temperature-dependent regression model terms are provided that relate temperature compensation imperfections and the temperature-dependent nature of the gage factor to sets of regression model terms. Finally, balance calibration recommendations are listed so that temperature-dependent calibration data can be obtained and successfully processed using the reviewed analysis methods.

wind tunnel test↗

Quasiharmonic analysis of protein energy landscapes from pressure-temperature molecular dynamics simulations

Positional fluctuations of an atom in a protein can be described as motion in an effective local energy minimum created by the surrounding protein atoms. The dependence of atomic fluctuations on both temperature (T) and pressure (P) has been used to probe the nature of these minima, which are generally described as harmonic in experiments such as x-ray crystallography and neutron scattering. Here, a quasiharmonic analysis method is presented in which the P-T dependence of atomic fluctuations is in terms of an intrinsic isobaric thermal expansivity αP and an intrinsic isothermal compressibility κT. The method is tested on previously reported mean-square displacements from P-T molecular dynamics simulations of lysozyme, which were interpreted to have a pressure-independent dynamical transition Tg near 200 K and a change in the pressure dependence near 480 MPa. Our quasiharmonic analysis of the same data shows that the P-T dependence can be described in terms of αP and κT where below Tg, the temperature dependence is frozen at the Tg value. In addition, the purported transition at 480 MPa is reinterpreted as a consequence of the pressure dependence of Tg and the quasiharmonic frequencies. The former also indicates that barrier heights between substates are pressure dependent in these data. Furthermore, the insights gained from this quasiharmonic analysis, which was of the energy landscape near the native state of a protein, suggest that similar analyses of other simulations may be useful in understanding such phenomena as pressure-induced protein unfolding.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Geospatial characterization of low-temperature heating and cooling demand in residential, commercial, manufacturing, agricultural, and data center sectors for potential geothermal applications in the United States

Thermal demand for heating and cooling has been predominantly supplied by fossil fuel combustion in the United States, although low-carbon alternatives are extensively available including geothermal, solar thermal, and waste heat. Here, this study analyzed end-use energy consumption, fuel expenditure, and data center commissioned power data to geospatially characterize the U.S. low-temperature heating and cooling demand at the county level in residential, commercial, manufacturing, agricultural, and data center sectors and understand potential opportunities for geothermal applications. In the analysis, the regional-scale energy consumption data was incorporated with system efficiencies to address actual demand and was then disaggregated with weighting factors to the county level. The results indicated that total low-temperature heating and cooling demand is 16.7 EJ, combining heating demand of 10.8 EJ and cooling demand of 5.9 EJ. Overall, 59.9 % (10 EJ) of the low-temperature heating and cooling demand occurred in the residential sector. The heating and cooling demand visualized in maps represented that the geospatial distribution of heating and cooling demand in the residential and commercial sectors is governed by the number of housing units and climate zone designations, while heating and cooling demand in the manufacturing, agricultural, and data center sectors is dependent on the number and location of facilities. The results also demonstrated that geothermal heat pumps are broadly used in the residential and commercial sectors for heating and cooling in the U.S. Midwest, South, and Northeast regions but are limited in the West, implying great decarbonization potential in the future.

15 GEOTHERMAL ENERGY↗

Latitudinal Density Dependence of Magnetic Field Lines Inferred from Polar Plasma Wave Data

Using observations of the electron density, n(sub e), based on measurement of the upper hybrid resonance frequency by the Polar spacecraft Plasma Wave Instrument, we have examined the radial density dependence along field lines in the outer plasmasphere and the near plasmatrough. Sampled L values range from 2.5 to 6.6. Our technique depends on the fact that Polar crosses particular L values at two different points with different radial distance R. In our plasmaspheric data set (n(sub e) > 100/cm3), we find that on average n(sub e) is flat along field lines from the equator up to the latitudes sampled by Polar (R approximately equal to or > 2.0). In the plasmatrough data set (n(sub e) < 100/cm-3), there is on average a mild radial dependence n(sub e) varies as R(exp -1.7).

Goldstein, J.↗

Low-Temperature Ionic Conductivity Enhanced by Disrupted Ice Formation in Polyampholyte Hydrogels

Here, the phase behavior of water in hydrogels has a broad impact on many health and energy applications. Our previous study showed that polyampholyte hydrogel has the potential to be used as an aqueous gel electrolyte in electrochemical storage devices at -30 °C due to enhanced low-temperature conductivity. In this study, we detail the impact polymer structure has on this enhanced conductivity, explaining this finding with a model charge-balanced polyampholyte, poly(4-vinylbenzenesulfonate- co -[3-(methacryloylam ino)propyl] trimethylammonium chloride), a hydrogel whose polymer and water structures are probed by variable-temperature SAXS, WAXS, and solid-state NMR spectroscopy. SAXS results at room temperature indicate a networked globule structure in the charge-balanced polyampholyte hydrogels. The globular radius of gyration is ~ 2.5 nm, whereas the globular size and its clustering structure are dependent on synthesis parameters. Variable-temperature SAXS data reveal a temperature-dependent structure evolution of the polyampholyte hydrogel. An interconnected globular network structure of polymer-rich phase at low temperature, observed by electron microscopy, is suggested to preserve ion-conducting channels of nonfrozen water molecules at low temperatures. This hypothesis is further supported by solid-state NMR spectroscopy. Together these findings provide macromolecular- and molecular-level insight that may be used to design gel electrolytes for enhanced low-temperature performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The use of workflows in the design and implementation of complex experiments in macromolecular crystallography

A powerful and easy-to-use workflow environment has been developed at the ESRF for combining experiment control with online data analysis on synchrotron beamlines. This tool provides the possibility of automating complex experiments without the need for expertise in instrumentation control and programming, but rather by accessing defined beamline services. The automation of beam delivery, sample handling and data analysis, together with increasing photon flux, diminishing focal spot size and the appearance of fast-readout detectors on synchrotron beamlines, have changed the way that many macromolecular crystallography experiments are planned and executed. Screening for the best diffracting crystal, or even the best diffracting part of a selected crystal, has been enabled by the development of microfocus beams, precise goniometers and fast-readout detectors that all require rapid feedback from the initial processing of images in order to be effective. All of these advances require the coupling of data feedback to the experimental control system and depend on immediate online data-analysis results during the experiment. To facilitate this, a Data Analysis WorkBench (DAWB) for the flexible creation of complex automated protocols has been developed. Here, example workflows designed and implemented using DAWB are presented for enhanced multi-step crystal characterizations, experiments involving crystal reorientation with kappa goniometers, crystal-burning experiments for empirically determining the radiation sensitivity of a crystal system and the application of mesh scans to find the best location of a crystal to obtain the highest diffraction quality. Beamline users interact with the prepared workflows through a specific brick within the beamline-control GUI MXCuBE.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Early Time-Series Classification with Reliability Guarantee

We consider the early classification of (incomplete) time-series data given a complete time series training set. The early classification problem arises naturally when test sample data is collected over time, or when costs must be incurred to collect the data. For example, for missile defense, it is important to determine the target type long before it reaches its target. A practical goal is to assign a class label as soon as enough data is available to make a good decision. This objective is formalized through the notion of reliability—the probability that a label assigned to the early, incomplete data matches that assigned to the complete data, and we propose a method to classify incomplete data only if a user-specified reliability threshold is met. Our approach models the complete data as a random variable whose distribution is dependent on the current incomplete data and the training data. The method differs from standard strategies in that our focus is on determining the reliability of the early classification decision, not only the accuracy. Proposed methods are tested on a set of open-domain time-series datasets; where the goal is to classify the time-series as early as possible while still guaranteeing that the reliability threshold is met.

Anderson, Hyrum S.↗

Classifying with confidence from incomplete information.

For this paper, we consider the problem of classifying a test sample given incomplete information. This problem arises naturally when data about a test sample is collected over time, or when costs must be incurred to compute the classification features. For example, in a distributed sensor network only a fraction of the sensors may have reported measurements at a certain time, and additional time, power, and bandwidth is needed to collect the complete data to classify. A practical goal is to assign a class label as soon as enough data is available to make a good decision. We formalize this goal through the notion of reliability—the probability that a label assigned given incomplete data would be the same as the label assigned given the complete data, and we propose a method to classify incomplete data only if some reliability threshold is met. Our approach models the complete data as a random variable whose distribution is dependent on the current incomplete data and the (complete) training data. The method differs from standard imputation strategies in that our focus is on determining the reliability of the classification decision, rather than just the class label. We show that the method provides useful reliability estimates of the correctness of the imputed class labels on a set of experiments on time-series data sets, where the goal is to classify the time-series as early as possible while still guaranteeing that the reliability threshold is met.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Smokescreen: A Python package for data vector blinding and encryption in cosmological analyses

Smokescreen is an open-source Python library for data-vector concealment (blinding) in cosmological analyses. Data-vector blinding works by applying cosmology-dependent shifts to the observed data vector, moving it away from the true cosmological signal without affecting its statistical properties, so that analysts cannot infer the true result until the analysis is frozen and the blinding is lifted. The package computes these shifts using Firecrown likelihoods applied to data vectors stored in the SACC format, ensuring that the theoretical model used for blinding is identical to that used for inference whilst remaining agnostic to the specific observable being blinded. To prevent accidental unblinding, the original SACC file, containing the true cosmology, is encrypted. Although developed for the Vera C. Rubin Observatory Legacy Survey of Space and Time (LSST), Smokescreen is applicable to any experiment using Firecrown likelihoods and the SACC data format.

Loureiro, Arthur [Stockholm U., OKC; Imperial Coll↗

A Unified Tracer Analysis of DESI DR2 Baryon Acoustic Oscillations

We improve upon previous efforts to optimally combine overlapping galaxy samples in the DESI baryon acoustic oscillation analysis. By weighting each galaxy by its linear bias, overlapping galaxies are combined into a single, unified catalog, naturally avoiding double counting of cosmic volume and including all auto- and cross- information at the catalog level. Improvements over the previous effort include the addition of QSO out to $z=1.6$ to account for all overlapping DR2 tracers and redshift-dependent bias treatment to improve reconstruction. We report distance measurements using this unified tracer, and find them to be highly consistent with the baseline DR2 BAO analysis. We also test for tracer-dependent systematics within the DESI data, and find no evidence of tracer-dependent systematics within $0.8

Sanders, N. [Ohio U., Athens] (ORCID:0009000800202↗