Search NASA⌕ Search

SEARCH · Search NASA

Results for “data structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

A system for the input and storage of data in the Besm-6 digital computer

Computer programs used for the decoding and storage of large volumes of data on the the BESM-6 computer are described. The following factors are discussed: the programming control language allows the programs to be run as part of a modular programming system used in data processing; data control is executed in a hierarchically built file on magnetic tape with sequential index storage; and the programs are not dependent on the structure of the data.

Schmidt, K.↗
NASA NTRS1975

HAL/SM system functional design specification

The functional design of a preprocessor, and subsystems is described. A structure chart and a data flow diagram are included for each subsystem. Also a group of intermodule interface definitions (one definition per module) is included immediately following the structure chart and data flow for a particular subsystem. Each of these intermodule interface definitions consists of the identification of the module, the function the module is to perform, the identification and definition of parameter interfaces to the module, and any design notes associated with the module. Also described are compilers and computer libraries.

Ross, C.↗
NASA NTRS1984

Computer control for automated flight test maneuvering

The application of an experimental flight test maneuver autopilot test technique for collecting aerodynamic and structural flight research data on a highly maneuverable aircraft is described in this paper. This technique, which was developed to increase the quality and quantity of data obtained during flight test, was applied to the highly maneuverable aircraft technology (HiMAT) vehicle. A primary flight experiment was to verify the design techniques used to develop the HiMAT aerodynamics and structures. This required the performance of maneuvers for collection of large quantities of high-quality pressure distribution, loads, and wing and canard deflection data. Flight data obtained while executing these research maneuvers are presented to demonstrate the effectiveness of this new technique.

Duke, E. L.↗
NASA NTRS1986

Welcome to 'ENVIRONET' - A user friendly environment data base for the Shuttle

NASA recognized the need for a user-friendly, computer-based, payload-bay environment data base for potential users of the Shuttle. This led to the establishment of a working group made up of members from NASA, ESA, industry, and academia. The working group is chartered to establish a user-friendly data base with accessibility for all potential Shuttle users. The purpose of the data base is to aid users in understanding the Shuttle environments encountered during the various Shuttle mission phases. Spacelab and other carriers are included in the data base. The organizational structure, background, and an introductory description of the data base are presented.

Marian, Edward J.↗
NASA NTRS2011

An Analysis and Classification of Dying AGB Stars Transitioning to Pre-Planetary Nebulae

The principal objective of the project is to understand part of the life and death process of a star. During the end of a star's life, it expels its mass at a very rapid rate. We want to understand how these Asymptotic Giant Branch (AGB) stars begin forming asymmetric structures as they start evolving towards the planetary nebula phase and why planetary nebulae show a very large variety of non-round geometrical shapes. To do this, we analyzed images of just-forming pre-planetary nebula from Hubble surveys. These images were run through various image correction processes like saturation correction and cosmic ray removal using in-house software to bring out the circumstellar structure. We classified the visible structure based on qualitative data such as lobe, waist, halo, and other structures. Radial and azimuthal intensity cuts were extracted from the images to quantitatively examine the circumstellar structure and measure departures from the smooth spherical outflow expected during most of the AGB mass-loss phase. By understanding the asymmetrical structure, we hope to understand the mechanisms that drive this stellar evolution.

mass loss↗
NASA NTRS2003

Flow Control Analysis on the Hump Model with RANS Tools

A concerted effort is underway at NASA Langley Research Center to create a benchmark for Computational Fluid Dynamic (CFD) codes. both unstructured and structured, against a data set for the hump model with actuation. The hump model was tested in the NASA Langley 0.3-m Transonic Cryogenic Tunnel. The CFD codes used for the analyses are the FUN2D (Full Unstructured Navier-Stokes 2-Dimensional) code, the structured TLNS3D (Thin-Layer Navier-Stokes 3-Dimensional) code, and the structured CFL3D code, all developed at NASA Langley. The current investigation uses the time-accurate Reynolds-Averaged Navier-Stokes (RANS) approach to predict aerodynamic performance of the active flow control experimental database for the hump model. Two-dimensional computational results verified that steady blowing and suction and oscillatory suction/blowing can be used to significantly reduce the separated flow region on the model. Discrepancies do exist between the CFD results and experimental data in the region downstream of the slot with the largest differences in the oscillatory cases. Overall, the structured CFD codes exhibited similar behavior with each other for a wide range of control conditions, with the unstructured FUN2D code showing moderately different results in the separated flow region for the suction and oscillatory cases.

Viken, Sally A.↗
NASA NTRS2020

Testing Densities and Refractive Indices of Extraterrestrial Ice Components Using Molecular Structures - Organic Compounds and Molar Refractions

The use of infrared spectra to determine molecular abundances of icy astronomical objects and to study their chemistry requires laboratory measurements of reference spectra and related quantities, such as the index of refraction (n) and density (p) of candidate ices. Here we present new n and p measurements on ices involving over 30 C-, H-, and O-containing compounds, both acyclic and cyclic, representing seven chemical families. We examine the results in a way that is rare in the astrochemical literature, namely one in which data from an ice formed from molecules of a particular chemical family are compared to measurements on another member of the same family, such as of a homologous series or a pair of isomers. Apart from the intrinsic usefulness of the n and data, a structure-based comparison can help establish trends and identify possibly spurious results. As liquid-phase data sometimes are used in low-temperature astrochemical work in the absence of solid-phase measurements, we compare our new ice results to those for the corresponding room-temperature liquids. We emphasize the use of our n and p data to compute the molar refraction (RM) for each of our ices, and how the resulting RM values compare to those expected from molecular structures. The use of calculated RM values and measured n values to calculate ice densities, in the absence of direct measurements, is also addressed.

Hudson, Reggie L.↗
NASA NTRS1976

A simulation for gravity fine structure recovery from low-low GRAVSAT SST data

Covariance error analysis techniques were applied to investigate estimation strategies for the low-low SST mission for accurate local recovery of gravitational fine structure, considering the aliasing effects of unsolved for parameters. A 5 degree by 5 degree surface density block representation of the high order geopotential was utilized with the drag-free low-low GRAVSAT configuration in a circular polar orbit at 250 km altitude. Recovery of local sets of density blocks from long data arcs was found not to be feasible due to strong aliasing effects. The error analysis for the recovery of local sets of density blocks using independent short data arcs demonstrated that the estimation strategy of simultaneously estimating a local set of blocks covered by data and two "buffer layers" of blocks not covered by data greatly reduced aliasing errors.

Estes, R. H.↗
NASA NTRS1993

Application of new electro-optic technology to Space Station Freedom data management system

A low risk design methodology to permit the local bus structures to support increased data carrying capacities and to speed messages and data flow between nodes or stations on the Space Station Freedom Data Management System in anticipation of growing requirements was evaluated and recommended. The recommended design employs a collateral fiber optic technique that follows a NATO avionic standard that is developed, tested, and available. Application of this process will permit a potential 25 fold increase in data transfer performance on the local wire bus network with a fiber optic network, maintaining the functionality of the low-speed bus and supporting all of the redundant transmission and fault detection capabilities designed into the existing system. The application of wavelength division multiplexing (WDM) technology to both the local data bus and global data bus segments of the Data Management System to support anticipated additional highspeed data transmission requirements was also examined. Techniques were examined to provide a dual wavelength implementation of the fiber optic collateral networks. This dual wavelength implementation would permit each local bus to support two simultaneous high-speed transfers on the same fiber optic bus structure and operate within the limits of the existing protocol standard. A second WDM study examined the use of spectral sliced technology to provide a fourfold increase in the Fiber Distributed Data Interface (FDDI) global bus networks without requiring modifications to the existing installed cable plant. Computer simulations presented indicated that this data rate improvement can be achieved with commercially available optical components.

Husbands, C. R.↗
NASA NTRS2008

Stochastic Transport Theory for Investigating the Three-Dimensional Canopy Structure from Space Measurements

Radiation reflected from vegetation canopies exhibits high spatial variation. Satellite-borne sensors measure the mean intensities emanating from heterogeneous vegetated pixels. The theory of radiative transfer in stochastic media provides the most logical linkage between satellite observations and the three-dimensional canopy structure through a closed system of simple equations which contains the mean intensity and higher statistical moments directly as its unknowns. Although this theory has been a highly active research field in recent years, its potential for satellite remote sensing of vegetated surfaces has not been fully realized because of the lack of models of a canopy pair-correlation function that the stochastic radiative transfer equations require. The pair correlation function is defined as the probability of finding simultaneously phytoelements at two points. This paper presents analytical and Monte Carlo generated pair correlation functions. Theoretical and numerical analyses show that the spatial correlation between phytoelements is primarily responsible for the effects of the three-dimensional canopy structure on canopy reflective and absorptive properties. The pair correlation function, therefore, is the most natural and physically meaningful measure of the canopy structure over a wide range of scales. The stochastic radiative transfer equations naturally admit this measure and thus provide a powerful means to investigate the three-dimensional canopy structure from space. Canopy reflectances predicted by the stochastic equations are assessed by comparisons with the PARABOLA measurements from coniferous and broadleaf forest stands in the BOREAS Southern Study Areas. The pair correlation functions are derived from data on tree structural parameters collected during field campaigns conducted at these sites. The simulated canopy reflectances compare well with the PARABOLA data.

Huang, Dong↗
NASA NTRS1982

Structure of the Venus mesosphere and lower thermosphere from measurements during entry of the Pioneer Venus probes

Data on the thermal structure of the nightside middle atmosphere of Venus, from 84 to 137 km altitude, have been obtained from analysis of deceleration measurements from the third Pioneer Venus small probe, the night probe, which entered the atmosphere near the midnight meridian at 27 deg S latitude. Comparison of the midnight sounding with the morning sounding at 31 deg S latitude indicates that the temperature structure is essentially diurnally invariant up to 100 km, above which the nightside structure diverges sharply from the dayside toward lower temperatures. Very large diurnal pressure differences develop above 100 km with dayside pressure ten times that on the nightside at 126 km altitude. This has major implications for upper atmospheric dynamics. The data are compared with the measurements of Keating et al. (1980) above 140 km, with theoretical thermal structure models of Dickinson, and with data obtained by Russian Venera spacecraft below 100 km. Midnight temperatures are approximately 130 K, somewhat warmer than those reported by Keating et al.

Seiff, A.↗
NASA NTRSDate not supplied

ncompare: A Python Package for Comparing netCDF Structures

Earth science researchers and data engineers have a common problem: they often need to compare data files to see what is different between them. A lot of time is spent developing code to test differences. When it comes to comparing multidimensional data file formats like netCDFs (Network Common Data Form), this is particularly challenging and time-consuming, since there is frequently a need to evaluate the differences between dimension sizes, variable structures, and variable attributes, especially for regression testing. Since netCDFs are widely used in Earth science — with climate models, oceanographic or atmospheric reanalyses, and observational data — improved means of evaluating netCDF files can help enable a wide range of applications. We have developed a reusable open source approach through `ncompare`, which is a Python package for comparing netCDF structures [[https://github.com/nasa/ncompare]]. The `ncompare` tool compares the structure of two Network Common Data Form (NetCDF) files at the command line. It facilitates rapid comparisons by generating a formatted display of the matching and non-matching groups, variables, and associated metadata between two NetCDF datasets. The user has the option to colorize the terminal output for ease of viewing, and `ncompare` can optionally save comparison reports in text, comma-separated value (CSV), and/or Microsoft Excel formats. Despite the availability of tools (such as ncmpidiff or nccmp) that compare the values of variables, there was not previously a readily available, Python-based tool for rapid visual comparisons of group and variable structures, attributes, and chunking. `ncompare` was developed at NASA’s Atmospheric Science Data Center (ASDC) and is a collaboration with NASA Openscapes [[https://nasa-openscapes.github.io]] mentors across 11 of NASA’s data centers. Openscapes’ overarching vision is to support scientific researchers using NASA Earthdata as they migrate their workflows to the cloud. Relevant links: - https://github.com/nasa/ncompare - https://github.com/pyOpenSci/software-submission/issues/146 - https://nasa-openscapes.github.io

Daniel Kaufman↗
NASA NTRS1969

Comments on the possibility for determining detailed atmospheric structure from transhorizon radio propagation measurements

A deterministic approach is used to examine the atmospheric structure at any instant in time, with an assumption as to the degree of anisotropy. A statistical model is also used to relate the experimental data to atmospheric structure. With this model, the three dimensional spectrum of spatial wave numbers of the refractivity fluctuations are determined, along with correlations which exist within the spectrum.

Kieburtz, R. B.↗
NASA NTRS1984

A statistical evaluation and comparison of VISSR Atmospheric Sounder (VAS) data

In order to account for the temporal and spatial discrepancies between the VAS and rawinsonde soundings, the rawinsonde data were adjusted to a common hour of release where the new observation time corresponded to the satellite scan time. Both the satellite and rawinsonde observations of the basic atmospheric parameters (T Td, and Z) were objectively analyzed to a uniform grid maintaining the same mesoscale structure in each data set. The performance of each retrieval algorithm in producing accurate and representative soundings was evaluated using statistical parameters such as the mean, standard deviation, and root mean square of the difference fields for each parameter and grid level. Horizontal structure was also qualitatively evaluated by examining atmospheric features on constant pressure surfaces. An analysis of the vertical structure of the atmosphere were also performed by looking at colocated and grid mean vertical profiles of both the satellite and rawinsonde data sets. Highlights of these results are presented.

Jedlovec, G. J.↗
NASA NTRS1992

Artificial intelligence approach to planning the robotic assembly of large tetrahedral truss structures

An assembly planner for tetrahedral truss structures is presented. To overcome the difficulties due to the large number of parts, the planner exploits the simplicity and uniformity of the shapes of the parts and the regularity of their interconnection. The planning automation is based on the computational formalism known as production system. The global data base consists of a hexagonal grid representation of the truss structure. This representation captures the regularity of tetrahedral truss structures and their multiple hierarchies. It maps into quadratic grids and can be implemented in a computer by using a two-dimensional array data structure. By maintaining the multiple hierarchies explicitly in the model, the choice of a particular hierarchy is only made when needed, thus allowing a more informed decision. Furthermore, testing the preconditions of the production rules is simple because the patterned way in which the struts are interconnected is incorporated into the topology of the hexagonal grid. A directed graph representation of assembly sequences allows the use of both graph search and backtracking control strategies.

Homemdemello, Luiz S.↗
NASA NTRS1976

SMS crew station (C and D panels and forward structures). CEI part 1: Detail specification, type 1 data

Established are the requirements for performance, design, test and qualification of one type of equipment identified as SMS C&D panels and forward structures. This CEI is used to provide all hardware and wiring necessary for the C&D panels to be properly interfaced with the computer complex/signal conversion equipment (SCE), crew station, and software requirements as defined in other CEI specifications.

Source record↗
NASA NTRS1981

VLBI observations of SS 433 at 3.6 and 13 centimeters

SS 433 was detected and partially resolved at 2290 MHz on baselines with fringe spacings of 1.4, 0.1, and 0.003 arcsec. It was also detected at 8420 MHz on a baseline with a fringe spacing of 0.009 arcsec. Simple models of the source, consistent with the limited data, have elongated structures greater than 0.1 arcsec in size with position angles in 1979 May that were within about 10 deg of the position angle of the apparent bulges of the supernova remnant W50. The data also imply that the source contains a core less than 0.002 arcsec in size with a brightness temperature greater than 10 to the 9th K. The bright core and aligned structures that seem to be present in SS 433 and W50 resemble the structures seen in powerful extragalactic radio sources which are many orders of magnitude larger.

Walker, R. C.↗
NASA NTRS1993

Thermal expansion behavior of LDEF metal matrix composites

The thermal expansion behavior of Long Duration Exposure Facility (LDEF) metal matrix composite materials was studied by (1) analyzing the flight data that was recorded on orbit to determine the effects of orbital time and heating/cooling rates on the performance of the composite materials, and (2) characterizing and comparing the thermal expansion behavior of post-flight LDEF and lab-control samples. The flight data revealed that structures in space are subjected to nonuniform temperature distributions, and thermal conductivity of a material is an important factor in establishing a uniform temperature distribution and avoiding thermal distortion. The flight and laboratory data showed that both Gr/Al and Gr/Mg composites were stabilized after prolonged thermal cycling on orbit. However, Gr/Al composites showed more stable thermal expansion behavior than Gr/Mg composites and offer advantages for space structures particularly where very tight thermal stability requirements in addition to high material performance must be met.

Le, Tuyen D.↗