Search NASA⌕ Search

SEARCH · Search NASA

Results for “dependency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

The Dependence of Convective Core Overshooting on Stellar Mass: A Semi-empirical Determination Using the Diffusive Approach with Two Different Element Mixtures

Convective core overshooting has a strong influence on the evolution of stars of moderate and high mass. Studies of double-lined eclipsing binaries and stellar oscillations have renewed interest in the possible dependence of overshooting on stellar mass, which has been poorly constrained by observations so far. Here, we have used a sample of 29 well-studied double-lined eclipsing binaries in key locations of the H–R diagram to establish the explicit dependence of f{sub ov} on mass, where f{sub ov} is the free parameter in the diffusive approximation to overshooting. Measurements of the masses, radii, and temperatures of the binary components were compared against stellar evolution calculations based on the MESA code to infer semi-empirical values of f{sub ov} for each component. We find a clear mass-dependence such that f{sub ov} rises sharply from zero in the range 1.2--2.0 M{sub ⊙}, and levels off thereafter up to the 4.4 M{sub ⊙} limit of our sample. Tests with two different element mixtures indicate the trend is the same, and we find it to also be qualitatively similar to the one established in our previous study with the classical step-function implementation of overshooting characterized by the free parameter α{sub ov}. Based on these measurements, we infer an approximate relationship between the two overshooting parameters of α{sub ov}/f{sub ov}=11.36±0.22, with a possible dependence on stellar properties.

79 ASTRONOMY AND ASTROPHYSICS↗

Galactic Latitude Dependence of Near-infrared Diffuse Galactic Light: Thermal Emission or Scattered Light?

Near-infrared (IR) diffuse Galactic light (DGL) consists of scattered light and thermal emission from interstellar dust grains illuminated by the interstellar radiation field (ISRF). At 1.25 and 2.2 μm, a recent observational study shows that intensity ratios of the DGL to interstellar 100 μm dust emission steeply decrease toward high Galactic latitudes (b). In this paper, we investigate the origin(s) of the b-dependence on the basis of models of thermal emission and scattered light. Combining a thermal emission model with the regional variation of the polycyclic aromatic hydrocarbon abundance observed with Planck, we show that the contribution of the near-IR thermal emission component to the observed DGL is lower than ∼20%. We also examine the b-dependence of the scattered light, assuming a plane–parallel Galaxy with smooth distributions of the ISRF and dust density along the vertical direction, and assuming a scattering phase function according to a recently developed model of interstellar dust. We normalize the scattered light intensity to the 100 μm intensity corrected for deviation from the cosecant-b law according to the Planck observation. As the result, the present model that considers the b-dependence of dust and the ISRF properties can account for the observed b-dependence of the near-IR DGL. However, the uncertainty in the correction for the 100 μm emission is large, and other normalizing quantities may be appropriate for a more robust analysis of the DGL.

79 ASTRONOMY AND ASTROPHYSICS↗

A search for time-dependent astrophysical neutrino emission with icecube data from 2012 to 2017

High-energy neutrinos are unique messengers of the high-energy universe, tracing the processes of cosmic ray acceleration. This work presents analyses focusing on time-dependent neutrino point-source searches. A scan of the whole sky, making no prior assumption about source candidates, is performed, looking for a space and time clustering of high-energy neutrinos in data collected by the IceCube Neutrino Observatory between 2012 and 2017. No statistically significant evidence for a time-dependent neutrino signal is found with this search during this period, as all results are consistent with the background expectation. Within this study period, the blazar 3C 279, showed strong variability, inducing a very prominent gamma-ray flare observed in 2015 June. This event motivated a dedicated study of the blazar, which consists of searching for a time-dependent neutrino signal correlated with the gamma-ray emission. No evidence for a time-dependent signal is found. Hence, an upper limit on the neutrino fluence is derived, allowing us to constrain a hadronic emission model.

79 ASTRONOMY AND ASTROPHYSICS↗

The Dependence of the Fraction of Radio Luminous Quasars on Redshift and its Theoretical Implications

While radio emission in quasars can be contributed to by a variety of processes (involving star-forming regions, accretion disk coronas and winds, and jets), the powering of the radio loudest quasars must involve very strong jets, presumably launched by the Blandford–Znajek mechanism incorporating the magnetically arrested disk (MAD) scenario. Here, we focus on the latter and investigate the dependence of their fraction on redshift. We also examine the dependence of the radio-loud fraction (RLF) on BH mass ( M BH ) and Eddington ratio (λ Edd ), while excluding the redshift bias by narrowing its range. In both of these investigations, we remove the bias associated with: (1) the diversity of source selection by constructing two well-defined, homogeneous samples of quasars (first within 0.7 ≤ z ≤ 1.9, second within 0.5 ≤ z ≤ 0.7); and (2) a strong drop in the RLF of quasars at smaller BH masses by choosing those with BH masses larger than 10 8.5 M ⊙ . We confirm some of the previous results showing the increase in the fraction of radio-loud quasars with cosmic time and that this trend can be even steeper if we account for the bias introduced by the dependence of the RLF on BH mass, whereas the bias introduced by the dependence of the RLF on Eddington ratio is shown to be negligible. Assuming that quasar activities are triggered by galaxy mergers, we argue that such an increase can result from the slower drop with cosmic time of mixed mergers than of wet mergers.

79 ASTRONOMY AND ASTROPHYSICS↗

A new test statistic for climate models that includes field and spatial dependencies using Gaussian Markov random fields

Abstract. A new test statistic for climate model evaluation has been developed that potentially mitigates some of the limitations that exist for observing and representing field and space dependencies of climate phenomena. Traditionally such dependencies have been ignored when climate models have been evaluated against observational data, which makes it difficult to assess whether any given model is simulating observed climate for the right reasons. The new statistic uses Gaussian Markov random fields for estimating field and space dependencies within a first-order grid point neighborhood structure. We illustrate the ability of Gaussian Markov random fields to represent empirical estimates of field and space covariances using "witch hat" graphs. We further use the new statistic to evaluate the tropical response of a climate model (CAM3.1) to changes in two parameters important to its representation of cloud and precipitation physics. Overall, the inclusion of dependency information did not alter significantly the recognition of those regions of parameter space that best approximated observations. However, there were some qualitative differences in the shape of the response surface that suggest how such a measure could affect estimates of model uncertainty.

54 ENVIRONMENTAL SCIENCES↗

Quantile-dependent expressivity of plasma adiponectin concentrations may explain its sex-specific heritability, gene-environment interactions, and genotype-specific response to postprandial lipemia

“Quantile-dependent expressivity” occurs when the effect size of a genetic variant depends upon whether the phenotype (e.g. adiponectin) is high or low relative to its distribution. We have previously shown that the heritability ( h 2 ) of adiposity, lipoproteins, postprandial lipemia, pulmonary function, and coffee and alcohol consumption are quantile-specific. Whether adiponectin heritability is quantile specific remains to be determined. Plasma adiponectin concentrations from 4,182 offspring-parent pairs and 1,662 sibships from the Framingham Heart Study were analyzed. Quantile-specific heritability from offspring-parent (β OP , h 2 = 2 β OP /(1 + r spouse )) and full-sib regression slopes ( β FS , h 2 = {(1 + 8r spouse β FS ) 0.05 -1}/(2r spouse )) were robustly estimated by quantile regression with nonparametric significance assigned from 1,000 bootstrap samples. Quantile-specific h 2 (± SE) increased with increasing percentiles of the offspring’s age- and sex-adjusted adiponectin distribution when estimated from β OP ( P trend = 2.2 × 10 -6 ): 0.30 ± 0.03 at the 10th, 0.33 ± 0.04 at the 25th, 0.43 ± 0.04 at the 50th, 0.55 ± 0.05 at the 75th, and 0.57 ± 0.08 at the 90th percentile, and when estimated from β FS (P trend = 7.6 × 10 -7 ): 0.42 ± 0.03 at the 10th, 0.44 ± 0.04 at the 25th, 0.56 ± 0.05 at the 50th, 0.73 ± 0.08 at the 75th, and 0.79 ± 0.11 at the 90th percentile. Consistent with quantile-dependent expressivity, adiponectin’s: (1) heritability was greater in women in accordance with their higher adiponection concentrations; (2) relationships to ADIPOQ polymorphisms were modified by adiposity in accordance with its adiponectin-lowering effect; (3) response to rosiglitazone was predicted by the 45T> G ADIPOQ polymorphism; (4) difference by ADIPOQ haplotypes increased linearly with increasing postprandial adiponectin concentrations. Adiponectin heritability is quantile dependent, which may explain sex-specific heritability, gene-environment and gene-drug interactions, and postprandial response by haplotypes.

Postprandial↗

Time-dependent edge-notch sensitivity of oxide and gamma prime dispersion strengthened sheet materials at 1000 to 1800 F (538 - 982 C)

Research was carried out to determine whether an oxide dispersion hardened alloy, TD-Ni, Cr, and low volume fraction gamma prime strengthened nickel-base alloy, Modified Waspaloy, were susceptible to time-dependent edge-notch sensitivity. The results were evaluated in terms of the mechanical characteristics of the alloys and the dislocation motion mechanisms operative. As far as could be determined, the results of the investigation were consistent with the following important concepts developed for Waspaloy and Inconel 718: (1) Time-dependent edge-notch sensitivity occurs when notched specimens are loaded below the approximate 0.2 percent smooth specimen offset yield strength and when data from smooth specimens indicate that small amounts of creep consume large rupture life fractions. (2) When precipitate particles are sheared by dislocations, the deformation is localized and time-dependent notch sensitivity occurs. When dislocations by-pass precipitate particles the deformation is homogeneous. Under these conditions, no time-dependent notch sensitivity has been observed.

Wilson, D. J.↗

Temperature, illumination and fluence dependence of current and voltage in electron irradiated solar cells

Emperical equations have been derived from measurements of solar cell photovoltaic characteristics relating light generated current, IL, and open circuit voltage, VO, to cell temperature, T, intensity of illumination, W, and 1 Mev electron fluence, phi both 2 ohm-cm and 10 ohm-cm cells were tested. The temperature dependency of IL is similar for both resistivities at 140mw/sq cm; at high temperature the coefficient varies with fluence as phi 0.18, while at low temperatures the coefficient is relatively independent of fluence. Fluence dependent degration causes a decrease in IL at a rate proportional to phi 0.153 for both resistivities. At all intensities other than 560 mw/sq cm, a linear dependence of IL on illumination was found. The temperature coefficient of voltage was, to a good approximation, independent of both temperature and illumination for both resistivities. Illumination dependence of VOC was logarithmic, while the decrease with fluence of VOC varied as phi 0.25 for both resistivities.

Obenschain, A. F.↗

Intensity and pressure dependence of resonance fluorescence of OH induced by a tunable UV laser

The intensity and pressure dependence of the fluorescence spectrum of OH in the presence of N2 and H2O molecules was studied. Saturation of the absorption transition was observed at low pressures, and the corresponding fluorescence signal was found to vary as the square root of the exciting intensity. This observed dependence agreed with the predicted dependence which took into account the presence of laser modes in the spectrum of the exciting radiation. With full laser power incident, a saturation parameter as high as 3 x 10 to the 5th was observed. The fluorescence spectrum was found to peak at 3145 and at 3090 A, with the relative peak intensities dependent upon gas pressures and upon the particular rotational electronic transition used for excitation. It is concluded that vibrational relaxation of the electronically excited OH due to water vapor in the system plays a dominant role in determining the observed fluorescence spectrum.

Killinger, D. K.↗

Amplification of Reynolds number dependent processes by wave distortion

The amplification of a Reynolds number dependent process by wave distortion and the possibility of applying the results to other similar Reynolds number dependent processes were investigated. The process investigated was that associated with the operation of a constant-temperature hot-wire anemometer. The application of vaporization limited combustion, the type of combustion typically associated with liquid propellant rocket engines, was studied. A series of experiments were carried out to determine the effect of wave distortion on a Reynolds number dependent process and to establish the analogy between the anemometer process and the combustion process. Parametric trends, behavior common to different chamber geometries, and stability boundaries were identified. The results indicate a high degree of similarity between the two processes and the possibility of using the anemometer system to investigate combustion instability. The nonlinear aspects of a Reynolds number dependent process appear to be the dominant mechanisms controlling instability.

Ventrice, M.↗

Determination of efficiencies, loss mechanisms, and performance degradation factors in chopper controlled dc vehical motors. Section 2: The time dependent finite element modeling of the electromagnetic field in electrical machines: Methods and applications

The time dependent solution of the magnetic field is introduced as a method for accounting for the variation, in time, of the machine parameters in predicting and analyzing the performance of the electrical machines. The method of time dependent finite element was used in combination with an also time dependent construction of a grid for the air gap region. The Maxwell stress tensor was used to calculate the airgap torque from the magnetic vector potential distribution. Incremental inductances were defined and calculated as functions of time, depending on eddy currents and saturation. The currents in all the machine circuits were calculated in the time domain based on these inductances, which were continuously updated. The method was applied to a chopper controlled DC series motor used for electric vehicle drive, and to a salient pole sychronous motor with damper bars. Simulation results were compared to experimentally obtained ones.

Hamilton, H. B.↗

Latitude-dependent sensitivity to stationary perturbations in simple climate models

The steady-state zonally averaged climate is perturbed by adding a latitude-dependent heat source to an energy balance equation of the simplified Budyko-Sellers type. The latitude of the ice edge, which is attached to an isotherm, becomes dependent on the strength of the perturbation. This dependence is given in terms of the well-known iceline-solar constant relation, and the latitude dependence of the perturbed temperature field is then uniquely determined. The exact analytical solution is linearized and expressed in terms of a superposition of line sources at various latitudes. The main features are: (1) The total temperature response is a sum of the direct effect of the perturbation and an indirect ice-albedo effect proportional to the solar ice-edge sensitivity; and (2) the indirect feedback effect produces an enhanced response in polar latitudes.

Salmun, H.↗

A Unified Constitutive Relationship for the Time-dependent Behavior of Fast Breeder Alloys

Constitutive equations based on classical concepts of creep and plasticity generally rest on the assumption that the inelastic strain can be decomposed into two distinct and additive contributions, one time dependent (creep) and the other time dependent (plastic). It is suggested that an approach is to adopt a unified representation in which creep and plasticity are characterized as occurring simultaneously and interactively and time is an essential ingredient throughout. Examples of the inherent time dependency exhibited by some fast breeder alloys at elevated temperature are rate dependency under monotonic and cyclic straining, thermal recovery and strong creep-elasticity interaction. The stron influence of the recent history of plastic straining on stress relaxation is shown.

Robinson, D. N.↗

Temperature dependence of elastic and strength properties of T300/5208 graphite-epoxy

Experimental results are presented for the elastic and strength properties of T300/5208 graphite-epoxy at room temperature, 116K (-250 F), and 394K (+250 F). Results are presented for unidirectional 0, 90, and 45 degree laminates, and + or - 30, + or - 45, and + or - 60 degree angle-ply laminates. The stress-strain behavior of the 0 and 90 degree laminates is essentially linear for all three temperatures and that the stress-strain behavior of all other laminates is linear at 116K. A second-order curve provides the best fit for the temperature is linear at 116K. A second-order curve provides the best fit for the temperature dependence of the elastic modulus of all laminates and for the principal shear modulus. Poisson's ratio appears to vary linearly with temperature. all moduli decrease with increasing temperature except for E (sub 1) which exhibits a small increase. The strength temperature dependence is also quadratic for all laminates except the 0 degree - laminate which exhibits linear temperature dependence. In many cases the temperature dependence of properties is nearly linear.

Milkovich, S. M.↗

Viscoplastic constitutive relationships with dependence on thermomechanical history

Experimental evidence of thermomechanical history dependence in the cyclic hardening behavior of some common high-temperature structural alloys is presented with special emphasis on dynamic metallurgical changes. The inadequacy of formulating nonisothermal constitutive equations solely on the basis of isothermal testing is discussed. A representation of thermoviscoplasticity is proposed that qualitatively accounts for the observed hereditary behavior. This is achieved by formulating the scalar evolutionary equation in an established viscoplasticity theory to reflect thermomechanical path dependence. To assess the importance of accounting for thermomechanical history dependence in practical structural analyses, two qualitative models are specified: (1) formulated as if based entirely on isothermal information; (2) to reflect thermomechanical path dependence using the proposed thermoviscoplastic representation. Predictions of the two models are compared and the impact the calculated differences in deformation behavior may have on subsequent lifetime predictions is discussed.

Robinson, D. N.↗

Time-dependent model of the Martian atmosphere for use in orbit lifetime and sustenance studies

A time-dependent model of the Martian atmosphere suitable for calculation of long-term aerodynamic effects on low altitude satellites is presented. The atmospheric model is both position dependent, through latitude and longitude effects, and time dependent. The time dependency includes diurnal and seasonal effects, effects of annual motion, long and short term solar activity effects, and periodic dust storm effects. Nine constituent gases are included in the model. Uncertainties in exospheric temperature, turbidity, and turbopause altitude are used to produce bounds on the expected density. A computer model - a Fortran subroutine which, when given the Julian date, Cartesian position of the sun and the spacecraft in aerocentric coordinates, returns the local values of mass density, temperature, scale height, and upper and lower bounds on the mass density is presented.

Culp, R. D.↗

The role of a pressure-dependent rheology in the dynamics of mantle circulation

A thermomechanical model for upper mantle convection was constructed such that the thickness and the structure of the lithosphere are determined self consistently by the heat transported by convection. In this study of the interaction between the lithosphere and upper mantle, strongly temperature and pressure dependent rheologies for both Newtonian and non-Newtonian creep mechanisms are employed. For a strictly temperature dependent rheology an insignificant amount of heat, less than 12.5 mW/sq m, can be transported convectively for an interior viscosity, 0(10 sup 21 Pas), compatible with post glacial rebound. On the other hand, for similar values of the interior viscosity, steady heat fluxes between 20 and 40 mW/sq m are produced by introducing pressure dependence into the rheology. For the temperature and pressure dependent flow law the horizontally averaged interior temperature displays very little variation with the amount of heat evacuated, once all of the rheological parameters are fixed. This finding may have important ramifications for parameterized convection.

Yuen, D. A.↗

The wavelength dependence of phase coefficients

It is pointed out that spectral reflectance curves depend largely upon the optical constants of the surface materials. In the present study, the results of laboratory measurements are employed to investigate the wavelength dependence of disk-integrated phase coefficients of some materials, taking into account a basalt, the ordinary chondrite Bruderheim, the carbonaceous chondrite Allende, and sulfur. These materials have been selected as appropriate analogs to the surfaces of the moon, S- and C-class asteroids, and the Jovian satellite Io, respectively. It is shown that the observed wavelength dependence of phase coefficients can be predicted (at least qualitatively) once the spectrum of an object is known. Attention is given to phase variation of disk-integrated spectral reflectance curves, the wavelength dependence of phase coefficients, a comparison with observations, and the effects of surface roughness on phase coefficients.

Gradie, J.↗