Search NASA⌕ Search

SEARCH · Search NASA

Results for “finite difference methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Laser beam induced nanoscale spot through nonlinear “thick” samples: A multi-layer thin lens self-focusing model

Self-focusing is a well-researched phenomenon. Nanoscale spots can be achieved through self-focusing, which is an alternative method for achieving high-density data storage, high-resolution light imaging, and maskless nanolithography. Several research groups have observed that self-focusing spots can be reduced to nanoscale levels via incident laser power manipulation. Self-focusing spots can be analyzed by solving the nonlinear Schrödinger equation and the finite difference time domain method. However, both procedures are complex and time-consuming. In the present work, a multi-layer thin-lens self-focusing model that considers diffraction effects and changes of refractive index along the radial and film thickness directions is proposed to analyze the self-focusing behavior and traveling process of light beams intuitively. The self-focusing behaviors of As{sub 2}S{sub 3} are simulated, and results show that a nanoscale self-focusing spot with a radius of about 0.12 μm can be formed at the bottom of nonlinear sample when the incident laser power exceeds 4.25 mW. Our findings are basically consistent with experimental reports and provide a good method for analyzing and understanding the self-focusing process. An appropriate application schematic design is also provided.

36 MATERIALS SCIENCE↗

A numerical study of the unsteady leading edge separation bubble on an oscillating airfoil

A preliminary study of the unsteady viscous flow in the region of an airfoil leading edge was performed, in which the interaction between the viscous and inviscid flow fields is neglected. The solution method uses the finite difference form of the governing equations throughout the separated flow field and incorporates a transition model based on the integral turbulence kinetic energy equation. The validity of the numerical procedure is verified by making comparisons with analytical solutions to several test problems, including unsteady flow over a plate oscillating in its own plane. The method was then applied to the problem of unsteady viscous flow over a NACA 0012 airfoil oscillating sinusoidally in pitch. The flow field characteristics were in qualitative agreement with experimental results. The bubble moved forward on the airfoil and decreased in size as incidence was increased. Viscous flow in the leading edge region was found to be quasi-steady, while bubble height varied inversely with Reynolds number.

Kreskovsky, J. P.↗

Smoothed Particle Hydrodynamics Continuous Boundary Force method for Navier-Stokes equations subject to Robin boundary condition

Robin boundary condition for the Navier-Stokes equations is used to model slip conditions at the fluid-solid boundaries. A novel Continuous Boundary Force (CBF) method is proposed for solving the Navier-Stokes equations subject to Robin boundary condition. In the CBF method, the Robin boundary condition at boundary is replaced by the homogeneous Neumann boundary condition at the boundary and a volumetric force term added to the momentum conservation equation. Smoothed Particle Hydrodynamics (SPH) method is used to solve the resulting Navier-Stokes equations. We present solutions for two-dimensional and three-dimensional flows in domains bounded by flat and curved boundaries subject to various forms of the Robin boundary condition. The numerical accuracy and convergence are examined through comparison of the SPH-CBF results with the solutions of finite difference or finite element method. Taken the no-slip boundary condition as a special case of slip boundary condition, we demonstrate that the SPH-CBF method describes accurately both no-slip and slip conditions.

Pan, Wenxiao↗

A design procedure for fan-out improvement in all-optical photonic crystal logic design

In this paper, a general method is proposed to improve the fan-out parameter for all-optical logic gates and functions. Two different types of devices are designed to increase the fan-out of a logic operation and its inverted logic. Nonlinear cavities are used to design driving units. Silicon nanocrystal is used as the nonlinear material to create the required frequency shift for different values of input power. Plane wave expansion and finite difference time domain methods are used to simulate and analyze the proposed structures. The propagation delay of the proposed structure is less than 1.5 ps and the maximum required power for fan-out of three is 15 W.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Application of the boundary element method to transient heat conduction

An advanced boundary element method (BEM) is presented for the transient heat conduction analysis of engineering components. The numerical implementation necessarily includes higher-order conforming elements, self-adaptive integration and a multiregion capability. Planar, three-dimensional and axisymmetric analyses are all addressed with a consistent time-domain convolution approach, which completely eliminates the need for volume discretization for most practical analyses. The resulting general purpose algorithm establishes BEM as an attractive alternative to the more familiar finite difference and finite element methods for this class of problems. Several detailed numerical examples are included to emphasize the accuracy, stability and generality of the present BEM. Furthermore, a new efficient treatment is introduced for bodies with embedded holes. This development provides a powerful analytical tool for transient solutions of components, such as casting moulds and turbine blades, which are cumbersome to model when employing the conventional domain-based methods.

Dargush, G. F.↗

Numerical solution of the vertical structure equation in the normal mode method

In the present model of multilayered stability stratification, aimed at obtaining the analytic eigensolutions of the vertical structure equation, each layer is characterized by its own static stability value. By requiring continuity of pressure and vertical velocity across each interface level, and by imposing suitable upper and lower boundary conditions, matching eigensolutions are obtained in terms of the Bessel functions. Attention is given to an explicit example of a double-layered stratified atmosphere which demonstrates the mathematical manipulations involved; the resultant vertical structure functions are used to check the accuracy of the numerical solutions by the finite difference and finite element methods.

Sasaki, Y. K.↗

Augmented Lagrangian formulation of orbital-free density functional theory

We present an Augmented Lagrangian formulation and its real-space implementation for non-periodic Orbital-Free Density Functional Theory (OF-DFT) calculations. In particular, we rewrite the constrained minimization problem of OF-DFT as a sequence of minimization problems without any constraint, thereby making it amenable to powerful unconstrained optimization algorithms. Further, we develop a parallel implementation of this approach for the Thomas–Fermi–von Weizsacker (TFW) kinetic energy functional in the framework of higher-order finite-differences and the conjugate gradient method. With this implementation, we establish that the Augmented Lagrangian approach is highly competitive compared to the penalty and Lagrange multiplier methods. Additionally, we show that higher-order finite-differences represent a computationally efficient discretization for performing OF-DFT simulations. Overall, we demonstrate that the proposed formulation and implementation are both efficient and robust by studying selected examples, including systems consisting of thousands of atoms. We validate the accuracy of the computed energies and forces by comparing them with those obtained by existing plane-wave methods.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Viscous-inviscid interaction for transonic wing-body configurations including wake effects

An existing three-dimensional compressible integral boundary-layer method was modified to account for mean dilatation effects, to model transition properly, and to provide better numerical stability near computational boundaries. Results of this method were compared against those from a three-dimensional finite-difference boundary-layer method on a difficult test case. An interaction procedure was developed to couple this integral method with a number of wing-alone and wing-body transonic potential codes to account for viscous effects. A strip wake model, including thickness and curvature effects, was developed and incorporated into this interaction procedure. Results from this procedure were compared against experimental data and results from previous procedures, on test cases where viscous effects were large.

Streett, C. L.↗

Nanoscale plasmonic detector of wave intensity difference and uni-directional waveguide

In this paper, a new nanoscale plasmonic differential detector of wave intensities is proposed. This structure can be useful for calibration applications and for finding out if a wave intensity is high enough to pass a threshold level or not. Next, a nanoscale plasmonic uni-directional waveguide is presented. The distinction of this waveguide with similar cases is that the one-way wave-guiding is provided by adding a properly located controlling source, without employing any non-reciprocal material. This feature can be used in many applications that only uni-directional wave propagation is desirable. Both structures have been designed in metal–insulator–metal structure including cavity resonators. The operations are based on the coupling of the wave from input waveguides to the cavity resonators and decoupling to output waveguides in the cavity resonance wavelengths. The simulation results of performance of the structures, as elements applicable to photonic integrated circuits, have been obtained using the numerical method of the finite difference time domain.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Large scale Brownian dynamics of confined suspensions of rigid particles

We introduce methods for large-scale Brownian Dynamics (BD) simulation of many rigid particles of arbitrary shape suspended in a fluctuating fluid. Our method adds Brownian motion to the rigid multiblob method [F. Balboa Usabiaga et al., Commun. Appl. Math. Comput. Sci. 11(2), 217–296 (2016)] at a cost comparable to the cost of deterministic simulations. We demonstrate that we can efficiently generate deterministic and random displacements for many particles using preconditioned Krylov iterative methods, if kernel methods to efficiently compute the action of the Rotne-Prager-Yamakawa (RPY) mobility matrix and its “square” root are available for the given boundary conditions. These kernel operations can be computed with near linear scaling for periodic domains using the positively split Ewald method. Here we study particles partially confined by gravity above a no-slip bottom wall using a graphical processing unit implementation of the mobility matrix-vector product, combined with a preconditioned Lanczos iteration for generating Brownian displacements. We address a major challenge in large-scale BD simulations, capturing the stochastic drift term that arises because of the configuration-dependent mobility. Unlike the widely used Fixman midpoint scheme, our methods utilize random finite differences and do not require the solution of resistance problems or the computation of the action of the inverse square root of the RPY mobility matrix. We construct two temporal schemes which are viable for large-scale simulations, an Euler-Maruyama traction scheme and a trapezoidal slip scheme, which minimize the number of mobility problems to be solved per time step while capturing the required stochastic drift terms. We validate and compare these schemes numerically by modeling suspensions of boomerang-shaped particles sedimented near a bottom wall. Using the trapezoidal scheme, we investigate the steady-state active motion in dense suspensions of confined microrollers, whose height above the wall is set by a combination of thermal noise and active flows. We find the existence of two populations of active particles, slower ones closer to the bottom and faster ones above them, and demonstrate that our method provides quantitative accuracy even with relatively coarse resolutions of the particle geometry.

97 MATHEMATICS AND COMPUTING↗

Non-destructive quantification of alignment of nanorods embedded in uniaxially stretched polymer films

Among several methods developed for uniaxial alignment of metallic nanorods for optical applications, alignment by film stretching consists in embedding the rods in a transparent thin film of thermoplastic polymer, followed by simultaneous heating and uniaxial stretching of the composite film. As to the quantification of the resulting alignment, it has been limited to statistical calculations based on microscopic examination, which is incomplete, subject to errors due to geometric distortions of the scanning electron microscope images and destructive, since it involves cutting of samples. In contrast, we present in this paper a non-destructive quantification of the average orientation of the rods, based on a probabilistic approach combined with numerical simulations of absorbance spectra and spectrometric characterization of the composite film. Assuming electromagnetically non-interacting rods, we consider the longitudinal absorbance peak of their ensemble to consist of the superposition of their individual spectra that we obtain by numerical simulation using the size and shape adapted dielectric function of the metal and the finite difference time domain method. The accuracy of the solution depends on the number of discretization intervals, the accuracy of the numerical simulations, and the accurate knowledge of the polydispersity of the rods. For the sake of concreteness, we used nanorods to describe the quantification steps but the method is equally valid for any dichroic particles.

36 MATERIALS SCIENCE↗

Enriched immersed finite element and isogeometric analysis: algorithms and data structures

Immersed finite element methods provide a convenient analysis framework for problems involving geometrically complex domains, such as those found in topology optimization and microstructures for engineered materials. However, their implementation remains a major challenge due to, among other things, the need to apply nontrivial stabilization schemes and generate custom quadrature rules. This article introduces the robust and computationally efficient algorithms and data structures comprising an immersed finite element preprocessing framework. The input to the preprocessor consists of a background mesh and one or more geometries defined on its domain. The output is structured into groups of elements with custom quadrature rules formatted such that common finite element assembly routines may be used without or with only minimal modifications. The key to the preprocessing framework is the construction of material topology information, concurrently with the generation of a quadrature rule, which is then used to perform enrichment and generate stabilization rules. While the algorithmic framework applies to a wide range of immersed finite element methods using different types of meshes, integration, and stabilization schemes, the preprocessor is presented within the context of the extended isogeometric analysis. This method utilizes a structured B-spline mesh, a generalized Heaviside enrichment strategy considering the material layout within individual basis functions’ supports, and face-oriented ghost stabilization. Using a set of examples, the effectiveness of the enrichment and stabilization strategies is demonstrated alongside the preprocessor’s robustness in geometric edge cases. Additionally, the performance and parallel scalability of the implementation are evaluated.

Computer implementation↗

A progress update on selected AREVA NP advanced BWR methodologies

This article presents an overview of select advances in AREVA NP methods concerning 3 topics: Analytical fuel rod model, Transient and accident simulation, and ATWSi post dryout treatment. Concerning the first topic, the analytical fuel rod model relies heavily on first-principles closed-form solutions instead of ever finer nodalization and higher dimensions of standard numerical methods such as finite differences or finite elements. This analytical fuel rod model takes full account of the complications that made numerical analysis necessary, e.g. variation of pellet thermal conductivity with temperature and burnup, and the radial dependence of fission power deposition in pellets. The model also calculates thermo-mechanical parameters such as clad stress and strain, fission gas release, pellet sintering and swelling, and pellet-clad gap size and thermal resistance. The model is suited for innovative fuel designs such as doped pellets. Concerning the second topic, the BWR evaluation model, AURORA-B, is an advanced transient and accident simulator including SRELAP5, a two fluid thermal hydraulic code comprehensively reviewed by international safety authorities for BWR and PWR applications; RODEX4, a best estimate fuel performance code used to evaluate the local thermal-mechanical behavior of fuel rods during postulated transients and accidents; and MB2-K, a neutron kinetics extension of the steady state core simulator MICROBURN-B2. The analytical domains will include transients as well as control rod drop and loss of coolant accidents. Extension of RODEX4 have been made to accommodate analysis of chromium-doped fuel. Concerning the third issue,The new AREVA post-dryout models can accurately predict dryout/re-wet followed by an ultimate failure to re-wet under oscillatory ATWSi (Anticipated Transient Without SCRAM with core instability) conditions. These models, while not a boiling curve based method, can qualitatively reproduce the characteristics of the boiling curve.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Effect of Yagi–Uda nano-antenna element shape on the directivity and radiation efficiency

In this paper, different optimal designs of Yagi–Uda nano-antennas (NAs) are introduced and analyzed based on different element shapes to maximize the directivity and radiation efficiency. The studied element shapes include triangular, hexagonal, cube, square, rotated square, rectangular, ellipsoid, and elliptical cylinder shapes. The NAs parameters for each design are optimized using particle swarm optimization algorithm to achieve high directivity at a wavelength of 500 nm for wireless point-to-point applications. The designs are numerically analysed using 3-D finite difference time domain method (3-D FDTD) via Lumerical software package. To illustrate the performance of the proposed antennas, different radiation parameters such as radiation pattern, directivity, and radiation efficiency have been studied. Moreover, a tolerance of ± 5% is calculated to consider the imperfections that may appear in the fabrication process at a nanoscale. The optimized rectangular prism NA achieves the highest directivity of 24.21 with an efficiency of 50.74%. However, the optimized triangular prism NA has the highest efficiency of 73% with a directivity of 20.89. This enhancement is mainly attributed to the efficient coupling between array elements along with low side lobe level. However, a trade-off between directivity and radiation efficiency is obtained by the hexagonal prism NA with directivity of 21.9 and radiation efficiency of 69.1%.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Application of nonlinear photonic crystal ring resonators in realizing all optical OR/NOT/AND gates

Arithmetic logic unit (ALU) is the core of any digital processing systems. For creating an all optical ALU one needs basic logic gates such as optical NOT, OR and AND gates along with an optical full adder and optical multiplexer. In this paper we aim to design and propose these three basic logic gates using nonlinear photonic crystal ring resonators. The simulations will be done using plane wave expansion and finite difference time domain methods. The proposed structures work based on controlling the optical behavior of the nonlinear resonators using optical power. The simulation results show that the switching threshold for this resonant ring is about 15 mW/μm{sup 2}. Reduced delay times and switching optical power are the main advantages of the proposed structures. Also by adding two resonant rings in input ports we reduced the cross reflection between the input ports.

42 ENGINEERING↗

Realization of all-optical plasmonic MIM split square ring resonator switch

In this work, a configuration of nano plasmonic switch is proposed and investigated. The structure is comprised of the combination of split square ring and straight waveguides. Simulations are done based on Finite-Difference-Time Domain method. The structure is based on metal-insulator-metal configuration. Split square ring and straight waveguides are consisted of air, which are situated in a silver background. The proposed switch can confine light to sub-wavelength dimensions (on the order of nano meter); therefore it can be used in highly integrated optical circuits. The split square ring structure can operate both directly or reversely based on the split position. The transmitted powers in different cases of split square switch are acceptable and higher than 0.6. Therefore, the proposed switch is an appropriate candidate for highly integrated optical communication systems.

42 ENGINEERING↗

A novel proposal for all optical half-subtractor based on photonic crystals

Optical logic devices are the inevitable need for the future all optical computing and data processing. In this paper we are going to design and propose an all optical half subtractor using photonic crystal structure. The proposed structure will be realized using both threshold switching and beam interference. Finite difference time domain method used for analyzing the proposed structure. The simulation results show that the contrast ratio for D and B ports are 8 dB and 12 dB respectively. Also the maximum the maximum rise and fall times are 1 ps and 0.6 ps respectively.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Fano resonances based on plasmonic square resonator with high figure of merits and its application in glucose concentrations sensing

A compact plasmonic structure is proposed employing symmetrical metal–insulator-metal (MIM) waveguides coupled to the square resonator for nano-sensing applications, especially for water glucose sensing. Finite difference time domain method is chosen to derivate the output characteristics and magnetic-field distributions. Outcomes illustrate the Fano resonance in the output characteristics can be simply managed by varying the inner and outer lengths and the refractive index of the square cavity. Also, between Fano resonance wavelength and resonator length, a linear behavior exists. These features suggest that physical parameters provide flexibility to propose the structure. Our plasmonic device produces a sensitivity and figure of merit of about 6400 nm/RIU and 1 × 10{sup 4}, respectively. By utilizing the mathematical model for water refractive index, we aim to develop a sensor structure to detect the glucose concentration in water. This designed sensor may discover significant applications in future nanosensing domain.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗