Search NASA⌕ Search

SEARCH · Search NASA

Results for “identification problem”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Research on the Problem of High-Precision Deployment for Large-Aperture Space-Based Science Instruments

The present paper summarizes results from an ongoing research program conducted jointly by the University of Colorado and NASA Langley Research Center since 1994. This program has resulted in general guidelines for the design of high-precision deployment mechanisms, and tests of prototype deployable structures incorporating these mechanisms have shown microdynamically stable behavior (i.e., dimensional stability to parts per million). These advancements have resulted from the identification of numerous heretofore unknown microdynamic and micromechanical response phenomena, and the development of new test techniques and instrumentation systems to interrogate these phenomena. In addition, recent tests have begun to interrogate nanomechanical response of materials and joints and have been used to develop an understanding of nonlinear nanodynamic behavior in microdynamically stable structures. The ultimate goal of these efforts is to enable nano-precision active control of micro-precision deployable structures (i.e., active control to a resolution of parts per billion).

Lake, Mark S.↗

Constrained or unconstrained? Neural-network-based equation discovery from data

Throughout many fields, practitioners often rely on differential equations to model systems. Yet, for many applications, the theoretical derivation of such equations and/or the accurate resolution of their solutions may be intractable. Instead, recently developed methods, including those based on parameter estimation, operator subset selection, and neural networks, allow for the data-driven discovery of both ordinary and partial differential equations (PDEs), on a spectrum of interpretability. The success of these strategies is often contingent upon the correct identification of representative equations from noisy observations of state variables and, as importantly and intertwined with that, the mathematical strategies utilized to enforce those equations. Specifically, the latter has been commonly addressed via unconstrained optimization strategies. Representing the PDE as a neural network, we propose to discover the PDE (or the associated operator) by solving a constrained optimization problem and using an intermediate state representation similar to a physics-informed neural network (PINN). The objective function of this constrained optimization problem promotes matching the data, while the constraints require that the discovered PDE is satisfied at a number of spatial collocation points. We present a penalty method and a widely used trust-region barrier method to solve this constrained optimization problem, and we compare these methods on numerical examples. Our results on several example problems demonstrate that the latter constrained method outperforms the penalty method, particularly for higher noise levels or fewer collocation points. This work motivates further exploration into using sophisticated constrained optimization methods in scientific machine learning, as opposed to their commonly used, penalty-method or unconstrained counterparts. For both of these methods, we solve these discovered neural network PDEs with classical methods, such as finite difference methods, as opposed to PINNs-type methods relying on automatic differentiation. Here, we briefly highlight how simultaneously fitting the data while discovering the PDE improves the robustness to noise and other small, yet crucial, implementation details.

Data-driven discovery↗

IDENTIFYING ELUSIVE ELECTROMAGNETIC COUNTERPARTS TO GRAVITATIONAL WAVE MERGERS: AN END-TO-END SIMULATION

Combined gravitational wave (GW) and electromagnetic (EM) observations of compact binary mergers should enable detailed studies of astrophysical processes in the strong-field gravity regime. This decade, ground-based GW interferometers promise to routinely detect compact binary mergers. Unfortunately, networks of GW interferometers have poor angular resolution on the sky and their EM signatures are predicted to be faint. Therefore, a challenging goal will be to unambiguously pinpoint the EM counterparts of GW mergers. We perform the first comprehensive end-to-end simulation that focuses on: (1) GW sky localization, distance measures, and volume errors with two compact binary populations and four different GW networks; (2) subsequent EM detectability by a slew of multiwavelength telescopes; and (3) final identification of the merger counterpart amidst a sea of possible astrophysical false positives. First, we find that double neutron star binary mergers can be detected out to a maximum distance of 400 Mpc (or 750 Mpc) by three (or five) detector GW networks, respectively. Neutron-star-black-hole binary mergers can be detected a factor of 1.5 further out; their median to maximum sky localizations are 50-170 deg{sup 2} (or 6-65 deg{sup 2}) for a three (or five) detector GW network. Second, by optimizing depth, cadence, and sky area, we quantify relative fractions of optical counterparts that are detectable by a suite of different aperture-size telescopes across the globe. Third, we present five case studies to illustrate the diversity of scenarios in secure identification of the EM counterpart. We discuss the case of a typical binary, neither beamed nor nearby, and the challenges associated with identifying an EM counterpart at both low and high Galactic latitudes. For the first time, we demonstrate how construction of low-latency GW volumes in conjunction with local universe galaxy catalogs can help solve the problem of false positives. We conclude with strategies that would best prepare us for successfully identifying the elusive EM counterpart of a GW merger.

79 ASTRONOMY AND ASTROPHYSICS↗

Experiment K-6-18. Study of muscarinic and gaba (benzodiazepine) receptors in the sensory-motor cortex, hippcampus and spinal code

Frontal lobe samples of rat brains flown aboard Cosmos 1887 were processed for the study of muscarinic (cholinergic) and GABA (benzodiazepine) receptors and for immunocytochemical localization of the neurotransmitter gamma-aminobutyric acid (GABA) and glial fibrillary acidic protein (GFAP). Although radioactive labeling of both muscarinic cholinergic and GABA (benzodiazepine) receptors proved to be successful with the techniques employed, distinct receptor localization of individual laminae of the frontal neocortex was not possible since the sampling of the area was different in the various groups of animals. In spite of efforts made for proper orientation and regional identification of laminae, it was found that a densitometric (quantitation of autoradiograms) analysis of the tissue did not contribute to the final interpretation of the effects of weightlessness on these receptors. As to the immunocytochemical studies the use of both markers, GFAP and GABA antiserum, confirmed the suitability of the techniques for use in frozen material. However, similar problems to those encountered in the receptor studies prevented an adequate interpretation of the effects of micro-G exposure on the localization and distribution of GABA and GFAP. This study did, however, confirm the feasibility of investigating neurotransmitters and their receptors in future space flight experiments.

Daunton, N.↗

Artificial Intelligence Application to D and D - 20492

As aging facilities across the DOE complex await decommissioning, there is an ongoing need to understand any changes in the structural conditions. Many of these facilities were built over 50 years ago and, in some cases, these facilities have gone beyond the expected operational lifetime. Many facilities have been placed in a state of 'cold and dark,' sitting unused and awaiting decommissioning. Especially challenging are the aging facilities that provide unique operational/production capabilities to support critical DOE missions and cannot be shut down. In any of these scenarios, the structural integrity of these facilities may become compromised as time passes. It is critical that adequate inspections be performed on a continual basis and that the data collected undergoes sufficient analysis to support timely identification of any new or worsening structural issues as well as prompt needed maintenance and repairs to maintain the facilities in a safe condition. In recent days, Artificial Intelligence (AI) [1] and its application to various domains are growing at fast speed. FIU is performing research in this area and exploring the associated technologies to solve nuclear decommissioning problems. Artificial intelligence refers to the capability of a program to autonomously act, react and adapt to the working environment. AI enables the machine to behave like humans and perform the cognitive functions such as 'learning' and 'problem solving'. AI systems gradually moving from traditional approaches (algorithms and expert systems) towards more efficient and advanced technologies (machine learning [1] and deep learning [2] [3]). AI is the study of algorithms and statistical models that is being used by computers to perform specific tasks without using explicit instructions. FIU is working to develop a pilot-scale infrastructure to implement structural health monitoring using AI technologies with focus on machine learning, deep learning. This research is focused on Computer Vision/Image Classification area of AI applications. This can also be expanded to other areas of AI related to Object Recognition and Character Recognition in images. In addition to utilizing existing data sets, FIU will collect and investigate image and video data using FIU test-bed mockups to monitor structural health of the facility. Resulting data will be processed and analyzed using machine learning/deep learning technologies. The proposed pilot system is intended to serve as a starting point to engage the DOE field sites on related data sets and their decision making needs. It is anticipated that proposed machine learning/deep learning technologies can be effectively employed using anomaly detection to solve EM challenges in surveillance and maintenance of the D and D facilities. FIU will work with research stakeholders to identify applications at various sites and other DOE facilities. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A noise source identification technique using an inverse Helmholtz integral equation method

A technique is developed which utilizes numerical models and field pressure information to characterize acoustic fields and identify acoustic sources. The numerical models are based on boundary element numerical procedures. Either pressure, velocity, or passive boundary conditions, in the form of impedance boundary conditions, may be imposed on the numerical model. Alternatively, if no boundary information is known, a boundary condition can be left unspecified. Field pressure data may be specified to overdetermine the numerical problem. The problem is solved numerically for the complete sound field from which the acoustic sources may be determined. The model can then be used to idenfify acoustic intensity paths in the field. The solution can be modified and the model used to evaluate design alternatives. In this investigation the method is tested analytically and verified. In addition, the sensitivity of the method to random and bias error in the input data is demonstrated.

Gardner, B. K.↗

Inverse modeling and uncertainty analysis of potential groundwater recharge to the confined semi-fossil Ohangwena II Aquifer, Namibia

The identification of potential recharge areas and estimation of recharge rates to the confined semi-fossil Ohangwena II Aquifer (KOH-2) is crucial for its future sustainable use. The KOH-2 is located within the endorheic transboundary Cuvelai-Etosha-Basin (CEB), shared by Angola and Namibia. The main objective was the development of a strategy to tackle the problem of data scarcity, which is a well-known problem in semi-arid regions. In a first step, conceptual geological cross sections were created to illustrate the possible geological setting of the system. Furthermore, groundwater travel times were estimated by simple hydraulic calculations. A two-dimensional numerical groundwater model was set up to analyze flow patterns and potential recharge zones. The model was optimized against local observations of hydraulic heads and groundwater age. The sensitivity of the model against different boundary conditions and internal structures was tested. Parameter uncertainty and recharge rates were estimated. Results indicate that groundwater recharge to the KOH-2 mainly occurs from the Angolan Highlands in the northeastern part of the CEB. The sensitivity of the groundwater model to different internal structures is relatively small in comparison to changing boundary conditions in the form of influent or effluent streams. Uncertainty analysis underlined previous results, indicating groundwater recharge originating from the Angolan Highlands. The estimated recharge rates are less than 1% of mean yearly precipitation, which are reasonable for semi-arid regions.

58 GEOSCIENCES↗

Excitation of XPS spectra from nanoscaled particles by local generation of x-rays

In preliminary work, the authors have shown that use of an aluminum substrate to support a distribution of copper particles enables their characteristic photoelectrons to be observed within the Auger electron spectrum generated by an incident electron beam. This observation raises the possibility of the use of chemical shifts and the corresponding Auger parameter to identify the chemical states present on the surface of individual submicrometer particles within a mixture. In this context, the technique has an advantage in that, unlike conventional Auger electron spectroscopy, the electron beam does not dwell on the particle but on the substrate adjacent to it. Given the importance, for both medical and toxicological reasons, of the surface composition of such particles, the authors have continued to explore the potential of this development. In this contribution, the authors show that proximal excitation of x-rays is equally successful with magnesium substrates. In some regions of the x-ray photoelectron spectrum, the much larger Auger peaks generated by the electron beam can cause inconvenient clustering of Auger and photoelectron peaks. As in conventional x-ray photoelectron spectroscopy, the ability to switch between Al and Mg sources is useful in such situations. In this context, the authors have extended the studies to iron particles where the authors show that use of Al or Mg substrates, as necessary, can make a contribution to clear identification of individual components in the Fe 2p peaks. For this development in electron spectroscopy to achieve its full potential, it is necessary to optimize the beam conditions used to generate the local x-ray to give good selectivity of a given particle. Measurements made in support of this will be given. Of greater concern is a possible problem of local heating associated with x-ray generation. The authors continue to explore this problem and report some progress in minimizing heating of the particle while maintaining the particle selectivity that is central to this exciting development.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Identification of high payoff research for more efficient applicator helicopters in agriculture and forestry

The results of a study of the uses of helicopters in agriculture and forestry in the United States are discussed. Comparisons with agricultural airplanes are made in terms of costs of aerial application to the growers. An analysis of cost drivers and potential improvements to helicopters that will lower costs is presented. Future trends are discussed, and recommendations for research are outlined. Operational safety hazards and accident records are examined, and problem areas are identified. Areas where research and development are needed to provide opportunities for lowering costs while increasing productivity are analyzed.

Waters, K. T.↗

Expanded envelope concepts for aircraft control-element failure detection and identification

The purpose of this effort was to develop and demonstrate concepts for expanding the envelope of failure detection and isolation (FDI) algorithms for aircraft-path failures. An algorithm which uses analytic-redundancy in the form of aerodynamic force and moment balance equations was used. Because aircraft-path FDI uses analytical models, there is a tradeoff between accuracy and the ability to detect and isolate failures. For single flight condition operation, design and analysis methods are developed to deal with this robustness problem. When the departure from the single flight condition is significant, algorithm adaptation is necessary. Adaptation requirements for the residual generation portion of the FDI algorithm are interpreted as the need for accurate, large-motion aero-models, over a broad range of velocity and altitude conditions. For the decision-making part of the algorithm, adaptation may require modifications to filtering operations, thresholds, and projection vectors that define the various hypothesis tests performed in the decision mechanism. Methods of obtaining and evaluating adequate residual generation and decision-making designs have been developed. The application of the residual generation ideas to a high-performance fighter is demonstrated by developing adaptive residuals for the AFTI-F-16 and simulating their behavior under a variety of maneuvers using the results of a NASA F-16 simulation.

Weiss, Jerold L.↗

Scalable Extended Dynamic Mode Decomposition Using Random Kernel Approximation

The Koopman operator is a linear, infinite-dimensional operator that governs the dynamics of system observables; extended dynamic mode decomposition (EDMD) is a data-driven method for approximating the Koopman operator using functions (features) of the system state snapshots. This paper investigates an approach to EDMD in which the features used provide random approximations to a particular kernel function. The objective of this is computational economy for large data sets: EDMD is generally ill-suited for problems with large state dimension, and its dual kernel formulation (KDMD) is well-suited for such problems only if the number of data snapshots is relatively small. We discuss two specific methods for generating features: random Fourier features and the Nÿstrom method. The first method is a data-independent method for translation-invariant kernels only and involves random sampling in feature space; the second method is a data-dependent empirical method that may be used for any kernel and involves random sampling of data. We first discuss how these ideas may be applied in an EDMD context, as well as a means for adaptively adding random Fourier features. As a result, we demonstrate these methods on two example problems and conclude with an analysis of the relative benefits and drawbacks of each method.

59 BASIC BIOLOGICAL SCIENCES↗

Urban area delineation and detection of change along the urban-rural boundary as derived from LANDSAT digital data

LANDSAT digital multispectral scanner data, in conjunction with supporting ground truth, were investigated to determine their utility in delineation of urban-rural boundaries. The digital data for the metropolitan areas of Washington, D. C.; Austin, Texas; and Seattle, Washingtion; were processed using an interactive image processing system. Processing focused on identification of major land cover types typical of the zone of transition from urban to rural landscape, and definition of their spectral signatures. Census tract boundaries were input into the interactive image processing system along with the LANDSAT single and overlayed multiple date MSS data. Results of this investigation indicate that satellite collected information has a practical application to the problem of urban area delineation and to change detection.

Christenson, J. W.↗

Alsep data processing: How we processed Apollo Lunar Seismic Data

The Apollo lunar seismic station network gathered data continuously at a rate of 3 x 10 to the 8th power bits per day for nearly eight years until the termination in September, 1977. The data were processed and analyzed using a PDP-15 minicomputer. On the average, 1500 long-period seismic events were detected yearly. Automatic event detection and identification schemes proved unsuccessful because of occasional high noise levels and, above all, the risk of overlooking unusual natural events. The processing procedures finally settled on consist of first plotting all the data on a compressed time scale, visually picking events from the plots, transferring event data to separate sets of tapes and performing detailed analyses using the latter. Many problems remain especially for automatically processing extraterrestrial seismic signals.

Latham, G. V.↗

How we processed Apollo lunar seismic data

The Apollo lunar seismic station network gathered data continuously at a rate of 3 x 10 to the 8th bits per day for nearly eight years until termination in September, 1977. The data were processed and analyzed using a PDP-15 minicomputer. On average, 1500 long-period seismic events were detected yearly. Automatic event detection and identification schemes proved unsuccessful because of occasional high noise levels and, above all, the risk of overlooking unusual natural events. The processing procedures which were finally chosen consist of plotting all the data on a compressed time scale, visually picking events from the plots, transferring event data to separate sets of tapes and performing detailed analyses using the latter. Many problems remain, especially in the automatic processing of extraterrestrial seismic signals.

Nakamura, Y.↗

Restructurable controls for aircraft

Future aircraft with highly sophisticated controls are likely to have multiple interdependent failure modes which will be difficult for the pilot to recognize. Such failures may lead to unanticipated sequences of events from which the pilot cannot intuitively recover. Advances in the state-of-the-art in failure detection, failure identification, and control system technology suggest it may be feasible to detect and identify potentially catastrophic failures in flight controls and to restructure the controls in real time to execute a safe landing. Two accidents are reviewed, one in which the pilot successfully restructured the controls and one in which he did not, but for which a solution existed. The problem requirements and potential theoretical techniques which apply are also discussed.

Howell, W. E.↗

Large-scale motions on the sun - An overview

The history and present status of observations of large-scale velocity fields in the solar atmosphere are reviewed. Observations of the torsional oscillation and of mean meridional circulation suggest a connection of large-scale dynamics with the solar cycle. Significant problems must be solved before Doppler observations can match the precision of tracer measurements, particularly allowing for the effects of changes in line-profile asymmetries and for scattered light. Coordinated observations would establish the reliability of Doppler techniques, but Doppler measurements with precision of order 1 m/s made in a proper spatial-temporal window appear necessary for the identification of sub-global velocity fields varying with time-scales less than that of the solar cycle.

Bogart, Richard S.↗

Further Investigation of Employing Binomial Small-Sample Estimator in M-LROM

Reduced Order Modeling (ROM) is essential to enable the identification of the so-called active parameter subspace for high-fidelity models that are employed in computationally intensive analyses such as uncertainty characterization and data assimilation. Given the complexity of models for real-world application, brute force methods to identify the active subspace may not be computationally efficient to realize the value of reduction, since in realistic problems, the full scale model must be executed few hundred times, which may be computationally taxing. Earlier work has introduced a new approach, which represents a further development of our previous work on ROM, referred to as multi-level ROM (M-LROM). In M-LROM, approximate models are employed to identify the active subspace instead of the full scale model. In this summary, we present our recent results on M-LROM, specifically in regard to the construction of reliable error metrics that can bound the errors resulting from the reduction. The idea is to employ a lower fidelity model, i.e., an approximation of the full scale or high fidelity model, to build the active subspace, and via the proposed error bound, the quality of the active subspace can be determined by calculating an upper bound on the errors resulting from the reduction. For this approach to be practical, the error bound must be realistic, implying that it should be close to the actual errors expected, and not much higher. Therefore, an important goal of this summary is to compare different error bounds in terms of the relation between their estimated bounds to the actual errors. In particular, we compare the proposed error bound which numerically construct an estimator using binomial distribution to the widely used small-sample norm estimators. Unlike most probabilistic error estimation methods, the proposed bound employs a binomial distribution to construct the estimator whereas in other conventional methods, the distribution employed is typically the standard Gaussian, normalized over a unit hypersphere as initially proposed by the seminal paper of J. Dixon on random matrix theory. Previous publications provided evidence that the binomial distribution calculates more realistic bounds as compared to the Gaussian distribution, which tends to be conservative, implying that the bound is much bigger than the actual errors, which diminishes the value of the reduction, as now must increase the size of the active subspace to reach the desired upper bound on the reduction errors. This work has provided a rigorous approach by which error bounds on the reduction errors can be established without having to execute the high fidelity model during the construction of the active subspace. The high fidelity model is only need to test the error bound using small number of executions. This methodology paves the way for a more efficient application of ROM to complex engineering models, where standard ROM techniques may be too taxing to optimally realize their value in practical situations. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Identification of the dominant ULF wave mode and generation mechanism for obliquely propagating waves in the Earth's foreshock

Abstract We discuss mechanisms of the generation of ultralow frequency (ULF) upstream waves in the terrestrial foreshock that are essential for the acceleration of ions in space plasmas. The analysis is based on global hybrid kinetic simulations of the magnetosphere that provide realistic environment for the growth of the ULF waves in a quasi‐radial configuration of the interplanetary magnetic field. We focus on a long‐debated problem of the generation mechanism of oblique and parallel ULF waves and provide quantitative arguments in favor of the ion/ion cyclotron resonant instability. We also show that parallel propagating waves are predominantly generated in this configuration, but geometrical effects related to the phase space density in wave vector space lead to apparent predominance of obliquely propagating waves. Correspondence between the results outlined above and previously published experimental claims is thoroughly discussed and our results are shown to be consistent with spacecraft measurements.

Strumik, M.↗