Search NASA⌕ Search

SEARCH · Search NASA

Results for “interface diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Distribution of Copper States, Phases, and Defects across the Depth of a Cu-Doped CdTe Solar Cell

Copper has been used as a p-type dopant in cadmium telluride (CdTe) for decades. However, the density of Cu atoms in the finished device is much higher than that of holes, which means that most Cu atoms are not activated as acceptors during incorporation. Furthermore, studies have demonstrated that the distribution of copper (Cu) atoms across the device is highly inhomogeneous, with reports citing Cu substitution on Cd sites and segregation to grain boundaries. Fast diffusion along these boundaries and Cu accumulation at the CdTe/CdS interface have also been observed and validated computationally. These levels of inhomogeneity make it difficult to accurately characterize and correlate the performance with the nature of the Cu atomic species present. To address this challenge, we utilize X-ray microscopy and, specifically, nanoscale fluorescence-mode X-ray absorption near-edge structure to resolve the atomic Cu environment throughout the depth of the CdTe layer. Our results suggest that the majority of Cu atoms are in the form of Cu x Te phases (or similar local environments) near the ZnTe|CdTe interface, Cu x O phases in the CdTe absorber, and present in various oxidation states, including Cu 1+ and Cu 2+ , near the CdS/CdTe junction. Here this work also provides experimental evidence for the first time of the presence of CuS around the ZnTe|CdTe interface and the hypothesized Cu Cd -Cl i complex in the CdTe absorber.

14 SOLAR ENERGY↗

Influence of Surface Ligands on Energetics at FASnI 3 /C 60 Interfaces and Their Impact on Photovoltaic Performance

Interfacial chemistry and energetics significantly impact the performance of photovoltaic devices. In the case of Pb-containing organic metal halide perovskites, photoelectron spectroscopy has been used to determine the energetic alignment of frontier electronic energy levels at various interfaces present in the photovoltaic device. For the Sn-containing analogues, which are less toxic, no such measurements have been made. Through a combination of ultraviolet, inverse, and X-ray photoelectron spectroscopy (UPS, IPES, and XPS, respectively) measurements taken at varying thickness increments during stepwise deposition of C 60 on FASnI 3 , we present the first direct measurements of the frontier electronic energy levels across the FASnI 3 /C 60 interface. The results show band bending in both materials and transport gap widening in FASnI 3 at the interface with C 60 . The XPS results show that iodide diffuses into C 60 and results in n-doping of C 60 . This iodide diffusion out of FASnI 3 impacts the valence and conduction band energies of FASnI 3 more than the core levels, with the core level shifts displaying a different trend than the valence and conduction bands. Surface treatment of FASnI 3 with carboxylic acids and bulky ammonium substituted surface ligands results in slight alterations in the interfacial energetics, and all surface ligands result in similar or improved PV performance relative to the untreated devices. Finally, the greatest PV stability results from treatment with a fluorinated carboxylic acid derivative; however, iodide diffusion is still observed to occur with this surface ligand.

interfacial energetics↗

Temperature Coefficients of Perovskite Photovoltaics for Energy Yield Calculations

Temperature coefficients for maximum power (TPCE), open circuit voltage (VOC), and short circuit current (JSC) are standard specifications included in data sheets for any commercially available photovoltaic module. To date, there has been little work on determining the TPCE for perovskite photovoltaics (PV). We fabricate perovskite solar cells with a TPCE of -0.08 rel %/°C and then disentangle the temperature-dependent effects of the perovskite absorber, contact layers, and interfaces by comparing different device architectures and using drift-diffusion modeling. A main factor contributing to the small TPCE of perovskites is their low intrinsic carrier concentrations with respect to Si and GaAs, which can be explained by its wider band gap. In this work, we demonstrate that the unique increase in Eg with increasing temperatures seen for perovskites results in a reduction in JSC but positively influences VOC. The current limiting factors for the TPCE in perovskite PV are identified to originate from interfacial effects.

14 SOLAR ENERGY↗

Epitaxial growth of Co{sub 2}MnSi thin films at the vicinal surface of n-Ge(111) substrate

The structure and magnetic properties of Co{sub 2}MnSi films on n-Ge(111) substrate were investigated for the motivation of spin injection. The 50-nm-thick Co{sub 2}MnSi films were fabricated on n-Ge(111) substrates by dc sputtering and postannealed about 1 h at the various temperatures ranging from 200-500 deg. C. In the annealing temperature range of 300-400 deg. C, the Co{sub 2}MnSi were grown epitaxially at the vicinal surface of n-Ge(111) substrates. The epitaxial layer of Co{sub 2}MnSi films was about 18 nm thick at 350 deg. C and exhibited ferromagnetic behavior. Interestingly, there was no diffusion of Ge inside the epitaxial layer and atomically flat interface was obtained.

36 MATERIALS SCIENCE↗

Synthesis of L1{sub 0}-FePt perpendicular films with controllable coercivity and intergranular exchange coupling by interfacial microstructure control

A series of FePtBi/Au multilayers were fabricated by magnetron sputtering. The interfacial microstructure control of Bi and Au atoms and its effect on comprehensive properties of L1{sub 0}-FePt perpendicular films were carefully studied. Results show that: perpendicular magnetic anisotropy of the L1{sub 0}-FePt film can be remarkably enhanced with the epitaxial inducement of Au atoms. On the other hand, intergranular exchange coupling (IEC) of the film is greatly decreased due to the isolation of FePt particles by nonmagnetic Au particles. Moreover, the controllable coercivity of the film can be realized by adjusting ordering degree of the film through diffusion of Bi atoms. Thus, an L1{sub 0}-FePt perpendicular film with controllable coercivity and no IEC is realized with the interfacial microstructure control of surfactant Bi and Au atoms.

36 MATERIALS SCIENCE↗

Growth mechanism of ZnO low-temperature homoepitaxy

The authors report on the growth mechanism of ZnO homoepitaxy at the low-temperature range of 500 deg. C, which is unavailable to obtain high-quality ZnO films in heteroepitaxy. One typical set of ZnO films were grown on (0001) ZnO substrates by molecular-beam epitaxy: a standard structure without buffer and two buffered structures with high-temperature (HT) homobuffer and low-temperature (LT) homobuffer. As a result, the LT homobuffered structure had the outstanding material properties: the surface roughness is 0.9 nm, the full width at half maximum of x-ray rocking curve is 13 arcsec, and the emission linewidth of donor-bound excitons is 2.4 meV. In terms of the theoretical interpretation of the experimentally obtained electron mobilities, it was found that the LT homobuffered structure suffers less from the dislocation scattering and the ionized-impurity scattering compared to the HT homobuffered structure. It is proposed that, in the ZnO low-temperature homoepitaxy, the LT homobuffer plays a key role in inducing the complete termination of dislocations in the homointerface and suppressing the outdiffusion of contaminants and point defects on the ZnO surface, which results in the formation of smooth wetting layer on the homointerface.

36 MATERIALS SCIENCE↗

Thermal conductivity of ZnO thin film produced by reactive sputtering

ZnO thin films have been produced by reactive sputtering with different oxygen contents in the sputtering gas. As a result of transmission electronic microscopy observation, each film consist of two layers: an interfacial layer close to the substrate, with a thickness of about 200 nm, composed of very fine crystal grains and an upper layer above the interfacial layer, composed of column-shaped grains aligned along the out-plane direction. The grain diameter ranges from 35 to 100 nm depending on the oxygen partial pressure. The in-plane and out-plane thermal conductivity have been measured at room temperature. The out-plane thermal conductivity of the interfacial layer is 2.3 W m{sup -1} K{sup -1}, independent on the oxygen partial pressure. The out-plane thermal conductivity of the upper layer is 5.4, 7.1, and 4.0 W m{sup -1} K{sup -1}, and the in-plane thermal conductivity 4.86, 6.01, and 2.66 W m{sup -1} K{sup -1}, for the O{sub 2} 30%, 60%, and 90% ZnO film, respectively. Both out-plane and in-plane thermal conductivity decrease with the decrease of grain diameter. The thermal conductance of grain boundary has been estimated with the phonon diffusion mismatch model, and the intrinsic thermal conductivity within ZnO grains has been calculated with a cylinder-structured composite model. The result shows that the thermal conductivity of the ZnO thin films is dominated by the intrinsic thermal conductivity, which is a function of grain size.

36 MATERIALS SCIENCE↗

Machine learned interatomic potential for dispersion strengthened plasma facing components

Tungsten (W) is a material of choice for the divertor material due to its high melting temperature, thermal conductivity, and sputtering threshold. However, W has a very high brittle-to-ductile transition temperature, and at fusion reactor temperatures (≥1000 K), it may undergo recrystallization and grain growth. Dispersion-strengthening W with zirconium carbide (ZrC) can improve ductility and limit grain growth, but much of the effects of the dispersoids on microstructural evolution and thermomechanical properties at high temperatures are still unknown. We present a machine learned Spectral Neighbor Analysis Potential for W–ZrC that can now be used to study these materials. In order to construct a potential suitable for large-scale atomistic simulations at fusion reactor temperatures, it is necessary to train on ab initio data generated for a diverse set of structures, chemical environments, and temperatures. Further accuracy and stability tests of the potential were achieved using objective functions for both material properties and high temperature stability. Additionally, validation of lattice parameters, surface energies, bulk moduli, and thermal expansion is confirmed on the optimized potential. Tensile tests of W/ZrC bicrystals show that although the W(110)–ZrC(111) C-terminated bicrystal has the highest ultimate tensile strength (UTS) at room temperature, observed strength decreases with increasing temperature. At 2500 K, the terminating C layer diffuses into the W, resulting in a weaker W–Zr interface. Meanwhile, the W(110)–ZrC(111) Zr-terminated bicrystal has the highest UTS at 2500 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evaluation of lithium as a tritium storage medium for betavoltaics

Lithium foils were demonstrated to absorb surrogate protium for tritium-powered betavoltaics. 20μm thick lithium foils were hole-punched from a ribbon of electrodeposited lithium on copper foil. The lithium foils were loaded with hydrogen in a custom Sievert apparatus where the pressure drop showed full hydriding at a hydrogen pressure of 2 bar and at all loading temperatures above the lithium melting point at 190, 200, 225, 250, and 300. Lithium hydride formation was confirmed with Raman spectroscopy after hydrogen loading. The kinetics of experimental hydride formation was compared to the diffusion-limited Mintz–Bloch model. While the Mintz–Bloch model showed good fit with the experimental loadings, the model overpredicted the loading kinetics starting at 250 °C and at higher temperatures. In conclusion, The overprediction was either caused by lithium hydride outgassing due to some reduction with some residual lithium hydroxide created from brief air exposure when sealing the lithium in the reactor or a transition from diffusion-limited hydride growth to surface or metal–hydride interface-limited hydride growth.

25 ENERGY STORAGE↗

Effect of particle shape on stratification in drying films of binary colloidal mixtures

The role of particle shape in evaporation-induced auto-stratification in polydisperse colloidal suspensions is explored with molecular dynamics simulations of mixtures of spheres and aspherical particles. A unified framework based on the competition between diffusion and diffusiophoresis is proposed to understand the effects of shape and size dispersity. In general, particles diffusing more slowly (e.g., larger particles) tend to accumulate more strongly at the evaporation front. However, larger particles have larger surface areas and therefore greater diffusiophoretic mobility. Hence, they are more likely to be driven away from the evaporation front via diffusiophoresis. For a rapidly dried bidisperse suspension containing small and large spheres, the competition leads to “small-on-top” stratification. Here, we employ a computational model in which the diffusion coefficient is inversely proportional to particle mass. For a mixture of spheres and aspherical particles with similar mass, the diffusion contrast is reduced, and the spheres are always enriched at the evaporation front as they have the smallest surface area for a given mass and, therefore, the lowest diffusiophoretic mobility. Furthermore, for a mixture of solid and hollow spheres that have the same outer radius and thus the same surface area, the diffusiophoretic contrast is suppressed, and the system is dominated by diffusion. Consequently, the solid spheres, which have a larger mass and diffuse more slowly, accumulate on top of the hollow spheres. Finally, for a mixture of thin disks and long rods that differ significantly in shape but have similar mass and surface area, both diffusion and diffusiophoresis contrasts are suppressed, and the mixture does not stratify.

Classical molecular dynamic simulations↗

Brittle-plastic relaxation of misfit stresses in the Si(001)/Si{sub 1-x}Ge{sub x} system

It is found that stressed luminescent samples of Si(001)/Si{sub 1-x}Ge{sub x}/Si with a germanium concentration of up to 16% contain microcracks. In contrast to ordinary cracks, microcracks are characterized by partial cracks of the substrate that are not perpendicular to the plane of the plate and are detected by specially designed X-ray analysis techniques. In a 60-nm-thick layer of SiGe with a germanium concentration of 5%, individual microcracks arise in samples near the edges of the same type, and the traces of these microcracks coincide with the ripple profiles of the corrugated growth surface. As the germanium concentration increases, first, the number of microcracks near the edges of a sample increases, while the corrugated growth relief nearly completely disappears, and then microcracks appear even in the central region of the sample, thus leading to the vanishing of the curvature of the structure in this region without visible signs of plastic relaxation. At the same time, even a thin (20 nm) layer of SiGe exhibits a layered structure, and diffuse scattering near the peak of the SiGe layer increases, which points to the presence of fragments of the layer that are misoriented by {+-}0.015 Degree-Sign ; the intensity of the diffuse scattering may amount to 0.5% of the layer intensity. A spatial analysis of the luminescence of samples with microcracks shows that the emergence of microcracks hardly affects the peak position and the half-width of the emission line of the SiGe layer. At the same time, the intensity of exciton emission from both the SiGe layer and the bulk of silicon is significantly (several times) changed when passing to the regions with microcracks. All the phenomena observed can be accounted for under the assumption that, between the stages of the loss of the plane crystallization front and the development of plastic relaxation of misfit stresses, there exists an earlier unknown stage of growth in which the concentration of nonequilibrium vacancies increases by four to five orders of magnitude and then the vacancies condensate into micropores.

36 MATERIALS SCIENCE↗

Final Report for Department of Energy/EERE (for public release)

Developing CIGS solar cells calls for the understanding of materials and processing in order to translate the record small efficiency to module and the strategy to produce thin cells for materials and processing saving. This project has exploited nanostructuring of CIG solar cells, including nanowires and nanotextured substrates. We showed that nanowires function as well-defined CIGS-CdS p-n junction for understanding the chemical fluctuation, defect formation interface and grain boundary behaviors and the effect of ion diffusion, which are important but complicated issues for solar cell fabrication. We have also demonstrated effective nanoscale photon management on nanotextured substrate to provide opportunity for thin CIGS solar cells. We also developed the scalable methods for producing such nanotextured substrates. The research output in this project helps advancing the CIGS solar cells and broadly other solar cell technologies in cost reduction per unit power.

14 SOLAR ENERGY↗

Some observations on the characteristics of low-cost silicon sheets

To meet the need for low cost silicon sheet material in the ERDA/JPL photovoltaics program, JPL has initiated a wide ranging technology development effort in crystal growth that includes several different technology thrusts. They range in scope from innovative ingot growth and multislice wafering, to shaped growth techniques, substrate-related processes and hot forming techniques. In this paper, some salient observations on materials resulting from these processes are reported. Included are multiblade wafering-induced damage studies, interface morphology studies on the heat exchanger cast silicon, some diffusion length measurements in thin silicon layers on ceramic substrates, and results on the equilibrium structure found in laser zone ribbon growth.

Digges, T. G., Jr.↗

Non-isothermal effects on SO2 absorption by water droplets. I - Model development. II - Results and discussion

An analytic model of SO2 absorption in a falling water droplet is developed and a simulation of SO2 washout is performed. Nonisothermic effects on drop growth, droplet physical parameters, reaction rates, and multicomponent diffusion are treated in the model. The gas-liquid interface is assumed to be at equilibrium, and interfacial resistance is negligible. Raindrops are simulated as falling from a 2 km height through an atmospheric region containing SO2. The droplets decrease in size from evaporation and cooling, and their slightly basic pH aids SO2 absorption. The simulation indicates higher SO2 absorption at higher altitudes, and desorption may occur at ground level. Isothermal effects are concluded to be significant, and quantification of effects will depend on further modelling.

Reda, M.↗

Two-dimensional CFD modeling of wave rotor flow dynamics

A two-dimensional Navier-Stokes solver developed for detailed study of wave rotor flow dynamics is described. The CFD model is helping characterize important loss mechanisms within the wave rotor. The wave rotor stationary ports and the moving rotor passages are resolved on multiple computational grid blocks. The finite-volume form of the thin-layer Navier-Stokes equations with laminar viscosity are integrated in time using a four-stage Runge-Kutta scheme. The Roe approximate Riemann solution scheme or the computationally less expensive Advection Upstream Splitting Method (AUSM) flux-splitting scheme are used to effect upwind-differencing of the inviscid flux terms, using cell interface primitive variables set by MUSCL-type interpolation. The diffusion terms are central-differenced. The solver is validated using a steady shock/laminar boundary layer interaction problem and an unsteady, inviscid wave rotor passage gradual opening problem. A model inlet port/passage charging problem is simulated and key features of the unsteady wave rotor flow field are identified. Lastly, the medium pressure inlet port and high pressure outlet port portion of the NASA Lewis Research Center experimental divider cycle is simulated and computed results are compared with experimental measurements. The model accurately predicts the wave timing within the rotor passage and the distribution of flow variables in the stationary inlet port region.

Welch, Gerard E.↗

Two-dimensional CFD modeling of wave rotor flow dynamics

A two-dimensional Navier-Stokes solver developed for detailed study of wave rotor flow dynamics is described. The CFD model is helping characterize important loss mechanisms within the wave rotor. The wave rotor stationary ports and the moving rotor passages are resolved on multiple computational grid blocks. The finite-volume form of the thin-layer Navier-Stokes equations with laminar viscosity are integrated in time using a four-stage Runge-Kutta scheme. Roe's approximate Riemann solution scheme or the computationally less expensive advection upstream splitting method (AUSM) flux-splitting scheme is used to effect upwind-differencing of the inviscid flux terms, using cell interface primitive variables set by MUSCL-type interpolation. The diffusion terms are central-differenced. The solver is validated using a steady shock/laminar boundary layer interaction problem and an unsteady, inviscid wave rotor passage gradual opening problem. A model inlet port/passage charging problem is simulated and key features of the unsteady wave rotor flow field are identified. Lastly, the medium pressure inlet port and high pressure outlet port portion of the NASA Lewis Research Center experimental divider cycle is simulated and computed results are compared with experimental measurements. The model accurately predicts the wave timing within the rotor passages and the distribution of flow variables in the stationary inlet port region.

Welch, Gerard E.↗

Data and Modeling of Dendrites Subject to A Step Change in Pressure (TDSE)

There is considerable interest in dendritic solidification because of the influence dendrites have in the determination of microstructure, and thereby in the physical properties of cast metals and alloys. Current theories and models of dendritic growth generally couple diffusion effects in the melt with the physics of the interface. Data and subsequent analysis prior of the tip growth speed and radii of thermal succinonitrile dendrites in the near-convection free, on-orbit, free-fall environment demonstrate that these theories yield predictions that are reasonably in agreement with the results of experiment. However, data and analysis for assessing the interfacial physics component of theory are not sufficiently detailed or definitive. To study fundamental aspects of dendritic interface stability, we are measuring and modeling the kinetics and morphology of dendrites as they evolve from one well-defined steady state at a pre-set supercooling, through a transient stage, to a different well-defined steady state. More specifically, we subject succinonitrile dendrites, growing under steady-state conditions, to a rapid change in pressure. This leads to a rapid change in thermal driving force from the corresponding change in both the equilibrium melting temperature due to the Clapeyron effect, and a change in the far-field temperature due to adiabatic temperature changes in the bulk liquid and solid. Subsequently, we observe transformations from a well-characterized initial state into a new steady-state. Initial data reveal that the dendrite tip velocity changes almost as fast as the pressure charges, while the tip radius changes occur more slowly, taking from 10 60 seconds depending on the size of the step change and the final supercooling. Computer modeling of this process shows both agreements and disagreements with the experimental data. In making these observations and measurements, we are gaining new understandings of interfacial dynamics and state-selection physics.

Koss, Matthew B.↗