Search NASA⌕ Search

SEARCH · Search NASA

Results for “interlayer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Reexamination of the effective fine structure constant of graphene as measured in graphite

Here we present a refined and improved study of the influence of screening on the effective fine structure constant of graphene, α*, as measured in graphite using inelastic x-ray scattering. This followup to our previous study [J. P. Reed et al., Science 330, 805 (2010)] was carried out with two times better energy resolution, five times better momentum resolution, and an improved experimental setup with lower background. We compare our results to random-phase approximation (RPA) calculations and evaluate the relative importance of interlayer hopping, excitonic corrections, and screening from high energy excitations involving the sigma bands. We find that the static, limiting value of α* falls in the range 0.25-0.35, which is higher than our previous result of 0.14, but still below the value expected from RPA. We show the reduced value is not a consequence of interlayer hopping effects, which were ignored in our previous analysis, but of a combination of excitonic effects in the π→ π* particle-hole continuum, and background screening from the σ-bonded electrons. We find that σ-band screening is extremely strong at distances of less than a few nanometers, and should be highly effective at screening out short-distance, Hubbard-like interactions in graphene as well as other carbon allotropes.

36 MATERIALS SCIENCE↗

Surface nematic order in iron pnictides

Electronic nematicity plays an important role in iron-based superconductors. These materials have a layered structure and the theoretical description of their magnetic and nematic transitions has been well established in the two-dimensional approximation, i.e., when the layers can be treated independently. However, the interaction between iron layers mediated by electron tunneling may cause nontrivial three-dimensional behavior. Starting from the simplest model for orbital nematic in a single layer, we investigate the influence of interlayer tunneling on the bulk nematic order and a possible preemptive state where this order is only formed near the surface. In addition, we found that the interlayer tunneling suppresses the bulk nematicity, which makes favorable the formation of a surface nematic order above the bulk transition temperature. The purely electronic tunneling Hamiltonian, however, favors a nematic order parameter that alternates from layer to layer. The uniform bulk state typically observed experimentally may be stabilized by the coupling with the elastic lattice deformation. Depending on the strength of this coupling, we found three regimes: (i) surface nematic and alternating bulk order, (ii) surface nematic and uniform bulk order, and (iii) uniform bulk order without the intermediate surface phase. Lastly, the intermediate surface-nematic state may resolve the current controversy about the existence of a weak nematic transition in the compound BaFe 2 As 2-x P x .

36 MATERIALS SCIENCE↗

Chemical pressure effect on the optical conductivity of the nodal-line semimetals ZrSi Y ( Y = S,Se,Te) and ZrGe Y ( Y = S,Te)

ZrSiS is a nodal-line semimetal, whose electronic band structure contains a diamond-shaped line of Dirac nodes. We carried out a comparative study on the optical conductivity of ZrSiS and the related compounds ZrSiSe, ZrSiTe, ZrGeS, and ZrGeTe by reflectivity measurements over a broad frequency range combined with density functional theory calculations. The optical conductivity exhibits a distinct U shape, ending at a sharp peak at around 10 000 cm –1 for all studied compounds except for ZrSiTe. The U shape of the optical conductivity is due to transitions between the linearly dispersing bands crossing each other along the nodal line. The sharp high-energy peak is related to transitions between almost parallel bands, and its energy position depends on the interlayer bonding correlated with the c/a ratio, which can be tuned by either chemical or external pressure. For ZrSiTe, another pair of crossing bands appears in the vicinity of the Fermi level, corrugating the nodal-line electronic structure and leading to the observed difference in optical conductivity. Here, the findings suggest that the Dirac physics in ZrXY compounds with X = Si,Ge and Y = S,Se,Te is closely connected to the interlayer bonding.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Instability of flux flow and production of vortex-antivortex pairs by current-driven Josephson vortices in layered superconductors

We report numerical simulations of the nonlinear dynamics of Josephson vortices driven by strong dc currents in layered superconductors. Dynamic equations for interlayer phase differences in a stack of coupled superconducting layers were solved to calculate a drag coefficient η(J) of the vortex as a function of the perpendicular dc current density J. It is shown that Cherenkov radiation produced by a moving vortex causes significant radiation drag increasing η(v) at high vortex velocities v and striking instabilities of driven Josephson vortices moving faster than a terminal velocity v c . The steady-state flux flow breaks down at v > v c as the vortex starts producing a cascade of expanding vortex-antivortex pairs evolving into either planar macrovortex structures or branching flux patterns propagating both along and across the layers. This vortex-antivortex pair production triggered by a rapidly moving vortex is most pronounced in a stack of underdamped planar junctions where it can occur at J > J s well below the interlayer Josephson critical current density. Both v c and J s were calculated as functions of the quasiparticle damping parameter, and the dc magnetic field was applied parallel to the layers. The effects of vortex interaction on the Cherenkov instability of moving vortex chains and lattices in annular stacks of Josephson junctions were considered. It is shown that a vortex driven by a current density J > J s in a multilayer of finite length excites self-sustained large-amplitude standing waves of magnetic flux, resulting in temporal oscillations of the total magnetic moment. We evaluated a contribution of this effect to the power W radiated by the sample and showed that W increases strongly as the number of layers increases. Furthermore, these mechanisms can result in nonlinearity of the c-axis electromagnetic response and contribute to THz radiation from the layered cuprates at high dc current densities flowing perpendicular to the ab planes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Anyon Condensation and Continuous Topological Phase Transitions in Non-Abelian Fractional Quantum Hall States

We find a series of possible continuous quantum phase transitions between fractional quantum Hall states at the same filling fraction in two-component quantum Hall systems. These can be driven by tuning the interlayer tunneling and/or interlayer repulsion. One side of the transition is the Halperin (p,p,p-3) Abelian two-component state, while the other side is the non-Abelian Z{sub 4} parafermion (Read-Rezayi) state. We predict that the transition is a continuous transition in the 3D Ising class. The critical point is described by a Z{sub 2} gauged Ginzburg-Landau theory. These results have implications for experiments on two-component systems at {nu}=2/3 and single-component systems at {nu}=8/3.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Face Centered Cubic and Hexagonal Close Packed Skyrmion Crystals in Centrosymmetric Magnets

Skyrmions are disklike objects that typically form triangular crystals in two-dimensional systems. This situation is analogous to the so-called pancake vortices of quasi-two-dimensional superconductors. The way in which Skyrmion disks or “pancake Skyrmions” pile up in layered centrosymmetric materials is dictated by the interlayer exchange. Here, unbiased Monte Carlo simulations and simple stabilization arguments reveal face centered cubic and hexagonal close packed Skyrmion crystals for different choices of the interlayer exchange, in addition to the conventional triangular crystal of Skyrmion lines. Moreover, an inhomogeneous current induces a sliding motion of pancake Skyrmions, indicating that they behave as effective mesoscale particles.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Anomalous Drag in Electron-Hole Condensates with Granulated Order

We explain the strong interlayer drag resistance observed at low temperatures in bilayer electron-hole systems in terms of an interplay between local electron-hole-pair condensation and disorder-induced carrier density variations. Smooth disorder drives the condensate into a granulated phase in which interlayer coherence is established only in well-separated and disconnected regions, or grains, within which the densities of electrons and holes accidentally match. The drag resistance is then dominated by Andreev-like scattering of charge carriers between layers at the grains that transfers momentum between layers. We show that this scenario can account for the observed dependence of the drag resistivity on temperature and, on average, charge imbalance between layers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spin Waves in Dirac Semimetal Ca 0.6⁢ Sr 0.4⁢ MnSb 2 Investigated with Neutrons by the Diffraction Method

The tunability of Dirac semimetals with antiferromagnetic Mn layers is of great interest. The observed sign change of interlayer magnetic coupling between CaMnBi 2 and SrMnBi 2 suggests ionic substitution as a potential tuning mechanism. If so, novel behavior near the compensation point could be expected. Here, to explore this, we study a mixed-cation analog, Ca 0.6⁢ Sr 0.4⁢ MnSb 2 , where Bi is replaced by Sb. Conventional inelastic neutron scattering is impractical due to the small crystal size (m ≈ 0.28 g) available for compositional studies; however, we find that using a neutron diffractometer with a wide-angle area detector we can obtain a good quality spin-wave signal, which is shaped by energy-momentum conservation and retains spectroscopic information even without direct energy analysis. Spin-wave modeling reveals an interlayer coupling quantitatively similar to SrMnSb 2 , indicating it is not directly tuned by ionic size and that the sign change in Bi-based compounds likely arises from the observed change in lattice symmetry. Beyond this key insight, our results present an efficient method for parametric and compositional studies of spin dynamics in small crystals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Emergence of flat-band magnetism and half-metallicity in twisted bilayer graphene

Evidence of flat-band magnetism and half-metallicity in compressed twisted bilayer graphene is provided with first-principles calculations. In this article, we show that dynamic band-structure engineering in twisted bilayer graphene is possible by controlling the chemical composition with extrinsic doping, the interlayer coupling strength with pressure, and the magnetic ordering with external electric field. By varying the rotational order and reducing the interlayer separation, an unbalanced distribution of charge density results in the spontaneous apparition of localized magnetic moments without disrupting the structural integrity of the bilayer. Weak exchange correlation between magnetic moments is estimated in large unit cells. External electric field switches the local magnetic ordering from ferromagnetic to antiferromagnetic. Substitutional doping shifts the chemical potential of one spin distribution and leads to half-metallicity. Lastly, flakes of compressed twisted bilayer graphene exhibit spontaneous magnetization, demonstrating that correlation between magnetic moments is not a necessary condition for their formation.

36 MATERIALS SCIENCE↗

Site-Specific Structure at Multiple Length Scales in Kagome Quantum Spin Liquid Candidates

Realizing a quantum spin liquid (QSL) ground state in a real material is a leading issue in condensed matter physics research. In this pursuit, it is crucial to fully characterize the structure and influence of defects, as these can significantly affect the fragile QSL physics. In this work, we perform a variety of cutting-edge synchrotron x-ray scattering and spectroscopy techniques, and we advance new methodologies for site-specific diffraction and L-edge Zn absorption spectroscopy. The experimental results along with our first-principles calculations address outstanding questions about the local and long-range structures of the two leading kagome QSL candidates, Zn-substituted barlowite Cu 3 Zn x Cu 1-x (OH) 6 FBr and herbertsmithite Cu 3 Zn(OH) 6 Cl 2 . On all length scales probed, there is no evidence that Zn substitutes onto the kagome layers, thereby preserving the QSL physics of the kagome lattice. Our calculations show that antisite disorder is not energetically favorable and is even less favorable in Zn-barlowite compared to herbertsmithite. Site-specific x-ray diffraction measurements of Zn-barlowite reveal that Cu 2+ and Zn 2+ selectively occupy distinct interlayer sites, in contrast to herbertsmithite. Using the first measured Zn L-edge inelastic x-ray absorption spectra combined with calculations, we discover a systematic correlation between the loss of inversion symmetry from pseudo-octahedral (herbertsmithite) to trigonal prismatic coordination (Zn-barlowite) with the emergence of a new peak. Overall, our measurements suggest that Zn-barlowite has structural advantages over herbertsmithite that make its magnetic properties closer to an ideal QSL candidate: its kagome layers are highly resistant to nonmagnetic defects while the interlayers can accommodate a higher amount of Zn substitution.

36 MATERIALS SCIENCE↗

Ferromagnetic MnBi 4 Te 7 obtained with low-concentration Sb doping: A promising platform for exploring topological quantum states

The tuning of the magnetic phase, chemical potential, and structure is crucial to observe diverse exotic topological quantum states in Mn Bi 2 Te 4 (Bi 2 Te 3 ) m (m = 0–3). Here we show a ferromagnetic (FM) phase with a chiral crystal structure in Mn (Bi 1–x Sb x ) 4 Te 7 , obtained via tuning the growth conditions and Sb concentration. Unlike previously reported Mn (Bi 1–x Sb x ) 4 Te 7 , which exhibits FM transitions only at high Sb doping levels, our samples show FM transitions (T C = 13.5 K) at 15%–27% doping levels. Furthermore, our single-crystal x-ray-diffraction structure refinements find Sb doping leads to a chiral structure with the space group of P3, contrasted with the centrosymmetric $P\bar{3}m1$ crystal structure of the parent compound MnBi 4 Te 7 . Through angle-resolved photoemission spectroscopy measurements, we also demonstrated that the nontrivial band topology is preserved in the Sb-doped FM samples. Given that the nontrivial band topology of this system remains robust for low Sb doping levels, our success in making FM Mn(Bi 1–x Sb x ) 4 Te 7 with x = 0.15, 0.175, 0.2, and 0.27 paves the way for realizing the predicted topological quantum states, such as the axion insulator and Weyl semimetals. Additionally, we also observed magnetic glassy behavior in both antiferromagnetic MnBi 4 Te 7 and FM Mn (Bi 1–x Sb x )4 Te 7 samples, which we believe originates from cluster spin-glass phases coexisting with long-range antiferromagnetic/FM orders. Further, we have also discussed how the antisite Mn ions impact the interlayer magnetic coupling and how FM interlayer coupling is stabilized in this system.

36 MATERIALS SCIENCE↗

Single crystal growth, chemical defects, magnetic and transport properties of antiferromagnetic topological insulators ( Ge 1 – δ – x Mn x ) 2 Bi 2 Te 5 ( x ≤ 0.47 , 0.11 ≤ δ ≤ 0.20 )

Magnetic topological insulators provide a platform for emergent phenomena arising from the interplay between magnetism and band topology. Here we report the single crystal growth, crystal structure, magnetic and transport properties, as well as the neutron scattering studies of topological insulator series (Ge 1–δ–x Mn x ) 2 ⁢Bi 2 ⁢Te 5 (x ≤ 0.47, 0.11 ≤ δ ≤ 0.20). Upon doping up to x = 0.47, the lattice parameter c decreases by 0.8%, while the lattice parameter a remains nearly unchanged. Significant Ge vacancies and Ge/Bi site mixing are revealed via elemental analysis as well as refinements of the neutron and x-ray diffraction data, resulting in holes dominating the charge transport. At x = 0.47, below 10.8 K, a bilayer A-type antiferromagnetic ordered state emerges, featuring an ordered moment of 3.0(3) μ B /Mn at 5 K, with the c axis as the easy axis. Magnetization data unveils a much stronger effective interlayer antiferromagnetic exchange interaction and a much smaller uniaxial anisotropy compared to MnBi 2 ⁢Te 4 . We attribute the former to the shorter nearest-neighbor Mn-Mn interlayer superexchange path and the latter to the smaller ligand-field splitting in (Ge 1–δ–x ⁢Mn x ) 2 ⁢Bi 2 ⁢Te 5 . Finally, our study demonstrates that this series of materials holds promise for the investigation of the layer Hall effect and quantum metric nonlinear Hall effect.

36 MATERIALS SCIENCE↗

Magnetic evolution induced by freezing of Ag + fluctuations in an intercalated transition metal dichalcogenide

Here, we present a comprehensive study on the magnetic evolution processes in AgCrSe 2 using both neutron scattering and theoretical calculations. Additionally, the development of magnetic short-range correlation with decoupled interlayer interactions is confirmed between 55 and 200 K. Significant magneto-crystalline anisotropy energy around 0.1 meV of Cr 3+ is identified that mainly contributes to the robust existence of the in-plane magnetic correlations in the magnetic short-order regime. Furthermore, the indirect superexchange interactions through Cr-Se-Ag-Se-Cr path between the adjacent CrSe 6 octahedral layers is also demonstrated. In combination with the mutual coupling among multiple degrees of freedom (spin, phonon, lattice, and dipole), we reveal the key role of the freezing of Ag + fluctuations in preventing interlayer exchange interactions from decoupling.

36 MATERIALS SCIENCE↗

Site Mixing for Engineering Magnetic Topological Insulators

The van der Waals compound, MnBi 2 Te 4 , is the first intrinsic magnetic topological insulator, providing a materials platform for exploring exotic quantum phenomena such as the axion insulator state and the quantum anomalous Hall effect. However, intrinsic structural imperfections lead to bulk conductivity, and the roles of magnetic defects are still unknown. With higher concentrations of the same types of magnetic defects, the isostructural compound MnSb 2 Te 4 is a better model system for a systematic investigation of the connections among magnetism, topology, and lattice defects. In this work, the impact of antisite defects on the magnetism and electronic structure is studied in MnSb 2 Te 4 . Mn-Sb site mixing leads to complex magnetic structures and tunes the interlayer magnetic coupling between antiferromagnetic and ferromagnetic. The detailed nonstoichiometry and site mixing of MnSb2Te4 crystals depend on the growth parameters, which can lead to ≈40% of Mn sites occupied by Sb and ≈15% of Sb sites by Mn in as-grown crystals. Single-crystal neutron diffraction and electron microscopy studies show nearly random distribution of the antisite defects. Band structure calculations suggest that the Mn-Sb site mixing favors a ferromagnetic interlayer coupling, consistent with experimental observation, but is detrimental to the band inversion required for a nontrivial topology. Overall, our results suggest a long-range magnetic order of Mn ions sitting on Bi sites in MnBi 2 Te 4 . The effects of site mixing should be considered in all layered heterostructures that consist of alternating magnetic and topological layers, including the entire family of MnTe(Bi 2 Te 3 )n, its Sb analogs, and their solid solution.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Kinetic Effects of Anion Clusters on the Interfacial Stability between Solid-State Electrolyte and Metal Anode

The success of all-solid-state batteries (ASSBs) depends on the solid-state electrolyte (SSE) exhibiting high interfacial stability and room-temperature ionic conductivity. However, the current SSEs, especially those with practical ionic conductivities (≥10 –3 S/cm) at room temperature, often develop unstable interfaces at the metal anode, in some cases with even greater severity than with liquid organic electrolytes. Despite persistent efforts, achieving interfacial stability and sufficient ionic conductivity simultaneously represents one of the greatest challenges in ASSBs. The current approaches focus on stabilizing the interface by incorporating secondary interlayers or introducing coatings by surface engineering. The method is often material-specific, and the added interlayers often deteriorate during cycling. In this work, using phase analysis and explicit interface modeling, we demonstrate a strategy to kinetically stabilize the interface between the SSE and metal anode by incorporating selected monoanion clusters in the SSE; they can effectively lower or even halt the reduction kinetics at the interface by promoting on-site formation of interphases that are highly electron insulating. The study provides insight into the kinetic effects to achieve SSEs with superior properties in bulk and at the interface.

25 ENERGY STORAGE↗

X-ray and Synchrotron Diffraction Studies of 2-(Pyridin-2-yl)-1,10- Phenanthroline in the Role of Ligand for Two Copper Polymorphs or Hydrogen bonded with 2,2,6,6-Tetramethyl-4-oxopiperidinium Hexafluorophosphate

Different extended packing motifs of dichloro-[2-(pyridin-2-yl)-1,10-phenanthroline]copper(II), CuCl2 (C17H11N3Cl2) are obtained depending on the crystallization conditions. A triclinic form (I) is obtained from dimethylformamide-diethyl ether or methanol whereas crystallization from dimethylformamide-water yields a monoclinic form (II). In each case, the CuII center is in a 5-coordinate, distorted square-pyramidal geometry. The extended packing for both forms can be described as a highly-offset π stacking arrangement with interlayer distances of 3.674 (3) and 3.679 (3) Å for (I) and (II), respectively. The reaction of diprotonated Pt(tmpip2NCN)Cl (tmpip2NCN = 2,6-bis(2,2,6,6-tetramethylpiperidylmethyl)- benzyl) with AgPF6 under acidic conditions followed by the addition of 2-(pyridin-2-yl)-1,10-phenanthroline, results in a hydrogen bonded co-crystal, 2,2,6,6-tetramethyl-4-oxopiperidinium hexafluorophosphate- 2-(pyridin-2-yl)-1,10-phenanthroline (1/1),C9H18NO+.PF6-.C17H11N3.(III). The extended packing maximizes π-π interactions in a parallel, faceto-face arrangement with an interlayer stacking distance of 3.4960 (14) Å.

copper complexes↗

Residual stress analysis of multilayer environmental barrier coatings.

Silicon-based ceramics (SiC, Si{sub 3}N{sub 4}) are promising materials systems for high-temperature structural applications in gas turbine engines. However, the silica layer that forms on these materials is susceptible to attack from water vapor present in combustion environments. To protect against this degradation, environmental barrier coatings (EBCs) have been developed to shield the underlying substrate and prevent degradation. Here we report on elastic and thermal properties, as well as internal stresses of candidate multilayer coatings, as measured in situ using microfocused high-energy X-rays in a transmission diffraction geometry. Doped aluminosilicate coatings were investigated for their stability on a SiC/SiC melt-infiltrated substrate. The coatings consisted of a Ba{sub 1-x}Sr{sub x}Al{sub 2}Si{sub 2}O{sub 8} topcoat with a mullite or mullite+SrAl{sub 2}Si{sub 2}O{sub 8} interlayer, and a silicon bond coat. A numerical model was used to compare the stress results with an ideal coating system. Experiments were carried out on as-sprayed and heat-treated samples in order to analyze the strain and phase evolution as a function of multilayer depth and temperature. The phase transformation of the topcoat promoted healing of cracks in the EBC and reduced stresses in the underlying layers and the addition of SAS to the interlayer reduced stresses in thermally cycled coatings, but did not stop cracks from forming.

33 ADVANCED PROPULSION SYSTEMS↗

Formation and Dehydration Enthalpy of Potassium Hexaniobate

The formation energetics of hydrous and dehydrated potassium hexaniobates are investigated using high‐temperature oxide melt solution calorimetry. The enthalpies of formation of K 4 Nb 6 O 17 and K 4 Nb 6 O 17 ·3H 2 O from oxides are (−864.42 ± 10.63) and (−899.32 ± 11.48) kJ/mol, respectively. The formation enthalpy of K 4 Nb 6 O 17 from elements is (−7289.64 ± 12.50) kJ/mol, and of K 4 Nb 6 O 17 ·3H 2 O is (−8181.94 ± 13.24) kJ/mol. The enthalpy of dehydration (Δ H dehy ) for the reaction K 4 Nb 6 O 17 ·3H 2 O (xl, 25°C) = K 4 Nb 6 O 17 (xl, 25°C) + 3H 2 O (l, 25°C) is endothermic and is 34.60 ± 7.56 kJ/mol. The Δ H dehy per mole of water, 11.53 ± 2.52 kJ/mol, indicates the water molecules in K 4 Nb 6 O 17 ·3H 2 O are not just physically adsorbed, but loosely bonded in the K 4 Nb 6 O 17 phase, presumably in specific interlayer sites. The loss of this water near 100°C on heating is consistent with the weak bonding of water.

Sahu, Sulata K.↗