Search NASA⌕ Search

SEARCH · Search NASA

Results for “matrix completion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Thermal−Electrical Character of in Situ Synthesized Polyimide-Grafted Carbon Nanofiber Composites

Notwithstanding the success of polymer-carbon nanotube (CNT) nanocomposites, a solid understanding of the impact of external perturbations, including temperature and stress, on the electrical response, its reproducibility, and the subsequent relationship to the topology of the percolative morphology and molecular details of the CNT-CNT contact junction is not complete. Using an in situ synthesis approach, two series of polymide (CP2)-carbon nanofiber (CNF) composites are prepared with quantitatively (small-angle X-ray scattering) comparable CNF dispersions, but differing in the structure of the CNF-polymer interface. Amino-functionalized CNFs (FCNFs) enable direct formation of CP2 grafts onto the CNFs, whereas pristine CNFs (PCNFs) result in a relatively weak interface between the carbon nanofiber and CP2 matrix. In general, low-frequency ac impedance measurements are well described by the percolation bond model, yielding a percolation threshold below 1 vol % (0.24 and 0.68 vol % for PCNF-CP2 and FCNF-CP2, respectively). However, the design of the interface is determined to be crucial for controlling the electrical behavior in four substantial ways: magnitude of the limiting conductivity, linearity of the I-V response, magnitude and direction of temperature-dependent resistivity, and reproducibility of the absolute value of the resistivity with thermal cycling. These observations are consistent with a direct CNF-CNF contact limiting transport in the PCNF-CP2 system, where the CP2 grafts onto the FCNF from a dielectric layer, limiting transport within the FCNF-CP2 system. Furthermore, the grafted CP2 chains on the FCNF reduce local polymer dewetting at the CNF surfaces when the temperature exceeds the CP2 glass transition. This appears to stabilize the structure of the percolation network and associated conductivity. The general behavior of these interfacial extremes (pristine and fully functionalized CNFs) set important bounds on the design of interface modification for CNFs when the intended use is for electrical performance at elevated temperatures or under extreme current loads.

36 MATERIALS SCIENCE↗

Determining an unknown state of a high-dimensional quantum system with a single, factorized observable

One can uniquely identify an unknown state of a quantum system S by measuring a ''quorum'' consisting of a complete set of noncommuting observables. It is also possible to determine the quantum state by repeated measurements of a single and factorized observable, when the system S is coupled to an assistant system A whose initial state is known. This is because that the redistribution of the information about the unknown quantum state into the composite system A+S results in a one-to-one mapping between the unknown density matrix elements and the probabilities of the occurrence of the eigenvalues of a single, factorized observable of the composite system. Here we focus on quantum state tomography of high-dimensional quantum systems (e.g., a spin greater than 1/2) via a single observable. We determine the condition for the best determination and the upper bound to achieve the most robust measurements. From the experimental view we require a suitable interaction Hamiltonian to maximize the measure efficiency. For this we numerically investigate a three-level system. Moreover, the error analysis for the different-dimensional quantum states shows that the present measurement method is still very effective in determining an unknown state of a high-dimensional quantum system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Superallowed 0 + → 0 + nuclear β decays: 2020 critical survey, with implications for V ud and CKM unitarity

A new critical survey of all half-life, decay-energy and branching-ratio measurements related to 23 superallowed 0 + → 0 + β decays is presented. Included are 222 individual measurements of comparable precision obtained from 174 published references. Compared with our last survey in 2015, we have added results from 28 new publications and eliminated an approximately equal number whose results have been superseded by much more precise modern data. We obtain world-average ft values for each of the 21 transitions that have a complete set of data, then apply radiative and isospin-symmetry-breaking corrections to extract “corrected” Ft values. Fifteen of these Ft values now have a precision of 0.3% or better and all take the same value within statistics, as expected from conservation of the vector current. Their average, Ft¯, when combined with the muon lifetime, yields the up-down quark-mixing element of the Cabibbo-Kobayashi-Maskawa matrix, V ud = 0.97373 ± 0.00031. This is lower than our 2015 result by one standard deviation and its uncertainty is increased by 50%. This is a consequence, not of any shifts in the experimental data, but of new calculations for the radiative corrections. The lower V ud value now leads to greater tension in the top-row test of unitarity in the CKM matrix. Updates in experimental data have independently led to a factor-of-two tighter limit being set on the possible existence of a scalar interaction. In conclusion, the new limit on Fierz interference is b F ≤ 0.0033 at the 90% confidence level.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

AGR-3/4 Irradiation Test Train Disassembly and Component Metrology First Look Report

The AGR-3/4 experiment was designed to study fission product transport within graphitic matrix material and nuclear-grade graphite. To this end, this experiment consisted of 12 capsules, each fueled with 4 compacts containing UCO TRISO particles as driver fuel and 20 UCO designed-to-fail (DTF) fuel particles in each compact. The DTF fuel was fabricated with a thin pyrocarbon layer which was intended to fail during irradiation and provide a source of fission products. These fission products could then migrate through the compact and into the surrounding concentric rings of graphitic matrix material and/or nuclear graphite. Through post-irradiation examination (PIE) of the rings (including physical sampling and gamma scanning) fission product concentration profiles within the rings can be determined. These data can be used to elucidate fission product transport parameters (e.g. diffusion coefficients within the test materials) which will be used to inform and refine models of fission product transport. After irradiation in the Advanced Test Reactor (ATR) had been completed in April 2014, the AGR-3/4 experiment was shipped to the Hot Fuel Examination Facility (HFEF) at the Materials and Fuels Complex (MFC) for inspection, disassembly, and metrology. The AGR-3/4 test train was received at MFC in two separate shipments between February and April 2015. Visual examinations of the test train exterior did not indicate dimensional distortion, and only two small discolored areas were observed at the bottom of Capsules 8 and 9. No corresponding discoloration was found on the inside of these capsules, however. Prior to disassembly, the two test train sections were subject to analysis via the Precision Gamma Scanner (PGS), which did not indicate that any gross fuel relocation had occurred. A series of specialized tools (including clamps, cutters, and drills) had been designed and fabricated in order to carry out test train disassembly and recovery of capsule components (graphite rings and fuel compacts). This equipment performed well for separating each capsule in the test train and extracting the capsule components. Only a few problems were encountered. In one case, the outermost ring (the sink ring) was cracked during removal of the capsule through tubes. Although the sink ring will be analyzed in order to obtain a mass balance of fission products in the experiment, these cracks do not pose a major concern because the sink ring will not be analyzed in detail to obtain the spatial distribution of fission products. In Capsules 4 and 5, the compacts could not be removed from the inner rings. Strategies for removing the compacts are being evaluated. Sampling the inner rings with the compacts in-place is also an option. Dimensional measurements were made on the compacts, inner rings, outer rings, and sink rings. The diameters of all compacts decreased by 0.5 to 2.0 %. Generally, the extent of diametric shrinkage increased linearly with increasing neutron fluence. Most compact lengths also decreased. Compact lengths decreased with increasing fluence, reaching maximum shrinkage of about 0.9 % at a fast fluence of 4.0x10 25 n/m 2 E > 0.18 MeV. Above this fluence, the extent of length shrinkage appeared to decrease with fluence, and two compacts from Capsule 7 were found to have slightly increased in length (< 0.1 %) after a fluence of 5.2x10 25 n/m 2 .

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Apollo 15 rake sample microbreccias and non-mare rocks: Bulk rock, mineral and glass electron microprobe analyses

Quantitative electron microprobe data of Apollo 15 nonmare rake samples are presented. Bulk analyses of lithic fragments in the nomare rocks (expressed in oxide weight-percent) and the corresponding CIPW molecular norms are given. The mineralogy of the rocks and lithic fragments are also given; structural formulae for complete analyses and molecular end-members for all mineral analyses are included. The mineral analyses include pyroxene, olivine, plagioclase, barian K-feldspar, spinel and ilmenite, cobaltian metallic nickel-iron as well as SiO2-K2O-rich residual glass. Electron micropobe analyses (oxide weight percent) of glasses in loose fines and microbreccia samples and their CIPW molecular norms are presented along with electron microprobe data on bulk, mineral, and matrix glass from chondrules.

Hlava, P. F.↗

Oscillator strengths and transition probabilities for allowed and forbidden transitions in Fe XIX

An extensive set of oscillator strengths, line strengths, and radiative decay rates for the allowed and forbidden transitions in Fe XIX is presented. They correspond to 1626 fine structure levels of total angular momenta 0{<=}J{<=}8 of even and odd parities with 2{<=}n{<=}10, 0{<=}l{<=}9, 0{<=}L{<=}10, and (2S+1)=1, 3, 5. In contrast, the compiled table of the National Institute for Standards and Technology (NIST) lists only 63 observed levels. A total of 289,291 electric dipole allowed transitions are presented. They were obtained in the close coupling approximation using the relativistic Breit-Pauli R-matrix method. The wavefunction expansion included 15 levels of the configurations 2s{sup 2}2p{sup 3}, 2s2p{sup 4}, and 2p{sup 5} of the Fe XX core. The calculated fine structure levels are assigned with spectroscopic identifications using quantum defect analysis. Comparison with the observed energies shows very good agreement, the largest difference being less than 4%. The transitions also compare well with the compiled data by NIST and recent calculations. The forbidden transitions of the electric quadrupole and octupole, and magnetic dipole and quadrupole, type are presented for the 379 levels of the configurations 2s{sup 2}2p{sup 4}, 2s2p{sup 5}, 2p{sup 6}, 2s{sup 2}2p{sup 3}3s, 2s{sup 2}2p{sup 3}3p, 2s{sup 2}2p{sup 3}3d, 2s{sup 2}2p{sup 3}4s, 2s{sup 2}2p{sup 3}4p, 2s{sup 2}2p{sup 3}4d, 2s{sup 2}2p{sup 3}4f, 2s2p{sup 4}3s, 2s2p{sup 4}3p, 2s2p{sup 4}3d, 2s2p{sup 4}4s, 2s2p{sup 4}4p, and 2s{sup 2}2p{sup 2}3s{sup 2} of Fe XIX. They correspond to a total of 66,619 transitions. These results have been obtained from relativistic Breit-Pauli atomic structure calculations using the program SUPERSTRUCTURE. The forbidden transition probabilities show very good agreement with those compiled by NIST. - Highlights: {yields} Presents the most complete (n up to 10) set of transitions for Fe XIX. {yields} Considers both allowed and forbidden transitions. {yields} Large number of new energy levels are found. {yields} Benchmarks existing accurate energies and transitions. {yields} Completeness and accuracy are crucial to solve its abundance in the Sun.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Leptogenesis with heavy neutrino flavours: from density matrix to Boltzmann equations

Leptogenesis with heavy neutrino flavours is discussed within a density matrix formalism. We write the density matrix equation, describing the generation of the matter-antimatter asymmetry, for an arbitrary choice of the right-handed (RH) neutrino masses. For hierarchical RH neutrino masses lying in the fully flavoured regimes, this reduces to multiple-stage Boltzmann equations. In this case we recover and extend results previously derived within a quantum state collapse description. We confirm the generic existence of phantom terms. However, taking into account the effect of gauge interactions, we show that they are washed out at the production with a wash-out rate that is halved compared to that one acting on the total asymmetry. In the N{sub 1}-dominated scenario they cancel without contributing to the final baryon asymmetry. In other scenarios they do not in general and they have to be taken into account. We also confirm that there is a (orthogonal) component in the asymmetry produced by the heavier RH neutrinos which completely escapes the washout from the lighter RH neutrinos and show that phantom terms additionally contribute to it. The other (parallel) component is washed out with the usual exponential factor, even for weak washout. Finally, as an illustration, we study the two RH neutrino model in the light of the above findings, showing that phantom terms can contribute to the final asymmetry also in this case.

79 ASTRONOMY AND ASTROPHYSICS↗

A greedy algorithm for computing eigenvalues of a symmetric matrix with localized eigenvectors

Here, we present a greedy algorithm for computing selected eigenpairs of a large sparse matrix $H$ that can exploit localization features of the eigenvector. When the eigenvector to be computed is localized, meaning only a small number of its components have large magnitudes, the proposed algorithm identifies the location of these components in a greedy manner, and obtains approximations to the desired eigenpairs of $H$ by computing eigenpairs of a submatrix extracted from the corresponding rows and columns of $H$. Even when the eigenvector is not completely localized, the approximate eigenvectors obtained by the greedy algorithm can be used as good starting guesses to accelerate the convergence of an iterative eigensolver applied to $H$. We discuss a few possibilities for selecting important rows and columns of $H$ and techniques for constructing good initial guesses for an iterative eigensolver using the approximate eigenvectors returned from the greedy algorithm. We demonstrate the effectiveness of this approach with examples from nuclear quantum many-body calculations and many-body localization studies of quantum spin chains.

97 MATHEMATICS AND COMPUTING↗

CD14{sup +} monocytes promote the immunosuppressive effect of human umbilical cord matrix stem cells

Here, the effect of CD14{sup +} monocytes on human umbilical cord matrix stem cell (hUC-MSC)-mediated immunosuppression was studied in vitro. hUC-MSCs exerted a potent inhibitory effect on the proliferation and interferon-{gamma} (IFN-{gamma}) secretion capacities of CD4{sup +} and CD8{sup +} T cells in response to anti-CD3/CD28 stimulation. Transwell co-culture system revealed that the suppressive effect was primarily mediated by soluble factors. Addition of prostaglandin synthesis inhibitors (indomethacin or NS-398) almost completely abrogated the immunosuppression activity of hUC-MSCs, identifying prostaglandin E{sub 2} (PGE{sub 2}) as an important soluble mediator. CD14{sup +} monocytes were found to be able to enhance significantly the immunosuppressive effect of hUC-MSCs in a dose-dependent fashion. Moreover, the inflammatory cytokine IL-1{beta}, either exogenously added or produced by CD14{sup +} monocytes in culture, could trigger expression of high levels of PGE{sub 2} by hUC-MSCs, whereas inclusion of the IL-1 receptor antagonist (IL-1RA) in the culture down-regulated not only PGE{sub 2} expression, but also reversed the promotional effect of CD14{sup +} monocytes and partially restored CD4{sup +} and CD8{sup +} T cell proliferation and IFN-{gamma} secretion. Our data demonstrate an important role of monocytes in the hUC-MSC-induced immunomodulation, which may have important implications in future efforts to explore the clinical potentials of hUC-MSCs.

60 APPLIED LIFE SCIENCES↗

Solving quasi-free and quadratic Lindblad master equations for open fermionic and bosonic systems

The dynamics of Markovian open quantum systems are described by Lindblad master equations. For fermionic and bosonic systems that are quasi-free, i.e. with Hamiltonians that are quadratic in the ladder operators and Lindblad operators that are linear in the ladder operators, we derive the equation of motion for the covariance matrix. This determines the evolution of Gaussian initial states and the steady states, which are also Gaussian. Using ladder super-operators (a.k.a. third quantization), here we show how the Liouvillian can be transformed to a many-body Jordan normal form which also reveals the full many-body spectrum. Extending previous work by Prosen and Seligman, we treat fermionic and bosonic systems on equal footing with Majorana operators, shorten and complete some derivations, also address the odd-parity sector for fermions, give a criterion for the existence of bosonic steady states, cover non-diagonalizable Liouvillians also for bosons, and include quadratic systems. In extension of the quasi-free open systems, quadratic open systems comprise additional Hermitian Lindblad operators that are quadratic in the ladder operators. While Gaussian states may then evolve into non-Gaussian states, the Liouvillian can still be transformed to a useful block-triangular form, and the equations of motion for k-point Green’s functions form a closed hierarchy. Based on this formalism, results on criticality and dissipative phase transitions in such models are discussed in a companion paper.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Shear-Induced Anisotropy of Concentrated Multi-walled Carbon Nanotube Suspensions Using X-ray Scattering

X-ray scattering is used to measure particle orientation in concentrated multiwalled carbon nanotube (MWNT) suspensions under shear flow. MWNTs were dispersed in a Newtonian suspending fluid (uncured epoxy). The dispersions exhibit shear thinning, approaching the matrix viscosity at high shear rates. This is accompanied by progressive development of MWNT orientation along the flow direction with increasing shear rate. The impact of MWNT aspect ratio and concentration on steady-state orientation is explored. In one sample (2 wt. % dispersion of short MWNTs), orientation was measured in both the flow-gradient (1-2) and flow-vorticity (1-3) planes of shear flow to provide a more complete picture of the three-dimensional orientation state. Also in this sample, 1-3 plane measurements were conducted using both small- and wide-angle x-ray scattering (SAXS and WAXS). While the two methods produce qualitatively similar results, WAXS-derived measures of flow-induced anisotropy are consistently larger than SAXS data. In transient measurements following step-down in shear rate, MWNT orientation is found to decrease on similar time scales as viscosity increases. Prolonged growth of storage modulus is observed following flow cessation, accompanied by an unexpectedly rapid partial loss of MWNT orientation. The rheological and orientation data are discussed in terms of distortion, breakdown, and reformation of percolated MWNT networks in these samples.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Compact Process Development at Babcock & Wilcox

Multiple process approaches have been used historically to manufacture cylindrical nuclear fuel compacts. Scale-up of fuel compacting was required for the Next Generation Nuclear Plant (NGNP) project to achieve an economically viable automated production process capable of providing a minimum of 10 compacts/minute with high production yields. In addition, the scale-up effort was required to achieve matrix density equivalent to baseline historical production processes, and allow compacting at fuel packing fractions up to 46% by volume. The scale-up approach of jet milling, fluid-bed overcoating, and hot-press compacting adopted in the U.S. Advanced Gas Reactor (AGR) Fuel Development Program involves significant paradigm shifts to capitalize on distinct advantages in simplicity, yield, and elimination of mixed waste. A series of compaction trials have been completed to optimize compaction conditions of time, temperature, and forming pressure using natural uranium oxycarbide (NUCO) fuel at packing fractions exceeding 46% by volume. Results from these trials are included. The scale-up effort is nearing completion with the process installed and operable using nuclear fuel materials. Final process testing is in progress to certify the process for manufacture of qualification test fuel compacts in 2012.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Design of a vehicle based system to prevent ozone loss

This project is designed to be completed over a three year period. Overall project goals are: (1) to understand the processes that contribute to stratospheric ozone loss; (2) to determine the best scheme to prevent ozone loss; and (3) to design a vehicle based system to carry out the prevention scheme. The 1993/1994 design objectives included: (1) to review the results of the 1992/1993 design team, including a reevaluation of the key assumptions used; (2) to develop a matrix of baseline vehicle concepts as candidates for the delivery vehicle; and (3) to develop a selection criteria and perform quantitative trade studies to use in the selection of the specific vehicle concept.

Talbot, Matthew D.↗

Compaction Scale Up and Optimization of Cylindrical Fuel Compacts for the Next Generation Nuclear Plant

Multiple process approaches have been used historically to manufacture cylindrical nuclear fuel compacts. Scale-up of fuel compacting was required for the Next Generation Nuclear Plant (NGNP) project to achieve an economically viable automated production process capable of providing a minimum of 10 compacts/minute with high production yields. In addition, the scale-up effort was required to achieve matrix density equivalent to baseline historical production processes, and allow compacting at fuel packing fractions up to 46% by volume. The scale-up approach of jet milling, fluid-bed overcoating, and hot-press compacting adopted in the U.S. Advanced Gas Reactor (AGR) Fuel Development Program involves significant paradigm shifts to capitalize on distinct advantages in simplicity, yield, and elimination of mixed waste. A series of designed experiments have been completed to optimize compaction conditions of time, temperature, and forming pressure using natural uranium oxycarbide (NUCO) fuel. Results from these experiments are included. The scale-up effort is nearing completion with the process installed and operational using nuclear fuel materials. The process is being certified for manufacture of qualification test fuel compacts for the AGR-5/6/7 experiment at the Advanced Test Reactor (ATR) at the Idaho National Laboratory (INL).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Linear and Nonlinear Solvers for Simulating Multiphase Flow within Large-Scale Engineered Subsurface Systems

Simulation of multiphase flow in the subsurface is well-known to be computationally challenging. While there have been many studies that have explored approaches to overcoming these challenges, they often utilize relatively simple case studies. In this paper, we focus on the unique numerical challenges posed by modeling large-scale engineered subsurface systems, characterized by discrete features embedded in a heterogeneous natural subsurface setting. The man-made features such as shafts, tunnels, and barriers often cause multiple challenges in modeling the domain for multiphase porous media flow. This flow scenario can have a wide range of applications such as nuclear waste repositories, enhanced recovery of a petroleum reservoir, geothermal engineering, and carbon sequestration. An example of these severe numerical challenges is the case of performance assessment (PA) for Waste Isolation Pilot Plant (WIPP), the only operating deep geological repository in the US, which simulates extreme material properties of bedded salt rock formation and extreme contrast due to open excavation next to the formation. The models have extremes not only of permeability and porosity but also of the constitutive models needed for multiphase flow; additionally, they have process models like salt creep closure reducing porosity over time, fracturing in clay and anhydrite interbeds of the bedded salt, gas generation from the waste materials, and unintentional human borehole intrusions in some scenarios. Numerical simulations require the solution of coupled systems of nonlinear PDEs; in our work, we use the open-source simulator PFLOTRAN which is based on Finite Volume discretization. The solution of the nonlinear equations requires use of the Newton-Raphson iteration at each time step, which entails the solution of the linearized Jacobian system at each iteration. The effects of all the processes (i.e., large number of unknowns, highly nonlinear constitutive relations, large contrasts in material properties in short distances) lead to an ill-conditioned Jacobian matrix that severely challenges traditional linear solver, i.e., stabilized biconjugate gradient with block Jacobi incomplete LU preconditioner (BCGS-ILU) leading to non-convergence for traditional Newton-Raphson nonlinear solver causing unacceptably long computation time for each model. This paper presents linear solvers such as constrained pressure residual (CPR) two-stage preconditioner with alternate-block-factorization (ABF) and quasi- implicit pressure and explicit saturation (QIMPES) decouplers and flexible generalized residual solver (FGMRES). The new general-purpose nonlinear solver, Newton trust-region dogleg Cauchy (NTRDC), is also introduced to resolve extreme nonlinearities in the models. We demonstrate the effectiveness of each method relative to the default BCGS-Newton solver. The two best cases had nearly 50 times speed-up and achieved completion of a simulation in 14 hours that never completed due to non-convergence with the default solver. We also investigate the strong scalability of each method and discuss some of the deficiencies found for Block Jacobi preconditioner using parallel domain decomposition, and node packing effects of modern processor architecture.

Preconditioner, Nonlinear, Porous media, Multiphas↗

The polybasic region is not essential for membrane binding of the matrix protein M1 of influenza virus

The matrix protein M1, the organizer of assembly of influenza virus, interacts with other virus components and with cellular membranes. It has been proposed that M1 binding to lipids is mediated by its polybasic region, but this could hitherto not been investigated in vivo since M1 accumulates in the nucleus of transfected cells. We have equipped M1 with nuclear export signals and showed that the constructs are bound to cellular membranes. Exchange of the complete polybasic region and of further hydrophobic amino acids in its vicinity did not prevent association of M1 with membranes. We therefore suppose that M1 probably interacts with membranes via multiple binding sites.

60 APPLIED LIFE SCIENCES↗

POLARIZED PARTIAL FREQUENCY REDISTRIBUTION IN SUBORDINATE LINES. II. SOLUTION OF THE TRANSFER EQUATION WITH RAYLEIGH SCATTERING

It is quite common in line formation theory to treat scattering in subordinate lines under the assumption of complete frequency redistribution (CRD). The partial frequency redistribution (PRD) in subordinate lines cannot always be approximated by CRD, especially when the polarization state of the line radiation is taken into account. Here we investigate the PRD effects in subordinate lines including scattering polarization. The line formation is described by a polarized non-LTE line transfer equation based on a two-level atom model. We use the recently derived subordinate line redistribution matrix. We devise polarized approximate lambda iteration methods to solve the concerned transfer problem. The linear polarization profiles of subordinate lines formed in non-magnetic (Rayleigh) scattering atmospheres are discussed. We consider one-dimensional isothermal planar model atmospheres. We show that in the polarized line transfer calculations of subordinate lines, PRD plays as important of a role as it does in the case of resonance lines. We also study the effect of collisions on linear polarization profiles of subordinate lines.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Inverse transport problem solvers based on regularized and compressive sensing techniques

According to the direct exposure measurements from flash radiographic image, regularized-based method and compressive sensing (CS)-based method for inverse transport equation are presented. The linear absorption coefficients and interface locations of objects are reconstructed directly at the same time. With a large number of measurements, least-square method is utilized to complete the reconstruction. Owing to the ill-posedness of the inverse problems, regularized algorithm is employed. Tikhonov method is applied with an appropriate posterior regularization parameter to get a meaningful solution. However, it's always very costly to obtain enough measurements. With limited measurements, CS sparse reconstruction technique Orthogonal Matching Pursuit (OMP) is applied to obtain the sparse coefficients by solving an optimization problem. This paper constructs and takes the forward projection matrix rather than Gauss matrix as measurement matrix. In the CS-based algorithm, Fourier expansion and wavelet expansion are adopted to convert an underdetermined system to a well-posed system. Simulations and numerical results of regularized method with appropriate regularization parameter and that of CS-based agree well with the reference value, furthermore, both methods avoid amplifying the noise. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗