Search NASA⌕ Search

SEARCH · Search NASA

Results for “parameter optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Determining local thermal transport in a composite uranium-nitride/silicide nuclear fuel using square-pulse transient thermoreflectance technique

Laser-based techniques have become an appealing option for determining the thermal diffusivities (D) and conductivities (k) of nuclear materials that would otherwise prove too hazardous or difficult to measure otherwise. These techniques have enabled non-destructive and non-contact thermal transport measurements with micron-level spatial resolution. In this study, a new time-domain technique known as square-wave pulse thermoreflectance (SPTR) is described and used to determine D values of both uranium sesquisilicide (U 3 Si 2 ) and uranium nitride (UN) phases in a composite fuel. An extensive sensitivity analysis was conducted that identified the optimal measurement parameters of standard materials with a range of thermal transport properties comparable to those of various fuel types. The standards were measured using both SPTR as well as a spatial-domain thermoreflectance technique (SDTR). Several U 3 Si 2 and UN phase regions of polished UN/U 3 Si 2 (70/30 vol.%) samples were measured using both methods, and the resulting calculated D and k values are reported, with both techniques showing excellent agreement between samples. Finally, the ability to use the technique for local diffusivity mapping was demonstrated over a multiphase region, and could be used to determine thermal transport properties in precipitates, secondary phases, and irradiation-damaged regions of post-irradiated fuel samples.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Pyrolysis of high-density polyethylene: Degradation behaviors, kinetics, and product characteristics

Pyrolysis is a promising technology for converting plastic waste into valuable raw materials while offering a potential solution to the global plastic pollution crisis. In this study, the thermal pyrolysis of high-density polyethylene (HDPE) is investigated in a drop tube reactor under nearly isothermal conditions. The impact of reaction temperature and gas/volatile residence time on carbon conversion and product distribution is examined across a range of 500–900°C and 3.6–32.2s, respectively. Non-condensable gas products detected by online mass spectrometry are H 2 , CH 4 , C 2 H 4 , C 2 H 6 , C 3 H 6 , and C 3 H 8 . At elevated temperatures and prolonged residence time, H 2 yield reaches as high as 8.6 wt% of the initial HDPE mass due to intensified cracking reactions of C 2 –C 3 hydrocarbons and long-chain aliphatic compounds. Consequently, pyrolysis tars consist mainly of polycyclic aromatic hydrocarbons (PAHs) with 5–7 rings, accompanied by visible coke deposition within the reactor. HDPE decomposition to volatiles is an endothermic process and it is complete at a temperature between 492°C and 525°C, depending on the heating rate employed, from non-isothermal thermogravimetric analysis and differential scanning calorimetry (TGA-DSC) measurements. The thermal degradation of HDPE pellets follows the two-dimensional nucleation growth model for conversion levels up to 0.8 with an apparent activation energy of 259–270 kJ/mol and a pre-exponential factor of 4.83 × 10 17 –1.37 × 10 19 min -1 , determined from various isoconversional methods such as Flynn-Wall-Ozawa (FWO), Kissinger-Akahira-Sunose (KAS), and Starink, along with Criado's master plots. Further, these findings provide valuable insights into optimizing process parameters and refining reactor design for pyrolysis, which can be integrated with gasification and reforming processes to enhance hydrogen production on a larger scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preparation and photocatalytic activity for water splitting of Pt-Na{sub 2}Ta{sub 2}O{sub 6} nanotube arrays

Na{sub 2}Ta{sub 2}O{sub 6} nanotube arrays were prepared by hydrothermal method from Ta{sub 2}O{sub 5} nanotube arrays, obtained by anodization of Ta foils, in Na{sub 2}CO{sub 3} solution at 150 Degree-Sign C. The as-synthesized samples were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), UV-vis diffuse reflectance spectra (UV-DRS) and X-ray photoelectron spectroscopy (XPS). Analysis results show that pyrochlore structure Na{sub 2}Ta{sub 2}O{sub 6} nanotube arrays have been successfully fabricated. The diameters and lengths of Na{sub 2}Ta{sub 2}O{sub 6} nanotube arrays are 50 nm and 4 {mu}m, respectively. The photocatalytic hydrogen production activities of the as-synthesized Na{sub 2}Ta{sub 2}O{sub 6} nanotube arrays are highly dependent on the hydrothermal reaction time and Na{sub 2}CO{sub 3} concentration, optimized reaction parameters are obtained. To further improve the photocatalytic activity for hydrogen evolution, Pt loaded Na{sub 2}Ta{sub 2}O{sub 6} nanotube arrays are prepared by photochemical reduction method. The Pt loaded samples exhibit much higher activity for hydrogen evolution than pure Na{sub 2}Ta{sub 2}O{sub 6} nanotube arrays. Moreover, the photocatalytic hydrogen properties are rather stable. - Graphical abstract: Na{sub 2}Ta{sub 2}O{sub 6} nanotube arrays were synthesized by hydrothermal method using Ta{sub 2}O{sub 5} nanotube arrays as a precursor. The loaded Pt enhances the photocatalytic activity for water splitting of Na{sub 2}Ta{sub 2}O{sub 6} nanotube arrays. Highlights: Black-Right-Pointing-Pointer Novel Na{sub 2}Ta{sub 2}O{sub 6} nanotube array films with pyrochlore structure were synthesized. Black-Right-Pointing-Pointer Na{sub 2}Ta{sub 2}O{sub 6} nanotube arrays are active for H{sub 2} evolution from aqueous CH{sub 3}OH solution. Black-Right-Pointing-Pointer The effect of hydrothermal conditions on photocatalytic activity was investigated. Black-Right-Pointing-Pointer Pt loading can improve the photocatalytic activities of Na{sub 2}Ta{sub 2}O{sub 6} nanotube arrays. Black-Right-Pointing-Pointer Photocatalytic mechanism is proposed based on the experimental results.

36 MATERIALS SCIENCE↗

Synthesis and application of different phthalocyanine molecular sieve catalyst for oxidative desulfurization

M{sub 2}(PcAN){sub 2} (M=Fe, Co, Ni, Cu, Zn and Mn) anchored onto W-HZSM-5 (M{sub 2}(PcAN){sub 2}–W-HZSM-5) or the M{sub 2}(PcTN){sub 2} doping W-HZSM-5 (M{sub 2}(PcTN){sub 2}/W-HZSM-5) were prepared and their catalytic performances were tested for oxidative desulfurization in the presence of oxygen. Thiophene (T), benzothiophene (BT), and dibenzothiophene (DBT) were considered as sulfur compounds. Among zeolite-based catalysts, the Cu{sub 2}(PcAN){sub 2}–W-HZSM-5 and Cu{sub 2}(PcTN){sub 2}/W-HZSM-5 showed superior desulfurization performance and the activity of selectivity followed the order: T>BT>DBT. The effects of phthalocyanine concentration were studied by UV–Vis and calcination temperature was obtained by TG-DSC for Cu{sub 2}(PcTN){sub 2}/W-HZSM-5. Catalysts were characterized by EA, IR, XRD, SEM, TEM, ICP, and N{sub 2} adsorption. Reaction time, temperature and the amount of catalyst were investigated as the important parameters for optimization of the reaction. Furthermore, a possible process of oxidative desulfurization and the reaction products were proposed. - Graphical abstract: The ODS reaction schematic shows the reaction mechanism of ultra-deep desulfurization. The sulfur compounds are oxidized to their corresponding sulfoxides or sulfones through the use of oxygen and catalysts. The reaction process of ultra-deep desulfurization. - Highlights: • A kind of novel catalyst for deep desulfurization was synthesized. • Cu{sub 2}(PcAN){sub 2}–W-HZSM-5 exhibits excellent catalytic performance for desulfurization. • The reaction conditions that affect desulfurization efficiency are investigated. • The reaction process of model sulfur compounds is proposed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Analysis of mechanical, thermodynamic, and thermoelectric properties of ferromagnetic SrFe{sub 4}As{sub 12} skutterudite

In the present work, the electronic, mechanical, thermal and thermoelectric properties of Sr-filled skutterudite have been investigated in the framework of density functional theory. SrFe{sub 4}As{sub 12} shows a ferromagnet character with a magnetic moment of 1.76 μ{sub B} at an optimized lattice parameter of 8.38 Å. The effect of high-pressures on thermodynamic properties viz. thermal expansion coefficient, specific heat capacity and Grüneisen parameter is also carried out by employing the quasi-harmonic Debye model. Temperature dependence of Seebeck coefficient, electrical conductivity, thermal conductivity, power factor, and figure of merit is observed up to 800 K. The lattice thermal conductivity decreases with temperature due to rattling behavior of the filler atom. SrFe{sub 4}As{sub 12} exhibits the high value of the figure of merit equal to 0.76 at 800 K. The present results clearly signify that SrFe{sub 4}As{sub 12} may be a good choice for thermoelectric applications due to its high-power factor and figure of merit.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of electrodeposited ZnTe layers as window materials in ZnTe/CdTe/CdHgTe multi-layer solar cells

Zinc telluride (ZnTe) thin films have been deposited on glass/conducting glass substrates using a low-cost electrodeposition method. The resulting films have been characterized using various techniques in order to optimize growth parameters. X-ray diffraction (XRD) has been used to identify the phases present in the films. Photoelectrochemical (PEC) cell and optical absorption measurements have been performed to determine the electrical conductivity type, and the bandgap of the layers, respectively. It has been confirmed by XRD measurement that the deposited layers mainly consist of ZnTe phases. The PEC measurements indicate that the ZnTe layers are p-type in electrical conduction and optical absorption measurements show that their bandgap is in the range 2.10-2.20 eV. p-Type ZnTe window materials have been used in CdTe based solar cell structures, following new designs of graded bandgap multi-layer solar cells. The structures of FTO/ZnTe/CdTe/metal and FTO/ZnTe/CdTe/CdHgTe/metal have been investigated. The results are presented in this paper using observed experimental data.

36 MATERIALS SCIENCE↗

Characterization of AZ31B wrought magnesium alloy joints welded by high power fiber laser

A 6 kW fiber laser is used to weld AZ31B wrought magnesium alloy and the characterization of welded joints are studied by the observations of bead size, microstructure and mechanical properties. The accepted joints without macro-defects can be obtained when the laser power is in the range of 2.5 to 4.0 kW. Typical hexagonal dendrites are observed in the fusion zone, whose average semi-axis length increases with increasing heat input or decreasing welding speed. The minimum ultimate tensile strength of welded joints reaches 227 MPa, 94.6% of the base metal. And when the heat input reduces to 48 J/mm or lower, the joints are fractured in the base metal, showing stronger failure strength compared to the base metal. For the joints ruptured in the weld metal, the fracture surface is characterized by a ductile-brittle mixed pattern consisting of both dimples and cleavages. Finally, the formation mechanism of pore in the welds is discussed and summarized by the pore morphologies on the fracture surface. - Highlights: {yields} Accepted joints of AZ31B Mg alloy are produced by high power fiber laser. {yields} Optimal welding parameters are summarized by experimental observations. {yields} Obvious hexagonal dendrites are observed in the fusion zone. {yields} The joints are stronger than base metal as the heat input is lower than 48 J/mm. {yields} Pore formation mechanism of welded joints is discussed and summarized.

36 MATERIALS SCIENCE↗

Microstructural, chemical and textural characterization of ZnO nanorods synthesized by aerosol assisted chemical vapor deposition

ZnO nanorods were synthesized by aerosol assisted chemical vapor deposition onto TiO{sub 2} covered borosilicate glass substrates. Deposition parameters were optimized and kept constant. Solely the effect of different nozzle velocities on the growth of ZnO nanorods was evaluated in order to develop a dense and uniform structure. The crystalline structure was characterized by conventional X-ray diffraction in grazing incidence and Bragg–Brentano configurations. In addition, two-dimensional grazing incidence synchrotron radiation diffraction was employed to determine the preferred growth direction of the nanorods. Morphology and growth characteristics analyzed by electron microscopy were correlated with diffraction outcomes. Chemical composition was established by X-ray photoelectron spectroscopy. X-ray diffraction results and X-ray photoelectron spectroscopy showed the presence of wurtzite ZnO and anatase TiO{sub 2} phases. Morphological changes noticed when the deposition velocity was lowered to the minimum, indicated the formation of relatively vertically oriented nanorods evenly distributed onto the TiO{sub 2} buffer film. By coupling two-dimensional X-ray diffraction and computational modeling with ANAELU it was proved that a successful texture determination was achieved and confirmed by scanning electron microscopy analysis. Texture analysis led to the conclusion of a preferred growth direction in [001] having a distribution width Ω = 20° ± 2°. - Highlights: • Uniform and pure single-crystal ZnO nanorods were obtained by AACVD technique. • Longitudinal and transversal axis parallel to the [001] and [110] directions, respectively. • Texture was determined by 2D synchrotron diffraction and electron microscopy analysis. • Nanorods have its [001] direction distributed close to the normal of the substrate. • Angular spread about the preferred orientation is 20° ± 2°.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Direct sensitivity analysis on the parameterization of crystal plasticity models

Various methods for calibrating crystal plasticity finite element (CPFE) models lead to non-unique input parameter values, which subsequently introduce uncertainty in the predicted mechanical response. Sensitivity analysis (SA) conducted on crystal plasticity models is used to identify how variability in these parameters contribute to output uncertainty. Traditional SA on CPFE parameters uses simplified surrogate models to save computational time. However, the accuracy of the surrogate models depends on the quantity of training data used, and any modeling error can propagate into the SA results, potentially affecting their reliability. In this work, the elementary effects test (EET) method, a global SA technique using direct CPFE simulations was employed, and the results obtained were compared with the First Order Second Moment (FOSM) method. ExaConstit, an open-source GPU-enabled CPFE code, was used to perform the simulations and direct SA. The EET method was accurately able to capture the non-linear effects of all the input parameters on the output and is a valuable approach for reliably attributing parameter sensitivities in CPFE models. Based on the results, efficient strategies to perform future parameter calibration and SA are discussed. Additionally, the SA trends observed in different single crystal orientations closely mirrored the activity of the slip systems.

Elementary Effects Test↗

Transformation of c-oriented nanowall network to a flat morphology in GaN films on c-plane sapphire

Highlights: {yields} High quality wurtzite structures GaN nanowall network formed on c-plane sapphire. {yields} Tapering of nanowalls at the apex cause electron confinement effects. {yields} Temperature dependent transformation of the six fold nanowall network to a flat morphology. {yields} Growth kinetics is influenced by adatom diffusion, interactions and bonding for GaN layer. -- Abstract: The work significantly optimizes growth parameters for nanostructured and flat GaN film in the 480-830 {sup o}C temperature range. The growth of ordered, high quality GaN nanowall hexagonal honeycomb like network on c-plane sapphire under nitrogen rich (N/Ga ratio of 100) conditions at temperatures below 700 {sup o}C is demonstrated. The walls are c-oriented wurtzite structures 200 nm wide at base and taper to 10 nm at apex, manifesting electron confinement effects to tune optoelectronic properties. For substrate temperatures above 700 {sup o}C the nanowalls thicken to a flat morphology with a dislocation density of 10{sup 10}/cm{sup 2}. The role of misfit dislocations in the GaN overlayer evolution is discussed in terms of growth kinetics being influenced by adatom diffusion, interactions and bonding at different temperatures. The GaN films are characterized by reflection high energy electron diffraction (RHEED), field emission scanning electron (FESEM), high resolution X-ray diffraction (HRXRD) and cathodoluminescence (CL).

36 MATERIALS SCIENCE↗

Preparation of aluminum hydroxide and oxide nanostructures with controllable morphology by wet oxidation of AlN/Al nanoparticles

Highlights: • Aluminum hydroxide nanoparticles were synthesized by wet oxidation methods. • The oxidation conditions of AlN/Al affect the morphologies of the reaction products. • No changes in the synthesized materials morphology occurred up to 1000 °C. • The maxima specific surface areas for the nanostructures were achieved at 500 °C. - Abstract: A simple and environmentally friendly method to prepare aluminum oxyhydroxide and trihydroxide nanostructures by wet oxidation of AlN/Al composite nanoparticles was developed. The AlN/Al nanoparticles used were produced by electrical explosion of an aluminum wire in nitrogen atmosphere. The obtained nanostructures were characterized employing X-ray diffraction (XRD), transmission and high-resolution scanning electron microscopy (TEM and HRSEM), thermogravimetric analysis (TGA) and N{sub 2} adsorption-desorption technique (BET). By changing the wet oxidation conditions, aluminum hydroxides with different phase composition, morphology and texture characteristics were synthesized. After calcination at different temperatures, a range of transition and stable alumina nanostructures were obtained that preserved the morphology of the aluminum hydroxide precursors - agglomerated nanosheets, nanoplates or hexagonal nanorods, up to 1000 °C. Optimal process parameters for maximum surface area development for all the precursor materials have been established.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Multiwalled carbon nanotubes in titania based nanocomposite as trap for photoexcitons for enhanced photocatalytic hydrogen production under solar light irradiation

Highlights: • Facile synthesis of FCNTs-TiO{sub 2} composite through wet impregnation method. • Parameters were optimized for enhanced photocatalytic hydrogen production under sunlight irradiation. • At optimal conditions nanocomposite showed 8 folds higher hydrogen efficiency than pristine TiO{sub 2}. • Functionalized carbon nanotubes acts as cocatalyst in this study. - Abstract: The impact of functionalized multiwalled carbon nanotubes in titania based nanocomposite for photocatalytic hydrogen production was investigated. Founctionalization experiments were carried out to remove amorphous carbon atttached to carbon nanotubes by strong acid treatment followed by calcination at desired temperature and time intervals. Materials characterization revealed that anatase TiO{sub 2} nanoparticles randomly dispersed onto the walls of one dimensional multiwalled carbon nanotubes with surface hydroxyl and carbonyl groups besides significant change in optical absorption. Photocatalytic activity was performed in aqueous glycerol solution under solar light and volume of hydrogen production was quantified using gas chromatography. Highest hydrogen production rate of 13,107 μmol·h{sup −1}·g{sup −1} of catalyst was recorded under optimized conditions due to cocatalyst role of functionalized carbon nanotubes. Here, photo electrons were trapped by carbon nanotubes for continuous hydrogen production through reduction reaction.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of MLC Leaf Width and PTV Margin on the Treatment Planning of Intensity-Modulated Stereotactic Radiosurgery (IMSRS) or Radiotherapy (IMSRT)

We studied the effect of MLC (multileaf collimator) leaf width and PTV (planning target volume) margin on treatment planning of intensity modulated stereotactic radiosurgery (IMSRS) or radiotherapy (IMSRT). Twelve patients previously treated with IMSRS/IMSRT were retrospectively planned with 5- and 3-mm MLC leaf widths and 3- and 2-mm PTV margins using the already contoured clinical target volume and critical structures. The same beam arrangement, planning parameters, and optimization method were used in each of the 4 plans for a given patient. Each plan was normalized so that the prescription dose covered at least 99% of the PTV. Plan indices - D{sub mean} (mean dose), conformity index (CI), V{sub 70} (volume receiving {>=} 70% of the prescription dose), and V{sub 50} (volume receiving {>=} 50% of the prescription dose) - were calculated from the dose-volume histograms (DVHs) of the PTV, normal tissue, and organs at risk (OARs). Hypothesis testing was performed on the mean ratios of plan indices to determine the statistical significance of the relative differences. The PTV was well covered for all plans, as no significant differences were observed for D{sub 95}, V{sub 95}, D{sub max}, D{sub min}, and D{sub mean} of the PTV. The irradiated volume was {approx}23% smaller when 2-mm instead of 3-mm PTV margin was used, but it was only reduced by {approx}6% when the MLC leaf width was reduced from 5 mm to 3 mm. For normal tissue and brainstem, V{sub 70}, V{sub 50}, and D{sub mean} were reduced more effectively by a decrease in MLC width, while D{sub mean} of optic nerve and chiasm were more sensitive to a change in PTV margin. The DVH statistics for the PTV and normal structures from the treatment plan with 5-mm MLC and 2-mm PTV margin were equal to those with 3-mm MLC and 3-mm PTV margin. PTV margin reduction is more effective in sparing the normal tissue and OARs than a reduction in MLC leaf width. For IMSRS, where highly accurate setup and small PTV margins are routinely employed, the use of 5-mm MLC is therefore less desirable.

61 RADIATION PROTECTION AND DOSIMETRY↗

Thermodynamic properties of ZrCl 4 with LiCl, NaCl, KCl, CsCl, MgCl 2 , and UCl 3 for molten salt reactor applications

Here, a set of self-consistent Gibbs energy functions has been developed to describe the thermochemical behavior of the major reactive fission product ZrCl 4 with key components in chloride molten salt reactors (MSRs): LiCl–ZrCl 4 , NaCl–ZrCl 4 , KCl–ZrCl 4 , CsCl–ZrCl 4 , MgCl 2 –ZrCl 4 and UCl 3 –ZrCl 4 . Low ZrCl 4 concentration phase equilibria most relevant to MSR applications have been confirmed via differential scanning calorimetry for NaCl–ZrCl 4 , and X-ray diffraction analysis performed on equilibrated samples of NaCl–ZrCl 4 , KCl–ZrCl 4 , MgCl 2 –ZrCl 4 , and UCl 3 –ZrCl 4 . Within the framework of the modified quasi-chemical model in the quadruplet approximation, extrapolations of pseudo-binary models were generated to represent KCl–MgCl 2 –ZrCl 4 , KCl–NaCl–ZrCl 4 , and MgCl 2 –NaCl–ZrCl 4 , which show agreement with phase equilibria data where available without the use of ternary interaction parameters. The optimized thermodynamic descriptions for these systems and others are available in the open-source compendium Molten Salt Thermal Properties Database – Thermochemical (MSTDB–TC).

CALPHAD↗

Laser powder bed fusion of oxide dispersion-strengthened IN718 alloys: A complementary study on microstructure and mechanical properties

In this study, two new grades of oxide dispersion strengthened (ODS) Inconel 718 (IN718) alloys were designed by the thermochemical CALPHAD method and produced by laser powder bed fusion (LPBF) technique. Alloys designated as IN718-YF and IN718-YFH, that consist Y 2 O 3 –FeO and Y 2 O 3 –FeO–Hf, respectively, were fabricated with >99.9 % densification using optimized process parameters. CALPHAD calculations were highly consistent with experimental findings, highlighting the formation of Al-containing Y–Ti–O and Y–Hf–O nano-oxides in both alloy types. Texture analyzes revealed no significant texture development in as-built (AB) or heat-treated (HT) alloys. Heat treatment was applied at 1050 °C for 1 h to enhance nano-oxide density. Further, the nano-oxide number density remained similar in IN718-YF while it decreased in IN718-YFH alloy as a result of carbide formation after the heat treatment. Besides, formation of secondary γ' particles was observed in the IN718-YFH/HT alloy. Even though the yield strengths of IN718-YF and IN718-YFH alloys in both AB and HT conditions were similar, the ductility of IN718-YFH was ~50 % less in almost all conditions compared to the ductility of IN718-YF. This has been shown to be as a result of irregular shaped micron-sized Y-Hf-O oxides, martensite formation in AB condition, increased amount of carbides and existence of secondary γ' particles in HT condition in IN718-YFH. High density of stacking faults (SF) forming at the interface of the nano-oxides have been detected in IN718-YF alloys. Besides dislocation/nanoparticle interactions, SFs which are responsible for the delocalization of the deformation improve the ductility of IN718-YF alloys. Overall, high temperature mechanical tests exhibit that both alloys have higher strength with improved ductility compared to the standard IN718 alloys, indicating the contribution of the nano-oxides.

36 MATERIALS SCIENCE↗

Computational investigation of arranged scintillating particle composites for fast neutron detection

Composite materials have the potential to play an important role in enabling high-performance and cost-effective neutron detectors for fundamental science, global security, and dosimetry applications. This work presents neutron and gamma transport simulation results on composites consisting of 6 Li-containing GS20 scintillator glass particles arranged in an organic matrix. These composites achieve high sensitivity for neutrons while suppressing signals from gamma rays. The simulations successfully identified optimal composite parameters such as particle size, geometry, and inter-particle pitch. This information is key to the subsequent fabrication and scale-up of the desired GS20-in-acrylic composite. Finally, the simulation results presented in this paper demonstrate that arranged composites can provide high neutron detection efficiency with gamma misidentification values of <1 in 10 6 gamma rays, assuming irradiation with a 252 Cf spontaneous fission source.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The influence of thermochemistry on the reactivity of propane, the pentane isomers and $n$-heptane in the low temperature regime

In this study, the influence of thermochemistry on the reactivity of fuels at low temperatures (600–1000 K) is studied here. Specifically, the effect of different sets of thermochemistry on chemical model predictions is explored, where various sets are calculated at different levels of theory in addition to recently updated group additivity values. Experimentally measured ignition delay times for propane, the pentane isomers and n-heptane are simulated using NUIGMech1.2 and replacing the thermochemistry of the low-temperature species with the calculated values. For propane, three different thermochemistry sets were calculated, namely CCSD(T)-F12/TZ-F12//B2PLYP-D3/TZ//B2PLYP-D3/TZ (QM1), CCSD(T)-F12/TZ-F12//B2PLYP-D3/TZ//ωB97X-D/TZ (QM2) and B2PLYP-D3/TZ/ωB97X-D/6-31G*//ωB97X-D/6-31G* (QM3). The QM2 results provide parameters to optimize new group additivity (NGA) values which are used to calculate the fourth set of thermochemistry. The model predictions using these four sets are compared to those using NUIGMech1.2 for propane. As the QM1 and QM2 calculations are expensive, the thermochemistry calculated from the QM3 and NGA calculations are used in the pentane isomer and n-heptane models. For all of the models, it is found that the thermochemistry of the species involved in the low-temperature reaction sequence ($RH$, $\dot{R}$, $RO_2H$, $R\dot{O}_2$, $\dot{Q}OOH$ and $\dot{O}_2QOOH$ species) significantly affect fuel reactivity. The NGA values were developed based on all of these species except $\dot{O}_2QOOH$ radicals. The thermochemistry of $\dot{O}_2QOOH$ species cannot be accurately calculated with the NGA representations due to the importance of non-next-nearest neighbor interactions of –OOH substitution. Further development of the NGA method to capture such interactions is in progress. Overall, the model developed using the NGA thermochemistry shows better agreement with experimental data than the model using thermochemistry from affordable and prominent QM methods, such as QM3. Based on the results presented for propane, the pentane isomers and n-heptane, the thermochemistry calculated using the NGA method can be used to model the oxidation of higher order hydrocarbons at low temperatures.

33 ADVANCED PROPULSION SYSTEMS↗