Search NASA⌕ Search

SEARCH · Search NASA

Results for “reverse engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Recovery from plasma etching-induced nitrogen vacancies in p-type gallium nitride using UV/O 3 treatments

Plasma etching of p-type GaN creates n-type nitrogen vacancy (V N ) defects at the etched surface, which can be detrimental to device performance. In mesa isolated diodes, etch damage on the sidewalls degrades the ideality factor and leakage current. Here a treatment was developed to recover both the ideality factor and leakage current, which uses UV/O 3 treatment to oxidize the damaged layers followed by HF etching to remove them. The temperature dependent I–V measurement shows that the reverse leakage transport mechanism is dominated by Poole–Frenkel emission at room temperature through the etch-induced V N defect. Depth resolved cathodoluminescence confirms that the damage is limited to first several nanometers and is consistent with the V N defect.

42 ENGINEERING↗

High-voltage regrown nonpolar m -plane vertical p-n diodes: A step toward future selective-area-doped power switches

Here, we report high-voltage regrown nonpolar m-plane p-n diodes on freestanding GaN substrates. Secondary-ion mass spectroscopy (SIMS) measurements indicate O and Si spikes at the regrowth interfaces with maximum concentration ~ 5×10 17 cm -3 , which is similar to previously published c-plane studies. A high blocking voltage of 540 V at ~ 1 mA/cm2 (corresponding to an electric field of E ~ 3.35 MV/cm), turn-on voltages between 2.9-3.1 V, specific on-resistance of 1.7 mΩ.cm 2 at 300 A/cm 2 , and a minimum ideality factor of 1.7 were obtained for the regrown diodes. Our results suggest that Si, O and C interfacial impurity levels up to 2×10 17 cm -3 , 8×10 17 cm -3 , and 1×10 19 cm -3 , respectively, at the metallurgical junction of m-plane p-n diodes do not result in very early breakdown in the reverse bias, although the off-state leakage current in forward bias is affected. The impact of growth interruption/regrowth on diode performance is also investigated.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Differentiable Multiphysics Codes: A Breakthrough Technology for Simulation and Computing

This document summarizes the findings of a strategic planning exercise commissioned by the Weapons Simulation and Computing, Computational Physics (WSC/CP) program at the Lawrence Livermore National Laboratory (LLNL) in FY24. During the year, the committee met with multiple stakeholder communities to gather input, opinions, suggestions and concerns which have been incorporated throughout this document. The key findings from this exercise are summarized: • The development of multiphysics modelling and simulation (mod/sim) codes and software technologies, their deployment on exascale compute platforms, and their broad adoption across the NNSA is a major success of the Advanced Simulation and Computing (ASC) program and the Exascale Computing Project (ECP). Sustained investment in these core technologies is essential. • Today’s state of the art involves running ensembles of O(100K) simulations to perform uncertainty quantification (UQ) and design studies using multiple statistical methods such as Bayesian optimization to understand sensitivities of our models and explore parameterized design spaces. Even with exascale computing, we are practically limited to O(10) parameters in these studies since the number of simulations required to sample the space scales exponentially with the number of design parameters. • The data from these simulation ensembles is increasingly being used to train machine learned (ML) surrogates (or reduced order models, ROMs) which can then be used for optimization or real time design exploration. However, the trained surrogates are still limited in the number of parameters they can represent due to the sampling limitations previously noted. • Augmenting our suite of integrated multiphysics simulation codes, both current and emerging, with the ability to compute gradients (solution derivatives) of arbitrary simulation outputs with respect to (some or all) simulation inputs would be a breakthrough technology, opening the door to a new era of efficient and automated inverse design based on verified and validated mod/sim capabilities. • This capability, which we refer to as differentiable multiphysics codes (DMCs), would revolutionize both UQ and optimization studies by breaking the curse of dimensionality that presently limits our “gradient-free” ensemble based computing approach. A similar breakthrough occurred in the AI/ML community once the ability to compute gradients of arbitrary loss functions using back-propagation became commonplace. Gradient information from the multiphysics codes can also be used to dramatically improve the efficiency and scale of training of ML/ROM surrogates for rapid assessments. • Achieving this in our suite of codes will be a grand challenge, similar to the amount of effort that was required to transition from CPU to GPU computing. It will require buy-in from the entire WSC/CP program and beyond, including all integrated codes, physics and engineering models, third-party library dependencies and performance portability abstractions. It will also require investment in research and development of numerical methods for computing adjoints of coupled physics across multiple adaptively refined moving meshes and of stochastic (Monte Carlo) and mesh free (SPH) methods. • New software and numerical techniques, largely pioneered by the AI/ML community, make this feasible. Chief among these is automatic differentiation (AD), the ability to employ AD at point-wise locations in a physics calculation (instead of traditional black-box approaches) and the ability to perform “back-propagation in time” (or reverse mode AD) for non-linear partial differential equations (PDEs). Fundamentally, the conclusion of this strategic planning exercise is that the time is right to undertake a large scale effort in WSC, centered on the existing integrated codes, to continue the natural evolution of mod/sim in the age of AI/ML. Instead of attempting to replace mod/sim with purely data driven AI/ML models, we believe the key to success is to integrate AI/ML by building on top of the decades of hard-won knowledge and the verified/validated multiphysics modelling capability that is the hallmark of the ASC program.

97 MATHEMATICS AND COMPUTING↗

Advanced low NO/x/ combustors for supersonic high-altitude aircraft gas turbines

A test rig program was conducted with the objective of evaluating and minimizing the exhaust emissions, in particular NO(x), of two advanced aircraft combustor concepts at a simulated, high-altitude cruise condition. The two combustor designs, both members of the lean-reaction, pre-mixed family, are known as the Jet Induced Circulation (JIC) combustor and the Vortex Air Blast (VAB) combustor and were rig tested in the form of reverse flow can combustors in the 0.127-m size range. Various configuration modifications were applied to each of the initial JIC and VAB combustor model designs in an effort to reduce the emissions levels. The VAB combustor demonstrated a NO(x) level of 1.1 gm NO2/kg fuel with essentially 100 percent combustion efficiency at the simulated cruise combustor condition of 507 kPa, 833 K inlet pressure and temperature, respectively and 1778 K outlet temperature on Jet-A1 fuel. In addition, emissions data were obtained at low combustor inlet pressure and temperatures that indicate the potential performance at engine off-design conditions.

Roberts, P. B.↗

Nonclassical Strong Metal–Support Interactions for Enhanced Catalysis

Strong metal–support interaction (SMSI), which encompasses reversible encapsulation and de-encapsulation and modulation of surface adsorption properties, imposes great impacts on the performance of heterogeneous catalysts. Recent development of SMSI has surpassed the prototypical encapsulated Pt-TiO 2 catalyst, affording a series of conceptually novel and practically advantageous catalytic systems. Here, in this work, we provide our perspective on recent progress in nonclassical SMSIs for enhanced catalysis. Unravelling the structural complexity of SMSI necessitates the combination of multiple characterization techniques at different scales. Synthesis strategies leveraging chemical, photonic, and mechanochemical driving forces further expand the definition and application scope of SMSI. Exquisite structure engineering permits elucidation of the interface, entropy, and size effect on the geometric and electronic characteristics. Materials innovation places the atomically thin two-dimensional materials at the forefront of interfacial active site control. A broader space is awaiting exploration, where exploitation of metal–support interactions brings compelling catalytic activity, selectivity, and stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Proposal for a High-Voltage Transmission Line Directional Coupler

Directional couplers are devices generally used in high frequency transmission lines and waveguides that respond to forward and reverse traveling waves separately. Hence they can be used to either measure standing wave ratio in the steady state or to determine the direction of a propagating transient wave. Here, a design is proposed for a directional coupler to be used on multimode high voltage transmission lines. Its performance is analyzed and several suggestions are made for improving its design.

42 ENGINEERING↗

Three-dimensional time reversal communications in elastic media

Our letter presents a series of vibrational communication experiments, using time reversal, conducted on a set of cast iron pipes. Time reversal has been used to provide robust, private, and clean communications in many underwater acoustic applications. Also, the use of time reversal to communicate along sections of pipes and through a wall is demonstrated here in order to overcome the complications of dispersion and multiple scattering. These demonstrations utilize a single source transducer and a single sensor, a triaxial accelerometer, enabling multiple channels of simultaneous communication streams to a single location.

42 ENGINEERING↗

An Overview of Prognosis Health Management Research at GRC for Gas Turbine Engine Structures With Special Emphasis on Deformation and Damage Modeling

Herein a general, multimechanism, physics-based viscoelastoplastic model is presented in the context of an integrated diagnosis and prognosis methodology which is proposed for structural health monitoring, with particular applicability to gas turbine engine structures. In this methodology, diagnostics and prognostics will be linked through state awareness variable(s). Key technologies which comprise the proposed integrated approach include 1) diagnostic/detection methodology, 2) prognosis/lifing methodology, 3) diagnostic/prognosis linkage, 4) experimental validation and 5) material data information management system. A specific prognosis lifing methodology, experimental characterization and validation and data information management are the focal point of current activities being pursued within this integrated approach. The prognostic lifing methodology is based on an advanced multi-mechanism viscoelastoplastic model which accounts for both stiffness and/or strength reduction damage variables. Methods to characterize both the reversible and irreversible portions of the model are discussed. Once the multiscale model is validated the intent is to link it to appropriate diagnostic methods to provide a full-featured structural health monitoring system.

Arnold, Steven M.↗

Mechanical and Hydraulic Actuation Strategies for Mainstage Spool Valves in Hydraulic Motors

A large variety of options for the internal valves of a hydraulic motor are available. Poppet valves, rotary valves, and port plates are common options, but each have drawbacks such as actuation force, complexity, leakage, or friction. An alternative type that is also common is spool valves. Spool valves require minimal actuation force and have low throttling losses if sized correctly. This paper compares two drive options for a mainstage spool valve: a hydraulic pilot from a rotary valve and mechanical actuation. Dynamic models of the two valve configurations are created to carry out design studies and evaluate the performance of the motor. Compressibility effects, viscous drag, and flow forces are included in the model. Simulations show that the rotary valve pilot operation causes an unacceptable lag in the motion of the spool that cannot be corrected without reducing performance when running in reverse. Furthermore, the rotary pilot stage drive results in the motor timing becoming retarded at higher operating speeds. For these reasons, mechanically actuated valves are preferred over pilot operated valves for hydraulic motors operated bi-directionally or across a wide speed range.

42 ENGINEERING↗

Regulation of Meiotic Recombination

Meiotic recombination results in the heritable rearrangement of DNA, primarily through reciprocal exchange between homologous chromosome or gene conversion. In plants these events are critical for ensuring proper chromosome segregation, facilitating DNA repair and providing a basis for genetic diversity. Understanding this fundamental biological mechanism will directly facilitate trait mapping, conventional plant breeding, and development of genetic engineering techniques that will help support the responsible production and conversion of renewable resources for fuels, chemicals, and the conservation of energy (1-3). Substantial progress has been made in understanding the basal recombination machinery, much of which is conserved in organisms as diverse as yeast, plants and mammals (4, 5). Significantly less is known about the factors that regulate how often and where that basal machinery acts on higher eukaryotic chromosomes. One important mechanism for regulating the frequency and distribution of meiotic recombination is crossover interference - or the ability of one recombination event to influence nearby events. The MUS81 gene is thought to play an important role in regulating the influence of interference on crossing over. The immediate goals of this project are to use reverse genetics to identify mutants in two putative MUS81 homologs in the model plant Arabidopsis thaliana, characterize those mutants and initiate a novel forward genetic screen for additional regulators of meiotic recombination. The long-term goal of the project is to understand how meiotic recombination is regulated in higher eukaryotes with an emphasis on the molecular basis of crossover interference. The ability to monitor recombination in all four meiotic products (tetrad analysis) has been a powerful tool in the arsenal of yeast geneticists. Previously, the qrt mutant of Arabidopsis, which causes the four pollen products of male meiosis to remain attached, was developed as a facile system for assaying recombination using tetrad analysis in a higher eukaryotic system (6). This system enabled the measurement of the frequency and distribution of recombination events at a genome wide level in wild type Arabidopsis (7), construction of genetic linkage maps which include positions for each centromere (8), and modeling of the strength and pattern of interference (9). This proposal extends the use of tetrad analysis in Arabidopsis by using it as the basis for assessing the phenotypes of mutants in genes important for recombination and the regulation of crossover interference and performing a novel genetic screen. In addition to broadening our knowledge of a classic genetic problem - the regulation of recombination by crossover interference - this proposal also provides broader impact by: generating pedagogical tools for use in hands-on classroom experience with genetics, building interdisciplinary collegial partnerships, and creating a platform for participation by junior scientists from underrepresented groups. There are three specific aims: (1) Isolate mutants in Arabidopsis MUS81 homologs using T-DNA and TILLING (2) Characterize recombination levels and interference in mus81 mutants (3) Execute a novel genetic screen, based on tetrad analysis, for genes that regulate meiotic recombination

59 BASIC BIOLOGICAL SCIENCES↗

Surface-Driven Evolution of the Anomalous Hall Effect in Magnetic Topological Insulator MnBi 2 Te 4 Thin Films

We report understanding the effects of the interfacial modification to the functional properties of magnetic topological insulator thin films is crucial for developing novel technological applications from spintronics to quantum computing. Here, a large electronic and magnetic response is reported to be induced in the intrinsic magnetic topological insulator MnBi 2 Te 4 by controlling the propagation of surface oxidation. It is shown that the formation of the surface oxide layer is confined to the top 1–2 unit cells but drives large changes in the overall magnetic response. Specifically, a dramatic reversal of the sign of the anomalous Hall effect is observed to be driven by finite thickness magnetism, which indicates that the film splits into distinct magnetic layers each with a unique electronic signature. These data reveal a delicate dependence of the overall magnetic and electronic response of MnBi 2 Te 4 on the stoichiometry of the top layers. This study suggests that perturbations resulting from surface oxidation may play a non-trivial role in the stabilization of the quantum anomalous Hall effect in this system and that understanding targeted modifications to the surface may open new routes for engineering novel topological and magnetic responses in this fascinating material.

36 MATERIALS SCIENCE↗

Coal-derived graphene foam and micron-sized silicon composite anodes for lithium-ion batteries

Silicon-based materials demonstrate significant potential as lithium-ion batteries (LIBs) anode, but their expansion and degradation present engineering design challenges for commercial application. In this study, a porous three-dimensional (3D) graphene and micron-sized silicon composite anode (Si@G foam) was synthesized using humic acid (HA) derived from coal as a graphene precursor. In-situ formation of graphene structure through reducing HA was confirmed by Raman spectra. The reduced HA (rHA) shows similar electrical conductivity compared to the commercial conductive carbon. SEM images depict a 3D skeleton of coal-derived graphene, with silicon particles distributed on the 3D graphene foam's internal surface. The Si@G composite-anode displays a good reversible capacity of ~656 mAh/g at a current density of 50 mA/g, as well as a high-rate capability of ~433 mAh/g at a current density of 800 mA/g, and outstanding cycling stability –89.8% capacity retention after 300 cycles, which is significantly higher than that of other foam structures. During lithiation and de-lithiation, the graphene foam serves as a matrix of electrical conductors and a volume expansion support for silicon. This 3D graphene network will be beneficial for developing advanced silicon-based anodes for high-performance LIBs.

25 ENERGY STORAGE↗

Concerted Formation of Reversibly Precipitated Sulfur Species and Its Importance for Lean Electrolyte Lithium–Sulfur Batteries

Achieving high energy densities for lithium-sulfur batteries remain elusive. Largely limited by the volume of electrolyte used, lean electrolyte conditions (electrolyte/sulfur mass ratio <3) present enormous challenges that have led to very poor specific capacity and rate performance. Previous studies have identified that the high concentration of polysulfide is responsible for the poor discharge voltage. However, there still lacks sufficient understanding of the processes occurring at lean electrolyte conditions. Here, in this work we uncovered a polysulfide concentration regulating mechanism that operates through the precipitation and redissolution of solid sulfur-based species (reversibly precipitated sulfur species, RPSS). This occurs in a concerted manner in a global sense through the cathode and can be measured using impedance spectroscopy. It was found that the more RPSS that is formed, the higher the energy density of discharge. We propose that high concentration of polysulfide tends to supersaturate, which impeded the formation of RPSS. Employing an electrolyte with low Li ion concentration along with using poorly dissociating lithium salts allowed for more RPSS formation and ultimately enabled discharge at >2.0 V at 0.05 C, at E/S = 2.5, and at room temperature without the use of an engineered cathode.

25 ENERGY STORAGE↗

Development of Membrane Distillation Technology Utilizing Waste Heat for Treatment of High Salinity Wastewaters

Membrane distillation (MD) can serve as a cost effective method to treat high salinity wastewaters, especially if waste heat is utilized for its operation. The goal of this work is to study the feasibility of employing MD technology for the treatment of high salinity wastewaters which are generated as a result of natural gas production and active reservoir management for CO 2 sequestration. This study also aimed at quantifying the availability of waste heat which could be used as the primary source of thermal energy to drive the MD process. Bench scale studies were carried out with several commercially available membranes using both synthetic and actual high salinity wastewaters. The membranes tested with real wastewater samples exhibited excellent rejection of dissolved ions, including naturally occurring radioactive material (NORM). Long term bench scale experiments with real produced water from the Marcellus shale play revealed that iron oxide could precipitate on the feed side of direct contact MD (DCMD) module but had a negligible effect on the performance of the system. Based on the bench scale experiments, an ASPEN Plus simulation, which incorporated a mathematical model with fundamental heat and mass transfer equations, was developed and used to evaluate the process energy requirements. Despite low operating temperature and pressure for MD, it had a large thermal energy requirement for operation, which could make this technology expensive compared to reverse osmosis (RO) and forward osmosis (FO). However, it is important to note that RO and FO have limited applicability for high salinity shale gas wastewater. Moreover, MD could be integrated with renewable energy sources such as wind or solar energy or industrial waste heat sources to offset the thermal energy requirements and enhance the economics of wastewater treatment. Natural gas compressor stations (NG CS) have been proposed in this study as the source of waste heat based on the estimate of quantity and quality of available waste heat in the exhaust streams of gas turbine and internal combustion compressor engines. Using the actual installed capacity and location of compressor stations in the U.S., this analysis revealed that an average of 610 TJ/day of thermal energy is available at existing NG CS and that this source of waste heat is of high quality with temperatures above 645 K. A systems-level integration of MD with waste heat from NG CS revealed that approximately 56% of available waste heat at NG CS in Pennsylvania is sufficient to concentrate (from 10% to 30% salinity) all wastewater associated with shale gas extraction. Techno-economic assessment (TEA) accounting for capital as well as operating and maintenance costs with and without waste heat integration was conducted for a hypothetical 0.5 million gallons per day (MGD) DCMD plant using experimental and modeling results from this study. TEA revealed that the total cost of shale gas wastewater treatment using MD is $5.7/m 3 feed for the base case scenario in which the thermal energy requirements are met by external steam, however, the total cost can be reduced to $0.74/m 3 feed when integrated with free waste heat from NG CS. Sensitivity analysis revealed that thermal energy cost and feed TDS are the most important factors in total cost of high salinity wastewater treatment using DCMD.

03 NATURAL GAS↗

Kinetic modelling of an environmentally friendly carbamazepine synthesis via urea and iminostilbene in batch and continuous processes

Accurate kinetic models for reaction systems allow for improved process understanding and greater quality control, which is particularly beneficial as the pharmaceutical industry shifts from batch to continuous manufacturing (CM). In this work, a first principles kinetic model has been developed for the synthesis of carbamazepine (CBZ) from iminostilbene and urea, starting in a batch reactor and subsequently in a continuous flow reactor. An eco-friendly reaction pathway using urea was selected to avoid the toxic reagents that are typically used for synthesis of CBZ. The kinetic parameters determined from batch reactions were utilized in a MATLAB based kinetic model to simulate the yield for the continuous process. Overall, good agreement between the model prediction and corresponding experimental values was observed for the batch and continuous reaction systems within the full factorial design space. However, the model slightly overpredicted the yield of the continuous reaction system for higher conversion values (>60%) since it did not account for the reverse reaction that can occur at the studied reaction conditions. Here, the use of broken order kinetics was compared with whole number orders, and it was determined that the whole number orders resulted in better agreement at all conversion values for the continuous system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase field simulation of grain size effects on the phase coexistence and magnetostrictive behavior near the ferromagnetic morphotropic phase boundary

The grain size effects on the phase coexistence and magnetostrictive response of Tb 1-x Dy x Fe 2 polycrystals near the ferromagnetic morphotropic phase boundary (MPB) are revealed through phase-field modeling. It shows that phase coexistence is a universal phenomenon in polycrystals for both ferromagnetic and ferroelectric MPB and that the range of compositions for phase coexistence increases with decreasing grain sizes. A large, reversible, and anhysteretic magnetostrictive response at low external fields is also found in the fine-grained polycrystals around the ferromagnetic MPB, which offers us a route to developing nanocrystalline magnetostrictive materials.

42 ENGINEERING↗

Tailoring the Reaction Heterogeneity for Robust Li‐Rich Cathodes

The practical application of Li-rich Mn-based layered oxides (LLO) cathode is hindered by severe capacity and voltage degradation resulting from severe oxygen release and irreversible phase transition. In this work, the reaction heterogeneity, which describes the spatially resolved electrochemical divergence within individual cathode particles, is engineered through compositional gradient design to couple Li + transport kinetics and the anion redox activity between particle interiors and surfaces. It is revealed that Co/Mn concentration gradient within particles creates heterogeneous phase content distribution and structural ordering, inducing surface-bulk reaction heterogeneity that significantly impacts the overall electrochemical performance. Specifically, Li 2 MnO 3 -poor and Co-enriched surface effectively mitigates the oxygen loss and enhances electrochemical reaction kinetics, benefited from the reduced surface redox reactivity and induced highly ordered intra-layered cationic arrangement. Meanwhile, the Li 2 MnO 3 -enriched core with slight Li/Ni intermixing provides high reversible capacity and strong mechanical stability. Consequently, the greatly enhanced anion redox reversibility, Li + diffusion dynamics, and structure stability endow LLO with exceptional electrochemical properties, showing a capacity retention of 86.0% and a reduced voltage decay of 0.518 mV per cycle after 500 cycles at 1 C. This work provides a valuable strategy to tailor the redox chemistry and achieve robust LLO.

25 ENERGY STORAGE↗

Light-wave-controlled Haldane model in monolayer hexagonal boron nitride

In recent years, the stacking and twisting of atom-thin structures with matching crystal symmetry has provided a unique way to create new superlattice structures in which new properties emerge. In parallel, control over the temporal characteristics of strong light fields has allowed researchers to manipulate coherent electron transport in such atom-thin structures on sublaser-cycle timescales. Here we demonstrate a tailored light-wave-driven analogue to twisted layer stacking. Tailoring the spatial symmetry of the light waveform to that of the lattice of a hexagonal boron nitride monolayer and then twisting this waveform result in optical control of time-reversal symmetry breaking and the realization of the topological Haldane model in a laser-dressed two-dimensional insulating crystal. Further, the parameters of the effective Haldane-type Hamiltonian can be controlled by rotating the light waveform, thus enabling ultrafast switching between band structure configurations and allowing unprecedented control over the magnitude, location and curvature of the bandgap. This results in an asymmetric population between complementary quantum valleys that leads to a measurable valley Hall current, which can be detected by optical harmonic polarimetry. The universality and robustness of our scheme paves the way to valley-selective bandgap engineering on the fly and unlocks the possibility of creating few-femtosecond switches with quantum degrees of freedom.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗