Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Dynamics and structure of turbulent premixed flames

In earlier work (Mantel & Bilger, 1994) the structure of the turbulent premixed flame was investigated using statistics based on conditional averaging with the reaction progress variable as the conditioning variable. The DNS data base of Trouve and Poinsot (1994) was used in this investigation. Attention was focused on the conditional dissipation and conditional axial velocity in the flame with a view to modeling these quantities for use in the conditional moment closure (CMC) approach to analysis of kinetics in premixed flames (Bilger, 1993). Two remarkable findings were made: there was almost no acceleration of the axial velocity in the flame front itself; and the conditional scalar dissipation remained as high, or higher, than that found in laminar premixed flames. The first finding was surprising since in laminar flames all the fluid acceleration occurs through the flame front, and this could be expected also for turbulent premixed flames at the flamelet limit. The finding gave hope of inventing a new approach to the dynamics of turbulent premixed flames through use of rapid distortion theory or an unsteady Bernoulli equation. This could lead to a new second order closure for turbulent premixed flames. The second finding was contrary to our measurements with laser diagnostics in lean hydrocarbon flames where it is found that conditional scalar dissipation drops dramatically below that for laminar flamelets when the turbulence intensity becomes high. Such behavior was not explainable with a one-step kinetic model, even at non-unity Lewis number. It could be due to depletion of H2 from the reaction zone by preferential diffusion. The capacity of the flame to generate radicals is critically dependent on the levels of H2 present (Bilger, et al., 1991). It seemed that a DNS computation with a multistep reduced mechanism would be worthwhile if a way could be found to make this feasible. Truly innovative approaches to complex problems often come only when there is the opportunity to work close at hand with the (in this case numerical) experimental data. Not only can one spot patterns and relationships in the data which could be important, but one can also get to know the limitations of the technique being used, so that when the next experiment is being designed it will address resolvable questions. A three-year grant from the Australian Research Council has enabled us to develop a small capability at the University of Sydney to work on DNS of turbulent reacting flow, and to analyze data bases generated at CTR. Collaboration between the University of Sydney and CTR is essential to this project and finding a workable modus operandum for this collaboration, given the constraints involved, has been a major objective of the past year's effort. The overall objectives of the project are: (1) to obtain a quantitative understanding of the dynamics of turbulent premixed flames at high turbulence levels with a view to developing improved second order closure models; and (2) to carry out new DNS experiments on turbulent premixed flames using a carefully chosen multistep reduced mechanism for the chemical kinetics, with a view to elucidating the laser diagnostic findings that are contrary to the findings for DNS using one-step kinetics. In this first year the objectives have been to make the existing CTR data base more accessible to coworkers at the University of Sydney, to make progress on understanding the dynamics of the flame in this existing CTR data base, and to carefully construct a suitable multistep reduced mechanism for use in a new set of DNS experiments on turbulent premixed flames.

Bilger, R. W.↗
NASA NTRS1992

Control-structures Interaction Test of the LACE Satellite

It is clear that additional experience and validation of Control Structures Interaction (CSI) techniques are needed in controlling the structural dynamics of flexible spacecraft. It is also clear that the effects of the space environment such as weightlessness dictate that this be done in space. Unfortunately, orbital tests are difficult to achieve because of the high cost of the test article, the launch into orbit, the instrumentation, and communication systems. The Low-power Atmospheric Compensation Experiment (LACE) Satellite has provided an opportunity to achieve a CSI test in space for very little cost. First, the CSI test rode piggy-back and did not interfere with the primary objective of LACE. Second, the novel technique of using ground based measurements of vibration of the orbiting satellite was employed. The LACE has a heavy central body to which is attached booms with lengths as long as 150 feet. The ground measurements were obtained using laser Doppler radar at the MIT Lincoln Laboratory Firepond Facility. The initial tests demonstrated the accuracy of the vibration measurements and obtained structural responses for enhancing the accuracy of the mathematical model of the structural dynamics. Germanium corner-cube retroreflectors attached to the central body and a boom deployed to 18 feet ensured a high strength return signal. Subsequent tests demonstrated the ability of an open-loop damper to attenuate the vibrations of the orbiting satellite. The LACE test results are important in contributing to the validation of a CSI technique, and demonstrating a novel ground measurement technique for orbital tests that is accurate but which has very low cost.

Taylor, Lawrence W., Jr.↗
DOE OSTI2024

Delineation of the impact on temporal behaviors of off-axis photoemission in an ultrafast electron microscope

Efforts to push the spatiotemporal imaging-resolution limits of femtosecond laser-driven ultrafast electron microscopes (UEMs) to the combined angstrom–fs range will benefit from stable sources capable of generating high bunch charges. Recent demonstrations of unconventional off-axis photoemitting geometries are promising, but connections to the observed onset of structural dynamics are yet to be established. Here we use the in-situ photoexcitation of coherent phonons to quantify the relative time-of-flight (r-TOF) of photoelectron packets generated from the Ni Wehnelt aperture and from a Ta cathode set-back from the aperture plane. We further support the UEM experiments with particle-tracing simulations of the precise electron-gun architecture and photoemitting geometries. In this way, we measure discernible shifts in electron-packet TOF of tens of picoseconds for the two photoemitting surfaces. Furthermore, these shifts arise from the impact that the Wehnelt-aperture off-axis orientation has on the electron-momentum distribution, which modifies both the collection efficiency and the temporal-packet distribution relative to on-axis emission. Future needs are identified; we expect this and other developments in UEM electron-gun configuration to expand the range of material phenomena that can be directly imaged on scales commensurate with fundamental structural dynamics.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Conservation of endo -glucanase 16 (EG16) activity across highly divergent plant lineages

Plant cell walls are highly dynamic structures that are composed predominately of polysaccharides. As such, endogenous carbohydrate active enzymes (CAZymes) are central to the synthesis and subsequent modification of plant cells during morphogenesis. The endo-glucanase 16 (EG16) members constitute a distinct group of plant CAZymes, angiosperm orthologs of which were recently shown to have dual β-glucan/xyloglucan hydrolase activity. Molecular phylogeny indicates that EG16 members comprise a sister clade with a deep evolutionary relationship to the widely studied apoplastic xyloglucan endo-transglycosylases/hydrolases (XTH). A cross-genome survey indicated that EG16 members occur as a single ortholog across species and are widespread in early diverging plants, including the non-vascular bryophytes, for which functional data were previously lacking. Remarkably, enzymological characterization of an EG16 ortholog from the model moss Physcomitrella patens (PpEG16) revealed that EG16 activity and sequence/structure are highly conserved across 500 million years of plant evolution, vis-à-vis orthologs from grapevine and poplar. Ex vivo biomechanical assays demonstrated that the application of EG16 gene products caused abrupt breakage of etiolated hypocotyls rather than slow extension, thereby indicating a mode-of-action distinct from endogenous expansins and microbial endo-glucanases. As a result, the biochemical data presented here will inform future genomic, genetic, and physiological studies of EG16 enzymes.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2017

Idealized Simulations of a Squall Line from the MC3E Field Campaign Applying Three Bin Microphysics Schemes: Dynamic and Thermodynamic Structure

The squall line event on May 20, 2011, during the Midlatitude Continental Convective Clouds (MC3E) field campaign has been simulated by three bin (spectral) microphysics schemes coupled into the Weather Research and Forecasting (WRF) model. Semi-idealized three-dimensional simulations driven by temperature and moisture profiles acquired by a radiosonde released in the pre-convection environment at 1200 UTC in Morris, Oklahoma show that each scheme produced a squall line with features broadly consistent with the observed storm characteristics. However, substantial differences in the details of the simulated dynamic and thermodynamic structure are evident. These differences are attributed to different algorithms and numerical representations of microphysical processes, assumptions of the hydrometeor processes and properties, especially ice particle mass, density, and terminal velocity relationships with size, and the resulting interactions between the microphysics, cold pool, and dynamics. This study shows that different bin microphysics schemes, designed to be conceptually more realistic and thus arguably more accurate than bulk microphysics schemes, still simulate a wide spread of microphysical, thermodynamic, and dynamic characteristics of a squall line, qualitatively similar to the spread of squall line characteristics using various bulk schemes. Future work may focus on improving the representation of ice particle properties in bin schemes to reduce this uncertainty and using the similar assumptions for all schemes to isolate the impact of physics from numerics.

Xue, Lulin↗
DOE OSTI2025

Multidimensional Modeling of Mixture Formation in a Hydrogen-Fueled Heavy-Duty Optical Engine With Direct Injection

Hydrogen (H 2 ), as a carbon-free fuel, is considered as one of the most promising solutions to reduce the carbon footprint of hard-to-decarbonize energy and transportation sectors. As such, hydrogen-fueled internal combustion engines (H 2 ICEs) have recently been receiving increasing attention, particularly in applications such as on-road/off-road heavy-duty transport and combined heat and power. The direct injection (DI) of gaseous hydrogen into the combustion chamber offers great potential for achieving high power density and high engine efficiency, while mitigating the risk of backfire and reducing pre-ignition. However, the numerical simulation of H 2 DI system remains a formidable challenge associated with the high computational cost of reproducing compressible supersonic flow and shocks in narrow injector passages and in near-nozzle regions. In general, there is a lack of well-established and validated practices for the modeling of high-pressure H 2 DI in large-bore engines. Here, to this end, this study focuses on computational fluid dynamics (CFD) modeling of the mixture formation process in a heavy-duty optical engine employing a medium-pressure H 2 DI system. Both large eddy simulations (LES) and Reynolds Averaged Navier–Stokes (RANS) simulations are performed and evaluated against optical data. Gaseous hydrogen is injected into the combustion chamber via a centrally located outward opening hollow-cone injector at a pressure of 40 bar. Simulations are carried out for two injection timings, namely, −120 and −60 °CA. The numerical predictions for H 2 distribution in different horizontal and vertical planes during the compression stroke are systematically compared against optical data obtained through planar laser-induced fluorescence (PLIF) measurements. Overall, the LES approach using the Dynamic Structure model is found to have good predictive capabilities for the early jet penetration in terms of length and shape, as well as the later H 2 distributions. However, the unsteady RANS approach with the renormalization group $k - ϵ$ model, which is widely used by industry to model heavy-duty ICEs, significantly underpredicts the H 2 mixing, even at similar mesh resolution to that used in LES. These results indicate that there is a need for the improvement of mixing submodels within the RANS approach when applied to H 2 DI simulations.

LES↗
DOE OSTI2022

Fast imaging of laser ablation of cerium: Dependence of plasma plume dynamics and structure on native oxide growth

We have imaged the evolution of plasma following nanosecond pulsed laser ablation of cerium in air with sub-10 ns resolution. We find the ablated plasma plume expansion and shape to be strongly dependent on the time after mechanical polishing of the sample surface. After an initial shock front common to both new and aged samples (velocities up to 16 km s ₋1 ), we observe a second front that is relatively localized to the surface vicinity of newly polished samples, but in the case of older samples it moves outward at velocities of up to 4 km s ₋1 . We attribute this behavior to the formation and growth of a native oxide layer on the order of hours after polishing. These results demonstrate that plasma imaging can be used to diagnose the presence of, and evaluate the extent of, thin surface oxides or other compounds that form soon after exposure to some atmosphere. These findings also highlight the need to explicitly consider the presence of such overlayers when modeling laser/metal interaction, when making measurements of vapor phase chemistry, and when analyzing the composition, phase, and morphology of solid particulates formed after the ablation of reactive metals.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2012

An Assessment of CFD/CSD Prediction State-of-the-Art by Using the HART II International Workshop Data

Over the past decade, there have been significant advancements in the accuracy of rotor aeroelastic simulations with the application of computational fluid dynamics methods coupled with computational structural dynamics codes (CFD/CSD). The HART II International Workshop database, which includes descent operating conditions with strong blade-vortex interactions (BVI), provides a unique opportunity to assess the ability of CFD/CSD to capture these physics. In addition to a baseline case with BVI, two additional cases with 3/rev higher harmonic blade root pitch control (HHC) are available for comparison. The collaboration during the workshop permits assessment of structured, unstructured, and hybrid overset CFD/CSD methods from across the globe on the dynamics, aerodynamics, and wake structure. Evaluation of the plethora of CFD/CSD methods indicate that the most important numerical variables associated with most accurately capturing BVI are a two-equation or detached eddy simulation (DES)-based turbulence model and a sufficiently small time step. An appropriate trade-off between grid fidelity and spatial accuracy schemes also appears to be pertinent for capturing BVI on the advancing rotor disk. Overall, the CFD/CSD methods generally fall within the same accuracy; cost-effective hybrid Navier-Stokes/Lagrangian wake methods provide accuracies within 50% the full CFD/CSD methods for most parameters of interest, except for those highly influenced by torsion. The importance of modeling the fuselage is observed, and other computational requirements are discussed.

Smith, Marilyn J.↗
DOE OSTI2022

Structural and Dynamic Analysis of Sulphur Dioxide Adsorption in a Series of Zirconium-Based Metal–Organic Frameworks

We report reversible high capacity adsorption of SO 2 in robust Zr-based metal–organic framework (MOF) materials. Zr-bptc (H 4 bptc=biphenyl-3,3',5,5'-tetracarboxylic acid) shows a high SO 2 uptake of 6.2 mmol g -1 at 0.1 bar and 298 K, reflecting excellent capture capability and removal of SO 2 at low concentration (2500 ppm). Dynamic breakthrough experiments confirm that the introduction of amine, atomically-dispersed Cu II or heteroatomic sulphur sites into the pores enhance the capture of SO 2 at low concentrations. The captured SO 2 can be converted quantitatively to a pharmaceutical intermediate, aryl N-aminosulfonamide, thus converting waste to chemical values. In situ X-ray diffraction, infrared micro-spectroscopy and inelastic neutron scattering enable the visualisation of the binding domains of adsorbed SO 2 molecules and host–guest binding dynamics in these materials at the atomic level. Refinement of the pore environment plays a critical role in designing efficient sorbent materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Tracking the Light-Induced Excited-State Dynamics and Structural Configurations of an Extraordinarily Long-Lived Metastable State at Room Temperature

Time-resolved X-ray (Tr-XAS) and optical transient absorption (OTA) spectroscopy in the pico-microsecond time scale coupled with Density Functional theory calculations are applied to study the light-induced spin crossover processes of a Fe-based macrocyclic complex in solution. Tr-XAS analysis after light illumination shows the formation of a seven-coordinated high spin quintet metastable state which relaxes to a six-coordinated high spin configuration before decaying to ground state. Kinetic analysis of the macrocyclic complex reveals an unprecedented long-lived decay lifetime of ~42.6 µs. Comparative studies with a non-macrocyclic counterpart illustrate a significantly shortened ~568-old decay lifetime of ~75 ns, and highlight the importance of the ligand arrangement in stabilizing the reactivity of the excited state. Lastly, OTA analysis shows the seven-coordinated high spin state to be formed within ~6.2 ps. Finally, these findings provide a complete understanding of the spin crossover reaction and relaxation pathways of the macrocyclic complex, and reveal the importance of a flexible coordination environment for their rational design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Photodetachment Dynamics and Structural Flexibility of Undercoordinated Iridium Halides IrCl n − (n = 3−5): An Experimental and Theoretical Investigation

Three undercoordinated iridium chloride anions, IrCl n − (n = 3–5), and their neutral counterparts were investigated by cryogenic anion photoelectron spectroscopy and theoretical calculations. Photodetachment of IrCl n − leads to the formation of the corresponding neutral complex, i.e., a triplet ground state for n = 3, a quartet for n = 4, and close-lying singlet and triplet for n = 5. The vertical detachment energies are determined to be 3.89, 4.98, and 5.14 eV for n = 3, 4, and 5, respectively, revealing superhalogen anion properties with increasing electron detachment energies as chloride ligands added. The IrCl 3 − spectrum features an extremely broad, lowest electron binding energy band, attributed to resonant autodetachment with prominent non-Franck–Condon profiles. In IrCl 5 − , detachment prompts a d-orbital rearrangement that drives a structural transformation from a twisted square-based pyramidal to a trigonal–bipyramidal geometry in the singlet state. In conclusion, these findings provide insights into the electronic and structural adaptability of iridium halides, advancing our understanding of ligand exchange reactions and dissociative stability in transition metal complexes.

Tang, Peng [East China Normal Univ. (ECNU), Shangh↗
DOE OSTI2026

Structure and Dynamics of Imidazolium in an Ionic Liquid-PEGDA Iongel via IR, 2D-IR, and NMR Spectroscopy

Fourier transform infrared (FTIR) absorption spectroscopy, ultrafast two-dimensional infrared (2D-IR) spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, and density functional theory (DFT) calculations show that, in iongels composed of 1-ethyl-3-methylimidazolium bis(trifluoromethyl\-sulfonyl)imide ([C 2 C 1 Im][Tf 2 N]}) and cross-linked poly(ethylene glycol)diacrylate (cl-PEGDA), imidazolium cations solvate PEGDA chains in tight and loose complexes. H/D isotope substitution at the 2-position of the imidazolium ring simplifies the CH-stretching vibrational bands. Tight complexes are characterized by stronger, directional hydrogen bonding interactions between the 2-position of the imidazolium ring and the ethereal oxygens. The loose complexes resemble bulk ionic liquid (IL) non-specifically perturbed by the PEGDA chains.

ionic liquids, carbon dioxide, cross-linked PEGDA,↗
DOE OSTI2017

Quantum chemical study of the structures and dynamic behavior of tricarbonyl complexes of Group 6 metals (Cr, Mo, W) with polyaromatic hydrocarbons using the density functional theory

The quantum chemical study of the mechanism was performed for tricarbonyl η{sup 6}-complexes of coronene I-M and kekulene II-M (M = Cr, Mo, W) by the density functional method. The activation barriers of η{sup 6},η{sup 6}-interring haptotropic rearrangements (IHR), being the migration of the metaltricarbonyl group M(CO){sub 3} from one six-membered aromatic ring to another, were determined. The processes of η{sup 6},η{sup 6}-IHR in the metal tricarbonyl complexes with relatively high polycyclic aromatic hydrocarbons (PAH) I and II occur with close energy barriers (ΔG{sup ≠} ≈ 20—25 kcal mol{sup –1}), which are lower than the barriers (ΔG{sup ≠} ~ 30 kcal mol{sup –1}) of similar transformations measured or calculated earlier for the chromium tricarbonyl complexes of naphthalene and its derivatives and other PAH. For the molybdenum tricarbonyl complexes the activation barriers of η{sup 6},η{sup 6}-IHR decrease additionally by ~ 5 kcal mol{sup –1} compared to those for the chromium tricarbonyl complexes, whereas for the tungsten tricarbonyl complexes they increase again and become approximately equal to the activation barriers of similar chromium tricarbonyl complexes. All stationary states on the potential energy surface determining the mechanism of η{sup 6},η{sup 6}-IHR are characterized by a decrease in hapticity compared to the initial and final complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Imogolite in water: Simulating the effects of nanotube curvature on structure and dynamics

Imogolite is a fascinating inorganic nanotube that is found in nature or synthesized in a laboratory. The synthesis process is carried out in liquid media, and leads to the formation of almost monodisperse diameter nanotubes. Here we investigate, employing classical molecular dynamics simulations, the interaction of water and imogolite for nanotubes of several radii. We established that water penetrates the pores of N = 9 and larger nanotubes, and adopts a coaxial arrangement in it. Also, while water molecules can diffuse along the center of the nanotube, the molecules next to the inner imogolite walls have very low mobility. At the outer nanotube wall, an increase of water density is observed, this effect extends up to 1 nm, beyond which water properties are bulk-like. Both phenomena are affected by the imogolite curvature.

58 GEOSCIENCES↗