Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface scattering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Superconducting proximity effect in a topological insulator using Fe(Te, Se)

Interest in the superconducting proximity effect has recently been reignited by theoretical predictions that it could be used to achieve topological superconductivity. Low- T c superconductors have predominantly been used in this effort, but small energy scales of ~1 meV have hindered the characterization of the emergent electronic phase, limiting it to extremely low temperatures. In this work, we use molecular beam epitaxy to grow topological insulator Bi 2 Te 3 in a range of thicknesses on top of a high- T c superconductor Fe(Te,Se). Using scanning tunneling microscopy and spectroscopy, we detect Δ ind as high as ~3.5 meV, which is the largest reported gap induced by proximity to an s -wave superconductor to date. We find that Δ ind decays with Bi 2 Te 3 thickness, but remains finite even after the topological surface states have been formed. Finally, by imaging the scattering and interference of surface state electrons, we provide a microscopic visualization of the fully gapped Bi 2 Te 3 surface state due to Cooper pairing. Lastly, our results establish Fe-based high- T c superconductors as a promising new platform for realizing high- T c topological superconductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Effects of Noise on Polarimetric SAR Data

Polarimetric SAR data can provide a great deal of information about the scattering behavior of the surface under observation. Polarimetric SAR systems often measure the scattering matrices of the areas under observation in linear polarizations (H and V). From the scattering matrix commonly used forms such as the covariance matrix and the Stokes matrix can be easily derived. Other measures derived from polarimetric SAR data include the standard deviation of texture, correlation coefficients between scattering matrix terms, and the mode and variance of phase differences between scattering matrix terms. The effects of additive system noise on these measurements is not often considered in the literature on this subject.

Polarimetric SAR Data analysis↗

The Effects of Noise on Polarimetric SAR Data

Polarimetric SAR data can provide a great deal of information about the scattering behavior of the surface under observation. Polarimetric SAR systems often measure the scattering matrices of the areas under observation in linear polarizations (H and V). From the scattering matrix commonly used forms such as the covariance matrix and the Stokes matrix can be easily derived. Other measures derived from polarimetric SAR data include correlation coefficients between scattering matrix terms and the mode and variance of phase differences between scattering matrix terms. The effects of additive system noise on these measurements is not often considered in the literature on this subject. In this paper, the effects of additive system noise on measurements derived from polarimetric SAR data will be examined. It will be shown how first-order noise effects can be removed and how second-order noise effects can be reduced for some measurements...

Freeman, A.↗

Near-Field Spectroscopy with Nanoparticles Deposited by AFM

An alternative approach to apertureless near-field optical spectroscopy involving an atomic-force microscope (AFM) entails less complexity of equipment than does a prior approach. The alternative approach has been demonstrated to be applicable to apertureless near-field optical spectroscopy of the type using an AFM and surface enhanced Raman scattering (SERS), and is expected to be equally applicable in cases in which infrared or fluorescence spectroscopy is used. Apertureless near-field optical spectroscopy is a means of performing spatially resolved analyses of chemical compositions of surface regions of nanostructured materials. In apertureless near-field spectroscopy, it is common practice to utilize nanostructured probe tips or nanoparticles (usually of gold) having shapes and dimensions chosen to exploit plasmon resonances so as to increase spectroscopic-signal strengths. To implement the particular prior approach to which the present approach is an alternative, it is necessary to integrate a Raman spectrometer with an AFM and to utilize a special SERS-active probe tip. The resulting instrumentation system is complex, and the tasks of designing and constructing the system and using the system to acquire spectro-chemical information from nanometer-scale regions on a surface are correspondingly demanding.

Anderson, Mark S.↗

Initial Assessment of an Airborne Ku-band Polarimetric SAR

Polarimetric synthetic aperture radar (SAR) has been used for a variety of dual-use research applications since the 1940's. By measuring the direction of the electric field vector from radar echoes, polarimetry may enhance an analyst's understanding of scattering effects for both earth monitoring and tactical surveillance missions. Polarimetry may provide insight into surface types, materials, or orientations for natural and man-made targets. Polarimetric measurements may also be used to enhance the contrast between scattering surfaces such as man-made objects and their surroundings. This report represents an initial assessment of the utility of, and applications for, polarimetric SAR at Ku-band for airborne or unmanned aerial systems.

Raynal, Ann Marie↗

SAR terrain classifier and mapper of biophysical attributes

In preparation for the launch of SIR-C/X-SAR and design studies for future orbital SAR, a program has made considerable progress in the development of an SAR terrain classifier and algorithms for quantification of biophysical attributes. The goal of this program is to produce a generalized software package for terrain classification and estimation of biophysical attributes and to make this package available to the larger scientific community. The basic elements of the SAR (Synthetic Aperture Radar) terrain classifier are outlined. An SAR image is calibrated with respect to known system and processor gains and external targets (if available). A Level 1 classifier operates on the data to differentiate: urban features, surfaces and tall and short vegetation. Level 2 classifiers further subdivide these classes on the basis of structure. Finally, biophysical and geophysical inversions are applied to each class to estimate attributes of interest. The process used to develop the classifiers and inversions is shown. Radar scattering models developed from theory and from empirical data obtained by truck-mounted polarimeters and the JPL AirSAR are validated. The validated models are used in sensitivity studies to understand the roles of various scattering sources (i.e., surface trunk, branches, etc.) in determining net backscatter. Model simulations of sigma (sup o) as functions of the wave parameters (lambda, polarization and angle of incidence) and the geophysical and biophysical attributes are used to develop robust classifiers. The classifiers are validated using available AirSAR data sets. Specific estimators are developed for each class on the basis of the scattering models and empirical data sets. The candidate algorithms are tested with the AirSAR data sets. The attributes of interest include: total above ground biomass, woody biomass, soil moisture and soil roughness.

Ulaby, Fawwaz T.↗

Interactions between silver nanoparticles and polyvinyl alcohol nanofibers

The interaction of polyvinylalcohol (PVA) nanofibers with silver (Ag) nanoparticles (mean diameter 8nm) has been modeled using density functional theory (DFT) calculations. The physical adsorption of PVA through the hydroxyl group, to the Ag, and its corresponding molecular orientation was compared with experimental results obtained from surface-enhanced Raman scattering (SERS) studies of the same material. A good agreement was found between the computational model of the vibrational spectrum of the adsorbate and the experimentally observed SERS. In general, aliphatic capping molecules are used to passivate the surface of Ag{sub 55} nanocrystals (55 = atomic number of Ag). In this study, a DFT simulation was employed to show binding energies and electron contour map analyses of Ag{sub 55} with PVA. Here we show that the PVA interacts with the Ag nanoparticle's surface, through the OH group, thereby contributing significantly to the increase in SERS activity.

36 MATERIALS SCIENCE↗

Enhancement of Fluorescence and Raman Scattering in Cyanine-Dye Molecules on the Surface of Silicon-Coated Silver Nanoparticles

A method of formation of a composite structure based on silver nanoparticles and a thin protective silicon film (AgNPs/Si) is developed. Enhancement of the fluorescence and Raman scattering in cyaninedye molecules deposited onto the formed nanostructure is observed. The optical properties and morphology stability of particles that are in contact with cyanine-dye solutions in organic solvents are studied. It is shown that the AgNPs/Si composite structure can be multiply used as an SERS-active surface.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Pulsed laser deposition of single layer, hexagonal boron nitride (white graphene, h-BN) on fiber-oriented Ag(111)/SrTiO{sub 3}(001)

We report on the growth of 1–10 ML films of hexagonal boron nitride (h-BN), also known as white graphene, on fiber-oriented Ag buffer films on SrTiO{sub 3}(001) by pulsed laser deposition. The Ag buffer films of 40 nm thickness were used as substitutes for expensive single crystal metallic substrates. In-situ, reflection high-energy electron diffraction was used to monitor the surface structure of the Ag films and to observe the formation of the characteristic h-BN diffraction pattern. Further evidence of the growth of h-BN was provided by attenuated total reflectance spectroscopy, which showed the characteristic h-BN peaks at ∼780 cm{sup −1} and 1367.4 cm{sup −1}. Ex-situ photoelectron spectroscopy showed that the surface of the h-BN films is stoichiometric. The physical structure of the films was confirmed by scanning electron microscopy. The h-BN films grew as large, sub-millimeter sheets with nano- and micro-sheets scattered on the surface. The h-BN sheets can be exfoliated by the micromechanical adhesive tape method. Spectral analysis was performed by energy dispersive spectroscopy in order to identify the h-BN sheets after exfoliation. The use of thin film Ag allows for reduced use of Ag and makes it possible to adjust the surface morphology of the thin film prior to h-BN growth.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ag-ZnO nanostructure for ANTA explosive molecule detection

Ag/ZnO nanostructure for surface enhanced Raman scattering application in the detection of ANTA explosive molecule is demonstrated. A highly rough ZnO microstructure was achieved by rapid thermal annealing of metallic Zn film. Different thickness Ag nanostructures are decorated over these ZnO microstructures by ion beam sputtering technique. Surface enhanced Raman spectroscopic studies carried out over Ag/ZnO substrates have shown three orders higher enhancement compared to bare Ag nanostructure deposited on the same substrate. The reasons behind such huge enhancement are discussed based on the morphology of the sample.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

BROADBAND X-RAY SPECTRAL INVESTIGATIONS OF MAGNETARS, 4U 0142+61, 1E 1841–045, 1E 2259+586, AND 1E 1048.1–5937

We have generated an extended version of a rather simplified but physically oriented three-dimensional magnetar emission model, STEMS3D, to allow spectral investigations up to 100 keV. We then applied our model to the broadband spectra of four magnetars: 4U 0142+61, 1E 1841–045, 1E 2259+586, and 1E 1048.1–5937, using data collected with Swift/XRT or XMM-Newton in soft X-rays, and the Nuclear Spectroscopic Telescope Array in the hard X-ray band. We found that the hard X-ray emission of 4U 0142+61 was spectrally hard compared to earlier detections, indicating that the source was likely in a transition to or from a harder state. We find that the surface properties of the four magnetars are consistent with what we have obtained using only the soft X-ray data with STEMS3D, implying that our physically motivated magnetar emission model is a robust tool. Based on our broadband spectral investigations, we conclude that resonant scattering of the surface photons in the magnetosphere alone cannot account for the hard X-ray emission in magnetars; therefore, an additional non-thermal process, or a population of relativistic electrons is required. We also discuss the implication of the non-detection of persistent hard X-ray emission in 1E 1048.1–5937.

79 ASTRONOMY AND ASTROPHYSICS↗

Amorphous iron-(hydr) oxide networks at liquid/vapor interfaces: In situ X-ray scattering and spectroscopy studies

Surface sensitive X-ray reflectivity (XR), fluorescence (XF), and grazing incidence X-ray diffraction (GIXD) experiments were conducted to determine the accumulation of ferric iron Fe (III) or ferrous iron Fe (II) under dihexadecyl phosphate (DHDP) or arachidic acid (AA) Langmuir monolayers at liquid/vapor interfaces. Analysis of the X-ray reflectivity and fluorescence data of monolayers on the aqueous subphases containing FeCl3 indicates remarkably high levels of surface-bound Fe (III) in number of Fe3þ ions per molecule (DHDP or AA) that exceed the amount necessary to neutralize a hypothetically completely deprotonated monolayer (DHDP or AA). These results suggest that nano-scale iron (hydr) oxide complexes (oxides, hydroxides or oxyhydroxides) bind to the headgroups and effectively overcompensate the maximum possible charges at the interface. The lack of evidence of in-plane ordering in GIXD measurements and strong effects on the surface-pressure versus molecular area isotherms indicate that an amorphous network of iron (hydr) oxide complexes contiguous to the headgroups is formed. Similar experiments with FeCl2 generally resulted with the oxidation of Fe (II)–Fe (III) which consequently leads to ferric Fe (III) complexes binding albeit with less iron at the interface. Controlling the oxidation of Fe (II) changes the nature and amount of binding significantly. The implications to biomineralization of iron (hydr) oxides are briefly discussed.

36 MATERIALS SCIENCE↗

Ab initio quantum scattering calculations and a new potential energy surface for the HCl( X 1Σ+)–O2(X3Σg−) system: Collision-induced line shape parameters for O2-perturbed R(0) 0–0 line in H35Cl

The remote sensing of abundance and properties of HCl—the main atmospheric reservoir of Cl atoms that directly participate in ozone depletion—is important for monitoring the partitioning of chlorine between “ozone-depleting” and “reservoir” species. Such remote studies require knowledge of the shapes of molecular resonances of HCl, which are perturbed by collisions with the molecules of the surrounding air. In this work, we report the first fully quantum calculations of collisional perturbations of the shape of a pure rotational line in H35Cl perturbed by an air-relevant molecule [as the first model system we choose the R(0) line in HCl perturbed by O2]. The calculations are performed on our new highly accurate HCl(X1Σ+)–O2(X3Σg−) potential energy surface. In addition to pressure broadening and shift, we also determine their speed dependencies and the complex Dicke parameter. This gives important input to the community discussion on the physical meaning of the complex Dicke parameter and its relevance for atmospheric spectra (previously, the complex Dicke parameter for such systems was mainly determined from phenomenological fits to experimental spectra and the physical meaning of its value in that context is questionable). We also calculate the temperature dependence of the line shape parameters and obtain agreement with the available experimental data. We estimate the total combined uncertainties of our calculations at 2% relative root-mean-square error in the simulated line shape at 296 K. This result constitutes an important step toward computational population of spectroscopic databases with accurate ab initio line shape parameters for molecular systems of terrestrial atmospheric importance.

Chemistry↗

Reactive scattering of H{sub 2} from metal surfaces under fast-grazing-incidence conditions

We have studied the interaction of molecular hydrogen with metal surfaces under fast-grazing-incidence conditions, by means of classical dynamics calculations based on density functional theory six-dimensional potential energy surfaces. We have performed calculations on two activated systems, H{sub 2}/NiAl(110) and H{sub 2}/Cu(111), and on two nonactivated systems, H{sub 2}/Pd(111) and H{sub 2}/Pd(110). We show that for rather open surfaces the computed 1-R probabilities (where R represents the reflectivity) as a function of the normal collision energy at grazing incidence (along low-Miller-index directions) mimic reasonably well the dissociative adsorption probabilities obtained at normal incidence and thermal energies from the dissociation threshold up to the saturation limit. Our results indicate that fast grazing incidence experiments could be used as complement to traditional sticking experiments at thermal energies to determine dissociative adsorption saturation limits, which are usually unreachable due to limitations in traditional molecular beam experiments

74 ATOMIC AND MOLECULAR PHYSICS↗