Search NASA⌕ Search

SEARCH · Search NASA

Results for “Behavior analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Substitution behavior of x(Na{sub 0.5}K{sub 0.5})NbO{sub 3}-(1 − x)BaTiO{sub 3} ceramics for multilayer ceramic capacitors by a near edge x-ray absorption fine structure analysis

The doping effect of (Na{sub 0.5}K{sub 0.5})NbO{sub 3} (NKN) as alternatives for rare-earth elements on the electrical properties of BaTiO{sub 3} has been investigated, in terms of their substitution behavior. The dielectric constant of a specimen with x = 0.05 was about 79% higher than that of pure BaTiO{sub 3}, and the temperature coefficient of capacitance was satisfied by the X7R specification. The specimen with x = 0.05 showed the lowest tetragonality among the four compositions and had a fine grain size of <2 μm. Although the addition of NKN decreased the specimen's tetragonality, the electrical properties were enhanced by the formation of defect dipoles and conduction electrons, which resulted from an acceptor and donor substitution behavior. Through O K-edge near edge x-ray absorption fine structure spectroscopy, the practical substitution behavior was defined by the change in Ti 3d orbital states. The energy separation of the Ti 3d orbitals was more apparent with the specimen of x = 0.05, which is related to the donor level from the donor substitution of Nb{sup 5+} ion for Ti-sites. Therefore, the simultaneous substitution of Na{sup +}/K{sup +} and Nb{sup 5+} ions into BaTiO{sub 3} can improve dielectric properties, based on the charge-transfer process.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Novel Equivalent Model of Active Distribution Networks Based on LSTM

Dynamic behaviors of distribution networks are of great importance for the power system analysis. Nowadays, due to the integration of the renewable energy generation, energy storage, plug-in electric vehicles, and distribution networks turn from passive systems to active ones. Hence, the dynamic behaviors of active distribution networks (ADNs) are much more complex than the traditional ones. The research interests how to establish an accurate model of ADNs in modern power systems are drawing a great deal of attention. In this paper, motivated by the similarities between power system differential algebraic equations and the forward calculation flows of recurrent neural networks (RNNs), a long short-term memory (LSTM) RNN-based equivalent model is proposed to accurately represent the ADNs. First, the adoption reasons of the proposed LSTM RNN-based equivalent model are explained, and its advantages are analyzed from the mathematical point of view. Then, the accuracy and generalization performance of the proposed model is evaluated using the IEEE 39-Bus New England system integrated with ADNs in the study cases. Here, it reveals that the proposed LSTM RNN-based equivalent model has a generalization capability to capture the dynamic behaviors of ADNs with high accuracy.

42 ENGINEERING↗

The Transition From Rebound to Bonding in High-Velocity Metallic Microparticle Impacts: Jetting-Associated Power-Law Divergence

A metallic microparticle impacting a metallic substrate with sufficiently high velocity will adhere, assisted by the emergence of jetting—the splash-like extrusion of solid matter at the periphery of the impact. In this work, we compare real-time observations of high-velocity single-microparticle impacts to an elastic–plastic model to develop a more thorough understanding of the transition between the regimes of rebound and bonding. We first extract an effective dynamic yield strength for copper from prior experiments impacting alumina spheres onto copper substrates. We then use this dynamic yield strength to analyze impacts of copper particles on copper substrates. We find that up to moderate impact velocities, impacts and rebound velocities follow a power-law behavior well-predicted on the basis of elastic-perfectly plastic analysis and can be captured well with a single value for the dynamic strength that subsumes many details not explicitly modeled (rate and hardening effects and adiabatic heating). However, the rebound behavior diverges from the power-law at higher impact velocities approaching bonding, where jetting sets on. This divergence is associated with additional lost kinetic energy, which goes into the ejection of the material associated with jetting and into breaking incipient bonds between the particle and substrate. These results further support and develop the idea that jetting facilitates bonding where a critical amount of bond formation is required to effect permanent particle deposition and prevent the particle from rebounding.

36 MATERIALS SCIENCE↗

A spectral analysis of the domain decomposed Monte Carlo method for linear systems

The domain decomposed behavior of the adjoint Neumann-Ulam Monte Carlo method for solving linear systems is analyzed using the spectral properties of the linear oper- ator. Relationships for the average length of the adjoint random walks, a measure of convergence speed and serial performance, are made with respect to the eigenvalues of the linear operator. In addition, relationships for the effective optical thickness of a domain in the decomposition are presented based on the spectral analysis and diffusion theory. Using the effective optical thickness, the Wigner rational approxi- mation and the mean chord approximation are applied to estimate the leakage frac- tion of random walks from a domain in the decomposition as a measure of parallel performance and potential communication costs. The one-speed, two-dimensional neutron diffusion equation is used as a model problem in numerical experiments to test the models for symmetric operators with spectral qualities similar to light water reactor problems. We find, in general, the derived approximations show good agreement with random walk lengths and leakage fractions computed by the numerical experiments.

97 MATHEMATICS AND COMPUTING↗

Laboratory simulations of prebiotic molecule stability in the jarosite mineral group; end member evaluation of detection and decomposition behavior related to Mars sample return

Recently, the prebiotic amino acid glycine has been found associated with natural jarosite samples from various locations around the world. Since the discovery of jarosite on Mars, extensive research focuses on linking this mineral group with possible detection of biosignatures in the geologic record on Earth and Mars. Multiple analytical methods, including extraction and mass spectrometry techniques have identified glycine and other biomolecules in jarosite samples. The jarosite end members jarosite (sensu stricto-potassium jarosite), natrojarosite (sodium jarosite), and ammoniojarosite (ammonium jarosite) have different thermodynamic stabilities, decompose at different rates, and have potentially different susceptibilities to substitution. Planetary protection issues have led to the suggestion that samples returned from Mars would need to be heat-treated before they could be analyzed on Earth. Although heat treatment of the samples would in theory destroy any potential biosignatures, valuable information can be obtained during thermal treatment by employing gravimetric techniques. The relationship between the thermodynamic stability of the jarosite end members and the effect that glycine has on the thermal decomposition behavior of each end member was investigated using thermal gravimetric analysis. Thermal gravimetric analysis has been suggested as a method capable of providing the heat treatment necessary to provide planetary protection while still providing useful information about the original state and composition of the potentially returned materials. Introducing glycine into the synthesis procedure of the potassium, sodium and ammonium jarosite end-member has elucidated the effects that glycine has on the thermal stability of the mineral group. Potassium jarosite appears to be the least susceptible to the effects of glycine, with the sodium and ammonium end members showing marked changes in thermal decomposition behavior and decomposition rates. In addition, these results suggest that the sodium and ammonium jarosites are more suitable targets for identifying signs of prebiotic or biotic activity on Mars and Earth than the potassium jarosites. Additional support for these conclusions was provided by powder X-ray diffraction and Laser Desorption-Fourier Transform Mass Spectrometry analysis of the end member samples synthesized in the presence of glycine.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetic interactions in new fluorite-related rare earth oxides LnLn’{sub 2}RuO{sub 7} (Ln, Ln’=rare earths)

New fluorite-related quaternary rare earth oxides Pr{sub 2}YRuO{sub 7} and La{sub 2}TbRuO{sub 7} have been prepared. They crystallize in an orthorhombic superstructure of cubic fluorite with space group Cmcm. Through magnetic susceptibility and specific heat measurements, Pr{sub 2}YRuO{sub 7} shows an antiferromagnetic transition at 27 K, which is considerably lowered compared with that for Pr{sub 3}RuO{sub 7}. Analysis of the magnetic specific heat indicates that the magnetic behavior observed at 27 K for Pr{sub 2}YRuO{sub 7} is predominantly due to the magnetic interactions between Ru ions, and that the interactions between the Pr{sup 3+} and Ru{sup 5+} ions are also important. La{sub 2}TbRuO{sub 7} shows magnetic ordering at 9.0 K, which is ascribed to the magnetic ordering between Ru{sup 5+} ions from the analysis of the magnetic specific heat data. - Graphical abstract: New fluorite-related quaternary rare earth oxides Pr{sub 2}YRuO{sub 7} and La{sub 2}TbRuO{sub 7} have been prepared. Through magnetic susceptibility and specific heat measurements, Pr{sub 2}YRuO{sub 7} and La{sub 2}TbRuO{sub 7} show an antiferromagnetic transition at 27 and 9.0 K, respectively. Display Omitted - Highlights: • New fluorite-related quaternary rare earth oxides LnLn’{sub 2}RuO{sub 7} have been prepared. • Pr{sub 2}YRuO{sub 7} shows an antiferromagnetic transition at 27 K. • La{sub 2}TbRuO{sub 7} shows magnetic ordering at 9.0 K. • Their magnetic exchange mechanism has been elucidated by the magnetic entropy change.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of B 2 O 3 on the Growth, Structural, and Magneto-Optical Properties of Yttrium Iron Garnet Single-Crystal Fibers

This study explores the fabrication of yttrium iron garnet (YIG) single crystal fibers using the laser heated pedestal growth (LHPG) method with the experimental addition of B 2 O 3 . The incorporation of B 2 O 3 facilitates the fiber fabrication process by lowering the required growth temperatures and likely modifying melt viscosity behavior, consistent with the established fluxing behavior of B2O3 and the comparative viscosity trend observed in the TMA−VFT analysis, thereby improving process efficiency while maintaining fiber quality. Structural characterization using EBSD and SC-XRD reveals a transition from polycrystalline to single-crystal behavior, with improved alignment along the [111] direction without altering the garnet structure. Magnetic measurements show increases in saturation magnetization in B 2 O 3 -assisted fibers. Three-dimensional anisotropy energy modeling, based on EBSD-derived Euler angles, indicates that the enhanced crystallinity and orientation contribute to reorientation of MCA energy distribution due to improved crystallographic alignment. Faraday rotation measurements show that the B 2 O 3 -assisted sample exhibits a rotation angle closer to reported values for high-quality YIG, suggesting improved phase purity and crystallographic quality. These findings demonstrate that B 2 O 3 -assisted LHPG growth is a scalable and nontoxic approach to producing high-performance YIG fibers for integrated photonic and magnetic field sensing applications.

Crystal structure↗

Profiling the Usage of an Extreme-Scale Archival Storage System

Profiling the archival storage system in scientific computing environments has received much less attention compared to the parallel file system, but is equally important since it stores the final data products safely, for a long duration. In this paper, we analyze eight years worth of data transfer logs for accessing the archival file system (HPSS) in the Oak Ridge Leadership Computing Facility (OLCF), which has been hosting the world's largest supercomputers and file systems. Our analysis encompasses about 135 million data transfer activities to the 80 PB High Performance Storage System (HPSS), between 2010 and 2017. We analyze the logs from several dimensions, including studying the workload characteristics (e.g., access patterns, frequency of accesses and temporal behavior), file system characteristics (e.g., directory depth, file system scaling trends, file types), and scientific user behavior (e.g., domain-specific usage and organization). Based on the analysis, we derive insights into the future evolution of the archive in terms of provisioning, desired features and functionality from the archive software, role and right sizing of the archive tiers, quota management, and the importance of smart and efficient metadata and storage management. We believe our study will prove useful for both operating current archival storage and better provisioning future systems.

Sim, Hyogi↗

The Role of Structural and Compositional Heterogeneities in the Insulator-to-Metal Transition in Hole-Doped APd 3 O 4 (A = Ca, Sr)

The cubic semiconducting compounds APd 3 O 4 (A = Ca, Sr) can be hole-doped by Na substitution on the A site and driven toward more conducting states. This process has been followed here by a number of experimental techniques to understand the evolution of electronic properties. While an insulator-to-metal transition is observed in Ca 1–x Na x Pd 3 O 4 for x ≥ 0.15, bulk metallic behavior is not observed for Sr 1–x Na x Pd 3 O 4 up to x = 0.20. Given the very similar crystal and (calculated) electronic structures of the two materials, the distinct behavior is a matter of interest. We present evidence of local disorder in the A = Sr materials through the analysis of the neutron pair distribution function, which is potentially at the heart of the distinct behavior. Solid-state 23 Na nuclear magnetic resonance studies additionally suggest a percolative insulator-to-metal transition mechanism, wherein presumably small regions with a signal resembling metallic NaPd 3 O 4 form almost immediately upon Na substitution, and this signal grows monotonically with substitution. Here, some signatures of increased local disorder and a propensity for Na clustering are seen in the A = Sr compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of Complex Interactions at the Gas–Solid Interface with in Situ Spectroscopy: The Case of Nitrogen-Functionalized Carbon

Interactions at the gas-solid interface drive physicochemical processes in many energy and environmental applications; yet, the challenges associated with characterization and development of these dynamic interactions in complex systems limit progress in developing effective materials. Thus, structure-property-performance correlations greatly depend on the development of advanced techniques and analysis methods for the investigation of gas-solid interactions. In this work, adsorption behavior of O 2 and humidified O 2 on nitrogen-functionalized carbon (N-C) materials was investigated to provide a better understanding of the role of nitrogen species in the oxygen reduction reaction (ORR). N-C materials were produced by solvothermal synthesis and N-ion implantation, resulting in a set of materials with varied nitrogen amount and speciation in carbon matrices with different morphologies. Adsorption behavior of the N-C samples was characterized by in situ diffuse reflectance infrared Fourier-transform spectroscopy (DRIFTS) and ambient pressure X-ray photoelectron spectroscopy (AP-XPS) experiments. A novel analysis approach for the interpretation of AP-XPS data was developed, allowing both the determination of overall adsorption behavior of each N-C material and identification of which nitrogen species were responsible for adsorption. The complementary information provided by in situ DRIFTS and AP-XPS suggests that O 2 adsorption primarily takes place on either electron-rich nitrogen species like pyridine, hydrogenated nitrogen species, or graphitic nitrogen. Adsorption of O 2 and H 2 O occurs competitively on solvothermally prepared N-Cs, whereas adsorption of H 2 O and O 2 occurs at different sites on N-ion implanted N-Cs, highlighting the importance of tuning the composition of N-C materials to promote the most efficient ORR pathway.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Micromechanical response of SiC-OPyC layers in TRISO fuel particles

Tristructural isotropic (TRISO)–coated particle fuel is a proposed fuel for multiple advanced reactor concepts. The performance of the particle depends on whether the silicon carbide (SiC) layer remains intact to prevent the release of metallic and gaseous fission products. Mechanical fracture of the SiC layer is a potential failure mode under various fuel configurations and operating environments, including the potential transmission of matrix-originating cracks through TRISO particles. Furthermore, this study uses instrumented indentation techniques on cross-sectioned surrogate particles to examine the mechanical stability of the critical interface between SiC and the outer pyrolytic carbon (OPyC) layer. The observed behavior at the interface is rationalized by examining the radially dependent fracture behavior of the SiC layer and performing a numerical analysis to quantify the residual stresses that develop during the processing and cross-sectioning of the as-fabricated particle. Characterizing the SiC-OPyC interface of surrogate TRISO particles using nanoindentation provides unique insight into the interface's room-temperature residual stress and mechanical stability. The modeling efforts were used to investigate the experimental procedure further, and the results are presented herein to validate this fuel form's potential mechanical failure modes.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Developing Data-Driven Synthetic Infrastructure Models for Resilience Analysis

Research on infrastructure resilience has produced promising methods to simulate and optimize complex networks to improve performance. However, restrictions on sharing infrastructure models and the steep cost of developing and maintaining infrastructure models presents a roadblock to adoption. To overcome this limitation, this research focuses on methods to create data-driven infrastructure models that will help improve infrastructure resilience and security. The analysis couples incomplete utility data, geospatial data, machine learning, and synthetic network generation methods to rapidly develop and update infrastructure models. The methods are validated using realistic utility models and site-specific data, with a focus on Puerto Rico due to its unique infrastructure challenges and available data. This research highlights promising opportunities for the use of synthetic network generation and machine learning to create infrastructure models when very little data is available. Results demonstrate that hybrid methods, which combine sparse utility data with synthetic models, can enhance model accuracy, and machine learning can predict model attributes using training data from other models. However, the complexity of infrastructure systems means that even minor changes in network connectivity can significantly impact simulation results. Resilience analysis using synthetic infrastructure models shows that while some system behaviors are preserved, the magnitude of disruptions may not be accurately represented, indicating the need for more research and validation before using synthetic models for critical infrastructure investment decisions. The framework outlined in this report represents a significant advance to infrastructure model development and could be applied to additional domains and sites. Future research will continue to streamline and validate methods to help reduce roadblocks to resilience analysis.

24 POWER TRANSMISSION AND DISTRIBUTION↗

The synthesis and air oxidation behavior of U-Si-Al and U-Si-B compositions

Uranium silicide intermetallic compounds are currently under investigation by the DOE-NE Advanced Fuels Campaign as candidate accident tolerant nuclear fuel concepts for light water reactors. While many U-Si compounds offer benefits compared to reference UO{sub 2} in terms of heavy metal density and thermal conductivity, they have been shown to display poor resistance to oxidizing atmospheres above 400 Celsius degrees. The general oxidation behavior of all U-Si compounds is oxidation of uranium; formation of UO{sub 2} followed by U{sub 3}O{sub 8} leads to rapid pulverization of the material. It is hypothesized that introducing an additional compositional degree of freedom by exploring U-Si-X (X=Al or B) ternary systems may provide the means to design a candidate nuclear fuel which optimizes the benefits of each binary. Phase analysis and preliminary oxidation testing were performed on four compositions containing alloying additions to U{sub 3}Si{sub 2} and U{sub 3}Si{sub 5}. Aluminum additions to U{sub 3}Si{sub 2} were observed to increase the oxidation resistance by delaying the onset of oxidation during synthetic air ramp testing. U{sub 3}Al{sub 2}Si{sub 3} delayed the onset of oxidation to T>650 C. degrees. During a 10 hour isothermal hold at 400 C. degrees in air the compound gained very little mass, indicating that it could be stable at reactor operating temperatures. Further analysis of this material is necessary to determine its oxidation behavior in steam and determine the specific mechanism that is providing the delayed oxidation. Boron additions to U{sub 3}Si{sub 5} do not appear to provide any additional oxidation resistance to the compound as tested in this work. The 1.67 at.% addition of B produced primarily single-phase composition. Melting and sintering studies followed by further compositional and thermal analyses are required to advance this composition as a candidate composite fuel additive. Lastly, the nominally U{sub 3}BSi{sub 4} composition produced a multi-phase system which provided no additional oxidation resistance following either a synthetic air ramp oxidation test or a pre-passivation isothermal hold at 800 C. degrees.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Assessment of Edge Turbulence and Convective Transport through Velocity Field Analysis

Over the course of this grant period, we have conducted three major studies, each of which has resulted in a primary publication (described below): First, we investigated the flow and shear behavior of the edge plasma and scrape-off layer (SOL) in NSTX using the GPI diagnostic. Calculation of local, time resolved velocity maps using the hybrid optical flow and pattern matching velocimetry code enabled analysis of turbulent flow and shear behavior in these plasmas. Second, we used GPI measurements made during RF heated H-mode operation, to identify intermittent periodic edge intensity fluctuations which precede ELMs and ELM-induced back transitions from H-mode to Lmode. These edge oscillations have a well-defined mode structure and are visible up to 100-200 μs preceding the ELM events. Finally, we performed an in-depth investigation between the fluctuation measurements made by the GPI and BES diagnostics on NSTX.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of different thickness crystalline SiC buffer layers on the ordering of MgB{sub 2} films probed by extended x-ray absorption fine structure

Extended X-ray absorption fine structure (EXAFS) spectroscopy is a powerful method to investigate the local structure of thin films. Here, we have studied EXAFS of MgB{sub 2} films grown on SiC buffer layers. Crystalline SiC buffer layers with different thickness of 70, 100, and 130 nm were deposited on the Al{sub 2}O{sub 3} (0001) substrates by using a pulsed laser deposition method, and then MgB{sub 2} films were grown on the SiC buffer layer by using a hybrid physical-chemical vapor deposition technique. Transition temperature of MgB{sub 2} film decreased with increasing thickness of SiC buffer layer. However, the T{sub c} dropping went no farther than 100 nm-thick-SiC. This uncommon behavior of transition temperature is likely to be created from electron-phonon interaction in MgB{sub 2} films, which is believed to be related to the ordering of MgB{sub 2} atomic bonds, especially in the ordering of Mg–Mg bonds. Analysis from Mg K-edge EXAFS measurements showed interesting ordering behavior of MgB{sub 2} films. It is noticeable that the ordering of Mg–B bonds is found to decrease monotonically with the increase in SiC thickness of the MgB{sub 2} films, while the opposite happens with the ordering in Mg–Mg bonds. Based on these results, crystalline SiC buffer layers in MgB{sub 2} films seemingly have evident effects on the alteration of the local structure of the MgB{sub 2} film.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Analysis of Silver Release from Furnace-Tested TRISO Particles

High temperature testing of intact TRISO particles previously irradiated in the AGR-5/6/7 experiment was performed in the Furnace for Irradiated TRISO Testing (FITT) to directly confirm diffusive release of silver and europium from intact TRISO particles. Testing was conducted from 1,100–1,600°C for exposure times up to 100 h to directly confirm silver through layer release below safety testing temperatures. The FITT analysis showed highest levels of silver release at 1,300–1,400°C which confirms athermal release behaviors previous observed in step-wise and transient safety tests. Additionally, release was non-uniform with some particles releasing a majority of their inventory while others did not appear to release silver under identical testing conditions, which was consistent with historic observations. An assessment of the effective silver diffusion coefficient in the SiC layer was conducted and indicated maximum values in the 1,300–1,400°C range. The magnitude of the calculated diffusion coefficients also exceeded currently accepted diffusion coefficients. The release behavior of europium from intact particles was also analyzed in FITT for at 1,450–1,550°C for 500 h to 750 h. Direct confirmation of europium release below safety testing temperatures was confirmed absent contributions from matrix release. The analysis indicated europium release follows a general Arrhenius behavior and suggests general uniform release and indicates irradiation conditions influence observed release response. Calculated diffusion kinetics agree well with historic experiments.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Decarbonizing the US Energy System

Recent rapid and unexpected cost reductions in decarbonization technologies have accelerated the cost-effective decarbonization of the US economy, with greenhouse gas (GHG) emissions falling by 20% from 2005 to 2020. The literature on US economy-wide decarbonization focuses on maximizing long-term GHG emissions reduction strategies that rely mostly on renewable energy expansion, electrification, and efficiency improvements to achieve net-zero GHG emissions by 2050. While these studies provide a valuable foundation, further research is needed to properly support decarbonization policy development and implementation. In this review, we identify key decarbonization analysis gaps and opportunities, including issues related to cross-sectoral linkages, spatial and temporal granularity, consumer behavior, emerging technologies, equity and environmental justice, and political economy. We conclude by discussing the implications of these analysis gaps for US decarbonization pathways and how they relate to challenges facing major global emitters.

08 HYDROGEN↗

Control of domain wall pinning by localised focused Ga {sup +} ion irradiation on Au capped NiFe nanowires

Understanding domain wall pinning and propagation in nanowires are important for future spintronics and nanoparticle manipulation technologies. Here, the effects of microscopic local modification of the magnetic properties, induced by focused-ion-beam intermixing, in NiFe/Au bilayer nanowires on the pinning behavior of domain walls was investigated. The effects of irradiation dose and the length of the irradiated features were investigated experimentally. The results are considered in the context of detailed quasi-static micromagnetic simulations, where the ion-induced modification was represented as a local reduction of the saturation magnetization. Simulations show that domain wall pinning behavior depends on the magnitude of the magnetization change, the length of the modified region, and the domain wall structure. Comparative analysis indicates that reduced saturation magnetisation is not solely responsible for the experimentally observed pinning behavior.

77 NANOSCIENCE AND NANOTECHNOLOGY↗