Search NASA⌕ Search

SEARCH · Search NASA

Results for “Colloidal particles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Reversible to irreversible transitions for cyclically driven particles on periodic obstacle arrays

Here, we examine the collective dynamics of disks moving through a square array of obstacles under cyclic square wave driving. Below a critical density, we find that the system organizes into a reversible state in which the disks return to the same positions at the end of every drive cycle. Above this density, the dynamics are irreversible and the disks do not return to the same positions after each cycle. The critical density depends strongly on the angle θ between the driving direction and a symmetry axis of the obstacle array, with the highest critical densities appearing at commensurate angles such as θ = 0° and θ = 45° and the lowest critical densities falling at θ = arctan (0.618), the inverse of the golden ratio, where the flow is the most degenerate. As the density increases, the number of cycles required to reach a reversible state grows as a power law with an exponent near ν = 1.36, similar to what is found in periodically driven colloidal and superconducting vortex systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Luminescence of CdS:Ag Quantum Dots in a Polymethacrylate Matrix

Semiconductor quantum dots (QDs) exhibit intense luminescence and reproduce optical characteristics. Doping with metal ions has a positive effect on their properties. Introduction of QDs into polymer matrices leads to the formation of a required morphology of composites. There is a problem in synthesis of optically transparent polymer composites containing QDs of the А{sup 2}В{sup 6} group that consists in the extremely low solubility of metal chalcogenides and most of their precursors in monomers. To solve this problem, we used colloidal synthesis. CdS QDs were synthesized by the method of appearing reagents in situ in methylmethacrylate (MMA). Doping with Ag{sup +} ions was performed by adding a silver salt into the reaction mixture during the synthesis of CdS QDs. The PMMA/CdS:Ag luminescent polymer glasses were synthesized by radical block polymerization of MMA. The transparency of the composites at wavelengths exceeding 500 nm reaches 92% (5 mm). The luminescence excitation is related to the interband electron transitions in CdS crystals. Luminescence in the range of 500–600 nm is observed due to electron relaxation via a system of levels in the band gap of doped CdS crystals. The positions and intensities of the spectral bands depend on the Ag{sup +} concentration, particle size, excitation wavelength, and other factors. The formation of Cd(Ag)S/Ag{sub 2}S structures at Ag{sup +} concentrations higher than 5.0 × 10{sup –3} mol/L quenches the luminescence.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Modeling and Simulation of Pore Scale Multiphase Fluid Flow and Reactive Transport in Fractured and Porous Media

In the subsurface fluids play a critical role by transporting dissolved minerals, colloids and contaminants (sometimes over long distances), by mediating dissolution and precipitation processes and enabling chemical transformations in solution and at mineral surfaces. Although the complex geometries of fracture apertures, fracture networks and pore spaces may make it difficult to accurately predict fluid flow in saturated (single-phase) subsurface systems, well developed methods are available. The simulation of multiphase fluid flow in the subsurface is much more challenging because of the large density and/or viscosity ratios found in important applications (water/air in the vadose zone, water/oil, water/gas, gas/oil and water/oil/gas in oil reservoirs, water/air/non-aqueous phase liquids (NAPL) in contaminated vadose zone systems and gas/molten rock in volcanic systems, for example). In addition, the complex behavior of fluid-fluid-solid contact lines, and its impact on dynamic contact angles, must also be taken into account, and coupled with the fluid flow. Pore network models and simple statistical physics based models such as the invasion percolation and diffusion-limited aggregation models have been used quite extensively. However, these models for multiphase fluid flow are based on simplified models for pore space geometries and simplified physics. Other methods such a lattice Boltzmann and lattice gas models, molecular dynamics, Monte Carlo methods, and particle methods such as dissipative particle dynamics and smoothed particle hydrodynamics are based more firmly on first principles, and they do not require simplified pore and/or fracture geometries. However, they are less (in some cases very much less) computationally efficient that pore network and statistical physics models. Recently a combination of continuum computation fluid dynamics, fluid-fluid interface tracking or capturing and simple models for the dependence of contact angles on fluid velocity at the contact line has been used to simulate multiphase fluid flow in fracture apertures, fracture networks and pore spaces. Fundamental conservation principles - conservation of momentum, and conservation of mass (or conservation of volume for incompressible fluids) and conservation of energy, as well as symmetries (Galilean invariance and isotropy) are central to the physics of fluids and the models used to simulate them. In molecular and mesoscale models observance of these conservation principles and symmetries at the microscopic level leads to macroscopic fluid dynamics that can be represented by the Navier Stokes equation. The remarkable fact that the flow of all simpe fluids, irrespective of their chemical nature, can be described by the Navier-Stokes equation is a result of these conservation principles and symmetries acting on the molecular level.

99 GENERAL AND MISCELLANEOUS↗

Low-Density 2D Superlattices Assembled via Directional DNA Bonding

It is critical to assemble nanoparticles (NPs) into superlattices with controlled symmetries and spacings on substrates for metamaterials applications, where such structural parameters dictate their properties. Here, we use DNA to assemble anisotropic NPs of three shapes-cubes, octahedra, and rhombic dodecahedra-on substrates and investigate their thermally induced reorganization into two-dimensional (2D) crystalline films. We report two new low-density 2D structures, including a honeycomb lattice based on octahedral NPs. The low-density lattices favored here are not usually seen when particles are crystallized via other bottom-up assembly techniques. Furthermore, we show that, consistent with the complementary contact model, a primary driving force for crystallization is the formation of directional, face-to-face DNA bonds between neighboring NPs and between NPs and the substrate. Finally, our results can be used to deliberately prepare crystalline NP films with novel morphologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Controlled Self-Assembly and Tuning of Large PbS Nanoparticle Supercrystals

Self-assembly of colloidal nanocrystals (NCs) into ordered superlattices (SLs) and supercrystals (SCs) enables new artificial NC solids for nanoelectronic and nanophotonic applications, which requires critical control of nucleation and growth conditions. In this paper, large SCs of PbS NCs up to ~100 μm size were synthesized by two controlled self-assembly methods from NC solutions. Both translational symmetry and orientational ordering of the nanocrystals in the SCs were readily tuned by excess oleic acid ligands and antisolvents. Slow evaporation and the counterdiffusion method of solvents resulted in the formation of single SCs with two different SLs from the same PbS NCs: a face-centered cubic SL with weak yet complex orientational order or a body-centered cubic SL with strong and uniform particle orientation, respectively. The translational ordering was mainly determined by the effective shape of the NCs while the difference in orientational order was a result of the balance between ligand–ligand attraction and rotational entropy. Finally, the ease of the growth of large SC solids could lead to diverse NC systems and facilitate essential investigation of nanoparticle interactions and coupling based nanoelectronic and nanophotonic properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interdisciplinary research with complex plasmas

In this topical review we combine results of research from the field of complex plasmas and colloidal dispersions. This research has opened the way to study strong coupling phenomena in real space and time at the most fundamental kinetic level. The physics of complex plasmas is dominated by the dynamics of slow moving and individually visible microparticles. In contrast to colloidal suspensions, where the fluid background medium results in huge overdamping, the neutral gas background medium in complex plasmas introduces only very little damping so that processes at all relevant time scales can be studied. This is of particular importance for some of the most outstanding questions in the self-organization of matter and critical phenomena.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

pH‐Responsive Relaxometric Behaviour of Coordination Polymer Nanoparticles Made of a Stable Macrocyclic Gadolinium Chelate

Abstract Lanthanide‐containing nanoscale particles have been widely explored for various biomedical purposes, however, they are often prone to metal leaching. Here we have created a new coordination polymer (CP) by applying, for the first time, a stable Gd III chelate as building block in order to prevent any fortuitous release of free lanthanide(III) ion. The use of the Gd‐DOTA‐4AmP complex as a design element in the CP allows not only for enhanced relaxometric properties (maximum r 1 =16.4 m m −1 s −1 at 10 MHz), but also for a pH responsiveness (Δ r 1 =108 % between pH 4 and 6.5), beyond the values obtained for the low molecular weight Gd‐DOTA‐4AmP itself. The CP can be miniaturised to the nanoscale to form colloids that are stable in physiological saline solution and in cell culture media and does not show cytotoxicity.

Aríñez‐Soriano, Javier↗

Mechanistic Exploration of Dodecanethiol-Treated Colloidal CsPbBr 3 Nanocrystals with Photoluminescence Quantum Yields Reaching Near 100%

Metal halide perovskite nanocrystals (NCs) are attractive materials for optoelectronics. However, further improvements in stability, reproducibility, and photoluminescence quantum yield (Φ PL ) are essential for enabling future applications. Inadequate surface passivation is a major cause of instability, irreproducibility, and less than unity Φ PL . Herein, we probe the influence of multiple ligand binding groups on the colloidal stability and Φ PL of CsPbBr 3 nanocrystals (NCs). Here, we find that post-synthetic treatment with dodecanethiol reproducibly yields highly stable NCs with near-unity Φ PL for a range of synthetic conditions and initial Φ PL of the as-synthesized NCs. A mechanistic investigation shows that thiol addition leads to thioether formation via the thiol–ene reaction with octadecene, oleic acid, and oleylamine. Both thiolates and thioethers are suspected to bind to undercoordinated Pb atoms on the NC surfaces, and this surface binding can be rapidly accelerated through exposure to blue or UV light. Furthermore, we show that metallic Pb nanoparticles appear in many batches of synthesized CsPbBr 3 NCs and that dodecanethiol addition eliminates these metallic Pb particles.

14 SOLAR ENERGY↗

Mapping Structure and Rheology of pH-Responsive Resins for Low-VOC Coatings

In recent years, the paint and coatings industry has shifted away from traditional resin formulations that require high concentrations of volatile organic compounds (VOCs) to achieve the desired rheological performance and sustainability targets. One approach to eliminate or reduce VOCs in paint and coating formulations while maintaining the final performance is to disperse stimuli-responsive polymer latex particles in water. The chemistry and architecture of these particles have been engineered such that the suspension rheology changes in response to the pH changes. The particles can also be swollen with organic solvents to illicit similar rheological changes. To understand how the particle microstructure influences the observed macroscopic properties, we use small-angle neutron scattering and dynamic light scattering to determine that these particles consist of a cross-linked core with long polymer tails that extend into the dispersing medium. Carboxylic acid groups present on the tails deprotonate with increasing pH, and the extension of the polymer chain due to charge repulsion increases the hydrodynamic drag on the particle. Here we find that adjusting the pH alone has a much more significant effect on the shear dependence of the viscosity of the studied resin than adding organic solvent alone. We also find that this resin architecture is more responsive per mole of pH-responsive group than other architectures of pH-responsive latex particles in the literature.

36 MATERIALS SCIENCE↗

Zinc oxide based diluted magnetic semiconductor nanoparticles: Synthesis by laser ablation in liquids, microstructural and optical properties

Nanoparticles of ZnO and ZnO doped with transition metals (Mn, Co) were synthesized by laser ablation in liquid medium. Scanning electron microscopy (SEM) showed formation of nanostructures with different shapes. Atomic force microscopy (AFM) gives information about surface morphology of the formed nanostructures. Absorption edge of ZnO, ZnO:Mn and ZnO:Co colloidal nanoparticles exhibits blue shift due to confinement effect. In photoluminescence spectra three peaks are attributed to the band-edge transitions and defect states. The Faraday rotation in ZnO:Mn nanoparticles gives evidence for paramagnetic behavior at room temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Reconfigurable structure and tunable transport in synchronized active spinner materials

Ensembles of actuated colloids are excellent model systems to explore emergent out-of-equilibrium structures, complex collective dynamics, and design rules for the next generation materials. Here, we demonstrate that ferromagnetic microparticles suspended at an air-water interface and energized by an external rotating magnetic field spontaneously form dynamic ensembles of synchronized spinners in a certain range of the excitation field parameters. Each spinner generates strong hydrodynamic flows, and collective interactions of the multiple spinners promote a formation of dynamic lattices. On the basis of experiments and simulations, we reveal structural transitions from liquid to nearly crystalline states in this novel active spinner material and demonstrate that dynamic spinner lattices are reconfigurable, capable of self-healing behavior and that the transport of embedded inert cargo particles can be remotely tuned by the parameters of the external excitation field. Our findings provide insights into the behavior of active spinner materials with reconfigurable structural order and tunable functionalities.

36 MATERIALS SCIENCE↗

A Pilot Study of Uterine Artery Embolization with Tris-Acryl Gelatin Microspheres in Guinea Pigs

Objective: This study was designed to establish guinea pigs as an animal model for uterine artery embolization (UAE) with tris-acryl gelatin microspheres (TAGM). Methods: Twenty-five female adult guinea pigs were randomly divided into two groups, including a uterine artery casting mould group (n = 10) and a UAE group (n = 15). Pelvic angiography and vascular casting mould were performed in the first group. The anatomical characters of the pelvic cavity in guinea pigs were described. In the second group, the technical feasibility of performing UAE with TAGM in guinea pigs was investigated. The histopathological slides of the uterus of guinea pigs after UAE were examined to inspect the outcomes of UAE. Results: The uterine artery springs from the internal iliac artery, ascends tortuously along the cervix, and gives off vertically 8-10 branches to the cervix uteri and uterine horns. The diameters of the trunk of the uterine artery and its first branch were 0.32 {+-} 0.027 mm and 0.14 {+-} 0.01 mm, respectively. For UAE animals, the dosages of 40-120 and 100-300 {mu}m TAGM were 0.033 {+-} 0.003 ml and 0.015 {+-} 0.002 ml, respectively. On histopathological slides, embosphere particles were found in the first branches of the uterine artery, the subserous arteries, and the intramural arteries. Inflammatory reactions in the uterus were common in guinea pigs after UAE. Local or dispersed areas of necrosis in uterus also were observed in a few guinea pigs. Conclusions: Guinea pigs are an appropriate and feasible model for UAE with TAGM.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

New observations on the mechanism of lithium nitrate against alkali silica reaction (ASR)

In the current study, in order to elucidate the mechanisms for the favorable effects of lithium nitrate in controlling alkali silica reaction (ASR), vycor glass disk immersion specimens and glass disk-cement paste sandwich specimens were prepared and examined by XRD, SEM and Laser Ablation Induction Coupled Plasma Mass Spectrometry (LA-ICP-MS). Results showed that when glass disk was immersed in only NaOH solution, the glass was attacked by hydroxyl ions but no solid reaction product was found, thus the presence of calcium was essential for the formation of ASR gel. In the presence of lithium, the glass surface was covered by a thick layer of Li-Si crystal. With the addition of Ca(OH){sub 2}, the glass surface was completely covered by Li-Si crystal and a lithium-bearing low Ca-Na-(K)-Si gel. These two phases either form a dense matrix with Li-Si crystal serving as the framework, and the gel filling in the void space, or the Li-Si crystal serving as the foundation to completely cover the entire reactive SiO{sub 2} surface, and the gel sitting on top of these crystal particles. Hence, the suppressive effects of LiNO{sub 3} were attributed to the formation of a layer of Li-Si crystals intimately at the reactive SiO{sub 2} particle surface and the formation of Li-bearing low-Ca ASR gel products. The Li-bearing low-Ca ASR gels may have a dense and rigid structure, thus having low capacity to absorb moisture from the surrounding paste, and exhibiting a non-swelling property.

36 MATERIALS SCIENCE↗

Chemical Insights into the Formation of Colloidal Iridium Nanoparticles from In Situ X-ray Total Scattering: Influence of Precursors and Cations on the Reaction Pathway

Iridium nanoparticles are important catalysts for several chemical and energy conversion reactions. Studies of iridium nanoparticles have also been a key for the development of kinetic models of nanomaterial formation. However, compared to other metals such as gold or platinum, knowledge on the nature of prenucleation species and structural insights into the resultant nanoparticles are missing, especially for nanoparticles obtained from Ir$_x$Cl$_y$ precursors investigated here. We use in situ X-ray total scattering (TS) experiments with pair distribution function (PDF) analysis to study a simple, surfactant-free synthesis of colloidal iridium nanoparticles. The reaction is performed in methanol at 50 °C with only a base and an iridium salt as precursor. From different precursor salts–IrCl 3 , IrCl 4 , H 2 IrCl 6 , or Na 2 IrCl 6 –colloidal nanoparticles as small as Ir ~55 are obtained as the final product. The nanoparticles do not show the bulk iridium face-centered cubic ($fcc$) structure but show decahedral and icosahedral structures. The formation route is highly dependent on the precursor salt used. Using IrCl 3 or IrCl 4 , metallic iridium nanoparticles form rapidly from Ir$_x$Cl$_y$$^{n–}$ complexes, whereas using H 2 IrCl 6 or Na 2 IrCl 6 , the iridium nanoparticle formation follows a sudden growth after an induction period and the brief appearance of a crystalline phase. With H 2 IrCl 6 , the formation of different Ir$_n$ ($n$ = 55, 55, 85, and 116) nanoparticles depends on the nature of the cation in the base (LiOH, NaOH, KOH, or CsOH, respectively) and larger particles are obtained with larger cations. As the particles grow, the nanoparticle structure changes from partly icosahedral to decahedral. In conclusion, the results show that the synthesis of iridium nanoparticles from Ir$_x$Cl$_y$ is a valuable iridium nanoparticle model system, which can provide new compositional and structural insights into iridium nanoparticle formation and growth.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Observation of the Formation of the Dynamic Clusters in Concentrated Lysozyme Protein Solutions

Neutron spin echo (NSE) and small angle neutron scattering (SANS) are used to investigate the structure and short-time dynamics of lysozyme protein solutions with the presence of the equilibrium clusters. The Q dependent collective diffusion coefficient indicates there are no significant inter-monomeric-protein dynamics at high Q. Upon increasing the concentration, the self diffusion coefficient at short-time limit is seen to decrease much faster than that of the hard-sphere and charge stabilized colloidal suspensions, further supporting the formation of clusters under the probed experimental conditions. These clusters are further argued to have finite life time instead of conglomerating permanently. Moreover, evidenced by the average hydrodynamic radius, at relatively low concentration, there are very few dynamical clusters, while at higher concentrations, the diffusion behavior at short-time limit is dominated by the dynamic clusters.

59 BASIC BIOLOGICAL SCIENCES↗

Introduction of biotin or folic acid into polypyrrole magnetite core-shell nanoparticles

In order to contribute to the trend in contemporary research to develop magnetic core shell nanoparticles with better properties (reduced toxicity, high colloidal and chemical stability, wide scope of application) in straightforward and reproducible methods new core shell magnetic nanoparticles were developed based on polypyrrole shells functionalized with biotin and folic acid. Magnetite nanoparticles stabilized by sebacic acid were used as magnetic cores. The morphology of magnetite was determined by transmission electron microscopy TEM, while the chemical structure investigated by FT-IR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Colloquium: Ice rule and emergent frustration in particle ice and beyond

Geometric frustration and the ice rule are two concepts that are intimately connected and widespread across condensed matter. The first refers to the inability of a system to satisfy competing interactions in the presence of spatial constraints. The second, in its more general sense, represents a prescription for the minimization of the topological charges in a constrained system. Both can lead to manifolds of high susceptibility and nontrivial, constrained disorder where exotic behaviors can appear and even be designed deliberately. This Colloquium describes the emergence of geometric frustration and the ice rule in soft condensed matter. It excludes the extensive developments of mathematical physics within the field of geometric frustration, but rather focuses on systems of confined microscopic or mesoscopic particles that emerge as a novel paradigm exhibiting spin degrees of freedom. In such systems, geometric frustration can be engineered artificially by controlling the spatial topology and geometry of the lattice, the position of the individual particle units, or their relative filling fraction. These capabilities enable the creation of novel and exotic phases of matter and also potentially lead toward technological applications related to memory and logic devices that are based on the motion of topological defects. The rapid progress in theory and experiments is reviewed and the intimate physical connections with other frustrated systems at different length scales are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Anomalous Growth Rate of Ag Nanocrystals Revealed by in situ STEM

In situ microscopy of colloidal nanocrystal growth offers a unique opportunity to acquire direct and straightforward data for assessing classical growth models. For this study, we observe the growth trajectories of individual Ag nanoparticles in solution using in situ scanning transmission electron microscopy. For the first time, we provide experimental evidence of growth rates of Ag nanoparticles in the presence of Pt in solution that are significantly faster than predicted by Lifshitz-Slyozov-Wagner theory. We attribute these observed anomalous growth rates to the synergistic effects of the catalytic properties of Pt and the electron beam itself. Transiently reduced Pt atoms serve as active sites for Ag ions to grow, thereby playing a key role in controlling the growth kinetics. Electron beam illumination greatly increases the local concentration of free radicals, thereby strongly influencing particle growth rate and the resulting particle morphology. Through a systematic investigation, we demonstrate the feasibility of utilizing these synergistic effects for controlling the growth rates and particle morphologies at the nanoscale. Our findings not only expand the current scope of crystal growth theory, but may also lead to a broader scientific application of nanocrystal synthesis.

36 MATERIALS SCIENCE↗