Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffraction pattern”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Structural, magnetic, and Mössbauer spectroscopy of Cu substituted M-type hexaferrites

Highlights: • Single BaM hexaferrite structural phases with Cu substations were prepared. • The magnetocrystalline anisotropy decreased with Cu substitution. • The coercivity was significantly modified while the magnetization remained high. • Hexaferrites with 0.2–0.4 Cu possess properties suitable for magnetic recording. • Ionic distributions from structural refinement agreed with Mössbauer spectroscopy. - Abstract: BaFe{sub 12−x}Cu{sub x}O{sub 19} hexaferrites were prepared using ball milling and sintering at 1100 °C. Refinement of the X-ray diffraction patterns was carried out to determine the structural parameters and the ionic distribution over the crystallographic sites. The preferential site occupation and valence state of Cu was consistent with the results obtained from the analysis of Mössbauer spectra. Further, the magnetic parameters of the samples were discussed in light of the structural and Mössbauer analyses. The magnetic phase transition temperature was found to decrease with the level of Cu substitution, in accordance with the reduction of the superexchange interactions. Further, the magnetic softening of the hexaferrite and the significant reduction in magnetocrystalline anisotropy with Cu substitution was consistent with the ionic distribution in the lattice. This study clearly demonstrated the feasibility of using a simple method to fabricate hexaferrites with a modified coercivity, while maintain the saturation magnetization high enough for practical applications.

36 MATERIALS SCIENCE↗

Photo-enhanced field emission characteristics of SnS{sub 2} nanosheets

In the present studies, we demonstrate a facile hydrothermal route to synthesize elegant SnS{sub 2} nanosheets. The x-ray diffraction pattern clearly revealed formation of SnS{sub 2} phase under the hydrothermal conditions. SEM and TEM analysis indicated formation of very thin SnS{sub 2} nanosheets. Field electron emission studies of the SnS{sub 2} nanosheets emitter were preformed at base pressure of 1×10{sup −8} mbar. The value of turn-on field, corresponding to an emission current density of ∼1 μA/ cm2, was found to be ∼ 4.6 V/μm. Interestingly, when the cathode was illuminated with visible light, it exhibited lower turn-on field of ∼ 4.2 V/μm, along with nearly 2.5 times enhancement in the emission current. Furthermore, the photo-enhanced emission characteristic shows a reproducible switching behavior. The photo-enhanced filed emission characteristics along with reproducible switching behaviour propose the SnS{sub 2} nanosheets emitter as a promising candidate for nano-optoelectronic devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of N{sub 2} + H{sub 2} gas mixtures in plasma nitriding on tribological properties of duplex surface treated steels

Thermo-reactive diffusion chromizing followed by pulsed plasma nitriding were carried out on AISI 52100 and 8620 bearing steels. The chromized samples were pulse-plasma nitrided for 5 h at 500 deg. C in various N{sub 2}-H{sub 2} gas mixtures. The coated steels were characterized using scanning electron microscopy, X-ray diffraction and microhardness testing. The unlubricated wear behaviors of only chromized and duplex treated steels were investigated in ball-on-disc system tests at room temperature. X-ray diffraction patterns of the duplex treated samples containing H{sub 2} indicated the formation of dominant CrN and Cr{sub 2}N nitrides as well as the formation of Cr{sub 3}C{sub 2} and Cr{sub 7}C{sub 3} carbides. Gas mixtures in the plasma nitriding, which was performed after chromizing, have a significant influence on the wear rate of the duplex treated steels. The wear and friction tests showed that the lowest friction coefficient and wear rates were observed for the samples duplex treated in a 50%N{sub 2} +50%H{sub 2} plasma. Conversely, the lowest wear resistance was observed on the samples duplex treated in a gas mixture of 75%N{sub 2} + 25%H{sub 2}, probably due to formation of a hard and brittle layer.

36 MATERIALS SCIENCE↗

Characterization of a wollastonite glass-ceramic material prepared using sugar cane bagasse ash (SCBA) as one of the raw materials

Glass-ceramic material prepared with sugar cane bagasse ash as one of the raw materials was characterized to determine some important properties for its application as a coating material. X-ray diffraction patterns showed that wollastonite-2M (CaSiO{sub 3}) was the major glass-ceramic phase. The Rietveld method was used to quantify the crystalline (60 wt.%) and vitreous (40 wt.%) phases in the glass-ceramic. The microstructure (determined by scanning electron microscopy) of this material had a marble appearance, showing a microporous network of elongated crystals with some areas with dendritic, feather-like ordering. Microhardness data gave a mean hardness value of 564.4 HV (Vickers-hardness), and light microscopy disclosed a greenish brown colored material with a vitreous luster. - Highlights: • We studied the properties of a glass-ceramic material obtained from sugarcane ash. • This material has the appearance and hardness of natural stones. • A refining method gave information about its amorphous and crystalline phases. • This material has potential to be used as coating plates for buildings.

36 MATERIALS SCIENCE↗

Structural and transport properties of double perovskite Dy{sub 2}NiMnO{sub 6}

Highlights: • Sol–gel citrate method is used to prepare the double perovskite Dy{sub 2}NiMnO{sub 6}. • Structure and dielectric relaxation of the sample are studied for nano and bulk phases. • The relaxation mechanism of the sample is modeled by Cole–Cole equation. • With increasing sintering temperature conductivity increases. • Electronic structures and magnetic properties have been studied by DFT calculations. - Abstract: The double perovskite oxide Dy{sub 2}NiMnO{sub 6} (DNMO) is synthesized in nano and bulk phase by the sol–gel citrate method. The Rietveld refinement of X-ray diffraction pattern of the sample at room temperature shows the monoclinic P2{sub 1}/n phase. Dielectric relaxation of the sample is investigated in the impedance and electric modulus formalisms in the frequency range from 50 Hz to 1 MHz and in the temperature range from 253 to 415 K. The Cole–Cole model is used to explain the relaxation mechanism in DNMO. The frequency-dependent maxima in the imaginary part of impedance are found to obey an Arrhenius law with activation energy of 0.346 and 0.344 eV for nano and bulk DNMO, respectively. A significant increase in conductivity of bulk DNMO has been observed than that of the nanoceramic. Electronic structures and magnetic properties of DNMO have been studied by performing first principles calculation based on density functional theory.

36 MATERIALS SCIENCE↗

Visualizing Water Molecules in Transmembrane Proteins Using Radiolytic Labeling Methods

Essential to cells and their organelles, water is both shuttled to where it is needed and trapped within cellular compartments and structures. Moreover, ordered waters within protein structures often colocalize with strategically placed polar or charged groups critical for protein function, yet it is unclear if these ordered water molecules provide structural stabilization, mediate conformational changes in signaling, neutralize charged residues, or carry out a combination of all these functions. Structures of many integral membrane proteins, including G protein-coupled receptors (GPCRs), reveal the presence of ordered water molecules that may act like prosthetic groups in a manner quite unlike bulk water. Identification of 'ordered' waters within a crystalline protein structure requires sufficient occupancy of water to enable its detection in the protein's X-ray diffraction pattern, and thus, the observed waters likely represent a subset of tightly bound functional waters. In this review, we highlight recent studies that suggest the structures of ordered waters within GPCRs are as conserved (and thus as important) as conserved side chains. In addition, methods of radiolysis, coupled to structural mass spectrometry (protein footprinting), reveal dynamic changes in water structure that mediate transmembrane signaling. The idea of water as a prosthetic group mediating chemical reaction dynamics is not new in fields such as catalysis. However, the concept of water as a mediator of conformational dynamics in signaling is just emerging, because of advances in both crystallographic structure determination and new methods of protein footprinting. Although oil and water do not mix, understanding the roles of water is essential to understanding the function of membrane proteins.

59 BASIC BIOLOGICAL SCIENCES↗

Homogeneous limit of Cd{sub 1−x}Mn{sub x}GeAs{sub 2} alloy: Electrical and magnetic properties

We present the studies of structural, electrical, and magnetic properties of bulk Cd{sub 1−x}Mn{sub x}GeAs{sub 2} crystals with low Mn content, x, varying from 0 to 0.037. The studied samples have excellent crystallographic quality indicated by the presence of diffraction patterns never before observed experimentally for this compound. The electrical transport in our samples is dominated by thermal activation of conducting holes from the impurity states to the valence band with activation energy of about 200 meV. The defect states acting as ionic scattering centers with concentration in the range from 6 to 15 × 10{sup 17} cm{sup −3} are observed. The effective Mn content in our samples, x{sup ¯}{sub θ}, determined from fit of the susceptibility data to the Curie-Weiss law, is very close to the average chemical content, x. It indicates that the Mn ions are distributed randomly, substituting the Cd sites in the host CdGeAs{sub 2} lattice. We observe a negative Curie-Weiss temperature, |θ|≤3.1 K, increasing as a function of x. This indicates the significance of the short-range interactions between the Mn ions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of graphene oxide concentration on optical properties of ZnO/RGO nanocomposites and their application to photocurrent generation

The effects of different concentrations of graphene oxide (GO) on the structure and optical properties of ZnO nanoparticles (NPs) were investigated. The nanocomposites were synthesized via the sol-gel method in a gelatin medium. X-ray diffraction patterns (XRD) and Fourier transform infrared spectroscopy indicated that the GO sheets were reduced and changed to reduced GO (RGO) during the calcination of the nanocomposites at 400 °C. In addition, the XRD patterns of the NPs indicated a hexagonal (wurtzite) structure for all the products. Microscopic studies showed that the NPs were decorated and dispersed on the RGO sheets very well. However, these studies revealed that the RGO concentration had an effect on the crystal growth process for the ZnO NPs. Furthermore, these studies showed that the NPs could be grown with a single crystal quality in an optimum RGO concentration. According to the XRD results that were obtained from pure ZnO NPs, the calcinations temperature was decreased by the RGO. UV–vis and room temperature photoluminescence studies showed that the optical properties of the ZnO/RGO nanocomposite were affected by the RGO concentration. Finally, the obtained ZnO/RGO nanocomposite was used to generate a photocurrent. Observations showed that the photocurrent intensity of the nanocomposite was significantly increased by increasing the RGO, with an optimum RGO concentration.

36 MATERIALS SCIENCE↗

Equation of state of TiH[subscript 2] up to 90 GPa: A synchrotron x-ray diffraction study and ab initio calculations

We performed high-pressure studies and ab initio calculations of titanium hydride (TiH{sub 2}), an important compound in hydrogen storage research. In situ, synchrotron x-ray diffraction studies were carried out in two separate compression runs: the first up to 19 GPa in quasihydrostatic conditions and the second up to 90 GPa in nonhydrostatic conditions, and followed by the subsequent decompression to ambient conditions. The pressure evolution of the diffraction patterns revealed a cubic [face-centered-cubic (fcc), Fm-3m] to tetragonal (body-centered-tetragonal (bct), I4/mmm) phase transition in TiH{sub 2} occurring at or below 0.6 GPa. The high-pressure tetragonal phase persisted up to 90 GPa. Upon decompression to ambient conditions the observed phase transition appeared irreversible. A third order Birch-Murnaghan fit of the unit cell volume as a function of pressure for all experimental points, yielded a zero pressure bulk modulus K{sub 0} = 142(7) GPa, and its pressure derivative K{prime}{sub 0} = 3.3(0.2) for the high-pressure tetragonal phase of TiH{sub 2} and with K{prime}{sub 0} held at four, K{sub 0} = 130(5) GPa. The experimental value of bulk modulus confirmed our ab initio calculations where K{sub 0} = 139.9 GPa, and K{prime}{sub 0} = 3.7 for the high-pressure tetragonal phase of TiH{sub 2}.

08 HYDROGEN↗

Ab initio studies on phase transition, thermoelastic, superconducting and thermodynamic properties of the compressed cubic phase of AlH{sub 3}

The phase transition, thermoelastic, lattice dynamic, and thermodynamic properties of the cubic metallic phase AlH{sub 3} were obtained within the density-function perturbation theory. The calculated elastic modulus and phonon dispersion curves under various pressures at 0 K indicate the cubic phase is both mechanically and dynamically stable above 73 GPa. The superconducting transition temperature T{sub c} was calculated using the Allen-Dynes modification of the McMillan formula based on BCS theory. The calculations show that T{sub c} for the cubic phase AlH{sub 3} is 8.5 K (μ{sup *}=0.1) at the onset of this phase (73 GPa), while decreases to 5.7 K at 80 GPa and almost disappears at 110 GPa, consisting with experimental phenomenon that there was no superconducting transition observed down to 4 K over a wide pressure range 110–164 GPa. It is found that the soft phonon mode for branch 1, namely, the lowest acoustic mode, plays a crucial role in elevating the total EPC parameter λ of cubic AlH{sub 3}. And the evolution of T{sub c} with pressure follows the corresponding change of this soft mode, i.e. this mode is responsible for the disappearance of T{sub c} in experiments. Meanwhile, the softening of this lowest acoustic mode originates from the electronic momentum transfer from M to R point. This phenomenon provides an important insight into why drastic changes in the diffraction pattern were observed in the pressure range of 63–73 GPa in Goncharenko's experiments. Specifically, once finite electronic temperature effects are included, we find that dynamical instabilities can be removed in the phonon dispersion for P≥63 GPa, rendering the metastability of this phase in the range of 63–73 GPa, and T{sub c} (15.4 K) becomes remarkably high under the lowest possible pressure (63 GPa) compared with that of under 73 GPa (8.5 K). Our calculations open the possibility that finite temperature may allow cubic AlH{sub 3} to be dynamically stabilized even for pressures below 73 GPa. It is reasonable to deduced that if special techniques, such as rapid decompression, quenching, and annealing, are implemented in experiments, higher T{sub c} can be observed in hydrides or hydrogen-rich compounds under much lower pressure than ever before.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

X-ray diffraction and equation of state of the C–S–H room-temperature superconductor

X-ray diffraction indicates that the structure of the recently discovered carbonaceous sulfur hydride (C–S–H) room-temperature superconductor is derived from previously established van der Waals compounds found in the H 2 S–H 2 and CH 4 –H 2 systems. Crystals of the superconducting phase were produced by a photochemical synthesis technique, leading to the superconducting critical temperature T c of 288 K at 267 GPa. X-ray diffraction patterns measured from 124 to 178 GPa, within the pressure range of the superconducting phase, are consistent with an orthorhombic structure derived from the Al 2 Cu-type determined for (H 2 S) 2 H 2 and (CH 4 ) 2 H 2 that differs from those predicted and observed for the S–H system at these pressures. The formation and stability of the C–S–H compound can be understood in terms of the close similarity in effective volumes of the H 2 S and CH 4 components, and denser carbon-bearing S–H phases may form at higher pressures. Furthermore, the results are crucial for understanding the very high superconducting T c found in the C–S–H system at megabar pressures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of Ho-ion substitution on the magnetic properties of the Ca3Co2O6 frustrated spin-chain compound

Highlights: • A great sensitivity of the Ca{sub 3}Co{sub 2}O{sub 6} magnetic behavior to the presence of magnetic foreign cation are emphasized. • As the Ho content increases the ferrimagnetic configuration becomes less stable; and the antiferromagnetic (AFM) interaction enhances gradually. • Antiferromagnetic coupling interaction between Ho{sup 3+} ions are interpreted, The complex micro-mechanism are discussed in detail. - Abstract: Ho{sup 3+}-ion doped spin-chain compounds Ca{sub 3}Co{sub 2-x}Ho{sub x}O{sub 6} (x = 0, 0.05, 0.1, 0.15) were prepared by a conventional solid-state reaction method. Rietveld refinement of the X-ray diffraction patterns at room temperature confirmed the rhombohedral structure with the R 3-bar c space group. The results reveal that the solid solubility of the Ho element in Ca{sub 3}Co{sub 2}O{sub 6} is in the range of x = 0.1–0.15. Magnetic measurement suggests that with the increased Ho content: (1) the ferromagnetic transition temperature Tc and spin freezing temperature T{sub ƒ} decrease obviously; (2) the ferrimagnetic configuration becomes less stable; (3) the dynamic characteristics become slower; and (4) the antiferromagnetic (AFM) interaction enhances gradually. Based on these phenomena, the mechanism was discussed in detail. The magnetic correlation length is broken at a low Ho{sup 3+}-ion level, and the Ho{sup 3+}-ion pair formation along the chain with a high level of doping was interpreted.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Weak Ferroelectricity and Leakage Current Behavior of Multiferroic CoCr{sub 2}O{sub 4} Nanomaterials

Multiferroic CoCr{sub 2}O{sub 4} is synthesized by low-temperature sol-gel auto combustion technique. High energy synchrotron x-ray diffraction pattern confirms the single-phase cubic structure with space group Fd3m. Average crystallite size (17.91 nm) and negative micro-strain (9.86 × 10{sup −4}) are estimated by Williamson–Hall (W-H) plot. FTIR confirms the formation of spinel metal oxide-based cobalt chromites. The strong decrease in ε′ and tan δ at higher frequency can be interpreted by Maxwell-Wagner-type interfacial polarization. Weak ferroelectricity is mainly attributed to the partial reversal of polarization. J-E characteristic reveals the Ohmic (I–V) and Child’s square law (I–V{sup 2}) behavior observed in CoCr{sub 2}O{sub 4} nanomaterials with slope value ~ 1.04 and ~ 1.6, respectively. The conduction process for the leakage current density is interpreted using the space-charge limited current (SCLC) mechanism.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Investigations on the growth and characterization of vertically aligned zinc oxide nanowires by radio frequency magnetronsputtering

Undoped vertically aligned ZnO nanowires have been grown on silicon (111) substrates by the rf magnetron sputtering technique without metal catalyst. The diameter, length and density distributions of the nanowires have been analyzed with respect to the different growth durations. The tapering of the nanowires is observed for the growth duration of 120 min owing to the insufficient adatoms on the growth front. In the X-ray diffraction pattern, the dominant (002) peak with narrow full width at half maximum (FWHM) of ZnO nanowires indicates the c-axis orientation and high crystalline nature with hexagonal wurtzite crystal structure. The narrow FWHM of E{sub 2}{sup low} and E{sub 2}{sup high} phonon modes (1.4 and 9.1 cm{sup −1}) provide an additional evidence for the high crystalline and optical properties of the nanowires. The low temperature photoluminescence spectra are dominated by the green emission at∼2.28 eV induced by the electron transitions between shallow donor and acceptor energy levels. - Graphical abstract: Coalescence free vertically aligned ZnO nanowires have been grown on silicon (111) substrate by the radio frequency magnetron sputtering technique. Highlights: ► ZnO nanowires have been grown by rf magnetron sputtering. ► A morphologically superior and coalescence free ZnO nanowires have been realized. ► ZnO nanowires exhibit hexagonal wurtzite crystal structure. ► A dominant visible emission indicates the presence of point defects in nanowires.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Accelerated domain switching speed in single-crystal LiNbO{sub 3} thin films

By using ionic implantation and wafer bonding technologies, we peeled off a single-crystal LiNbO{sub 3} thin film in the atomic-layer smoothness from the surface of a bulk Z-cut LiNbO{sub 3} single crystal. X-ray diffraction patterns showed only (00l) orientation of the film. From positive-up-negative–down pulse characterization, we measured domain switching current transients under various short-pulse voltages, where we observed domain switching currents to occur separately at time after initial capacitor charging currents. This is similar to early observations in bulk ferroelectric single crystals, where apparent positive/negative coercive fields of domain switching determined from polarization-electric field hysteresis loops always equal maximum/minimum applied fields. However, after pulse stressing of the film for more than 1000 cycles, the domain switching speed is accelerated, where domain switching current overlaps with the initial capacitor charging current with a well-defined coercive field independent of the applied-field strength. Finally, we simulated the whole domain switching current transients with the assumption of the resistance degradation across interfacial passive layers between the film and electrodes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Near room temperature magnetodielectric consequence in (Li, Ti) doped NiO ceramic

In the quest for high-k dielectrics with decent magnetodielectric (MD) response, ball-milled processed (Li, Ti) doped NiO ceramics have been evaluated by various experimental techniques. Magnetic properties in these ceramics manifest with a pronounced anomaly appearing at ∼260 K, suggesting ferrimagnetic phase (related to cluster magnetism) and co-existence with a glassy-like antiferromagnetic phase at ∼7 K. Room temperature neutron diffraction pattern shows the existence of short-range magnetic correlations. In the magnetically ordered state below 250 K, the magnetic structure is found to be phase coexistence of G-type antiferromagnet and ferrimagnet. Impedance spectroscopy measurements over a wide temperature range can be perfectly described with appropriate microstructural model (internal barrier layer capacitor), based on domain and domain boundary relaxations, justifying the enhancement of the dielectric response. The low-temperature (T < 100 K) dielectric relaxation is polaronic in nature, associated with the charge ordering of a mixed valence states of Ti ions (co-existence of Ti{sup 3+} and Ti{sup 4+}). Finally, our investigations in external magnetic fields up to 15 T reveal the occurrence of negative MD effect near room temperature. This intriguing intrinsic feature has been understood by the mechanism of charge-hopping-mediated MD effects.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Study of structural, transport and magneto-crystalline anisotropy in La 1-x Sr x MnO 3 (0.30 ≤ x ≤ 0.40) perovskite manganites

In this paper we present structural, transport, magnetic and magneto-crystalline anisotropy of La 1–x Sr x MnO 3 (х = 0.30, 0.33, 0.36, and 0.40) synthesized using the solid-state reaction method. The X-ray diffraction pattern of the samples is well indexed to the rhombohedral structure with R 3 - c space group. Lattice parameters and unit cell volume are found to decrease monotonically upon increasing Sr 2+ concentration at La 3+ site. X-ray photoelectron spectroscopy confirms the presence of Mn 4+ and Mn 3+ , the ratio of which (Mn 4+ /Mn 3+ ) increases from 0.44 to 0.64 with increasing Sr 2+ concentration. From the ρ(T) and M(T) data analysis, we find that T MI and M S are larger for x = 0.33 composition, suggesting a weakening of the double-exchange interaction due to competing super-exchange interactions in x = 0.30, 0.36 and 0.40 samples. We calculated MCA constant (K 1 ) by fitting the saturation magnetisation data at a higher magnetic field using the law of approach model, M = M S [1-a/H-b/H 2 ]-χH with K 1 2 = (105/8)bMs 2 and is in the order of 10 5 erg/cm 3 .

36 MATERIALS SCIENCE↗

Microstructural, Magnetic, and Nanoindentation Studies of the Ball-Milled Ti80Ni20 Alloy

Nanostructured Ti{sub 80}Ni{sub 20} material was elaborated by mechanical alloying from pure Ti and Ni powders in a planetary ball-mill P7 under argon atmosphere at ambient temperature. Morphological, microstructural, magnetic, and nanoindentation properties were studied using scanning electron microscopy, X-ray diffraction, magnetic measurements, and nanoindentation test. The morphological observations show the predominance of the welding phenomenon during the milling process. The Rietveld refinement of the X-ray diffraction pattern reveals, after 4 h of milling, the formation of the disordered hcp-Ti (Ni) solid solution in addition to elemental hcp-Ti and fcc-Ni. On further milling (20 h), the interdiffusion between Ti and Ni atoms is evidenced by the formation of disordered hcp-Ti (Ni) and fcc-Ni (Ti) solid solutions. The saturation magnetization and coercivity values are about of 159.8 emu/g and 80.79 Oe, respectively, after 20 h of milling. M{sub r}/M{sub s} ratio indicates the existence of small magnetic particles which are typically single domains (M{sub r}/M{sub s} 0.1–0.5) and/or multidomain (M{sub r}/M{sub s} < 0.1). Nanohardness values of the sintered powders fluctuates between 1.53 and 5.98 GPa while those of the elastic modulus varies in the range 130.73 to 164.53 GPa.

77 NANOSCIENCE AND NANOTECHNOLOGY↗