Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dislocation structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

The Effect of the Method by Which a High-Resistivity GaN Buffer Layer Is Formed on Properties of InAlN/GaN and AlGaN/GaN Heterostructures with 2D Electron Gas

AlGaN/AlN/GaN and InAlN/AlN/GaN structures with 2D electron gas have been grown on sapphire substrates by metal-organic vapor-phase epitaxy. The suppression of the parasitic conductivity of buffer GaN layers was provided either by intentionally raising the density of edge dislocations or by doping with iron (GaN:Fe). It was shown that using GaN buffer layers with a better crystal perfection and more planar surface results in the electron mobility in the 2D channel for carriers becoming 1.2–1.5 times higher.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Collaborative Research: The Role of Grain Boundary Structure and Chemistry in Materials Failure

Throughout the one year duration of this award significant progress was made in understanding the effect of grain boundaries in polycrystalline materials. The starting point of this work is that each grain boundary can be characterized by an interface energy and respective interface parameter, which depend on the boundary chemical composition and structure. As this is a new point of view for treating grain boundaries, an interdisciplinary approach was followed to prove the existence of such interface terms. Throughout the project, hence, theory, experiments and simulations were used. Molecular dynamics and dislocation density-function dynamics were performed to understand dislocation-grain boundary interactions in pure Al crystalline materials, as potentials for Al are well established. The formation of dislocation pile-ups was observed and the strain profiles were in agreement with interfacial gradient plasticity, which is the theoretical framework that allows the introduction of mechanically induced interface energies. After verifying numerically the existence of mechanically induced interface energies, nanoindentation experiments were performed near grain boundaries of Fe-Si crystals that contained three grain boundaries. By indenting in close proximity to the boundary these experiments allowed for measuring the critical stress at which deformation was transmitted across the boundary to the adjacent grains, either through dislocation transmission or absorption and subsequent emission. This critical stress, also termed grain boundary yield stress, was in accordance with the value predicted by interfacial gradient plasticity, further verifying that mechanically induced interface energies can help define the material response. In the Fe-Si crystals the Si content was kept constant at 3wt%, but three specimen were considered each of which was characterized by a different misorientation at the grain boundary. By relating the experiments with the analytical gradient plasticity expressions it was possible to obtain first estimates for the interface parameter as ~200N/m. This value was not proportional to the misorientation angle, but depended also on the grain boundary plane. The continuation of this project is performing more detailed experiments on additional Fe-Si and Fe-C systems (both nanoindentation and in-situ transmission electron microscopy) to further understand the physical origin of such interface parameters. Furthermore, molecular dynamics nanoindentation simulations are also performed on similar systems to better understand the dislocation grain boundary interactions.

36 MATERIALS SCIENCE↗

Parameter development and characterization of laser powder directed energy deposition of Nb – Alloy C103 for thin wall geometries

This work focuses on the parameter development and microstructural characterization of Nb-based alloy C103 for thin wall structures produced via laser powder – directed energy deposition (LP – DED). Laser power and scanning speeds were varied as part of a design of experiments to identify adequate print parameters. Combinations were evaluated for relative density, porosity, and geometrical accuracy. A combination of a laser power of 1420 W and scanning speed of 14 mm/s resulted in a relative density >99%, exhibited a consistent weld bead profile and was used for further microstructural evaluation. A mix of optical and scanning electron microscopy (SEM) revealed small, slightly elongated grains along the edges and large epitaxial grains in the central region along the Build – Transverse view. Scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) analysis revealed Hf rich columnar cells in the center that transition into an evenly spaced cellular structure towards the edges of the built sample. Electron backscatter diffraction (EBSD) scans show a sharp [001] texture when looking at the cross section of the sample along the build direction. The Build – Scan view revealed a zig – zag pattern that follows the back – and – forth deposition strategy that was used. Finally, microhardness measurements were taken in the as – built (AB) and stress relieved (SR) conditions to baseline preliminary mechanical properties. The AB condition exhibited a large amount of scatter in the data and averages up to 11% larger than the SR condition. The reduction in scatter upon applying the SR cycle are indicative of a large concertation of dislocations present in the AB condition.

36 MATERIALS SCIENCE↗

The Impact of Rolling at Temperature on Conductivity and Texture in Nanolamellar Cu/Nb Bimetallic Composites

We report warm rolling is used to identify whether reductions in dislocation content would provide a significant impact on conductivity in accumulatively roll-bonded Cu-Nb nanolaminates. In addition, the impact of temperature on mechanical properties and interfacial texture is also quantified. Although temperature has a strong effect on dislocation content and mechanical properties, it is shown that length scale and volume fraction are most critical to defining the conductivity of the nanolaminate. Rolling at temperature reduced the flow stress of the material while maintaining the interfacial and layer structure, indicating that warm rolling can increase the ability to process the nanolaminates without reducing conductivity.

36 MATERIALS SCIENCE↗

Microstructure and nanohardness distribution in a polycrystalline Zn deformed by high strain rate impact

Polycrystalline Zn with an average grain size of about 300 {mu}m was deformed by direct impact Hopkinson pressure bar at a velocity of 29 m/s. An inhomogeneous grain structure was found consisting of a center region having large average grain size of 20 {mu}m surrounded by a fine-grained rim with an average grain size of 6 {mu}m. Transmission electron microscopy investigations showed a significant dislocation density in the large-grained area while in the fine-grained rim the dislocation density was negligible. Most probably, the higher strain yielded recrystallization in the outer ring while in the center only recovery occurred. The hardening effect of dislocations overwhelms the smaller grain size strengthening in the center part resulting in higher nanohardness in this region than in the outer ring. - Graphical Abstract: (a): EBSD micrograph showing the initial microstructure of polycrystalline Zn that was subsequently submitted to high strain rate impact. (b): an inhomogeneous grain size refinement was obtained which consists of a central coarse-grained area, surrounded by a fine-grained recrystallized rim. The black arrow points to the disc center. Research Highlights: {yields} A polycrystalline Zn specimen was submitted to high strain rate impact loading. {yields} Inhomogeneous grain refinement occurred due to strain gradient in impacted sample. {yields} A fine-grained recrystallized rim surrounded the coarse-grained center of specimen. {yields} The coarse-grained center exhibited higher hardness than the fine-grained rim. {yields} The higher hardness of the center was caused by the higher dislocation density.

36 MATERIALS SCIENCE↗

Denoising atomic resolution 4D scanning transmission electron microscopy data with tensor singular value decomposition

Tensor singular value decomposition (SVD) is a method to find a low-dimensional representation of data with meaningful structure in three or more dimensions. Here, tensor SVD has been applied to denoise atomic-resolution 4D scanning transmission electron microscopy (4D STEM) data. On data simulated from a SrTiO 3 [100] perfect crystal and a Si [110] edge dislocation, tensor SVD achieved an average peak signal-to-noise ratio (PSNR) of ~40 dB, which matches or exceeds the performance of other denoising methods, with processing times at least 100 times shorter. On experimental data from SrTiO 3 [100] and LiZnSb [11 2 ¯ 0]/GaSb [110] samples, tensor SVD denoises multiple GB 4D STEM data sets in ten minutes on a typical personal computer. Denoising with tensor SVD improves both convergent beam electron diffraction patterns and virtual-aperture annular dark field images.

36 MATERIALS SCIENCE↗

Room temperature creep in metals and alloys

Time dependent deformation in the form of creep and stress relaxation is not often considered a factor when designing structural alloy parts for use at room temperature. However, creep and stress relaxation do occur at room temperature (0.09-0.21 T m for alloys in this report) in structural alloys. This report will summarize the available literature on room temperature creep, present creep data collected on various structural alloys, and finally compare the acquired data to equations used in the literature to model creep behavior. Based on evidence from the literature and fitting of various equations, the mechanism which causes room temperature creep is found to include dislocation generation as well as exhaustion.

36 MATERIALS SCIENCE↗

Tensile Properties of Austenitic Stainless Steel Tubing with Internal Hydrogen/Tritium

Can microstructure explain the observed influence of hydrogen/tritium on tensile ductility? • Hydrogen is believed to interact with dislocations, grain boundaries, vacancies, and other microstructural features2 • How hydrogen and helium (He) interact with austenitic stainless steels remains a vigorous debate • We hypothesize that: • Hydrogen isotopes and decay helium act like solutes strengthening the steel and promoting planar deformation structures that reduce tensile ductility • These changes in mechanical behavior are not the same for differing microstructures

Wieber, Natalie↗

Towards a multiscale approach for understanding irradiation induced swelling and creep in 316 stainless steels - A coupled cluster dynamics and crystal plasticity approach

Structural materials undergo mechanical degradation, in part due to irradiation-induced swelling and creep, under nuclear reactor conditions. While swelling results from the migration and clustering of irradiation-induced atomic-scale mobile defects, the interaction of mesoscale dislocations with these defects causes creep deformation. A coupled crystal plasticity (CP) and mean-field cluster dynamics (CD) approach is presented to investigate the effect of irradiation on the long-term mechanical behavior of 316 stainless steel, which are under consideration for use in nuclear reactors. The temporal evolution of Frenkel pairs and extended defect population, under a chosen irradiation flux and temperature, is predicted using the CD model. The impact of the irradiation defects on the stress state, and the resulting dislocation-mediated inelastic deformation, is modeled concurrently with the CP model. The inelastic deformation is irradiation flux dependent, and early-stage defect evolution determines the later-stage mechanical behavior in 316 stainless steel.

36 - MATERIALS SCIENCE↗

Mitigation of tin whisker growth by inserting Ni nanocones

Highlights: • Tin whisker growth is mitigated effectively by inserting Ni nanocones. • Ni nanocones impede Sn dynamic recrystallization by blocking dislocation motions. • The inhibition method and mechanism are important to the study of tin whisker. - Abstract: An innovative controllable way has been proposed to mitigate tin whisker growth by inserting Ni nanocones prepared by electrodeposition. The results reveal that, after inserting Ni nanocones, tin whisker formation is mitigated effectively for 1.6 μm Sn coating but there is no inhibition effect for 4.5 μm Sn coating. The coatings are characterized by X-ray diffraction, scanning electron microscopy, energy dispersive spectrometer and electron backscatter diffraction (EBSD). The EBSD results show that Sn grain size without Ni nanocones increases significantly after indentation test compared with Sn grains with Ni nanocones. The inhibition effect of Ni nanocones on whisker growth can be ascribed to its specific structure which prevents dynamic recrystallization and produces horizontal grain boundaries of Sn grains. The structural inhibition method and mechanism proposed are of great importance to the research of tin whisker.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Growth, structure, defects and polarized absorption spectral properties of Er:Yb:YCa{sub 4}O(BO{sub 3}){sub 3} crystals

YCa{sub 4}O(BO{sub 3}){sub 3} (YCOB) crystals co-doped with 3 at% Er{sup 3+} and 20 at% Yb{sup 3+} were successfully grown by the Czochralski method. X-ray powder diffraction (XRPD) results show that the as-grown Er:Yb:YCOB crystal belongs to the monoclinic system with space group Cm. And the lattice parameters are a=8.076(8) Å, b=16.023(7) Å, c=3.528(4) Å and β=101.15(4)°. Crystal defects were revealed by chemical etching experiments. The density of etch pits, attributed to dislocations and observed on (010) planes, was found to be not uniform along the crystal diameter. The detailed polarized absorption spectra were measured. The polarized absorption cross sections at 977 nm are 1.01×10{sup −20}, 1.22×10{sup −20} and 1.05×10{sup −20} cm{sup 2} for E//X, E//Y and E//Z, respectively. And the polarized absorption cross sections at 1538 nm is about 1.86×10{sup −20} cm{sup 2} for both E//X and E//Z, but for E//Y the result is 1.03×10{sup −20} cm{sup 2}, which is much smaller. The relationship between the crystal structure and absorption spectra was discussed. - Graphical abstract: The as-grown bulk Er:Yb:YCOB crystal (the long axis is along the b-axis) and LeBail fit to the XRPD pattern of Er:Yb:YCOB (top) compared to the diffraction pattern of YCOB from the JCPDS data bank (bottom). Reflection markers indicate the calculated reflection positions. The middle trace gives the difference between observed and calculated intensity. Reflection indices corresponding to the strongest diffraction peaks are marked on the experimental pattern. - Highlights: • Er:Yb:YCOB crystal with a new composition was grown. • XRPD and FT-IR showed a certain degree of deformation in the crystal structure. • Detailed polarized absorption cross sections at 977 nm and 1538 nm were calculated. • Crystal defects were clearly revealed by chemical etching experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A non-singular theory of dislocations in anisotropic crystals

Here we develop a non-singular theory of three-dimensional dislocation loops in a particular version of Mindlin's anisotropic gradient elasticity with up to six length scale parameters. The theory is systematically developed as a generalization of the classical anisotropic theory in the framework of linearized incompatible elasticity. The non-singular version of all key equations of anisotropic dislocation theory are derived as line integrals, including the Burgers displacement equation with isolated solid angle, the Peach-Koehler stress equation, the Mura-Willis equation for the elastic distortion, and the Peach-Koehler force. The expression for the interaction energy between two dislocation loops as a double line integral is obtained directly, without the use of a stress function. It is shown that all the elastic fields are non-singular, and that they converge to their classical counterparts a few characteristic lengths away from the dislocation core. In practice, the non-singular fields can be obtained from the classical ones by replacing the classical (singular) anisotropic Green's tensor with the non-singular anisotropic Green's tensor derived by Lazar and Po (2015b). The elastic solution is valid for arbitrary anisotropic media. In addition to the classical anisotropic elastic constants, the non-singular Green's tensor depends on a second order symmetric tensor of length scale parameters modeling a weak non-locality, whose structure depends on the specific class of crystal symmetry. The anisotropic Helmholtz operator defined by such tensor admits a Green's function which is used as the spreading function for the Burgers vector density. As a consequence, the Burgers vector density spreads differently in different crystal structures. Two methods are proposed to determine the tensor of length scale parameters, based on independent atomistic calculations of classical and gradient elastic constants. The anisotropic non-singular theory is shown to be in good agreement with molecular statics without fitting parameters, and unlike its singular counterpart, the sign of stress components does not show reversal as the core is approached. Compared to the isotropic solution, the difference in the energy density per unit length between edge and screw dislocations is more pronounced.

42 ENGINEERING↗

Additively manufactured β-Ti5553 with laser powder bed fusion: Microstructures and mechanical properties of bulk and lattice parts

Ti5553 (Ti-5Al-5Mo-5V-3Cr wt%) is a titanium alloy widely used for its high strength-to-weight ratio and good formability at elevated temperatures. Unlike Ti-6Al-4V, Ti5553 does not undergo martensitic transformation, preventing cracking of brittle martensite upon rapid cooling. This makes it a strong candidate for additive manufacturing (AM), particularly laser powder bed fusion (L-PBF). L-PBF offers the unique opportunity to make fine lattice structures to reduce component weight. Despite the growing field of AM, there have been limited studies on L-PBF Ti5553 lattices and how their properties differ from the bulk. Here the present work addresses this knowledge gap by investigating microstructures and properties of L-PBF bulk and lattice parts and the effect of post L-PBF heat treatments. Electron microscopy and mechanical testing show that the high dislocation density formed during L-PBF increases bulk part’s yield strength by approximately 100 MPa compared to the conventional alloy. Digital image correlation during compression testing of octet truss lattices reveals a layer-by-layer failure mode. Compared to the bulk, the lattice contains copious ω nanoprecipitation, weaker <001> texture, smaller average grain sizes, and larger content of high-angle grain boundaries. These features elicit differences in Taylor factor distributions for the lattice depending on load direction, underlining challenges in predicting lattice mechanical response based on bulk properties. By examining the processing-structure-property relationships in the bulk and lattice, the present results delineate their microstructural and mechanical differences and establish a benchmark for the future design applications of L-PBF Ti5553.

36 MATERIALS SCIENCE↗

Multiscale investigations of nanoprecipitate nucleation, growth, and coarsening in annealed low-Cr oxide dispersion strengthened FeCrAl powder

A major challenge in the design of oxide dispersion strengthened (ODS) FeCrAl alloys is the optimization of the fine-scale particle size distribution that provides both beneficial mechanical properties and irradiation resistance. To address this obstacle, the nucleation, growth, and coarsening of the fine-scale (Y,Al,O) nanoprecipitates within an ODS FeCrAl powder was studied using atom probe tomography (APT) and small-angle neutron scattering (SANS). Mechanically alloyed Fe10Cr-6.1Al-0.3Zr + Y 2 O 3 wt.% (CrAZY) powders were heated in-situ from 20 to 1000 °C to capture the nucleation and growth of the nanoprecipitates using SANS. Furthermore, CrAZY powders were annealed at 1000 °C, 1050 °C, and 1100 °C for ageing times from 15 min to 500 h followed by either APT or magnetic SANS to study the structure, composition, and coarsening kinetics of the nanoprecipitates at high temperature. In-situ SANS results indicate nanoprecipitate nucleation and growth at low temperatures (200–600 °C). APT results revealed compositions corresponding to the cubic Y 3 Al 5 O 12 garnet (YAG) stoichiometry with a possible transition towards the perovskite YAlO3 (YAP) phase for larger precipitates after sufficient thermal ageing. However, magnetic SANS results suggest a defective structure for the nanoprecipitates indicated by deviations of the calculated A-ratio from stoichiometric (Y,Al,O) phases. Particle coarsening kinetics follow n = 6 power law kinetics with respect to particle size, but the mechanism cannot be explained through the dislocation pipe diffusion mechanism. In conclusion, the potential effect of precipitate coarsening during pre- and post-consolidation heat treatments on the irradiation resistance of ODS FeCrAl alloys is discussed with respect to sink strength maximization.

36 MATERIALS SCIENCE↗

A new self-adaptive reconstruction method to identify defects through Wigner–Seitz approach

A new self-adaptive reconstruction method based on local atomic structure at any given molecular dynamics (MD) step has been developed in this article. The method can be used in Wigner–Seitz defect analysis approach to correctly and efficiently explore the information of both point defects and complex defect clusters (e.g. dislocation loops and voids) formed after a displacement cascade where the cascade interacts with grain boundaries and/or dislocations. The algorithm and validation are provided in detail. Results for identification of radiation defects during and after cascades interacting with a dislocation network show that the new method can well recognize all simple and complex defects and defect clusters. Thus, this new method provides a totally new way to explore the density and size of radiation defects at atomic scale after complex MD evolution processes, providing correct information to understand and predict radiation damage in materials through atomic simulations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Evaluation of thickness and strain of thin planar layers of InAs on GaAs(001) using spectroscopic ellipsometry

We develop a technique for accurately measuring thickness of planar InAs films grown on (001) GaAs by spectroscopic ellipsometry, using bulk optical constants. We observe that the critical point structure for the E{sub 1} and E{sub 1} + Δ{sub 1} transitions extracted from the measured dielectric properties varies with strain in the layer. Transmission electron microscopy confirms the extracted thickness and measures the residual strain based on the dislocation spacing in the film. At small thickness, the E{sub 1} critical point is seen to markedly deviate from the dependence predicted by deformation potential theory and appears to be consistent with additional quantum confinement effects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Formation of tubular conduction channel in a SiGe(P)/Si core/shell nanowire heterostructure

Realizing a tubular conduction channel within a one-dimensional core–shell nanowire (NW) enables better understanding of quantum phenomena and exploration of electronic device applications. Herein, we report the growth of a SiGe(P)/Si core/shell NW heterostructure using a chemical vapor deposition coupled with vapor–liquid–solid growth mechanism. The entire NW heterostructure behaves as a p-type semiconductor, which demonstrates that the high-density carriers are confined within the 4 nm-thick Si shell and form a tubular conduction channel. These findings are confirmed by both calculations and the gate-dependent current–voltage ( I d – V g ) characteristics. Atomic resolution microscopic analyses suggest a coherent epitaxial core/shell interface where strain is released by forming dislocations along the axial direction of the NW heterostructure. Additional surface passivation achieved via growing a SiGe(P)/Si/SiGe core/multishell NW heterostructure suggests potential strategies to enhance the tubular carrier density, which could be further modified by improving multishell crystallinity and structural design.

36 MATERIALS SCIENCE↗