Search NASA⌕ Search

SEARCH · Search NASA

Results for “Distributed Estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Obliquity Driven Climate Change in Mars' Recent Past

We use the NASA/Ames grid Mars general circulation model with an updated radiation code and cloud nlicrophysics scheme. To speed up the simulations, we run the model at fairly coarse resolution (7.5" latitude x 22.5" longitude). Radiation Code Fluxes and heating rates are calculated from a radiation code based on the two-stream solution to radiative transfer that fully accounts for multiple scattering in the presence of gaseous absorp- tion. The model has 12 spectral intervals. Dust and water ice scattering properties are included. For dust, we use the Ockert-Bell [9] values in the visible, and Forget [IO] values in the infrared. For ice, we can either compute them online as the cloud evolves, or we can specify them. Gaseous opacities for water vapor and CO2 are calculated from correlated k-distributions taken from full line-by-line models. Cloud Microphysics Our cloud scheme is based on momentlorder scheme in which the mass mixing ratio and number density of the cloud ensemble are the advected species. From these we obtain a mean particle size and an estimate or the particle size distribution assuming a variance) which we then divide into 8 bins. Cloud microphysics is performed in each of these bins and includes nucleation, condensation, and gravitational settling. Dust is treated as a tracer and serves as condensation nuclei. The altered size distribution is then converted back into a mean size, a mixing ratio, and a particle number density.

Haberle, R. M.↗
DOE OSTI2019

Underestimating Internal Variability Leads to Narrow Estimates of Climate System Properties

Probabilistic estimates of climate system properties often rely on the comparison of model simulations to observed temperature records and an estimate of the internal climate variability. In this study, we investigate the sensitivity of probability distributions for climate system properties in the Massachusetts Institute of Technology Earth System Model to the internal variability estimate. In particular, we derive probability distributions using the internal variability extracted from 25 different Coupled Model Intercomparison Project Phase 5 models. We further test the sensitivity by pooling variability estimates from models with similar characteristics. We find the distributions to be highly sensitive when estimating the internal variability from a single model. When merging the variability estimates across multiple models, the distributions tend to converge to a wider distribution for all properties. This suggests that using a single model to approximate the internal climate variability produces distributions that are too narrow and do not fully represent the uncertainty in the climate system property estimates.

58 GEOSCIENCES↗
DOE OSTI2019

The impact of reliable range estimation on battery electric vehicle feasibility

Range limitation is a significant obstacle to market acceptance of battery electric vehicles (BEVs). Range anxiety is exacerbated when drivers could not reliably predict the remaining battery range or when their journeys were unexpectedly extended. This paper quantifies the impact of reliable range estimation on BEV feasibility using GPS-tracked travel survey data, collected over an 18-month period (from November 2004 to April 2006) in the Seattle metropolitan area. BEV feasibility is quantified as the number of days when travel adaption is needed if a driver replaces a conventional gasoline vehicle (CGV) with a BEV. The distribution of BEV range is estimated based on the real-world fuel efficiency data. A driver is assumed to choose between using a BEV or a substitute gasoline vehicle, based on the cumulative prospect theory (CPT). BEV is considered feasible for a particular driver if he/she needs to use a substitute vehicle on less than 0.5% of the travel days. By varying the values of some CPT parameter, the percentage of BEV feasible vehicles could change from less than 5% to 25%. Additionally, the numerical results show that with a 50% reduction in the standard deviation and 50% increase in the mean of the BEV range distribution BEV feasibility increases from less than 5% of the sampled drivers to 30%.

33 ADVANCED PROPULSION SYSTEMS↗
NASA NTRS1993

Effects of levitated dust on astronomical observations from the lunar surface

It is believed that a substantial population of levitated dust is present in the terminator region of the moon. Stray light scattered by this dust layer may contaminate astronomical observations made from the lunar surface using infrared, visible, and ultraviolet light. The evidence for dust levitation stems from: Surveyor vidicon images of horizon glow; anomalous brightness in photographs of the solar corona taken by Apollo astronauts while the spacecraft was just inside the moon's shadow; and observations by Apollo astronauts of streamers just prior to lunar orbital sunrise or just after lunar orbital sunset. It has been proposed that the differential charging of the lunar surface in the terminator region due to photoemission and the consequent strong local electric fields comprise the mechanism responsible for this levitation. Although quantitative data on the levitated lunar dust distribution are meager, it is possible to estimate column densities and sizes. In this paper we summarize the estimates of particulate sizes and number densities of previous authors, and construct a nominal terminator dust distribution, as a function of particulate radius and altitude above the lunar surface. Using the model we estimate the brightness of scattered sunshine for three wavelength bands. For the results in the visible wavelengths, we compare the estimated brightness with the known brightness of selected astronomical objects and discuss the implications for lunar-based astronomy.

Murphy, D. L.↗
NASA NTRS1985

The synthesis and analysis of color images

A method is described for performing the synthesis and analysis of digital color images. The method is based on two principles. First, image data are represented with respect to the separate physical factors, surface reflectance and the spectral power distribution of the ambient light, that give rise to the perceived color of an object. Second, the encoding is made efficient by using a basis expansion for the surface spectral reflectance and spectral power distribution of the ambient light that takes advantage of the high degree of correlation across the visible wavelengths normally found in such functions. Within this framework, the same basic methods can be used to synthesize image data for color display monitors and printed materials, and to analyze image data into estimates of the spectral power distribution and surface spectral reflectances. The method can be applied to a variety of tasks. Examples of applications include the color balancing of color images, and the identification of material surface spectral reflectance when the lighting cannot be completely controlled.

Wandell, B. A.↗
NASA NTRS1987

The synthesis and analysis of color images

A method is described for performing the synthesis and analysis of digital color images. The method is based on two principles. First, image data are represented with respect to the separate physical factors, surface reflectance and the spectral power distribution of the ambient light, that give rise to the perceived color of an object. Second, the encoding is made efficiently by using a basis expansion for the surface spectral reflectance and spectral power distribution of the ambient light that takes advantage of the high degree of correlation across the visible wavelengths normally found in such functions. Within this framework, the same basic methods can be used to synthesize image data for color display monitors and printed materials, and to analyze image data into estimates of the spectral power distribution and surface spectral reflectances. The method can be applied to a variety of tasks. Examples of applications include the color balancing of color images, and the identification of material surface spectral reflectance when the lighting cannot be completely controlled.

Wandell, Brian A.↗
DOE OSTI2025

LandScan mosaic enables high-resolution gridded population estimates with explicit uncertainty

Gridded population datasets represent high-resolution distributions of human occupancy, enabling informed decision-making across a broad range of fields. These data products are valuable for assessing environmental risk, urban development, disaster preparedness and resource allocation—areas where accurate population estimates directly enhance policy effectiveness and optimize resource distribution. Despite the importance of gridded population datasets, traditional population modeling approaches often overlook inherent uncertainties in the estimation process. This limitation can create a false sense of certainty in population estimates, potentially leading to flawed decisions by those who rely on the data. To address this methodological gap, we introduce a probabilistic machine learning modeling framework, LandScan Mosaic, that explicitly incorporates uncertainty into the population modeling process. Our approach systematically quantifies uncertainty in three key modeling parameters of the LandScan HD gridded population dataset: building use types, floor counts, and occupancy rates. By employing Monte Carlo simulations, we propagate these uncertainties through the modeling process, yielding probability distributions of population counts in place of deterministic point estimates. We demonstrate the practical application of this framework in Iloilo City, Philippines, using structured decision-making techniques and our probabilistic estimates to identify and prioritize areas most affected by projected flooding, supporting targeted interventions that address both economic and social risks. In doing so, we propose a population-specific approach for incorporating confidence into structured decision making processes. Through a comparative analysis with conventional deterministic approaches and point estimate approaches, including LandScan HD and WorldPop, we evaluate how the incorporation of machine learning and uncertainty influences decision rankings. This research advances population distribution modeling by offering a robust, quantitative approach that explicitly accounts for uncertainty in the underlying data, along with guidance for how users can apply uncertainty in their decision-making.

Environmental sciences↗
DOE OSTI2021

Composited structure of non-precipitating shallow cumulus clouds

The normalized distributions of thermodynamic and dynamical variables both within and outside shallow clouds are investigated through a composite algorithm using large-eddy simulations of oceanic and continental cases. The normalized magnitude is maximum near the cloud centre and decreases outwards. While relative humidity (RH) and cloud liquid water ( q l ) decrease smoothly to match the environment, the vertical velocity, virtual potential temperature (θ v ), and potential temperature (θ) perturbations have more complicated behaviour towards the cloud boundary. Below the inversion layer, θ' v becomes negative before the vertical velocity has turned from an updraft to a subsiding shell outside the cloud, indicating the presence of a transition zone where the updraft is negatively buoyant. Due to the downdraft outside the cloud and enhanced horizontal turbulent mixing across the edge, the normalized turbulent kinetic energy (TKE) and horizontal turbulent kinetic energy (HTKE) decrease more slowly from the cloud centre outwards than the thermodynamic variables. The distributions all present asymmetric structures in response to the vertical wind shear, with more negatively buoyant air, stronger downdrafts, and larger TKE on the downshear side. We discuss several implications of the distributions for theoretical models and parameterizations. Positive buoyancy near the cloud base is mostly due to the virtual effect of water vapour, emphasizing the role of moisture in triggering. The mean vertical velocity is found to be approximately half the maximum vertical velocity within each cloud, providing a constraint to achieve possible power-law distributions for some models. Finally, the normalized distributions for different variables are used to estimate the vertical heat and moisture fluxes within clouds. The results suggest that distributions near the cloud edge and variability of maximum perturbations need careful treatment. The fluxes are underestimated in the inversion layer because cloud-top downdrafts cannot be captured well.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Mycorrhizal Distributions Impact Global Patterns of Carbon and Nutrient Cycling

Most tree species predominantly associate with a single type of mycorrhizal fungi, which can differentially affect plant nutrient acquisition and biogeochemical cycling. Uncertainties in mycorrhizal distributions are non-trivial, and current estimates disagree in up to 50% over 40% of the land area, including tropical forests. Remote sensing capabilities for mycorrhizal detection show promise for refining these estimates further. Here, we address for the first time the impact of mycorrhizal distributions on global carbon and nutrient cycling. Using the state-of-the-art carbon-nitrogen economics within the Community Land Model version 5, we found Net Primary Productivity (NPP) increased throughout the 21st century by 20%; however, as soil nitrogen has progressively become limiting, the costs to NPP for nitrogen acquisition—that is, to mycorrhizae—have increased at a faster rate by 60%. This suggests that nutrient acquisition will increasingly demand a higher portion of assimilated carbon to support the same productivity.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2002

A Method to Retrieve Rainfall Rate over Land from TRMM Observations

Tropical Rainfall Measuring Mission (TRMM) Precipitation Radar (PR) observations over mesoscale convective systems (MCSs) reveal that there are localized maxima in the rain rate with a scale of about 10 to 20 km that represent thunderstorms (Cbs). Some of these Cbs are developing or intense, while others are decaying or weak. These Cbs constitute only about 20 % of the rain area of a given MCS. Outside of Cbs, the average rain rate is much weaker than that within Cbs. From an analysis of the PR data, we find that the spatial distribution of rain and its character, convective or stratiform, is highly inhomogeneous. This complex nature of rain exists on a scale comparable to that of a Cb. The 85 GHz brightness temperature, T85, observations of the TRMM Microwave Imager (TMI) radiometer taken over an MCS reflect closely the PR rain rate pattern over land. Local maxima in rain rate shown by PR are observed as local minima in T85. Where there are no minima in T85, PR observations indicate there is light rain. However, the TMI brightness temperature measurements (Tbs) have poor ability to discriminate convective rain from stratiform rain. For this reason, a TMI rain retrieval procedure that depends primarily on the magnitude of Tbs performs poorly. In order to retrieve rain rate from TMI data on land one has to include the spatial distribution information deduced from the T85 data in the retrieval method. Then, quantitative estimation of rain rate can be accomplished. A TMI rain retrieval method developed along these lines can yield estimates of rain rate and its frequency distribution which agree closely with that given by PR. We find the current TRMM project TMI (Version 5) rain retrieval algorithm on land could be improved with the retrieval scheme developed here. To support the conceptual frame work of the rain retrieval method developed here, a theoretical analysis of the TMI brightness temperatures in convective and stratiform regions is presented.

Prabhakara, C.↗
NASA NTRS1961

Ordinates and Theoretical Pressure-Distribution Data for NACA 6- and 6A-Series Airfoil Sections with Thicknesses from 2 to 21 and From 2 to 15 Percent Chord, Respectively

Information is presented with which ordinates can be easily obtained for any thickness from 2 to 21 percent chord for NACA 63-, 64-, and 65-series airfoil sections and from 2 to 15 percent chord for NACA 63A-, 64-A, series airfoil sections. In addition, data required for estimation of the theoretical pressure distributions of any of these airfoils are included.

Patterson, Elizabeth W.↗
DOE OSTI2018

A Nonparametric Bayesian Framework for Short-Term Wind Power Probabilistic Forecast

To improve the energy system resilience and economic efficiency, the wind power as a renewable energy starts to be deeply integrated into smart power grids. However, the wind power forecast uncertainty brings operational challenges. In order to provide a reliable guidance on operational decisions, in this paper, we propose a short-term wind power probabilistic forecast. Specifically, to model the rich dynamic behaviors of underlying physical wind power stochastic process occurring in various meteorological conditions, we first introduce an infinite Markov switching autoregressive model. This nonparametric time series model can capture the important properties in the real world data to improve the prediction accuracy. Then, given finite historical data, the posterior distribution of flexible forecast model can correctly quantify the model estimation uncertainty. Built on it, we develop the posterior predictive distribution to rigorously quantify the overall forecasting uncertainty accounting for both inherent stochastic uncertainty and model estimation error. Furthermore, the proposed approach can provide accurate and reliable short-term wind power probabilistic forecast, which can be used to support smart power grids real-time risk management.

17 WIND ENERGY↗
DOE OSTI2023

Effects of wind field characteristics on pitch bearing reliability: a case study of 5 MW reference wind turbine at onshore and offshore sites; Auswirkungen von Windfeldeigenschaften auf die Zuverlässigkeit von Rotorblattlagern: eine Fallstudie über eine 5-MW-Referenz-Windkraftanlage an Onshore- und Offshore-Standorten

This paper presents a study on pitch bearing basic rating life affected by wind field characteristics at both onshore and offshore wind sites. The National Renewable Energy Laboratory 5 MW reference wind turbine is selected for the study. Wind field characteristics including reference hub height mean wind speed, wind speed distribution, wind shear, and vertical inflow are studied. A decoupled approach is employed where global analysis is performed first. Second, the load effects from the global analysis are applied on a reference pitch bearing designed based on best industrial practices. For the case study onshore site, it is found that the Kernel density estimation best fits the wind distribution, while the International Electrotechnical Commission proposed distribution appears to be not suitable. Moreover, it is shown that the seed number has high effect on the bearing life in turbulence wind and the wind speeds around rated have the highest contribution in both bearing fatigue damage and extreme load failure. The results contribute to better understanding of the wind field characteristics on the pitch bearing life.

17 WIND ENERGY↗
NASA NTRS2004

GPS FOM Chimney Analysis using Generalized Extreme Value Distribution

Many a time an objective of a statistical analysis is to estimate a limit value like 3-sigma 95% confidence upper limit from a data sample. The generalized Extreme Value Distribution method can be profitably employed in many situations for such an estimate. . .. It is well known that according to the Central Limit theorem the mean value of a large data set is normally distributed irrespective of the distribution of the data from which the mean value is derived. In a somewhat similar fashion it is observed that many times the extreme value of a data set has a distribution that can be formulated with a Generalized Distribution. In space shuttle entry with 3-string GPS navigation the Figure Of Merit (FOM) value gives a measure of GPS navigated state accuracy. A GPS navigated state with FOM of 6 or higher is deemed unacceptable and is said to form a FOM 6 or higher chimney. A FOM chimney is a period of time during which the FOM value stays higher than 5. A longer period of FOM of value 6 or higher causes navigated state to accumulate more error for a lack of state update. For an acceptable landing it is imperative that the state error remains low and hence at low altitude during entry GPS data of FOM greater than 5 must not last more than 138 seconds. I To test the GPS performAnce many entry test cases were simulated at the Avionics Development Laboratory. Only high value FoM chimneys are consequential. The extreme value statistical technique is applied to analyze high value FOM chimneys. The Maximum likelihood method is used to determine parameters that characterize the GEV distribution, and then the limit value statistics are estimated.

Ott, Rick↗
NASA NTRS1989

Infrared emission from comets

IR observations of seven comets from 4 to 20 microns are discussed. It is found that the IR emission depends primarily on the comet's heliocentric distance. A model is applied to the observations based on grain populations composed of a mixture of silicate and amorphous carbon particles in the mass ratio of about 40 to 1, with a power-law size distribution similar to that inferred for Comet Halley. The results suggest that the 3.4-micron feature observed in Comet Halley is primarily due to thermal emission from the comet dust when the comet is close to the sun. It is found that the emission curve from about 4 to 8 microns provides the best spectral region for estimating the cometary grain temperature distribution.

Krishna Swamy, K. S.↗
NASA NTRS2011

The NASA Lightning Nitrogen Oxides Model (LNOM): Application to Air Quality Modeling

Recent improvements to the NASA Marshall Space Flight Center Lightning Nitrogen Oxides Model (LNOM) and its application to the Community Multiscale Air Quality (CMAQ) modeling system are discussed. The LNOM analyzes Lightning Mapping Array (LMA) and National Lightning Detection Network(TradeMark)(NLDN) data to estimate the raw (i.e., unmixed and otherwise environmentally unmodified) vertical profile of lightning NO(x) (= NO + NO2). The latest LNOM estimates of lightning channel length distributions, lightning 1-m segment altitude distributions, and the vertical profile of lightning NO(x) are presented. The primary improvement to the LNOM is the inclusion of non-return stroke lightning NOx production due to: (1) hot core stepped and dart leaders, (2) stepped leader corona sheath, K-changes, continuing currents, and M-components. The impact of including LNOM-estimates of lightning NO(x) for an August 2006 run of CMAQ is discussed.

Koshak, William↗
NASA NTRS1994

Is a data set distributed as a power law? A test, with application to gamma-ray burst brightnesses

We present a method to determine whether an observed sample of data is drawn from a parent distribution that is pure power law. The method starts from a class of statistics which have zero expectation value under the null hypothesis, H(sub 0), that the distribution is a pure power law: F(x) varies as x(exp -alpha). We study one simple member of the class, named the `bending statistic' B, in detail. It is most effective for detection a type of deviation from a power law where the power-law slope varies slowly and monotonically as a function of x. Our estimator of B has a distribution under H(sub 0) that depends only on the size of the sample, not on the parameters of the parent population, and is approximated well by a normal distribution even for modest sample sizes. The bending statistic can therefore be used to test a set of numbers is drawn from any power-law parent population. Since many measurable quantities in astrophysics have distriibutions that are approximately power laws, and since deviations from the ideal power law often provide interesting information about the object of study (e.g., a `bend' or `break' in a luminosity function, a line in an X- or gamma-ray spectrum), we believe that a test of this type will be useful in many different contexts. In the present paper, we apply our test to various subsamples of gamma-ray burst brightness from the first-year Burst and Transient Source Experiment (BATSE) catalog and show that we can only marginally detect the expected steepening of the log (N (greater than C(sub max))) - log (C(sub max)) distribution.

Wijers, Ralph A. M. J.↗
NASA NTRS2018

Influence of Precipitation Forcing Uncertainty on Hydrological Simulations with the NASA South Asia Land Data Assimilation System

Accurate meteorological estimates are critical for process-based hydrological simulationand prediction. This presents a significant challenge in mountainous Asia where in situmeteorological stations are limited and major river basins cross international borders. In thiscontext, remotely sensed and model-derived meteorological estimates are often necessary inputsfor distributed hydrological analysis. However, these datasets are difficult to evaluate on accountof limited access to ground data. In this case, the implications of uncertainty associated withprecipitation forcing for hydrological simulations is explored by driving the South Asia Land DataAssimilation System (South Asia LDAS) using a range of meteorological forcing products.MERRA2, GDAS, and CHIRPS produce a wide range of estimates for rainfall, which causes awidespread simulated streamflow and evapotranspiration. A combination of satellite-derived andlimited in situ data are applied to evaluate model simulations and, by extension, to constrain theestimates of precipitation. The results show that available gridded precipitation estimates based onin situ data may systematically underestimate precipitation in mountainous regions and thatperformance of gridded satellite-derived or modeled precipitation estimates varies systematicallyacross the region. Since no station-based data or product including station data is satisfactoryeverywhere, our results suggest that the evaluation of the hydrological simulation of streamflowand ET can be used as an indirect evaluation of precipitation forcing based on ground-basedproducts or in-situ data. South Asia LDAS produces reasonable evapotranspiration and streamflowwhen forced with appropriate meteorological forcing and the choice of meteorological forcingshould be made based on the geographical location as well as on the purpose of the simulations.

South Asia land data assimilation system (South As↗