Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dynamic parameter”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

New Insights for Improving the Designs of Flexible Duct Junction Boxes (Fact Sheet)

IBACOS explored the relationships between pressure and physical configurations of flexible duct junction boxes by using computational fluid dynamics (CFD) simulations to predict individual box parameters and total system pressure, thereby ensuring improved HVAC performance. Current Air Conditioning Contractors of America (ACCA) guidance (Group 11, Appendix 3, ACCA Manual D, Rutkowski 2009) allows for unconstrained variation in the number of takeoffs, box sizes, and takeoff locations. The only variables currently used in selecting an equivalent length (EL) are velocity of air in the duct and friction rate, given the first takeoff is located at least twice its diameter away from the inlet. This condition does not account for other factors impacting pressure loss across these types of fittings. For each simulation, the IBACOS team converted pressure loss within a box to an EL to compare variation in ACCA Manual D guidance to the simulated variation. IBACOS chose cases to represent flows reasonably correlating to flows typically encountered in the field and analyzed differences in total pressure due to increases in number and location of takeoffs, box dimensions, and velocity of air, and whether an entrance fitting is included. The team also calculated additional balancing losses for all cases due to discrepancies between intended outlet flows and natural flow splits created by the fitting. In certain asymmetrical cases, the balancing losses were significantly higher than symmetrical cases where the natural splits were close to the targets. Thus, IBACOS has shown additional design constraints that can ensure better system performance.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Computational Fluid Dynamics Analysis of Flexible Duct Junction Box Design

IBACOS explored the relationships between pressure and physical configurations of flexible duct junction boxes by using computational fluid dynamics (CFD) simulations to predict individual box parameters and total system pressure, thereby ensuring improved HVAC performance. Current Air Conditioning Contractors of America (ACCA) guidance (Group 11, Appendix 3, ACCA Manual D, Rutkowski 2009) allows for unconstrained variation in the number of takeoffs, box sizes, and takeoff locations. The only variables currently used in selecting an equivalent length (EL) are velocity of air in the duct and friction rate, given the first takeoff is located at least twice its diameter away from the inlet. This condition does not account for other factors impacting pressure loss across these types of fittings. For each simulation, the IBACOS team converted pressure loss within a box to an EL to compare variation in ACCA Manual D guidance to the simulated variation. IBACOS chose cases to represent flows reasonably correlating to flows typically encountered in the field and analyzed differences in total pressure due to increases in number and location of takeoffs, box dimensions, and velocity of air, and whether an entrance fitting is included. The team also calculated additional balancing losses for all cases due to discrepancies between intended outlet flows and natural flow splits created by the fitting. In certain asymmetrical cases, the balancing losses were significantly higher than symmetrical cases where the natural splits were close to the targets. Thus, IBACOS has shown additional design constraints that can ensure better system performance.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Computational Fluid Dynamics Analysis of Flexible Duct Junction Box Design

IBACOS explored the relationships between pressure and physical configurations of flexible duct junction boxes by using computational fluid dynamics (CFD) simulations to predict individual box parameters and total system pressure, thereby ensuring improved HVAC performance. Current Air Conditioning Contractors of America (ACCA) guidance (Group 11, Appendix 3, ACCA Manual D, Rutkowski 2009) allows for unconstrained variation in the number of takeoffs, box sizes, and takeoff locations. The only variables currently used in selecting an equivalent length (EL) are velocity of air in the duct and friction rate, given the first takeoff is located at least twice its diameter away from the inlet. This condition does not account for other factors impacting pressure loss across these types of fittings. For each simulation, the IBACOS team converted pressure loss within a box to an EL to compare variation in ACCA Manual D guidance to the simulated variation. IBACOS chose cases to represent flows reasonably correlating to flows typically encountered in the field and analyzed differences in total pressure due to increases in number and location of takeoffs, box dimensions, and velocity of air, and whether an entrance fitting is included. The team also calculated additional balancing losses for all cases due to discrepancies between intended outlet flows and natural flow splits created by the fitting. In certain asymmetrical cases, the balancing losses were significantly higher than symmetrical cases where the natural splits were close to the targets. Thus, IBACOS has shown additional design constraints that can ensure better system performance.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

A measurement of the distance to the Galactic centre using the kinematics of bar stars

The distance to the Galactic centre R 0 is a fundamental parameter for understanding the Milky Way, because all observations of our Galaxy are made from our heliocentric reference point. The uncertainty in R 0 limits our knowledge of many aspects of the Milky Way, including its total mass and the relative mass of its major components, and any orbital parameters of stars employed in chemo-dynamical analyses. While measurements of R 0 have been improving over a century, measurements in the past few years from a variety of methods still find a wide range of R 0 being somewhere within 8.0 to $8.5\, \mathrm{kpc}$. The most precise measurements to date have to assume that Sgr A* is at rest at the Galactic centre, which may not be the case. In this paper, we use maps of the kinematics of stars in the Galactic bar derived from APOGEE DR17 and Gaia EDR3 data augmented with spectrophotometric distances from the astroNN neural-network method. These maps clearly display the minimum in the rotational velocity v T and the quadrupolar signature in radial velocity v R expected for stars orbiting in a bar. From the minimum in v T , we measure $R_0 = 8.23\pm 0.12\, \mathrm{kpc}$. We validate our measurement using realistic N-body simulations of the Milky Way. We further measure the pattern speed of the bar to be $\Omega _\mathrm{bar} = 40.08\pm 1.78\, \mathrm{km\, s}^{-1}\,\mathrm{kpc}^{-1}$. Because the bar forms out of the disc, its centre is manifestly the barycentre of the bar+disc system and our measurement is therefore one of the most robust and accurate measurements of R 0 to date.

79 ASTRONOMY AND ASTROPHYSICS↗

Autoregressive distributed lag-based dynamic uniformity modeling and monitoring approaches for superconductor manufacturing

High-temperature superconductors (HTS), known for their high efficiency and low energy loss, have found profound applications across various fields, driving the demand for long, uniformly performing tapes. However, ensuring uniform performance over extended lengths of HTS tapes, often characterized by the consistency of critical current, remains challenging due to fluctuations in growth conditions during manufacturing. Here, to elucidate the mechanisms underlying variations in tape uniformity and enable real-time monitoring of associated parameters, we propose an Autoregressive Distributed Lag (ADL)-based Dynamic Uniformity Modeling and Monitoring (ADUM2) approach. This method integrates uniformity measurement, the identification of critical process parameters and real-time monitoring within the manufacturing process. The ADUM2 approach is applied to the advanced metal organic chemical vapor deposition (A-MOCVD) process, a pilot-scale method for superconductor manufacturing. Our model demonstrates superior performance compared to benchmark methods, accounting for over 80% of the total variance in the data and identifying 13 key process parameters influencing the uniformity of HTS tapes. This study offers significant insights into the high-temperature superconductor manufacturing process and holds the potential to facilitate the production of cost-effective, uniformly performing long superconducting tapes in the future.

autoregressive distributed lag analysis↗

Non-slow-roll dynamics in α-attractors

In this paper we consider the α−attractor model and study inflation under a non-slow-roll dynamics. More precisely, we follow the approach recently proposed by Gong and Sasaki [1] by means of assuming N=N(φ). Within this framework we obtain a family of functions describing the local shape of the potential during inflation. We study a specific model and find an inflationary scenario predicting an attractor at n{sub s}≈0.967 and r≈5.5×10{sup −4}. We further show that considering a non-slow-roll dynamics, the α−attractor model can be broaden to a wider class of models that remain compatible with value of r<0.1. We further explore the model parameter space with respect to large and small field inflation and conclude that the inflaton dynamics is connected to the α− parameter, which is also related to the Kähler manifold curvature in the supergravity (SUGRA) embedding of this model. We also comment on the stabilization of the inflaton's trajectory.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Sensitivity of Modal Parameters of an Offshore Wind Turbine to Operational and Environmental Factors: A Numerical Study: Preprint

The dynamics and performance of offshore wind turbines are sensitive to their structural properties, and in particular their modal parameters, i.e., natural frequencies, damping ratios and mode shapes. In this work, the sensitivity of the modal parameters of a 6 MW fixed-bottom offshore wind turbine to different operational and environmental conditions including wind speed and rotor speed is investigated. Effect of blade flexibility on the modal parameters of the system is also studied.

aerodynamic damping↗

Effect of attractive interactions on the water-like anomalies of a core-softened model potential

It is now well established that water-like anomalies can be reproduced by a spherically symmetric potential with two length scales, popularly known as core-softened potential. In the present study we aim to investigate the effect of attractive interactions among the particles in a model fluid interacting with core-softened potential on the existence and location of various water-like anomalies in the temperature-pressure plane. We employ extensive molecular dynamic simulations to study anomalous nature of various order parameters and properties under isothermal compression. Order map analyses have also been done for all the potentials. We observe that all the systems with varying depth of attractive wells show structural, dynamic, and thermodynamic anomalies. As many of the previous studies involving model water and a class of core softened potentials have concluded that the structural anomaly region encloses the diffusion anomaly region, which in turn, encloses the density anomaly region, the same pattern has also been observed in the present study for the systems with less depth of attractive well. For the systems with deeper attractive well, we observe that the diffusion anomaly region shifts toward higher densities and is not always enclosed by the structural anomaly region. Also, density anomaly region is not completely enclosed by diffusion anomaly region in this case.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

MITgcm-AD v2: Open source tangent linear and adjoint modeling framework for the oceans and atmosphere enabled by the Automatic Differentiation tool Tapenade

The Massachusetts Institute of Technology General Circulation Model (MITgcm) is widely used by the climate science community to simulate planetary atmosphere and ocean circulations. A defining feature of the MITgcm is that it has been developed to be compatible with an algorithmic differentiation (AD) tool, TAF, enabling the generation of tangent-linear and adjoint models. These provide gradient information which enables dynamics-based sensitivity and attribution studies, state and parameter estimation, and rigorous uncertainty quantification. Importantly, gradient information is essential for computing comprehensive sensitivities and performing efficient large-scale data assimilation, ensuring that observations collected from satellites and in-situ measuring instruments can be effectively used to optimize a large uncertain control space. As a result, the MITgcm forms the dynamical core of a key data assimilation product employed by the physical oceanography research community: Estimating the Circulation and Climate of the Ocean (ECCO) state estimate. Although MITgcm and ECCO are used extensively within the research community, the AD tool TAF is proprietary and hence inaccessible to a large proportion of these users. The new version 2 (MITgcm-AD v2) framework introduced here is based on the source-to-source AD tool Tapenade, which has recently been open-sourced. Another feature of Tapenade is that it stores required variables by default (instead of recomputing them) which simplifies the implementation of efficient, AD-compatible code. The framework has been integrated with the MITgcm model’s main branch and is now freely available.

Adjoints↗

Assessing the Influence of Microphysical and Environmental Parameter Perturbations on Orographic Precipitation

Microphysical (MP) schemes contain parameters whose values can impact the amount and location of forecasted precipitation, and sensitivity is typically explored by perturbing one parameter at a time while holding the rest constant. Although much can be learned from these “one-at-a-time” studies, the results are limited as these methods do not allow for nonlinear interactions of multiple perturbed parameters. This study applies the Morris one-at-a-time (MOAT) method, a robust statistical tool allowing for simultaneous perturbation of numerous parameters, to explore orographic precipitation sensitivity to changes in microphysical and environmental parameters within an environment characteristic of an atmospheric river. Results show parameters associated with snow fall speed coefficient A s and density ρ s , ice-cloud water collection efficiency (ECI), rain accretion (WRA), relative humidity, zonal wind speed, and surface potential temperature cause the largest influence on simulated precipitation. MP and environmental parameter perturbations can cause precipitation changes of similar magnitude, but results vary by location on the mountain. Different environments are also tested, with A s being the most influential MP parameter regardless of environment. Fewer MP parameters influence precipitation in a faster-wind-speed environment, possibly due to the stronger dynamical forcing upwind and different wave dynamics downwind, compared to a slower-wind-speed environment. Finally, perturbing MP parameters within a single scheme can result in precipitation variations of similar magnitude compared to using entirely different microphysics schemes. MOAT results presented in this study have implications for Bayesian parameter estimation methods and stochastic parameterization within ensemble forecasting.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamic Analysis of the Next Generation Molten-Salt Breeder Reactor System

The conceptual design of a 1000 MWe two-fluid molten-salt breeder reactor (MSBR) station was performed during 1966-1970 at Oak Ridge National Laboratory (ORNL) with the goal of using the U-233 fuel cycle. This modular design with four reactor modules has an electrical output of 250 MW/module. The abundance of Th-232 was attractive in converting it to U-233 in a thermal breeder reactor. The two-fluid reactor is graphite-moderated 'with a {sup 7}LiF-BeF{sub 2}-UF{sub 4} fuel salt circulated through the core and a {sup 7}LiF-ThF{sub 4}-BeF{sub 2} blanket salt circulated through separate flow channels distributed throughout the core, as well as in a surrounding under-moderated region'. This reactor design has the advantages of not producing Pu isotopes and easy chemical separation of U-233 in the blanket material. The low fuel cost and the graphite replacement cost are attractive for such a design, with an estimated cost of $141/kW at 1968-dollar value. Potential non-proliferation features of MSBR, the low costs of raw materials, and established chemical separation of fission products are important factors in further development of MSBRs as an alternative to current light water reactors. These reactors are often referred to as liquid fluoride thorium reactor (LFTR). The current research on the modeling of the MSBR is based on an earlier work on the preliminary dynamic model of the MSBR concept. Revisions are made to the original model. The physics parameters have been modified for the current modeling effort based on additional information including more recent values of model parameters from and several typographical misprints in equations and values. Details of this effort will be presented in a full follow-up paper. This work presents the detailed nodal models of reactor fluid core, blanket fluid loop, graphite moderator, fuel fluid heat exchanger, and the blanket fluid heat exchanger. A set of simulations has been performed to validate the model using the commercial software MATLAB{sup TM}-Simulink. Simulations were performed for the cases of source perturbation and reactivity perturbation. The model is inherently nonlinear. A description of the MSBR conceptual design, along with a tabulation of relevant system parameters, is presented. The results of simulation demonstrate stable behavior of the MSBR dynamics, temperature feedback effects, and load-following capability of the MSBR system.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A new estimator of the deceleration parameter from galaxy rotation curves

The nature of dark energy can be probed by the derivative Q=dq(z)/dz|{sub 0} at redshift z = 0 of the deceleration parameter q(z). It is probably static if Q<1 or dynamic if Q>2.5, supporting ΛCDM or Λ=(1−q)H{sup 2}, respectively, where H denotes the Hubble parameter. We derive q=1−(4πa{sub 0}/cH){sup 2}, enabling a determination of q(z) by measuring Milgrom’s parameter, a{sub 0}(z), in galaxy rotation curves, equivalent to the coefficient A in the Tully–Fisher relation V{sub c}{sup 4}=AM{sub b} between a rotation velocity V {sub c} and a baryonic mass M {sub b}. We infer that dark matter should be extremely light, with clustering limited to the size of galaxy clusters. The associated transition radius to non-Newtonian gravity can conceivably be probed in a freefall Cavendish-type experiment in space.

79 ASTRONOMY AND ASTROPHYSICS↗

Robustness of Dynamical Cluster Analysis in a Glass-Forming Metallic Liquid using an Unsupervised Machine Learning Algorithm

We performed dynamical cluster analysis in a Cu-Zr-Al based glass-forming metallic liquid using an unsupervised machine learning algorithm. The size of the dynamical clusters is used to quantify the onset of cooperative dynamics as the underlying mechanism leading to the Arrhenius dynamic crossover in transport coefficients of the metallic liquid. This technique is useful to directly visualize dynamical clusters and quantify their sizes upon cooling. Here, we demonstrate the robustness of this algorithm by performing sensitivity analysis against two key parameters: number of mobility groups and inconsistency coefficient of the hierarchical cluster tree. The results elucidate the optimized range of values for both of these parameters that capture the underlying physical picture of increasing cooperative dynamics appropriately.

36 MATERIALS SCIENCE↗

A Graph Dynamical neural network approach for decoding dynamical states in ferroelectrics.

Ferroelectric materials such as BaTiO 3 show tremendous potential for emerging advances in memory devices, particular neuromorphic type devices. High density of memory can be obtained by stabilising polar domain walls at the nanoscale, regions of discontinuity between the well-defined polarization order parameter, but little is known about what controls their structure and dynamics in real nanoscale materials. Indeed, chiral polar domain walls have been observed in heterogeneous ferroelectrics, such as oxygen-deficient BaTiO 3 , but very little is known about how such polar-domains walls interact with defects. Indeed, a critical understanding of how dynamics of domain-walls depend on point-defects is crucial to create engineered ferroelectric memory devices. For this work, we perform large-scale simulations of nansocale domain-wall dynamics in pristine and defective BaTiO 3 using reactive force-field developed by us earlier (Phys. Chem. Chem. Phys., 2019, 21, 18240–18249), and capture their dynamical dependence on point defects using a graph dynamical neural-network approach, which we adapted to interrogate solids with well-defined order-parameters, and implemented using Pytorch based libraries. Our machine learning (ML) approach goes beyond the traditional post-processing methods to capture both spatial and temporal heterogeneities of large-scale molecular dynamics simulations of complex defective ferroelectric oxide materials. We crucially find that isolated oxygen vacancies introduce very localized spatial regions (~1–2 unit-cell in length) that show slow dipole relaxation due to formation of defect-dipoles, and that these defect-dipoles in turn slow the intrinsic dynamics of domain walls. Further, the roughness of domain walls, also influenced by vacancies, introduce dynamic heterogeneity along the domain-wall. As such we find a novel mechanism by which quenched disorder due to defects introduce dynamic heterogeneity thereby influencing response to external fields (particularly time varying fields) in a ferroelectric. Our study also emphasizes the need for creating digital twins of dynamical quantities to achieve autonomous in operando control of nanoscale switching.

42 ENGINEERING↗

Redshift evolution of the dynamical properties of massive galaxies from SDSS-III/BOSS

We study the redshift evolution of the dynamical properties of ∼180, 000 massive galaxies from SDSS-III/BOSS combined with a local early-type galaxy sample from SDSS-II in the redshift range 0.1 ≤ z ≤ 0.6. The typical stellar mass of this sample is M{sub *} ∼2 × 10{sup 11} M{sub ☉}. We analyze the evolution of the galaxy parameters effective radius, stellar velocity dispersion, and the dynamical to stellar mass ratio with redshift. As the effective radii of BOSS galaxies at these redshifts are not well resolved in the Sloan Digital Sky Survey (SDSS) imaging we calibrate the SDSS size measurements with Hubble Space Telescope/COSMOS photometry for a sub-sample of galaxies. We further apply a correction for progenitor bias to build a sample which consists of a coeval, passively evolving population. Systematic errors due to size correction and the calculation of dynamical mass are assessed through Monte Carlo simulations. At fixed stellar or dynamical mass, we find moderate evolution in galaxy size and stellar velocity dispersion, in agreement with previous studies. We show that this results in a decrease of the dynamical to stellar mass ratio with redshift at >2σ significance. By combining our sample with high-redshift literature data, we find that this evolution of the dynamical to stellar mass ratio continues beyond z ∼ 0.7 up to z > 2 as M{sub dyn}/M{sub *} ∼(1 + z){sup –0.30±0.12}, further strengthening the evidence for an increase of M{sub dyn}/M{sub *} with cosmic time. This result is in line with recent predictions from galaxy formation simulations based on minor merger driven mass growth, in which the dark matter fraction within the half-light radius increases with cosmic time.

79 ASTRONOMY AND ASTROPHYSICS↗

NMR spin relaxation in proteins: The patterns of motion that dissipate power to the bath

We developed in recent years the two-body coupled-rotator slowly relaxing local structure (SRLS) approach for the analysis of NMR relaxation in proteins. The two bodies/rotators are the protein (diffusion tensor D{sub 1}) and the spin-bearing probe, e.g., the {sup 15}N−{sup 1}H bond (diffusion tensor, D{sub 2}), coupled by a local potential (u). A Smoluchowski equation is solved to yield the generic time correlation functions (TCFs), which are sums of weighted exponentials (eigenmodes). By Fourier transformation one obtains the generic spectral density functions (SDFs) which underlie the experimental relaxation parameters. The typical paradigm is to characterize structural dynamics in terms of the best-fit values of D{sub 1}, D{sub 2}, and u. Additional approaches we pursued employ the SRLS TCFs, SDFs, or eigenmodes as descriptors. In this study we develop yet another perspective. We consider the SDF as function of the angular velocity associated with the fluctuating fields underlying NMR relaxation. A parameter called j-fraction, which represents the relative contribution of eigenmode, i, to a given value of the SDF function at a specific frequency, ω, is defined. j-fraction profiles of the dominant eigenmodes are derived for 0 ≤ ω ≤ 10{sup 12} rad/s. They reveal which patterns of motion actuate power dissipation at given ω-values, what are their rates, and what is their relative contribution. Simulations are carried out to determine the effect of timescale separation, D{sub 1}/D{sub 2}, axial potential strength, and local diffusion axiality. For D{sub 1}/D{sub 2} ≤ 0.01 and strong local potential of 15 k{sub B}T, power is dissipated by global diffusion, renormalized (by the strong potential) local diffusion, and probe diffusion on the surface of a cone (to be called cone diffusion). For D{sub 1}/D{sub 2} = 0.1, power is dissipated by mixed eigenmodes largely of a global-diffusion-type or cone-diffusion-type, and a nearly bare renormalized-local-diffusion eigenmode. For D{sub 1}/D{sub 2} > 0.1, most eigenmodes are of a mixed type. The analysis is affected substantially by reducing the potential strength from 15 to 5 k{sub B}T, and/or allowing for axial D{sub 2} with D{sub 2,∥}/D{sub 2,⊥} = 10. The scheme developed is applied to {sup 15}N−{sup 1}H relaxation from the β-sheet residue K19 and the α-helix residue A34 of the third immunoglobulin-binding domain of streptococcal protein G. Previous studies revealed rhombic local potentials with different rhombicity around C{sub i−1}{sup α}−C{sub i}{sup α}, and different timescale separation (0.047 for K19 and 0.102 for A34). Here, we find that K19 and A34 dissipate power to the bath through global diffusion, mixed cone-diffusion-related and mixed renormalized-local-diffusion-related motions. At small ω-values, A34 is more effective than K19 in dissipating power. In general, it executes faster cone-diffusion-type, and slower renormalized-local-diffusion-type and local-probe-fluctuation-type motions. K19 experiences faster N−H fluctuations than A34. Eigenmode clustering, experienced by K19 to a larger extent, is observed in the fast-probe-fluctuation regime. New information on the effect of the structural context on N−H bond dynamics has been obtained. The patterns of motion that dissipate NMR-relaxation-related power illuminate protein dynamics from a new perspective. They constitute yet another qualifier of N−H bond dynamics. This study sets the stage for developing ways for enhancing the contribution of desired pathways for power dissipation at selected angular velocities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tree level hydrodynamic approach for resolving aboveground water storage and stomatal conductance and modeling the effects of tree hydraulic strategy

The finite difference ecosystem-scale tree crown hydrodynamics model version 2 (FETCH2) is a tree-scale hydrodynamic model of transpiration. The FETCH2 model employs a finite difference numerical methodology and a simplified single-beam conduit system to explicitly resolve xylem water potentials throughout the vertical extent of a tree. Empirical equations relate water potential within the stem to stomatal conductance of the leaves at each height throughout the crown. While highly simplified, this approach brings additional realism to the simulation of transpiration by linking stomatal responses to stem water potential rather than directly to soil moisture, as is currently the case in the majority of land surface models. FETCH2 accounts for plant hydraulic traits, such as the degree of anisohydric/isohydric response of stomata, maximal xylem conductivity, vertical distribution of leaf area, and maximal and minimal xylem water content. We used FETCH2 along with sap flow and eddy covariance data sets collected from a mixed plot of two genera (oak/pine) in Silas Little Experimental Forest, NJ, USA, to conduct an analysis of the intergeneric variation of hydraulic strategies and their effects on diurnal and seasonal transpiration dynamics. We define these strategies through the parameters that describe the genus level transpiration and xylem conductivity responses to changes in stem water potential. Here, our evaluation revealed that FETCH2 considerably improved the simulation of ecosystem transpiration and latent heat flux in comparison to more conventional models. In conclusion, a virtual experiment showed that the model was able to capture the effect of hydraulic strategies such as isohydric/anisohydric behavior on stomatal conductance under different soil-water availability conditions.

59 BASIC BIOLOGICAL SCIENCES↗

Factoring the strong CP problem

We present a new mechanism to solve the strong CP problem using $N\geq2$ axions, each dynamically relaxing part of the $\bar\theta$ parameter. At high energies $M\gg\Lambda_{QCD}$ the $SU(3)_{c}$ group becomes the diagonal subgroup of an $SU(3)^{N}$ gauge group, and the non-perturbative effects in each individual $SU(3)$ factor generate a potential for the corresponding axion. The vacuum is naturally aligned to ensure $\bar\theta=0$ at low energies, and the masses of these axions can be much larger than for the standard QCD axion. This mechanism avoids the introduction of a discrete $Z_2$ symmetry and associated 'mirror' copies of the SM fermions, and also avoids the introduction and stabilization of new light colored states to modify the running of the QCD gauge coupling found in other heavy axion models. This strengthens the motivation for axion-like particles solving the strong CP problem at points beyond the standard QCD axion curve in the $(m_a, f_a)$ plane.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗