Search NASA⌕ Search

SEARCH · Search NASA

Results for “Earth System Model Development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Satellite Power Systems (SPS) concept definition study. Volume 5: Special emphasis studies

Satellite configurations based on the Satellite Power System baseline requirements were analyzed and a preferred concept selected. A satellite construction base was defined, precursor operations incident to establishment of orbital support facilities identified, and the satellite construction sequence and procedures developed. Rectenna construction requirement were also addressed. Mass flow to orbit requirements were revised and traffic models established based on construction of 60 instead of 120 satellites. Analyses were conducted to determine satellite control, resources, manufacturing, and propellant requirements. The impact of the laser beam used for space-to-Earth power transmission upon the intervening atmosphere was examined as well as the inverse effect. The significant space environments and their effects on spacecraft components were investigated to define the design and operational limits imposed by the environments on an orbit transfer vehicle. The results show that LEO altitude 300 nmi and transfer orbit duration 6 months are preferrable.

Hanley, G. M.↗

High temperature electrolyzer/fuel cell power cycle: Preliminary design considerations

A model of a high temperature electrolyzer/fuel cell, hydrogen/oxygen, thermally regenerative power cycle is developed and used to simulate system performance for varying system parameters. Initial estimates of system efficiency, weight, and volume are provided for a one KWe module assuming specific electrolyzer and fuel cell characteristics, both current and future. Specific interest is placed on examining the system responses to changes in device voltage versus current density operating curves, and the associated optimum operating ranges. The performance of a solar-powered, space based system in low earth orbit is examined in terms of the light-dark periods requiring storage. The storage design tradeoffs between thermal energy, electrical energy, and hydrogen/oxygen mass storage are examined. The current technology module is based on the 1000 C solid oxide electrolyzer cell and the alkaline fuel cell. The Future Technology system examines benefits involved with developing a 1800K electrolyzer operating with an advanced fuel cell.

Morehouse, Jeffrey H.↗

Distributed earth model/orbiter simulation

Distributed Earth Model/Orbiter Simulation (DEMOS) is a network based application developed for the UNIX environment that visually monitors or simulates the Earth and any number of orbiting vehicles. Its purpose is to provide Mission Control Center (MCC) flight controllers with a visually accurate three dimensional (3D) model of the Earth, Sun, Moon and orbiters, driven by real time or simulated data. The project incorporates a graphical user interface, 3D modelling employing state-of-the art hardware, and simulation of orbital mechanics in a networked/distributed environment. The user interface is based on the X Window System and the X Ray toolbox. The 3D modelling utilizes the Programmer's Hierarchical Interactive Graphics System (PHIGS) standard and Raster Technologies hardware for rendering/display performance. The simulation of orbiting vehicles uses two methods of vector propagation implemented with standard UNIX/C for portability. Each part is a distinct process that can run on separate nodes of a network, exploiting each node's unique hardware capabilities. The client/server communication architecture of the application can be reused for a variety of distributed applications.

Geisler, Erik↗

CRI planning and scheduling for space

Computer Resources International (CRI) has many years of experience in developing space planning and scheduling systems for the European Space Agency. Activities range from AIT/AIV planning over mission planning to research in on-board autonomy using advanced planning and scheduling technologies in conjunction with model based diagnostics. This article presents four projects carried out for ESA by CRI with various subcontractors: (1) DI, Distributed Intelligence for Ground/Space Systems is an on-going research project; (2) GMPT, Generic Mission Planning Toolset, a feasibility study concluded in 1993; (3) OPTIMUM-AIV, Open Planning Tool for AIV, development of a knowledge based AIV planning and scheduling tool ended in 1992; and (4) PlanERS-1, development of an AI and knowledge-based mission planning prototype for the ERS-1 earth observation spacecraft ended in 1991.

Aarup, Mads↗

A Scalability Model for ECS's Data Server

This report presents in four chapters a model for the scalability analysis of the Data Server subsystem of the Earth Observing System Data and Information System (EOSDIS) Core System (ECS). The model analyzes if the planned architecture of the Data Server will support an increase in the workload with the possible upgrade and/or addition of processors, storage subsystems, and networks. The approaches in the report include a summary of the architecture of ECS's Data server as well as a high level description of the Ingest and Retrieval operations as they relate to ECS's Data Server. This description forms the basis for the development of the scalability model of the data server and the methodology used to solve it.

Menasce, Daniel A.↗

Alternative Representations of Convective Processes in the NASA GEOS-5 AGCM

The gap in explicit resolution of phenomena between global climate models and cloud resolving models is shrinking at a steady pace with global integrations of several km in resolution now practical for at least some time scales. In moving toward finer resolution the long standing problem of convective parameterization is being examined along with the assumption of convective quasi-equilibrium and how this can be reconciled with the stochastic and intermittent nature of convection. In this context we examine the nature of parameterized convection in the NASA Goddard Earth Observing System (GEOS-5) Atmospheric General Circulation Model. Our analysis uses both coarse (2.5 degree) and fine scale 0.25 degree spatial resolution integrations. Two basic formulations are compared: the default option is the Relaxed Arakawa-Schubert (RAS) scheme which invokes a sequence of linearly entraining plumes and quasi-equilibrium closure. An optional modification of this method (the "Stochastic Tokioka" constraint) places a random lower limit on plume entrainment. An alternative representation is the Kain-Fritsch parameterization which was originally developed for mesoscale numerical modeling strategies. Here entrainment is determined by a crude buoyancy sorting approach that allows the plume spectrum to be more responsive to ambient vertical stratification of moisture. Diagnostics of the model behavior are referenced to recent observational evidence of continuous phase transition behavior. In particular we examine the relationship between column water vapor and probablility of convective presence and intensity. Sensitivity of the statistics of convective behavior to parcel mixing/entrainment formulations and parcel initial thermodynamics are considered. Observational statistics from A-Train and TRMM sensors provide validation of the model integrations.

Robertson, Franklin↗

Accurate Radiometry from Space: An Essential Tool for Climate Studies

The Earth s climate is undoubtedly changing; however, the time scale, consequences and causal attribution remain the subject of significant debate and uncertainty. Detection of subtle indicators from a background of natural variability requires measurements over a time base of decades. This places severe demands on the instrumentation used, requiring measurements of sufficient accuracy and sensitivity that can allow reliable judgements to be made decades apart. The International System of Units (SI) and the network of National Metrology Institutes were developed to address such requirements. However, ensuring and maintaining SI traceability of sufficient accuracy in instruments orbiting the Earth presents a significant new challenge to the metrology community. This paper highlights some key measurands and applications driving the uncertainty demand of the climate community in the solar reflective domain, e.g. solar irradiances and reflectances/radiances of the Earth. It discusses how meeting these uncertainties facilitate significant improvement in the forecasting abilities of climate models. After discussing the current state of the art, it describes a new satellite mission, called TRUTHS, which enables, for the first time, high-accuracy SI traceability to be established in orbit. The direct use of a primary standard and replication of the terrestrial traceability chain extends the SI into space, in effect realizing a metrology laboratory in space . Keywords: climate change; Earth observation; satellites; radiometry; solar irradiance

Fox, Nigel↗

Augmenting the SCaN Link Budget Tool with Validated Atmospheric Propagation

In any Earth-Space or Space-Earth communications link, atmospheric effects cause significant signal attenuation. In order to develop a communications system that is cost effective while meeting appropriate performance requirements, it is important to accurately predict these effects for the given link parameters. This project aimed to develop a Matlab(TradeMark) (The MathWorks, Inc.) program that could augment the existing Space Communications and Navigation (SCaN) Link Budget Tool with accurate predictions of atmospheric attenuation of both optical and radio-frequency signals according to the SCaN Optical Link Assessment Model Version 5 and the International Telecommunications Union, Radiocommunications Sector (ITU-R) atmospheric propagation loss model, respectively. When compared to data collected from the Advance Communications Technology Satellite (ACTS), the radio-frequency model predicted attenuation to within 1.3 dB of loss for 95 of measurements. Ultimately, this tool will be integrated into the SCaN Center for Engineering, Networks, Integration, and Communications (SCENIC) user interface in order to support analysis of existing SCaN systems and planning capabilities for future NASA missions.

radio frequency communication↗

Root Cause Analysis of the Data Refinement Process – Medical Conditions Capability Resource Tables

The medical system for spaceflight thus far has been designed to support missions in low earth orbit (LEO). Crew capabilities are limited and heavily dependent on the team of medical support staff at Mission Control Center (MCC) to guide diagnosis and management. However, missions to the Moon and Mars will suffer from several constraints that will make this ground support focused approach to care ineffective. In order to update and modify medical system design, NASA has relied on Probabilistic Risk Assessment (PRA) modeling to mitigate medical risk through trade space analysis. Specifically, capability resource tables (CRT’s) were developed to create a dataset of resources required to manage a list of accepted medical conditions significant in exploration spaceflight. With 120 conditions, this dataset contained hundreds of capabilities and thousands of resources with tens of thousands of cells of data. Initially these tables were built in excel for high throughput during development, but ultimately had to be transferred, managed, and modified into the Evidence Library database for modeling purposes. The process of collating and reviewing the Evidence Library revealed numerous errors in the dataset that had to be corrected through iterative changes. Several error types emerged during this process and can be broken into specific classifications defined as “input”, “transcription”, “structural”, “branching”, and “information”. In reviewing these error types through the root cause analysis (RCA) approach, we were able to identify the contributors to these errors which included single data review points, changing product end goals, limited software selection, time constraints and several others. By reviewing and evaluating the underlying causes we can provide possible system improvements that can be implemented for current and future data management in PRA model inputs.

A. Anderson↗

Multiscale Modeling of Woven Ablative Thermal Protection System Materials

The NASA Entry Systems Modeling project maintains a portfolio of computational model and tool development activities focused on reducing performance uncertainties in ablative Thermal Protection System (TPS) materials for NASA missions. The development activities span material scale and strive to allow microstructural characterization of material structure and properties, mesoscale analyses of damage, and macroscale evaluation of heatshield performance and recession in a given aerothermodynamic environment. This talk will detail the application of developed capabilities at all three scales to the woven TPS material that the Agency has selected as the heatshield for the Mars Sample Return Earth Entry System (MSR-EES) mission – 3D Mid-Density Carbon Phenolic (3MDCP). Each of the applications focuses on driving down uncertainties in material performance and thus risk for MSR-EES and other future missions that may leverage woven TPS. At the microscale, machine learning techniques are used to characterize images from destructive microscopy and inform structural variability. At the mesoscale, Lagrangian techniques are used to simulate ballistic impact and interpret damage modes noted in experiments. At the macroscale, coupled flow-material response techniques are validated by Arc Jet testing to enable heatshield design for missions with massive ablation.

Justin B Haskins↗

The 2004 NASA Aerospace Battery Workshop

Topics covered include: Super NiCd(TradeMark) Energy Storage for Gravity Probe-B Relativity Mission; Hubble Space Telescope 2004 Battery Update; The Development of Hermetically Sealed Aerospace Nickel-Metal Hydride Cell; Serial Charging Test on High Capacity Li-Ion Cells for the Orbiter Advanced Hydraulic Power System; Cell Equalization of Lithium-Ion Cells; The Long-Term Performance of Small-Cell Batteries Without Cell-Balancing Electronics; Identification and Treatment of Lithium Battery Cell Imbalance under Flight Conditions; Battery Control Boards for Li-Ion Batteries on Mars Exploration Rovers; Cell Over Voltage Protection and Balancing Circuit of the Lithium-Ion Battery; Lithium-Ion Battery Electronics for Aerospace Applications; Lithium-Ion Cell Charge Control Unit; Lithium Ion Battery Cell Bypass Circuit Test Results at the U.S. Naval Research Laboratory; High Capacity Battery Cell By-Pass Switches: High Current Pulse Testing of Lithium-Ion; Battery By-Pass Switches to Verify Their Ability to Withstand Short-Circuits; Incorporation of Physics-Based, Spatially-Resolved Battery Models into System Simulations; A Monte Carlo Model for Li-Ion Battery Life Projections; Thermal Behavior of Large Lithium-Ion Cells; Thermal Imaging of Aerospace Battery Cells; High Rate Designed 50 Ah Li-Ion Cell for LEO Applications; Evaluation of Corrosion Behavior in Aerospace Lithium-Ion Cells; Performance of AEA 80 Ah Battery Under GEO Profile; LEO Li-Ion Battery Testing; A Review of the Feasibility Investigation of Commercial Laminated Lithium-Ion Polymer Cells for Space Applications; Lithium-Ion Verification Test Program; Panasonic Small Cell Testing for AHPS; Lithium-Ion Small Cell Battery Shorting Study; Low-Earth-Orbit and Geosynchronous-Earth-Orbit Testing of 80 Ah Batteries under Real-Time Profiles; Update on Development of Lithium-Ion Cells for Space Applications at JAXA; Foreign Comparative Technology: Launch Vehicle Battery Cell Testing; 20V, 40 Ah Lithium Ion Polymer Battery for the Spacesuit; Low Temperature Life-Cycle Testing of a Lithium-Ion Battery for Low-Earth-Orbiting Spacecraft; and Evaluation of the Effects of DoD and Charge Rate on a LEO Optimized 50 Ah Li-Ion Aerospace Cell.

Source record↗

Challenges in Development of Online Visualization and Analysis Tools for Satellite Data

Over the years, various online visualization and analysis tools have been developed to facilitate satellite data access and help scientific users around the world to conduct research and develop applications (e.g., data product evaluation, what-if questions, etc.). For those who are new to satellite data products, using them can be a daunting task due to many obstacles in data processing such as data formats, complex data structures, special software packages, unfamiliar terminology, etc., especially when one is not sure whether a dataset is suitable for his/er research project. Even for experienced users, developing software for data processing and analysis can be a costly and time-consuming task. Online visualization tools can overcome many of these difficulties and allow users to focus on scientific questions. For example, Giovanni (the Geospatial Interactive Online Visualization and Analysis Infrastructure, https://giovanni.gsfc.nasa.gov), developed by the NASA Goddard Earth Sciences Data and Information Services Center (GES DISC), allows access over 1900 satellite and model variables in 82 measurement groups of 8 disciplines without downloading data and software. Main features include basic functions for data analysis and visualization, data provenance, output data in different formats (ASCII, NetCDF, GeoTIFF), and more. Over the years, ~1700 peer-reviewed publications in different disciplines have been benefited from Giovanni in research activities (e.g. initial investigation, what-if questions, product evaluation). Despite the success of online visualization and analysis tools, challenges and new opportunities still exist and more can be done with new requirements and technology. Examples are: a) how to increase the efficiency of dataset search by enhancing intuitive aspects; b) how to facilitate interdisciplinary research; c) how to provide data quality information; d) how to engage users to participate in data quality assessment; and more. NASA Earth Observing System Data and Information System (EOSDIS) satellite-based data products are processed at various levels ranging from Level 0 to Level 4. While most users use data products at higher levels (Level-3 and 4), products at lower levels are still important for case studies, algorithm development, ground validation, etc. In this presentation, we will use Giovanni as an example to present and discuss challenges and near-future opportunities for satellite data online visualization and analysis tools.

Liu, Zhong↗

Landslide Hazard and Exposure Modelling in Data-Poor Regions: The Example of the Rohingya Refugee Camps in Bangladesh

Landslide hazards significantly affect economies and populations around the world, but locations where the greatest proportional losses occur are in data-poor regions where capacity to estimate and prepare for these hazards is most limited. Earth observation (EO) data can fill key knowledge gaps, and can be rapidly used in settings with lower analytical capacity. In this study, we describe a novel series of methods designed to analyze landslide susceptibility, hazard and exposure in the region in and around the Rohingya refugee camps in Bangladesh, where limited data is juxtaposed with a major humanitarian crisis. We demonstrate that a high degree of accuracy is possible even when estimating susceptibility of relatively small landslides. In the context of this example, we also explore how estimates of landslide hazard and exposure are most beneficial to decisions made by humanitarian stakeholders relevant to natural hazards and risk. The unique opportunity to work alongside humanitarian end-users has allowed us to produce focused products that can be tested while in development. In particular, we stress the importance of communicating the difference between a landslide ‘early warning system’ –for which satellite data may be unsuitable at local scales –and a model that provides relative hazard estimates, where EO may be valuable. The toolbox of methods presented here could be used to generate landslide hazard and exposure maps in other data-poor regions around the globe.

R A Emberson↗

MoSST DAS: The First Working Geomagnetic Data Assimilation System

The Earth possesses an internal magnetic field (geomagnetic field) generated by convection in the outer core (geodynamo). Previous efforts have been focused along two distinct paths: (1) numerical geodynamo modeling to understand the origin of the geomagnetic field, and the mechanisms of geomagnetic secular variations (SV); and (2) geomagnetic field modeling to map the spatial/temporal variations of the field from geomagnetic data, and to derive core properties, e.g. inversion of core flow near the core-mantle boundary (CMB). Geomagnetic data assimilation is a new approach emerged over the past 5 years: surface observations are assimilated with geodynamo models for better understanding of the core dynamical state, and accurately prediction of SV. In collaboration with several geomagnetic research groups, we have developed the first working geomagnetic data assimilation system, Modular, Scalable, Self-consistent, and Three-dimensional (MoSST) DAS, that includes the MoSST numerical dynamo model; 7000 years of geomagnetic field maps from several field models utilizing satellite and ground observatory data, historical magnetic records and archeo/paleo magnetic data; and an ensemble based optimal interpolation (01) assimilation algorithm. With this system, we have demonstrated clearly that the assimilated core dynamical state is substantially different from those of pure geodynamo simulations. Ensemble assimilation runs also show the convergence of the assimilated solutions inside the core, suggesting that the simulation state is pulled closer to the truth via data assimilation. The forecasts from this system are also very accurate: the 5-year forecast of the geomagnetic field agrees very well with the observations; and the 5-year secular variation forecast is more accurate than the IGRF SV forecast models in the past. Using geomagnetic records up to 2009, we have made an SV forecast for the period from 2010-2015, and is a candidate SV model for IGRF-11.

Kuang, Weijia↗

Sensitivity of Latent Heating Profiles to Environmental Conditions: Implications for TRMM and Climate Research

The Tropical Rainfall Measuring Mission (TRMM) as a part of NASA's Earth System Enterprise is the first mission dedicated to measuring tropical rainfall through microwave and visible sensors, and includes the first spaceborne rain radar. Tropical rainfall comprises two-thirds of global rainfall. It is also the primary distributor of heat through the atmosphere's circulation. It is this circulation that defines Earth's weather and climate. Understanding rainfall and its variability is crucial to understanding and predicting global climate change. Weather and climate models need an accurate assessment of the latent heating released as tropical rainfall occurs. Currently, cloud model-based algorithms are used to derive latent heating based on rainfall structure. Ultimately, these algorithms can be applied to actual data from TRMM. This study investigates key underlying assumptions used in developing the latent heating algorithms. For example, the standard algorithm is highly dependent on a system's rainfall amount and structure. It also depends on an a priori database of model-derived latent heating profiles based on the aforementioned rainfall characteristics. Unanswered questions remain concerning the sensitivity of latent heating profiles to environmental conditions (both thermodynamic and kinematic), regionality, and seasonality. This study investigates and quantifies such sensitivities and seeks to determine the optimal latent heating profile database based on the results. Ultimately, the study seeks to produce an optimized latent heating algorithm based not only on rainfall structure but also hydrometeor profiles.

Shepherd, J. Marshall↗

US Space VLBI Proposed Outreach Web Site

The study of how VLBI might be pursued in space began in the late 1970's, when it was realized that the size of the earth was a serious limitation to the study of compact radio sources. By going to space, achieving angular resolution at radio wavelengths that could not be obtained with VLBI systems that were limited by the size of the earth, important tests could not be made of quasar models. The technology appeared to be within reach, and an early space VLBI concept, QUASAT, emerged as a joint project, involving both US and European scientists. In 1984, a workshop was held in Gross Enzerdorf, Austria, under joint sponsorship of NASA and the European Space Agency (ESA). The principal conclusion of the workshop was that a VLBI station in space, telemetering its data to ground data stations, working in connection with ground-based radio telescopes, would give the opportunity to achieve angular resolution of a few tens of micro-arc-seconds, and could develop high-quality radio maps of many classes of radio sources. The ground telemetry stations would also function as the source of a stable local oscillator for the spacecraft, which needs a highly stable frequency reference. The Deep Space Network of NASA could play a vital role in both the frequency-locking system and data acquisition. One outcome of the Gross Enzerdorf workshop was the convening, by COSPAR, of an ad hoc Committee on Space VLBI, to review and recommend procedures by which international collaboration on VLBI in space might be coordinated and promoted. In October 1985, the committee met in Budapest and recommended that the Inter-Agency Consultative Group (IACG) would be an appropriate body to coordinate VLBI activities in space. At the same time ESA convened a committee to explore the technical aspects of coordinating ground and space VLBI activities. At this stage both NASA and ESA were supporting preliminary studies of the QUASAT mission, with effective coordination between the two groups. The Soviet Union had also begun planning a mission with the clear intent to fly it as soon as the could; the mission was designated RadioAstron. In December 1985, the Soviets formed an international study team for the RadioAstron mission, holding the first meeting in Moscow. Subsequent meetings of this international committee were held in Budapest in May 1986 and in Moscow in December 1986. Thus, in 1986 there were three VLBI mission concepts under study: the NASA QUASAT mission, an ESA counterpart, and the Soviet RadioAstron mission.

Source record↗

The 1998 to 1999 GEOS-3 Tracking Campaign: Analysis and Results

The GEOS-3 spacecraft was launched by NASA on April 23, 1975. The payload of the gravity-gradient stabilized spacecraft consisted of a radar altimeter, Doppler beacons, and a Laser retroreflector. The GEOS-3 satellite-to-satellite tracking (SST) Doppler data and the satellite laser ranging (SLR) data have been an integral and valuable part of gravity model solutions developed at the Goddard Space Flight Center from GEM 9 through EGM96. GEOS-3 is Located in an unique orbit at 850 km attitude and 115 degrees inclination. The data included in these solutions were acquired from 1975 through 1980. Since 1980, the SLR system precision has improved from 8 to 10 cm in 1980 to the subcm level for the best stations in the 1990's. The ILRS (International laser ranging service) initiated a new tracking campaign for this spacecraft in October 1998, and through January, 1999, some 850 passes and 10,000 normal points were acquired. The quality of the "new" data obtained during this tracking campaign is assessed, and the impact of these "new" data on Earth gravity model solutions is evaluated.

Lemoine, Frank G.↗

Use of microgravity bioreactors for development of an in vitro rat salivary gland cell culture model

During development, salivary gland (SG) cells both secrete factors which modulate cellular behavior and express specific hormone receptors. Whether SG cell growth is modulated by an autocrine epidermal growth factor (EGF) receptor-mediated signal transduction pathway is not clearly understood. SG tissue is the synthesis site for functionally distinct products including growth factors, digestive enzymes, and homeostasis maintaining factors. Historically, SG cells have proven difficult to grow and may be only maintained as limited three-dimensional ductal-type structures in collagen gels or on reconstituted basement membrane gels. A novel approach to establishing primary rat SG cultures is use of microgravity bioreactors originally designed by NASA as low-shear culture systems for predicting cell growth and differentiation in the microgravity environment of space. These completely fluid-filled bioreactors, which are oriented horizontally and rotate, have proven advantageous for Earth-based culture of three-dimensional cell assemblies, tissue-like aggregates, and glandular structures. Use of microgravity bioreactors for establishing in vitro models to investigate steroid-mediated secretion of EGF by normal SG cells may also prove useful for the investigation of cancer and other salivary gland disorders. These microgravity bioreactors promise challenging opportunities for future applications in basic and applied cell research.

NASA Program Space Biology↗