Search NASA⌕ Search

SEARCH · Search NASA

Results for “Enhanced Sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Detonation Soot: A New Class of Ice Nucleating Particle

Abstract Temperatures and pressures from high explosive detonations far exceed atmospheric conditions in typical combustion reactions, and consequently, detonation soot forms with physiochemical properties distinct from soot formed by combustion. In this study, samples of detonation soot from two high explosives, PBX 9502 and Composition B‐3, were analyzed. Ice nucleation experiments on soot collected after controlled detonations were conducted in the laboratory to probe immersion and contact mode freezing. Samples nucleated ice at temperatures warmer than commercially available nanodiamonds, which has a mean nucleation temperature of −20.7°C. Ice nucleation rate coefficients increase rapidly by two to three orders of magnitude below −20°C for every sample. Size‐selected 137 μm diameter particles produced during detonation in an ambient air atmosphere yield bimodal distributions of freezing temperature with primary and secondary nucleation modes centered at −20°C and −13°C, respectively. The presence of a secondary mode allows for enhanced ice nucleation rate coefficients (one to two orders of magnitude greater than samples without a secondary mode) at temperatures outside the influence of the primary mode (>−17°C). Given the observed onset nucleation temperatures of −9.2°C, our results imply that detonation soot of the type studied here would only need to reach an altitude of approximately 4 km to facilitate ice formation.

54 ENVIRONMENTAL SCIENCES↗

On the Structure-Property Relationships of Cation-Exchanged ZK-5 Zeolites for CO 2 Adsorption

The CO 2 adsorption properties of cation-exchanged Li-, Na-, K-, and Mg-ZK-5 zeolites were correlated to the molecular structures determined by Rietveld refinements of synchrotron powder X-ray diffraction patterns. Li-, K-, and Na-ZK-5 all exhibited high isosteric heats of adsorption (Qst) at low CO 2 coverage, with Na-ZK-5 having the highest Qst (ca. 49 kJ mol -1 ). Mg2+ was located at the center of the zeolite hexagonal prism with the cation inaccessible to CO 2 , leading to a much lower Qst (ca. 30 kJ mol-1) and lower overall uptake capacity. Multiple CO 2 adsorption sites were identified at a given CO 2 loading amount for all four cation-exchanged ZK-5 adsorbents. Site A at the flat eight-membered ring windows and site B/B* in the γ-cages were the primary adsorption sites in Li - and Na-ZK-5 zeolites. Relatively strong dual-cation adsorption sites contributed significantly to an enhanced electrostatic interaction for CO 2 in all ZK-5 samples. This interaction gives rise to a migration of Li + and Mg 2+ cations from their original locations at the center of the hexagonal prisms toward the α-cages, in which they interact more strongly with the adsorbed CO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling of CO 2 sequestration in coal seams: Role of CO 2 -induced coal softening on injectivity, storage efficiency and caprock deformation: Original Research Article: Modeling of CO 2 sequestration in coal seams

An effective and safe operation for sequestration of CO 2 in coal seams requires a clear understanding of injection-induced coupled hydromechanical processes such as the evolution of pore pressure, permeability, and induced caprock deformation. In this study, CO 2 injection into coal seams was studied using a coupled flow-deformation model with a new stress-dependent porosity and permeability model that considers CO 2 -induced coal softening. Based on triaxial compression tests of coal samples extracted from the site of the first series of enhanced coalbed methane field tests in China, a softening phenomenon that a substantial (one-order-of-magnitude) decrease of Young's modulus and an increase of Poisson's ratio with adsorbed CO 2 content was observed. Such softening was considered in the numerical simulation through an exponential relation between elastic properties (Young's modulus and Poisson's ratio) and CO 2 pressure considering that CO 2 content is proportional to the CO 2 pressure. Our results of the numerical simulation show that the softening of the coal strongly affects the CO 2 sequestration performance, first by impeding injectivity and stored volume (cumulative injection) during the first week of injection, and thereafter by softening mediated rebound in permeability that tends to increase injectivity and storage over the longer term. A sensitivity study shows that stronger CO 2 -induced coal softening and higher CO 2 injection pressure contribute synergistically to increase a significant increase of CO 2 injectivity and adsorption, but also result in larger caprock deformations and uplift. This study demonstrates the importance of considering the CO 2 -induced softening when analyzing the performance and environmental impact of CO 2 -sequestration operations in unminable coal seams.

54 ENVIRONMENTAL SCIENCES↗

Interfacial thermal conductance between few to tens of layered-MoS 2 and c-Si: Effect of MoS 2 thickness

We report a systematic investigation of interfacial thermal conductance (G k ) between few to tens -layered mechanical exfoliated molybdenum disulfide (MoS 2 ) and crystalline silicon (c-Si). Based on Raman spectroscopy, we find G k at room temperature increases with increased layer numbers of MoS 2 from 0.974 MW m -2 K -1 to 68.6 MW m -2 K -1 . The higher G k of thicker samples reveals their better interface contact with the substrate, leading to accordingly improved interfacial energy coupling. Molecular dynamics (MD) simulations are conducted to interpret and compare with the experimental observations. MD simulations predict a thermal conductance in the range of 53–77 MW m -2 K -1 , which agrees well with the upper bound G k measured in our work. The thickness dependence of measured G k reflects the improved interface spacing for thicker MoS 2 samples. This phenomenon is further confirmed by the Raman intensity enhancement study by the interface spacing and local optical interference calculations.

36 MATERIALS SCIENCE↗

High figure of merit and thermoelectric properties of Bi-doped Mg{sub 2}Si{sub 0.4}Sn{sub 0.6} solid solutions

The study of Mg{sub 2}Si{sub 1−x}Sn{sub x}-based thermoelectric materials has received widespread attention due to a potentially high thermoelectric performance, abundant raw materials, relatively low cost of modules, and non-toxic character of compounds. In this research, Mg{sub 2.16}(Si{sub 0.4}Sn{sub 0.6}){sub 1−y}Bi{sub y} solid solutions with the nominal Bi content of 0≤y≤0.03 are prepared using a two-step solid state reaction followed by spark plasma sintering consolidation. Within this range of Bi concentrations, no evidence of second phase segregation was found. Bi is confirmed to occupy the Si/Sn sites in the crystal lattice and behaves as an efficient n-type dopant in Mg{sub 2}Si{sub 0.4}Sn{sub 0.6}. Similar to the effect of Sb, Bi doping greatly increases the electron density and the power factor, and reduces the lattice thermal conductivity of Mg{sub 2.16}Si{sub 0.4}Sn{sub 0.6} solid solutions. Overall, the thermoelectric figure of merit of Bi-doped Mg{sub 2.16}Si{sub 0.4}Sn{sub 0.6} solid solutions is improved by about 10% in comparison to values obtained with Sb-doped materials of comparable dopant content. This improvement comes chiefly from a marginally higher Seebeck coefficient of Bi-doped solid solutions. The highest ZT∼1.4 is achieved for the y=0.03 composition at 800 K. - Graphical abstract: (a)The relationship between electrical conductivity and power factor for Sb/Bi-doped Mg{sub 2.16}(Si{sub 0.4}Sn{sub 0.6}){sub 1−y}(Sb/Bi){sub y} (0<y≤0.03) solid solutions. (b)The correlation between temperature and the combination of the lattice and the bipolar terms of thermal conductivity of Mg{sub 2.16}(Si{sub 0.4}Sn{sub 0.6}){sub 1−y}Bi{sub y} (0≤y≤0.03) solid solutions. (c)Temperature dependent dimensionless figure of merit ZT of Mg{sub 2.16}(Si{sub 0.4}Sn{sub 0.6}){sub 1−y}Bi{sub y} (0≤y≤0.03) solid solutions. - Highlights: • Bi doped Mg{sub 2.16}Si{sub 0.4}Sn{sub 0.6} showed 15% enhancement in the power factor as compared to Sb doped samples. • Bi doping reduced κ{sub ph} of Mg{sub 2.16}Si{sub 0.4}Sn{sub 0.6} due to stronger point defect scattering. • The highest ZT=1.4 at 800 K was achieved for Mg{sub 2.16}(Si{sub 0.4}Sn{sub 0.6}){sub 0.97}Bi{sub 0.03}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructure evolution, enhanced aging kinetics, and mechanical properties of AA7075 alloy after friction extrusion

In the present study we utilized Friction Extrusion (FE) a solid phase processing technique to produce fully consolidated dense 5 mm rods of AA7075 alloy. The combination of large shear stresses and temperatures at the tool-billet interface during the FE process resulted in the formation of dynamically recrystallized ~2.0 μm equiaxed grains and fine uniformly distributed stable η (MgZn 2 ) precipitates ~25–100 nm in size. Formation of such a microstructure resulted in lower solutionizing temperature and times (flash annealing) as compared to the conventionally extruded counterparts. Here we demonstrate for the first time that the solutionizing times for the T6 heat treatment of AA7075 can be reduced by three times using this FE process. In addition to being an energy efficient process, FE also serves to improve the performance of AA7075 alloys by retaining their strength while enhancing the ductility of the material. The tensile data for samples that were flash annealed and artificially aged after FE processing showed exceptional increase in ultimate tensile strength by over 19% and yield strength by over 59%, compared with an as-FE-processed sample.

36 MATERIALS SCIENCE↗

Grain size induced monoclinic ( Cm ) to rhombohedral ( R3c ) transformation in sodium potassium bismuth titanate ceramics

Here, grain size effect on structure, remnant polarization and piezoelectric constant of lead-free Na 0.4 K 0.1 Bi 0.5 TiO 3 ceramics with grain sizes of 0.58, 0.85, 1.19 and 1.83 pm was investigated. Synchrotron X-ray diffraction in combination with Rietveld refinement was used to examine the structural changes. We have reported an existence of monoclinic ( Cm ) phase at room temperature and discussed the grain size (1.83 → 0.58 μ m) induced structural transformation ( Cm → R3c ) through both intrinsic polarization rotation and adaptive phase theory. Polarization vector in the (11¯0) pc monoclinic plane rotates towards [111] pc with the reduction of grain size. Better domain alignment and large polar variants results enhanced remnant polarization and piezoelectric constant in 1.83 μ m sample.

36 MATERIALS SCIENCE↗

Practical aspects of diffractive imaging using an atomic-scale coherent electron probe

Four-dimensional scanning transmission electron microscopy (4D-STEM) is a technique where a full two-dimensional convergent beam electron diffraction (CBED) pattern is acquired at every STEM pixel scanned. Capturing the full diffraction pattern provides a rich dataset that potentially contains more information about the specimen than is contained in conventional imaging modes using conventional integrating detectors. In this work, using 4D datasets in STEM from two specimens, monolayer MoS 2 and bulk SrTiO 3 , we demonstrate multiple STEM imaging modes on a quantitative absolute intensity scale, including phase reconstruction of the transmission function via differential phase contrast imaging. Finally, practical issues about sampling (i.e. number of detector pixels), signal-to-noise enhancement and data reduction of large 4D-STEM datasets are emphasized.

36 MATERIALS SCIENCE↗

Ultrasound assisted biogas production from landfill leachate

Highlights: • Effect of low frequency ultrasound pretreatment on leachate was investigated. • Three different ultrasound energy inputs (200, 400 and 600 W/l) was applied. • Low-frequency ultrasound treatment increased soluble COD in landfill leachate. • Application of ultrasound to leachate increased biogas production about 40%. • Application of ultrasound to leachate increased total methane production rate about 20%. - Abstract: The aim of this study is to increase biogas production and methane yield from landfill leachate in anaerobic batch reactors by using low frequency ultrasound as a pretreatment step. In the first part of the study, optimum conditions for solubilization of organic matter in leachate samples were investigated using various sonication durations at an ultrasound frequency of 20 kHz. The level of organic matter solubilization during ultrasonic pretreatment experiments was determined by calculating the ratio of soluble chemical oxygen demand (sCOD) to total chemical oxygen demand (tCOD). The sCOD/tCOD ratio was increased from 47% in raw leachate to 63% after 45 min sonication at 600 W/l. Non-parametric Friedman’s test indicated that ultrasonic pretreatment has a significant effect on sCOD parameter for leachate (p < 0.05). In the second part of the study, anaerobic batch reactors were operated for both ultrasonically pretreated and untreated landfill leachate samples in order to assess the effect of sonication on biogas and methane production rate. In anaerobic batch reactor feed with ultrasonically pretreated leachate, 40% more biogas was obtained compared to the control reactor. For statistical analysis, Mann–Whitney U test was performed to compare biogas and methane production rates for raw and pretreated leachate samples and it has been found that ultrasonic pretreatment significantly enhanced biogas and methane production rates from leachate (p < 0.05) in anaerobic batch reactors. The overall results showed that low frequency ultrasound pretreatment can be potentially used for wastewater management especially with integration of anaerobic processes.

54 ENVIRONMENTAL SCIENCES↗

Delineating the Roles of Mn, Al, and Co by Comparing Three Layered Oxide Cathodes with the Same Nickel Content of 70% for Lithium-Ion Batteries

High-nickel layered oxides continue to prevail in the energy storage market as the frontmost cathode candidates for next-generation lithium-ion batteries. Demand and development of LiNi 1–x–y Mn x Co y O 2 (NMC) and LiNi 1–x–y Co x Al y O 2 (NCA) cathodes are rampantly increasing, particularly for the electric vehicle (EV) industry. However, the continued presence of cobalt in NMC and NCA cathodes raises global concerns due to geopolitical and ethical issues attributed to Co sourcing. We herein introduce a novel cobalt-free, high-nickel cathode LiNi 0.7 Mn 0.25 Al 0.05 O 2 (NMA70) and benchmark it against Co-containing LiNi 0.7 Mn 0.15 Co 0.15 O 2 (NMC70) as well as Co- and Al-free LiNi 0.7 Mn 0.3 O 2 (NM70) cathodes with equivalent 70% Ni contents that are all synthesized in-house. NMA70 displays a high initial C/10 capacity of 210 mA h g –1 , matching that of NMC70 in half cells with a cutoff voltage of 4.5 V. NMA70 also exhibits an impressive high-voltage full cell cycling performance with a cutoff voltage of 4.4 V with a nearly identical capacity retention of 83% compared to that of 82% for NMC70 after 300 cycles. Postmortem X-ray photoelectron spectroscopy (XPS), high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), and electron energy loss spectroscopy (EELS) analyses indicate a thinner cathode–electrolyte interface (CEI) developed in NMA70 compared to that in NM70 and unveil a more robust solid-electrolyte interface (SEI) passivation on the graphite anode among all samples. The benefits of Al doping are additionally highlighted with enhanced high-voltage CEI and thermal stabilities in NMA70. Furthermore, this work assesses the roles of Mn, Al, and Co to demonstrate both the practicality and feasibility of synthesizing cobalt-free, high-nickel cathodes that are promising alternatives to current NMC- and NCA-based cathodes.

25 ENERGY STORAGE↗

Magnetic moment evolution and spin freezing in doped BaFe2As2

Fe-K β X-ray emission spectroscopy measurements reveal an asymmetric doping dependence of the magnetic moments μ bare in electron- and hole-doped BaFe 2 As 2 . At low temperature, μ bare is nearly constant in hole-doped samples, whereas it decreases upon electron doping. Increasing temperature substantially enhances μ bare in the hole-doped region, which is naturally explained by the theoretically predicted crossover into a spin-frozen state. Our measurements demonstrate the importance of Hund’s-coupling and electronic correlations, especially for hole-doped BaFe 2 As 2 , as well as the inadequacy of a fully localized or fully itinerant description of the 122 family of Fe pnictides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nanoscale chemical imaging using synchrotron x-ray enhanced scanning tunneling microscopy

The combination of synchrotron radiation with scanning tunneling microscopy provides a promising new concept for chemical imaging of nanoscale structures. It employs detection of local x-ray absorption, which directly yields chemical, electronic, and magnetic sensitivity. The study of the tip current in the far field (800 nm tip/sample separation) shows that insulator-coated tips have to be considered in order to reduce the background from stray photoelectron. A picture of the different channels contributing to the x-ray enhanced STM process is proposed. If during electron tunneling the sample is illuminated with monochromatic x-rays, characteristic absorption will arise, and core electrons are excited, which might modulate the conventional tunnel current and facilitate chemical imaging at the nanoscale.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Improvements to MINOS CCQE Analysis

The MINOS experiment has the world's largest data set of neutrino interactions in the 1-10 GeV energy range. In addition, the data are neutrino interactions on iron, allowing us to explore the nuclear effects on neutrino scattering. We present two improvements to the MINOS charged current quasi-elastic analysis presented at NuInt 2009: a background correction function extracted from two resonance enhanced selections, and an improved fit procedure that includes event samples selected by looking for the recoil proton.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Quasi-two-dimensional Ag nanoparticle formation in silica by Xe ion irradiation and subsequent Ag ion implantation

Ag nanoparticles were fabricated in silica by Xe ion irradiation and subsequent Ag ion implantation, which distributed in a depth range from 4.8 to 14.3 nm, rather than dispersed from surface to a depth of 24.7 nm when no irradiation was made in advance. In addition, the suppression of Ag implants' sputtering loss was also evidenced by a greatly increased Ag content in the prepared sample. These results are mainly due to the defect-enhanced in-beam particle growth. Further, formation of polycrystalline Ag nanoparticles was revealed, whose effect on optical absorption was discussed according to the electron mean-free-path mode.

36 MATERIALS SCIENCE↗

Grating-coupled mid-infrared light emission from tensilely strained germanium nanomembranes

Mechanically stressed nanomembranes are used to demonstrate mid-infrared interband light emission from Ge within the 2.1–2.5 μm atmospheric transmission window. Large biaxial tensile strain is introduced in these samples to convert Ge into a (near-) direct-bandgap semiconductor and to red-shift its luminescence. A diffractive array of Ge pillars is used to outcouple the long-wavelength interband radiation, which is otherwise primarily emitted in the sample plane. An order-of-magnitude strain-induced enhancement in radiative efficiency is also reported, together with the observation of luminescence signatures associated with photonic-crystal cavity modes. These results are promising for the development of silicon-compatible lasers for mid-infrared optoelectronics applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A diamond-based scanning probe spin sensor operating at low temperature in ultra-high vacuum

We present the design and performance of an ultra-high vacuum (UHV) low temperature scanning probe microscope employing the nitrogen-vacancy color center in diamond as an ultrasensitive magnetic field sensor. Using this center as an atomic-size scanning probe has enabled imaging of nanoscale magnetic fields and single spins under ambient conditions. In this article we describe an experimental setup to operate this sensor in a cryogenic UHV environment. This will extend the applicability to a variety of molecular systems due to the enhanced target spin lifetimes at low temperature and the controlled sample preparation under UHV conditions. The instrument combines a tuning-fork based atomic force microscope (AFM) with a high numeric aperture confocal microscope and the facilities for application of radio-frequency (RF) fields for spin manipulation. We verify a sample temperature of <50 K even for strong laser and RF excitation and demonstrate magnetic resonance imaging with a magnetic AFM tip.

36 MATERIALS SCIENCE↗

Metallic 1T phase source/drain electrodes for field effect transistors from chemical vapor deposited MoS{sub 2}

Two dimensional transition metal dichalcogenides (2D TMDs) offer promise as opto-electronic materials due to their direct band gap and reasonably good mobility values. However, most metals form high resistance contacts on semiconducting TMDs such as MoS{sub 2}. The large contact resistance limits the performance of devices. Unlike bulk materials, low contact resistance cannot be stably achieved in 2D materials by doping. Here we build on our previous work in which we demonstrated that it is possible to achieve low contact resistance electrodes by phase transformation. We show that similar to the previously demonstrated mechanically exfoliated samples, it is possible to decrease the contact resistance and enhance the FET performance by locally inducing and patterning the metallic 1T phase of MoS{sub 2} on chemically vapor deposited material. The device properties are substantially improved with 1T phase source/drain electrodes.

36 MATERIALS SCIENCE↗

Effects of inter-nanocrystal distance on luminescence quantum yield in ensembles of Si nanocrystals

The absolute photoluminescence (PL) quantum yield (QY) of multilayers of Silicon nanocrystals (SiNCs) separated by SiO{sub 2} barriers were thoroughly studied as function of the barrier thickness, excitation wavelength, and temperature. By mastering the plasma-enhanced chemical vapor deposition growth, we produce a series of samples with the same size-distribution of SiNCs but variable interlayer barrier distance. These samples enable us to clearly demonstrate that the increase of barrier thickness from ∼1 to larger than 2 nm induces doubling of the PL QY value, which corresponds to the change of number of close neighbors in the hcp structure. The temperature dependence of PL QY suggests that the PL QY changes are due to a thermally activated transport of excitation into non-radiative centers in dark NCs or in the matrix. We estimate that dark NCs represent about 68% of the ensemble of NCs. The PL QY excitation spectra show no significant changes upon changing the barrier thickness and no clear carrier multiplication effects. The dominant effect is the gradual decrease of the PL QY with increasing excitation photon energy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗