Search NASA⌕ Search

SEARCH · Search NASA

Results for “Extraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Potassium carbonate decomposition modeling within rotating detonation engines for direct power extraction applications

We report that recently, there has been a significant interest in detonation-based combustion systems, such as rotating detonation engines (RDE), due to potential performance advantages in propulsion and energy applications. This includes improvements in thermodynamic efficiency, inherently high gas velocities, and the possibility of achieving an increase in total pressure (i.e. pressure gain) through the combustion process. Due to approximating a constant volume combustion process, these devices also tend to exhibit extremely high local gas temperatures relative to a comparable constant pressure combustor. These advantages overlap well with desirable performance characteristics of direct power extraction (DPE) technologies, such as a magnetohydrodynamic (MHD) generator. Typically, in DPE systems hot combustion products are seeded with an easily ionizable material such as potassium carbonate (K 2 CO 3 ) in order to boost the electrical conductivity. However, due to the short gas residence times within an RDE, it was unclear whether forming an electrically conductive combustion plasma would be feasible for integration with a downstream MHD generator. A model is presented which describes the heating, decomposition, and ionization of solid K 2 CO 3 particles and aqueous solutions of K 2 CO 3 in water, for a given initial particle diameter. This model was combined with available computational fluid dynamics (CFD) data for an oxygen-methane RDE in a one-way coupled Eulerian-Lagrangian framework to predict particle trajectories and the corresponding heating, decomposition, and ionization histories. Electrical conductivities were computed using a previously developed model, and a method was proposed to determine an equivalent average electrical conductivity. Results show that particle sizes below ~30 µm are able to fully decompose before reaching the exit of the RDE. While the one-way coupled nature of the simulations precluded rigorous evaluation of the effects of seed material on detonability, a substantial temperature reduction is expected at the detonation wave front due to heating and decomposition. A preliminary comparison is presented between the RDE and an equivalent constant pressure adiabatic combustor, showing a potential performance advantage for the RDE.

42 ENGINEERING↗
DOE OSTI2018

Oil extraction in the Amazon basin and exposure to metals in indigenous populations

Highlights: • We assessed the body burdens of metals in two kukama communities after oil spills. • Median Hg levels were above values recommended by the Peruvian Ministry of Health. • 50% of the population had Hg levels higher than those recommended. • 17% of the study population had Cd levels higher than those recommended. • Oil spills may be a source of exposure to metals but other sources may contribute. Most oil extraction areas in the Peruvian Amazon are within indigenous territories. Poor environmental practices have exposed the indigenous population to metals. We conducted a survey in two indigenous Kukama communities to assess body burdens of metals after the occurrence of two major oil spills in 2014. Urine levels above those recommended by the Peruvian Ministry of Health were observed in 50% and 17% of the study population for mercury and cadmium, respectively.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Plasticizer, di(2-ethylhexyl)phthalate (DEHP) enhances cockroach allergen extract-driven airway inflammation by enhancing pulmonary Th2 as well as Th17 immune responses in mice

Highlights: • DEHP enhances CE-induced airway inflammation/mucus secretion in mice. • DEHP enhances expression of costimulatory molecules on dendritic cells. • DEHP enhances expression of pro-inflammatory cytokines in dendritic cells. • DEHP down regulates expression of E-cadherin in airway epithelial cells. In recent decades, there has been a gradual increase in the prevalence of asthma. Various factors including environmental pollutants have contributed to this phenomenon. Plasticizer, di(2-ethylhexyl)phthalate (DEHP) is one of the commonest environmental pollutants due to its association with plastic products. DEHP gets released from plastic products easily leading to respiratory exposure in humans. As a consequence, DEHP is associated with allergic asthma in humans and animals. DEHP is reported to act as an adjuvant in ovalbumin-induced mouse models of asthma at high doses. However, these studies mostly looked into the role of DEHP on Th2 cytokines/eosinophilic inflammation without investigating the role of airway epithelial cells (AECs)/dendritic cells (DCs)/Th17 cells. Its adjuvant activity with natural allergens such as cockroach allergens at tolerable daily intake needs to be explored. Cockroach allergens and DEHP may be inhaled together due to their coexistence in work place as well as household environments. Therefore, effect of DEHP was assessed in cockroach allergens extract (CE)-induced mouse model of asthma. Airway inflammation, histopathology, mucus secretion, and immune responses related to Th2/Th17/DCs and AECs were assessed in mice with DEHP exposure alone and in combination with CE. Our study shows that DEHP converts CE-induced eosinophilic inflammation into mixed granulocytic inflammation by promoting Th2 as well as Th17 immune responses. This was probably due to downregulation of E-cadherin in AECs, and enhancement of costimulatory molecules (MHCII/CD86/CD40)/pro-inflammatory cytokines (IL-6/MCP-1) in DCs by DEHP. This suggests that DEHP facilitates development of mixed granulocytic airway inflammation in the presence of a natural allergen.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Investigating the role of water on CO2-Utica Shale interactions for carbon storage and shale gas extraction activities – Evidence for pore scale alterations

In this work, we probed the physical and chemical alteration of the carbonate-rich Utica Shale following CO 2 exposure when thin films of water were present at the shale surface. All reaction conditions were examined at 40 °C and CO 2 pressures up to 10.3 MPa for 14 days. CO 2 dissolution in the water layer at 2342 cm -1 and carbonate dissolution and precipitation at 1424, 874, and 712 cm -1 were discerned with in-situ Fourier Transform infrared spectroscopy (FT-IR). Significant etching and pitting from exposure to CO 2 and water were observed with feature relocation scanning electron microscopy (SEM). Application of the density function theory (DFT) for pore size analysis showed that micropores between approximately 0.9 and 2 nm disappeared while the mesopore volume increased after dissolution of carbonate. These results may provide new insights that carbonate rich shales such as the Utica may have a greater potential for alterations of pore space due to the reactivity of CO 2 which may affect 1) how CO 2 storage in shale formations plays a role in Carbon Capture and Storage (CCS) activities, 2) if CO 2 can be utilized as a potential fracturing agent, and 3) whether CO 2 is an effective fluid for enhanced hydrocarbon extraction.

04 OIL SHALES AND TAR SANDS↗
DOE OSTI2016

Opportunities for increasing CO 2 storage in deep, saline formations by active reservoir management and treatment of extracted formation water: Case study at the GreenGen IGCC facility, Tianjin, PR China

Carbon capture, utilization and storage (CCUS) seeks beneficial applications for CO 2 recovered from fossil fuel combustion. This study evaluated the potential for removing formation water to create additional storage capacity for CO 2 , while simultaneously treating the produced water for beneficial use. Furthermore, the process would control pressures within the target formation, lessen the risk of caprock failure, and better control the movement of CO 2 within that formation. The project plans to highlight the method of using individual wells to produce formation water prior to injecting CO 2 as an efficient means of managing reservoir pressure. Because the pressure drawdown resulting from pre-injection formation water production will inversely correlate with pressure buildup resulting from CO 2 injection, it can be proactively used to estimate CO 2 storage capacity and to plan well-field operations. The project studied the GreenGen site in Tianjin, China where Huaneng Corporation is capturing CO 2 at a coal fired IGCC power plant. Known as the Tianjin Enhanced Water Recovery (EWR) project, local rock units were evaluated for CO 2 storage potential and produced water treatment options were then developed. Average treatment cost for produced water with a cooling water treatment goal ranged from 2.27 to 2.96 US$/m 3 (recovery 95.25%), and for a boiler water treatment goal ranged from 2.37 to 3.18 US$/m 3 (recovery 92.78%). Importance analysis indicated that water quality parameters and transportation are significant cost factors as the injection-extraction system is managed over time. Our study found that in a broad sense, active reservoir management in the context of CCUS/EWR is technically feasible. In addition, criteria for evaluating suitable vs. unsuitable reservoir properties, reservoir storage (caprock) integrity, a recommended injection/withdrawal strategy and cost estimates for water treatment and reservoir management are proposed.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Photosynthesis of silver nanoparticles using Durio zibethinus aqueous extract and its application in catalytic reduction of nitroaromatics, degradation of hazardous dyes and selective colorimetric sensing of mercury ions

Highlights: • Sunlight mediated synthesis of silver nanoparticles. • dAgNPs serves as an excellent catalyst to degrade organic dyes. • The degraded organic dyes are nontoxic. • dAgNPs colorimetrically detects mercury ions at micromolar concentration. - Abstract: A simple green route was reported to prepare highly stable silver nanoparticles. The aqueous leaf extract of Durio zibethinus reduces Ag+ to Ag0 in the presence of natural sunlight. The capping and stabilization of dAgNPs by the phytoconstituents of Durio zibethinus was confirmed by FTIR. TEM confirms that the dAgNPs are spherical in shape with a size range between 10–25 nm. XRD pattern confirmed that the dAgNPs are arranged in the face-centred cubic structure. The catalytic activity of the dAgNPs was proved by sodium borohydride mediated reduction of nitro aromatic compounds and degradation hazardous organic dyes. The reaction kinetics was analysed by pseudo-first order equation. Regardless of the efficacy of degrading organic dyes, we showed by zebrafish mortality assay that the toxicity of the dye degraded water reduced drastically. Besides catalysis, the dAgNPs has the potential to selective colorimetric sensing of hazardous mercury ion in aqueous solution.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Hyperspectral imaging for real-time waste materials characterization and recovery using endmember extraction and abundance detection

Hyperspectral imaging, combined with advanced spectral unmixing techniques and artificial intelligence, offers a powerful solution for improving material identification and classification. Here, this study evaluates the effectiveness of the pixel purity index and the sequential maximum angle convex cone algorithms in extracting and validating spectral signatures from pure samples of paper components (cellulose and lignin) and plastic (polypropylene). Principal-component analysis showed that both algorithms captured nearly all relevant variance for the tested materials. Spectral signatures were compared using the spectral angle mapper, revealing high similarity in the short-wave infrared region and greater variability in the visible near-infrared range. The methodology was then applied to a disposable coffee cup to detect and quantify mixed materials, accurately estimating material abundance and object area with less than 1% error. This approach enhances material classification, supporting product verification, quality control, and automated sorting for sustainable waste management and resource recovery.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Mechanistic mass transfer in hollow fiber membrane solvent extraction for bio-based isobutanol

Membrane solvent extraction (MSE) has emerged as a promising method for selectively recovering bioproducts from complex aqueous streams. Bio-isobutanol, a next-generation feedstock for biofuel, remains challenging to recover because of its low concentration and the presence of inhibitory substances. This study explores the potential of hollow fiber (HF) MSE for bio-isobutanol recovery and systematically examines the coupled effects of fiber packing, shell-side flow dynamics, and aqueous chemistry on performance. A resistance-in-series model is applied to understand mass transfer in the HF MSE modules, quantify local resistances, and validate overall performance. The results show that increasing the fiber packing provides a larger interfacial area but induces poor flow distribution and channeling, hindering effective isobutanol transport. Meanwhile, increasing the shell-side velocity improves isobutanol recovery due to reductions in the boundary layer thickness. The presence of salts, added to mimic fermentation broth, increases the partition coefficient through salting-out effects, further improving isobutanol flux. A modified correlation for the shell-side mass transfer coefficient (k s,ϕ+v ), integrating geometric and hydrodynamic effects, was developed and validated. The proposed model achieves highly predictive accuracy (r 2 = 0.9808) across a wide range of conditions, outperforming previous models. The findings provide mechanistic insight into the interaction of geometric packing, hydrodynamics, and chemistry in governing mass transfer in HF MSE. Overall, this work demonstrates the potential of HF MSE for efficient bio-isobutanol recovery and also provides practical guidelines on critical factors (packing fraction, partition coefficient, and shell-side velocity), aiding in the design and scaling of MSE systems for resource recovery.

Aqueous chemistry↗
DOE OSTI2021

High-salinity brine desalination with amine-based temperature swing solvent extraction: A molecular dynamics study

Solvent extraction desalination (SED) is a promising technique for efficiently treating high salinity brines. However, only a few studies in the literature have investigated the influence of the molecular characteristics of the organic solvents on the emergent performance of the separation process. Thus, in this work we investigate the influence of the molecular structure of four different secondary amines on the desalination process of a concentrated aqueous solution of NaCl. Molecular dynamics simulations and free energy calculations are used to obtain the thermodynamic and structural properties of the pure solvent bulk phase, as well as a homogeneous solvent-water bulk mixture. Furthermore, solvent-water and solvent-brine interfacial systems are used to explicitly analyze the water partitioning behavior in the relevant temperature range for SED. The water solubilization in these secondary amines is found to be an exothermic process. Additionally, although the hydrogen-bonding interaction between the water and solvent molecules are beneficial, this interaction is not necessarily the dominant factor for ranking the water solubility performance of the different solvents. Finally, the excess volume of mixing of the bulk solvent-water mixture, as well as the electrostatic surface features of the solvents are also found to provide important clues for screening solvent behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Tutorial: Extracting entanglement signatures from neutron spectroscopy

This tutorial is a pedagogical introduction to recent methods of computing quantum spin entanglement witnesses from spectroscopy, with a special focus on neutron scattering on quantum spin systems. We offer a brief introduction to the concepts and equations, define a data analysis protocol, and discuss the interpretation of three entanglement witnesses: one-tangle, two-tangle, and Quantum Fisher Information. We also discuss practical experimental considerations, and give three examples of extracting entanglement witnesses from experimental data: Copper Nitrate, KCuF 3 , and NiPS 3 .

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Utilizing the unique charge extraction properties of antimony tin oxide nanoparticles for efficient and stable organic photovoltaics

Simultaneously enhancing device performance and longevity, as well as balancing the requirements on cost, scalability, and simplification of processing, is the goal of interface engineering of organic solar cells (OSCs). In our work, we strategically introduce antimony (Sb 3+ ) cations into an efficient and generic n-type SnO 2 nanoparticles (NPs) host during the scalable flame spray pyrolysis synthesis. Accordingly, a significant switch of conduction property from an n-type character to a p-type character is observed, with a corresponding shift in the work function (WF) from 4.01 ± 0.02 eV for pristine SnO 2 NPs to 5.28 ± 0.02 eV for SnO 2 NPs with 20 mol. % Sb content (ATO). Both pristine SnO 2 and ATO NPs with fine-tuned optoelectronic properties exhibit remarkable charge carrier extraction properties, excellent UV resistance and photo-stability being compatible with various state-of-the-art OSCs systems. The reliable and scalable pristine SnO 2 and ATO NPs processed by doctor-blading in air demand no complex post-treatment. Our work offers a simple but unique approach to accelerate the development of advanced interfacial materials, which could circumvent the major existing interfacial problems in solution-processed OSCs.

14 SOLAR ENERGY↗
DOE OSTI2018

The ORNL analysis technique for extracting β -delayed multi-neutron branching ratios with BRIKEN

Here, many choices are available in order to evaluate large radioactive decay networks. There are many parameters that influence the calculated -decay delayed single and multi-neutron emission branching fractions. We describe assumptions about the decay model, background, and other parameters and their influence on β-decay delayed multi-neutron emission analysis. An analysis technique, the ORNL BRIKEN analysis procedure, for determining -delayed multi-neutron branching ratios in β-neutron precursors produced by means of heavy-ion fragmentation is presented. The technique is based on estimating the initial activities of zero, one, and two neutrons occurring in coincidence with an ion-implant and β trigger. The technique allows one to extract β-delayed multi-neutron decay branching ratios measured with the 3 He BRIKEN neutron counter. As an example, two analyses of the -neutron emitter 77 Cu based on different a priori assumptions are presented along with comparisons to literature values.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Design and production of the high voltage electrode grids and electron extraction region for the LZ dual-phase xenon time projection chamber

The dual-phase xenon time projection chamber (TPC) is a powerful tool for direct-detection experiments searching for WIMP dark matter, other dark matter models, and neutrinoless double-beta decay. Successful operation of such a TPC is critically dependent on the ability to hold high electric fields in the bulk liquid, across the liquid surface, and in the gas. Careful design and construction of the electrodes used to establish these fields is therefore required. We present the design and production of the LUX-ZEPLIN (LZ) experiment's high-voltage electrodes, a set of four woven mesh wire grids. Grid design drivers are discussed, with emphasis placed on design of the electron extraction region. Here, we follow this with a description of the grid production process and a discussion of steps taken to validate the LZ grids prior to integration into the TPC.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

Extracting low energy signals from raw LArTPC waveforms using deep learning techniques — A proof of concept

Here, we investigate the feasibility of using deep learning techniques, in the form of a one-dimensional convolutional neural network (1D-CNN), for the extraction of signals from the raw waveforms produced by the individual channels of liquid argon time projection chamber (LArTPC) detectors. A minimal generic LArTPC detector model is developed to generate realistic noise and signal waveforms used to train and test the 1D-CNN, and evaluate its performance on low-level signals. We demonstrate that our approach overcomes the inherent shortcomings of traditional cut-based methods by extending sensitivity to signals with ADC values below their imposed thresholds. This approach exhibits great promise in enhancing the capabilities of future generation neutrino experiments like DUNE to carry out their low-energy neutrino physics programs.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2020

Interplaying mechanisms behind inclusive jet R and extraction of jet energy loss distributions

The observed inclusive jet suppression in heavy-ion collisions at LHC has a very weak p T dependence over a large range of p T =50–1000 GeV and is almost independent of the colliding energy, though the initial energy density of the bulk medium has increased from √s=2.76 to 5.02 TeV by about 20%. This interesting phenomenon is investigated in the linear Boltzmann transport (LBT) model for jet propagation in an event-by-event 3+1D hydro background. We show that the p T dependence of jet R AA is determined by the initial spectrum in p+p collisions and p T dependence of jet energy loss. Furthermore, jet energy loss distributions for inclusive jet and γ-jet at both LHC energies are extracted directly from experimental data through the state-of-art Bayesian analysis. Additionally, the averaged jet energy loss has a weak p T dependence and the scaled jet energy loss distributions have a large width, both of which are consistent with the LBT simulations and indicate that jet quenching is caused by only a few out-of-cone jet medium scatterings.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2016

sin 2 θ eff lept and M W (indirect) extracted from 9 fb -1 μ + μ - event sample at CDF

Here, we report on the extraction of $\sin^2\theta^{\rm lept}_{\rm eff}$ and indirect measurement of the mass of the W boson from the forward-backward asymmetry of $\mu^+\mu^-$ events in the $Z$ boson mass region. The data sample collected by the CDF detector corresponds to the full 9 fb$^{-1}$ run II sample. We measure $\sin^2 \theta^{\rm lept}_{\rm eff} = 0.2315 \pm 0.0010$, $ \sin^2 \theta_W = 0.2233 \pm 0.0009$ and $M_W ({\rm indirect}) = 80.365 \pm 0.047 \;{\rm GeV}/c^2$, where each uncertainty includes both statistical and systematic contributions. Comparison with the results of the D0 collaboration are presented.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Novel Rosenbluth extraction framework for Compton form factors from deeply virtual exclusive experiments

We use a generalization of the Rosenbluth separation method for a model independent simultaneous extraction of the Compton Form Factors $\mathscr{H}$ and $\mathscr{E}$ from virtual Compton scattering data on an unpolarized target. A precise evaluation of $\mathscr{H}$ and $\mathscr{E}$ enabled by the proposed method, is the first step towards pinning down the distribution of angular momentum inside the proton.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Elucidating the challenges in extracting ultra-slow flame speeds in a closed vessel - A CH 2 F 2 microgravity case study using optical and pressure-rise data

Refrigerants with a low global warming potential (GWP) possess mild flammability. Hence, a fundamental understanding of their combustion characteristics is required to assess their fire-hazardous potential. The laminar burning velocity is one fundamental property to describe these under safety evaluation aspects. However, measuring laminar burning velocities for slow-burning components, such as low-GWP alternatives, is challenging. This is due to influencing effects such as buoyant flame deformation, stretch, radiation, and confinement, especially at the flammability limits. Here, in the present study, we investigated near-limit flames of the representative refrigerant difluoromethane (CH 2 F 2 ) with nitrogen-enriched oxidizer mixtures to elucidate the potentials and limitations at ultra-slow flame speeds of two widely used flame speed measurement methods in the closed vessel configuration: the optical flame speed measurement in the early quasi-isobaric regime and the flame speed determination from the pressure-rise during the later phase of the isochoric combustion process. Experiments were performed under terrestrial- and microgravity, conducted in a specially designed setup suitable for drop tower applications, using both methods in parallel. Recommendations for the extraction of flame speed data are derived from the non-buoyant reference investigations under microgravity and transferred to ultra-slow flames at terrestrial gravity. Near-limit flames under microgravity were found to be significantly affected by stretch effects for the optical method so that flame speed extrapolations to unstretched conditions are prone to errors. Stretch also affects the pressure method’s lower evaluation limit, and errors can be estimated by combining flame speed data from the pressure method and Markstein lengths from optical experiments.

42 ENGINEERING↗