Search NASA⌕ Search

SEARCH · Search NASA

Results for “Flybys”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Performance of three-way data types during Voyager's encounter with Neptune

Voyager's flyby of Neptune in August of 1989 was the most distant planetary encounter ever achieved. Round trip light travel time was more than eight hours, exceeding view periods at two of the three tracking station sites. Consequently, the majority of radiometric tracking was accomplished by transmitting the uplink from one station, and receiving the downlink at a different station. This procedure defines three-way data. Dependence on three-way data for orbit determination is one distinguishing element of Voyager's successful encounter with Neptune. This paper addresses the performance of three-way range and Doppler data supporting pre-encounter orbit determination and post-encounter orbit reconstruction. Also, calibrations which reduce systematic errors inherent to three-way data are described and analyzed.

Roth, D. C.↗

Voyager 2 orbit determination at Neptune

In August 1989 the Voyager 2 spacecraft encountered Neptune and Triton. Precise knowledge of the trajectory of the spacecraft relative to the Neptunian system was essential to ensure successful observations during the flyby, and to perform trajectory control. Determination of the orbit of Voyager 2 with respect to the Neptunian system was accomplished by the use of radiometric Doppler, range, and VLBI observations of the spacecraft in combination with spacecraft-based optical observations of Neptune, Triton, Nereid, and the Voyager-discovered satellite 1989N1. These data types were used in a new version of the JPL Orbit Determination Program to determine the orbit of the spacecraft as well as Neptunian system ephemerides and dynamical parameters, resulting in accurate delivery of the spacecraft to targeted conditions at Neptune and Triton.

Lewis, G. D.↗

Deep atmospheric probe missions to Uranus and Neptune

The impressive results of the Voyager 2 flybys of Uranus (January 1986) and Neptune (August 1989) revealed many surprises and produced a new set of scientific questions regarding the formation and evolution of the planets, their atmospheres, the rings that surround them, and their satellite systems. A new set of intensive exploration missions to these outer planets is currently being examined by NASA and the scientific community. These missions, like Galileo to Jupiter and Cassini to Saturn, are to provide longer-term high-resolution orbital observations together with in situ atmospheric measurements. This paper will examine the feasibility of using deep atmospheric probes in connection with orbital missions to Uranus and Neptune to obtain the desired scientific measurements down to atmospheric pressure levels of at least 200 bars. The key design parameters of the atmospheric mission and system are defined, examined in some detail, and feasible options are suggested for further study.

Swenson, Byron L.↗

Whistlers in Neptune's magnetosphere: Evidence of atmospheric lightning

During the Voyager 2 flyby of Neptune, a series of 16 whistler-like events were detected by the plasma wave instrument near closest approach. These events were observed at radial distances from 1.30 to 1.99 R sub N and magnetic latitudes from -7 to 33 deg. The frequencies ranged from 6.1 to 12.0 kHz, and the dispersions fit the Eckersley law for lightning-generated whistlers. Lightning in the atmosphere of Neptune is the only known source of such signals. The frequency range of the whistlers (up to 12 kHz) indicates that the local electron densities are substantially higher (N sub e greater than 30 t0 100 per cu cm) than indicated by the in situ plasma measurements. The dispersion of the whistlers is very large, typically 26,000 sec Hz(exp 0.5). Based on existing plasma density models and measurements, the dispersions are too large to be accounted for by a single direct path from the lightning source to the spacecraft. Therefore, multiple bounces from one hemisphere to the other are required. The most likely propagation path probably involves a lightning source on the dayside of the planet, with repeated bounces through the dense dayside ionosphere at low L-values.

Gurnett, D. A.↗

Mission management, planning, and cost: PULSE Attitude And Control Systems (AACS)

The Pluto unmanned long-range scientific explorer (PULSE) is a probe that will do a flyby of Pluto. It is a low weight, relatively low costing vehicle which utilizes mostly off-the-shelf hardware, but not materials or techniques that will be available after 1999. A design, fabrication, and cost analysis is presented. PULSE will be launched within the first decade of the twenty-first century. The topics include: (1) scientific instrumentation; (2) mission management, planning, and costing; (3) power and propulsion systems; (4) structural subsystem; (5) command, control, and communication; and (6) attitude and articulation control.

Source record↗

Effect of wind and temperature gradients on received acoustic energy

The effect of refraction due to wind and temperature gradients on energy received from low flying aircraft is examined. A series of helicopter and jet flyby's were recorded with a microphone array on two separate days, each with distinctly different meteorological conditions. Energy in the 100 to 200 Hertz band is shown as a function of aircraft range from the array, and compared with the output of the Fast Field Program.

Brienzo, Richard K.↗

An unmanned probe to Pluto

Now that Voyager II has completed its grand tour of the solar system, all the planets in the solar system, with the exception of Pluto, have been studied. Even now, missions to return to Mercury, Venus, Mars Jupiter, and Saturn are currently flying or are planned. However, a mission to explore Pluto is not, at the present time, being considered seriously. The design problem presented to the students was very general, i.e., design an unmanned mission to Pluto with a launch window constraint of the years 2000 to 2010. All other characteristics of the mission, such as mission type (flyby, orbiter, lander, penetrator), scientific objectives and payload, and the propulsion system were to be determined by the design teams. The design studies exposed several general problems to be solved. Due to the extreme distance to Pluto (and a corresponding travel time in the range of 10 to 25 years), the spacecraft had to be lighter and more robust than current spacecraft designs. In addition, advanced propulsion concepts had to be considered. These included the new generation of launch vehicles and upper stages and nuclear electric propulsion. The probe design offered an abundance of synthesis and analysis problems. These included sizing trade studies, selection of subsystem components, analysis of spacecraft dynamics, stability and control, structural design and material selection, trajectory design, and selection of scientific equipment. Since the characteristics of the mission, excluding the launch window, were to be determined by the design teams, the solutions varied widely.

Source record↗

Compressed/reconstructed test images for CRAF/Cassini

A set of compressed, then reconstructed, test images submitted to the Comet Rendezvous Asteroid Flyby (CRAF)/Cassini project is presented as part of its evaluation of near lossless high compression algorithms for representing image data. A total of seven test image files were provided by the project. The seven test images were compressed, then reconstructed with high quality (root mean square error of approximately one or two gray levels on an 8 bit gray scale), using discrete cosine transforms or Hadamard transforms and efficient entropy coders. The resulting compression ratios varied from about 2:1 to about 10:1, depending on the activity or randomness in the source image. This was accomplished without any special effort to optimize the quantizer or to introduce special postprocessing to filter the reconstruction errors. A more complete set of measurements, showing the relative performance of the compression algorithms over a wide range of compression ratios and reconstruction errors, shows that additional compression is possible at a small sacrifice in fidelity.

Dolinar, S.↗

Design concepts and performance of NASA X-band (7162 MHz/8415 MHz) transponder for deep-space spacecraft applications

The design concepts and measured performance characteristics are summarized of an X band (7162 MHz/8415 MHz) breadboard deep space transponder (DSP) for future spacecraft applications, with the first use scheduled for the Comet Rendezvous Asteroid Flyby (CRAF) and Cassini missions in 1995 and 1996, respectively. The DST consists of a double conversion, superheterodyne, automatic phase tracking receiver, and an X band (8415 MHz) exciter to drive redundant downlink power amplifiers. The receiver acquires and coherently phase tracks the modulated or unmodulated X band (7162 MHz) uplink carrier signal. The exciter phase modulates the X band (8415 MHz) downlink signal with composite telemetry and ranging signals. The receiver measured tracking threshold, automatic gain control, static phase error, and phase jitter characteristics of the breadboard DST are in good agreement with the expected performance. The measured results show a receiver tracking threshold of -158 dBm and a dynamic signal range of 88 dB.

Mysoor, N. R.↗

Lunar maria and related deposits: Preliminary Galileo imaging results

During the Earth-Moon flyby the Galileo Solid State Imaging system obtained new information on lunar media. Imaging data in spectral bands from 0.4 to 1.0 micron wavelength provide color data for deposits on the western limb. General objectives were to determine the composition and stratigraphy of mare and related deposits for areas not previously seen well in color, and to compare the results with well-studied nearside maria. Initial results from images reduced with preliminary calibrations show that Galileo spectral reflectance data are consistent with previous earthbased observations.

Greeley, R.↗

Orientale and South Pole-Aitken basins on the Moon: Preliminary Galileo imaging results

During the Earth-Moon flyby the Galileo Solid State Imaging System obtained new information on the landscape and physical geology of the Moon. Multicolor Galileo images of the Moon reveal variations in color properties of the lunar surface. Using returned lunar samples as a key, the color differences can be interpreted in terms of variations in the mineral makeup of the lunar rocks and soil. The combined results of Apollo landings and multicolor images from Galileo allow extrapolation of surface composition to areas distant from the landing sites, including the far side invisible from Earth.

Head, J.↗

Triton: A hot potato

The effect of sunlight on the surface of Triton was studied. Widely disparate models of the active geysers observed during Voyager 2 flyby were proposed, with a solar energy source almost their only feature. Yet Triton derives more of its heat from internal sources (energy released by the radioactive decay) than any other icy satellite. The effect of this relatively large internal heat on the observable behavior of volatiles on Triton's surface is investigated. The following subject areas are covered: the Global Energy Budget; insulation polar caps; effect on frost stability; mantle convection; and cryovolcanism.

Kirk, R. L.↗

Results from the comet Giacobini-Zinner and Halley campaigns

The spacecraft flybys of Comets Giacobini-Zinner and Halley were highly successful. Many untested theories were confirmed and additional clues provided to decide between competing models, but without leading to a clear preference. New questions were also raised. Based on the improved knowledge, research efforts will now be much better focused than was possible before the encounters. Moreover, interpretation of the Earth-based (ground-based, airborne, rocket-borne, and Earth satellite) observations should be improved. The goals of the workshop are defined in terms of the results from spacecraft measurements and Earth-based observations of Comets Giacobini-Zinner and Halley. A summary is presented of the new knowledge about the nucleus, the coma gas and dust, and the plasma. It is realized that extreme caution must be used when generalizing results from the Comet Giacobini-Zinner and Halley investigations to comets universally. The many surprises of the successful missions, the dangers inherent in generalizations to other comets, and the many still open and new questions are the reasons for the need of further spacecraft investigations. However, an unquestionably successful start was made in expanding the knowledge about the physics and chemistry of comets and all the related implications, and the question about the similarities of and differences between comets can now be explored further.

Huebner, Walter F.↗

Characterizing water/rock interaction in simulated comet nuclei via calorimetry: Tool for in-situ science, laboratory analysis, and sample preservation

Although results from the Giotto and Vega spacecraft flybys of comet P/Halley indicate a complex chemistry for both the ices and dust in the nucleus, carbonaceous chondrite meteorites are still regarded as useful analogs for the rocky components. Carbonaceous chondrites mixed with water enable simulation of water/rock interactions which may occur in cometary nuclei. Three general types of interactions can be expected between water and minerals at sub-freezing temperatures: heterogeneous nucleation of ice by insoluble minerals; adsorption of water vapor by hygroscopic phases; and freezing and melting point depression of liquid water sustained by soluble minerals. Two series of experiments were performed in a differential scanning calorimeter (DSC) with homogenized powders of the following whole-rock meteorites and comparison samples: Allende (CV3), Murchison (CM2), Orgueil (CI), Holbrook (L6), and Pasamonte (eucrite) meteorites as well as on peridotite (PCC-1, USGS), saponite (Sap-Ca-1, CMS), montmorillonite (STx-1, CMS), and serpentine (Franciscan Formation, California). Results are briefly discussed.

Allton, Judith H.↗

Lunar base siting

As with any planetary body, the lunar surface is quite heterogeneous. There are widely dispersed sites of particular interest for known and potential resource availability, selenology, and lunar observatories. Discriminating characteristics include solar illumination, view of earth, local topography, engineering properties of the regolith and certain geological features, and local mineralogy and petrology. Space vehicle arrival and departure trajectories constitute a minor consideration. Over time, a variety of base sites will be developed serving different purposes. Resource-driven sites may see the fastest growth during the first decades of lunar development, but selection of the most favorable sites is likely to be driven by suitability for a combination of activities. As on earth, later development may be driven by geographical advantages of surface transportation routes. With the availability of near-constant sunlight for power generation, as well as permanently shadowed areas at cryogenic temperatures, polar sites are attractive because they require substantially less earth-launched mass and lower equipment complexity for an initial permanent base. Discovery of accessible volatiles reservoirs, either in the form of polar permafrost or gas reservoirs at other locations, would dramatically increase the attractiveness of any site from a logistical support and selenological point of view. Amid such speculation, no reliable evidence of such volatiles exist. More reliable evidence exists for areas of certain mineral concentrations, such as ilmenite, which could form a feedstock for some proposed resource extraction schemes. While tentative selections of advantageous base sites are made, new data from lunar polar orbiters and the Galileo polar flybys would be very helpful.

Staehle, Robert L.↗

Galileo: The Earth encounter

The following subject areas are covered: Galileo Veega trajectory to Jupiter; lunar science objectives; Earth science objectives; Santa 2 data flow; Galileo - the U.S./Canada connections and European connections; UV spectrometer observations during close encounter periods; phase angle and cone angle of the Earth during the Earth encounters; Lunar orbit traverse at EGA1; Moon imaging - EGA1; Galileo imaging Earth after EGA1; and Earth 1 flyby geometry.

Clarke, Theodore C.↗

Lick Saturn-Voyager reference star catalogue (Klemola, Taraji, and Ocampo 1979): Documentation for the machine-readable version

The machine readable version of the catalog, as it is currently being distributed from the Astronomical Data Center, is described. The catalog contains accurate equatorial coordinates for 4551 stars in a band of sky against which cameras of the Voyager spacecraft were pointed for observations in the region of Saturn during the flyby. All of the reference stars are in the range 12(exp h) 40(exp m) to 14(exp h) 12(exp m) in right ascension (1950) and +02 to -09 degs in declination. Mean errors of the positions are about 0.25 sec.

Warren, Wayne H., Jr.↗

Lick Jupiter-Voyager reference star catalogue (Klemola, Morabito, and Taraji 1978): Documentation for the machine-readable version

The machine-readable version of the catalog, as it is currently being distributed from the Astronomical Data Center, is described. The catalog contains accurate equatorial coordinates for 4983 stars in a band of sky against which cameras of the Voyager spacecraft were pointed for observations in the region of Jupiter during the flyby. All of the reference stars are in the range 6 hr 00 min to 8 hr 04 min in right ascension (1950), declination zones +16 to +23 degrees, and 8 hr to 31 min to 8 hr 57 min, zones +08 to +14 degrees. Mean errors of the positions are about 0.4 sec.

Warren, Wayne H., Jr.↗