Search NASA⌕ Search

SEARCH · Search NASA

Results for “INTEREST GROUPS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68
All sourcesNASA NTRSDOE OSTI
NASA NTRS2008

MISSE Results Used for RF Plasma Ground Testing-To-Space-Exposure Correlation for Coated Kapton

The ability to predict the durability of materials in the low Earth orbit (LEO) environment by exposing them in ground-based facilities is important because one can achieve test results sooner, expose more types of materials, and do it much more cost effectively than to test them in flight. However, flight experiments to determine the durability of groups or classes of materials that behave similarly are needed in order to provide correlations of how much time in ground-based facilities represents certain durations in LEO for the material type of interest. An experiment was designed and flown on the Materials International Space Station Experiment (MISSE) 2 (3.95 yr in LEO) and MISSE 4 (1.04 yr in LEO) in order to develop this type of correlation between ground-based RF plasma exposure and LEO exposure for coated Kapton. The experiment consisted of a sample of Kapton H (DuPont) polyimide coated with 1300 of silicon dioxide by Sheldahl, Inc. The samples were exposed to atomic oxygen in a radio frequency (RF) generated atomic oxygen plasma. Mass change was measured for the samples and then the same samples were exposed in flight on MISSE and the mass change was again recorded post-flight. After documentation, the samples were exposed again in the ground-based RF plasma in order to determine if the erosion would be the same as it had been in the same facility pre-flight which would indicate whether or not the sample had been damaged during flight and if the defects on the surface were those that were there preflight. The slopes of the mass change versus fluence plots were then used to develop a correlation factor that can be used to help predict the durability of coated Kapton in ground-based isotropic atomic oxygen plasma systems. This paper describes the experiment and presents the correlation factor results.

Miller, Sharon K. R.↗
DOE OSTI2013

Potential of hybrid functionalized meso-porous materials for the separation and immobilization of radionuclides

Functionalized meso-porous materials are a class of hybrid organic-inorganic material in which a meso-porous metal oxide framework is functionalized with multifunctional organic molecules. These molecules may contain one or more anchor groups that form strong bonds to the pore surfaces of the metal oxide framework and free functional groups that can impart and or modify the functionality of the material such as for binding metal ions in solution. Such materials have been extensively studied over the past decade and are of particular interest in absorption applications because of the tremendous versatility in choosing the composition and architecture of the metal oxide framework and the nature of the functional organic molecule as well as the efficient mass transfer that can occur through a well-designed hierarchically porous network. A sorbent for nuclear applications would have to be highly selective for particular radio nuclides, it would need to be hydrolytically and radiolytically stable, and it would have to possess reasonable capacity and fast kinetics. The sorbent would also have to be available in a form suitable for use in a column. Finally, it would also be desirable if once saturated with radio nuclides, the sorbent could be recycled or converted directly into a ceramic or glass waste form suitable for direct repository disposal or even converted directly into a material that could be used as a transmutation target. Such a cradle-to- grave strategy could have many benefits in so far as process efficiency and the generation of secondary wastes are concerned.This paper will provide an overview of work done on all of the above mentioned aspects of the development of functionalized meso-porous adsorbent materials for the selective separation of lanthanides and actinides and discuss the prospects for future implementation of a cradle-to-grave strategy with such materials. (author)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2015

The experiment filtering tool in the MACSENS workbench - 14341

The MACSENS (outils Moret d'Aide a la Caracterisation et aux etudes de SENSibilite) workbench is dedicated to the advanced validation work for criticality studies. The aim of this kind of tool is to determine the experiments from a validation database being the 'closest' to an application case and, from there, to evaluate a calculation bias with a related uncertainty. To achieve this goal, the MACSENS workbench relies on different kind of information stored in various databases depending on the origin of the data. Two main kinds of data can be identified. The first one concerns the data used to describe the experiments of the validation database (e.g. the inputs needed to perform a calculation). These values characterize the chemical and geometrical models. They can be considered as constant, as they do not vary once evaluated, and some of them can be from a non-numerical nature (reflector material for example...). The second kind of data gathers the results obtained with the use of a simulation code, such as reaction rates, fluxes and leakages, sensitivities, k{sub eff}, etc. These values depend on the version of the code and are purely numerical. In the early 2000's, regarding the increasing number of experiments evaluated in the ICSBEP handbook, the OECD/NEA (Organization for Economic Co-operation and Development/Nuclear Energy Agency), under the ICSBEP (International Criticality Safety Benchmark Evaluation Project) working group direction, decided to store such information in a database and to provide a software, called DICE (Database for the International Criticality safety benchmark Evaluation project), allowing users to search easily criticality experiments of interest. Up to now, more than 4400 critical or subcritical configurations have been compiled by ICSBEP, described and stored in the DICE database. Over time, a validation work has been done on the data, with the participation of IRSN, and a quality assurance policy has been defined. For these reasons, the DICE database is highly reliable. These features were fundamental for the MACSENS developers, who were looking for a database containing descriptive data of the experiments included in the MORET code validation database. The paper describes the solution chosen by IRSN to take advantage of the DICE database content and to overcome the DICE limits. It also explains the quality assurance policy applied to guaranty the reliability of the stored data. It will also discuss the use of the experiment-filtering module of the MACSENS workbench to select a set of experiments and to examine numerical parameter trends for an application case. (authors)

42 ENGINEERING↗
DOE OSTI2024

ANS-8 Nuclear Criticality Safety Consensus Standards - Current Initiatives

The nuclear criticality safety (NCS) consensus standards are developed as using rigorous procedures of the Standards Board of the American Nuclear Society. These procedures have been accredited by the American National Standards Institute, Inc., as meeting the criteria for American National Standards. The Nuclear Criticality Safety Consensus Committee (NCSCC) that approved all 18 NCS consensus standards is balanced to ensure that competent, concerned, and varied interests have had an opportunity to participate. The ANS-8 subcommittee (ANS-8) consists of 17 NCS experts with many years of experience as end users of ANS standards who serve on standard working groups to develop and maintain standards. ANS-8 ensures that the technical content of the standards is adequate for NCS community use. Attempts are made to ensure that ANS-8 consists of NCS professionals with a diverse range of experience such that all standards are applicable to as many sites as possible. ANS-8 is a very active subcommittee, and some active projects in progress are discussed in this paper: basis statement development for all standards, development of a glossary for consistency of definitions across all ANS-8 standards, and Considering the Criticality Safety Support Group (CSSG) Recommendation 2016-04 to the ANS Standards Board for changes in several ANS-8 standards.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗
DOE OSTI2017

Status Report on Activities of the Systems Assessment Task Force, OECD-NEA Expert Group on Accident Tolerant Fuels for LWRs

The Organization for Economic Cooperation and Development /Nuclear Energy Agency (OECD/NEA) Nuclear Science Committee approved the formation of an Expert Group on Accident Tolerant Fuel (ATF) for LWRs (EGATFL) in 2014. Chaired by Kemal Pasamehmetoglu, INL Associate Laboratory Director for Nuclear Science and Technology, the mandate for the EGATFL defines work under three task forces: (1) Systems Assessment, (2) Cladding and Core Materials, and (3) Fuel Concepts. Scope for the Systems Assessment task force (TF1) includes definition of evaluation metrics for ATF, technology readiness level definition, definition of illustrative scenarios for ATF evaluation, and identification of fuel performance and system codes applicable to ATF evaluation. The identification of irradiation facilities around the world that are being used, or are planned to be used, for the irradiation testing of ATF cladding and fuel materials was later added to the TF1 scope (April 2017). The Cladding and Core Materials (TF2) and Fuel Concepts (TF3) task forces have worked to identify gaps and needs for modeling and experimental demonstration; define key properties of interest; identify the data necessary to perform concept evaluation under normal conditions and illustrative scenarios; identify available infrastructure (internationally) to support experimental needs; and make recommendations on priorities. Where possible, considering proprietary and other export restrictions (e.g., International Traffic in Arms Regulations), the Expert Group has facilitated the sharing of data and lessons learned across the international group membership. The Systems Assessment task force is chaired by Shannon Bragg-Sitton (Idaho National Laboratory [INL], U.S.), the Cladding Task Force is chaired by Marie Moatti (Electricite de France [EdF], France), and the Fuels Task Force is chaired by a Masaki Kurata (Japan Atomic Energy Agency [JAEA], Japan). The original Expert Group mandate was established for June 2014 to June 2016. In April 2016 the Expert Group voted to extend the mandate one additional year to June 2017 in order to complete the task force deliverables; this request was subsequently approved by the Nuclear Science Committee. All reports are currently in final draft and will be submitted to NEA for final formatting/editing in October 2017. A final EGATFL meeting will be held at NEA Headquarters in Paris, France on November 2-3, 2017 to resolve any final comments on the task force reports. This report provides brief summary of the Systems Assessment Task Force deliverable report.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2014

CuLi{sub 2}Sn and Cu{sub 2}LiSn: Characterization by single crystal XRD and structural discussion towards new anode materials for Li-ion batteries

The stannides CuLi{sub 2}Sn (CSD-427095) and Cu{sub 2}LiSn (CSD-427096) were synthesized by induction melting of the pure elements and annealing at 400 °C. The phases were reinvestigated by X-ray powder and single-crystal X-ray diffractometry. Within both crystal structures the ordered CuSn and Cu{sub 2}Sn lattices form channels which host Cu and Li atoms at partly mixed occupied positions exhibiting extensive vacancies. For CuLi{sub 2}Sn, the space group F-43m. was verified (structure type CuHg{sub 2}Ti; a=6.295(2) Å; wR{sub 2}(F²)=0.0355 for 78 unique reflections). The 4(c) and 4(d) positions are occupied by Cu atoms and Cu+Li atoms, respectively. For Cu{sub 2}LiSn, the space group P6{sub 3}/mmc was confirmed (structure type InPt{sub 2}Gd; a=4.3022(15) Å, c=7.618(3) Å; wR{sub 2}(F²)=0.060 for 199 unique reflections). The Cu and Li atoms exhibit extensive disorder; they are distributed over the partly occupied positions 2(a), 2(b) and 4(e). Both phases seem to be interesting in terms of application of Cu–Sn alloys as anode materials for Li-ion batteries. - Highlights: • First single crystal investigation of CuLi{sub 2}Sn and Cu{sub 2}LiSn clarifies contradictions from literature. • Lithium atoms are ordered in channels, which is interesting for application as anode materials for lithium ion batteries. • Structural relationships to binary Cu–Sn-phases are shown. • Close structural relationship between both ternary phases exists.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Hydrothermal Synthesis and Characterization of Novel Brackebuschite-Type Transition Metal Vanadates: Ba 2 M(VO 4 ) 2 (OH), M = V 3+ , Mn 3+ , and Fe 3+ , with Interesting Jahn–Teller and Spin-Liquid Behavior

In a new series of transition metal vanadates, namely, Ba 2 M(VO 4 ) 2 (OH) (M = V 3+ , Mn 3+ , and Fe 3+ ), was synthesized as large single crystals hydrothermally in 5 M NaOH solution at 580 °C and 1 kbar. This new series of compounds is structurally reminiscent of the brackebuschite mineral type. The structure of Ba 2 V(VO 4 ) 2 (OH) is monoclinic in space group P2 1 /m, a = 7.8783(2) Å, b = 6.1369(1) Å, c = 9.1836(2) Å, β = 113.07(3)°, V = 408.51(2) Å 3 . Moreover, the other structures are similar and consist of one-dimensional trans edge-shared distorted octahedral chains running along the b-axis. The vanadate groups bridge across edges of their tetrahedra. Structural analysis of the Ba 2 Mn(VO 4 ) 2 (OH) analogue yielded a new understanding of the Jahn–Teller effect in this structure type. Raman and infrared spectra were investigated to observe the fundamental vanadate and hydroxide vibrational modes. Finally, single-crystal temperature-dependent magnetic studies on Ba 2 V(VO 4 ) 2 (OH) reveal a broad feature over a wide temperature range with maximum at ~100 K indicating that an energy gap could exist between the antiferromagnetic singlet ground state and excited triplet states, making it potentially of interest for quantum magnetism studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2016

Magnesium and Titanium Isotopic Compositions of an Unusual Hibonite-Perovskite Refractory Inclusion from Allende: It Is Fun

Introduction: Hibonite-rich refractory inclusions are among the first solids that formed in the solar nebula, and thus provide constraints on the earliest environment in the Solar System. An unusual hibonite-perovskite inclusion from Allende, SHAL, consists of a large (approximately 500 by 200 microns) single hibonite crystal and coexisting blocky perovskite (approximately 200 microns in size). The hibonite is characterized by chemical and oxygen isotopic compositions similar to those in the FUN (Fractionated and Unknown Nuclear anomalies) inclusion HAL. However, the rare earth element (REE) patterns measured at different spots of SHAL hibonite are highly variable, ranging from Group II-like (light REEs enriched relative to heavy REEs) to Group III-like (relatively flat with slight Eu depletions), but overall contrast largely with that of HAL, especially in the Ce and Yb abundances. This implies that SHAL hibonite formed and underwent distillation processes under more reducing conditions. Interestingly, the accompanying perovskite has uniform, unfractionated oxygen isotopic compositions (averaging delta (sup 17) O equals delta (sup 18) O equals −7 per mille) and REE abundances that are completely different from those of SHAL hibonite. This has been interpreted that perovskite and hibonite may not be co-genetic. Here we performed Al-Mg and Ti isotopic measurements of SHAL hibonite and perovskite to determine if the FUN characteristics are observed in these two isotope systems, and to further constrain the origin and evolution of SHAL. Results: Isotopic measurements of Al-Mg and Ti in SHAL were performed on the UCLA CAMECA ims-1290 ion microprobe by following the analytical protocols described in [1]. The Al-Mg and Ti data obtained in both terrestrial standards and SHAL hibonite and perovskite are shown below. Both SHAL hibonite and perovskite, despite very high (sup 27) Al to (sup 24) Mg ratios, are devoid of (sup 26) Mg excesses that can be attributed to the decay of (sup 26) Al. Delta (sup 25) Mg (mass-dependent fractionation) in hibonite is approximately −5 per mille per atomic mass unit relative to Madagascar hibonite, but is not well constrained for perovskite due to very large uncertainties owing to extremely low Mg contents. Similar to Mg isotopes, SHAL hibonite and perovskite show essentially the same Ti isotopic compositions, with anomalies in (sup 50) Ti of approximately 14 per mille, but the former shows greater Ti isotope fractionation than the latter (2.5 per mille per atomic mass unit versus 0 per mille). Discussion and Conclusions: The Al-Mg and Ti isotopic compositions of SHAL hibonite are consistent with those of HAL, suggesting that SHAL hibonite is a FUN inclusion and likely formed prior to homogenization of (sup 26) Al and Ti isotope variations in the solar nebula. However, the formation mechanisms for SHAL and HAL differ, given the differences in the REE patterns and degrees of oxygen mass-dependent fractionation. The Group-II to Group-III like REE patterns, the Yb depletions, and negative delta (sup 25) Mg observed in SHAL hibonite are all consistent with condensation of the hibonite precursor in a reducing environment.. The lack of large Ce depletions in SHAL hibonite implies that distillation processes that fractionated hibonite's oxygen isotopes must have taken place under a reducing condition, but the extent to which SHAL hibonite was distilled appears to be less than HAL because of the smaller degree of oxygen mass-dependent fractionation. The perovskite shares essentially the same Ti and Mg isotopic compositions as hibonite and probably formed in the same reservoir.. The ultrarefractory REE pattern seen in perovskite likely resulted from gas-solid fractionation which depleted HREEs in this reservoir. This process also explains why SHAL hibonite is generally depleted in HREEs relative to LREEs.

Liu, M.-C.↗
DOE OSTI2025

A review of radiation-induced damage to quantum dots

Quantum dots (QDs) are versatile nano structures that have applications in many fields of research and production, including biosensor technology, computing, photovoltaics, and optoelectronics. QDs have gained interest in the field of radiation detection because of their relative ease of production, tunable photoluminescence, and sensitivity to ionizing radiation. The photoluminescent properties of QDs diminish proportionally to prolonged ionizing radiation interactions, leading many groups to seek out these materials as potential candidates for the next generation of inexpensive, easily manufactured dosimetry and sensors. To use QDs in these applications, the mechanisms of radiation damage to the nanomaterial must be clearly understood and characterized. Herein, we review the study of ionizing radiation damage to QDs. First, the synthesis and properties of QDs are briefly discussed. Next, the radiation damage to QDs due to heavy charged particles, fast electrons, high energy photons, and neutrons are detailed. After this, experimental methods and modelling of QDs in radiation environments are examined. Lastly, future research directions are provided. The goal of this review is to aid in understanding the ionizing radiation effects on QD-based devices.

Snow, Jesse [University of Utah, Salt Lake City, U↗
DOE OSTI2023

Origins of heat transport anisotropy in MoTe2 and other bulk van der Waals materials

Knowledge of how heat flows anisotropically in van der Waals (vdW) materials is crucial for thermal management of emerging 2D materials devices and design of novel anisotropic thermoelectric materials. Despite the importance, anisotropic heat transport in vdW materials is yet to be systematically studied and is often presumably attributed to anisotropic speeds of sound in vdW materials due to soft interlayer bonding relative to covalent in-plane networks of atoms. In this work, we investigate the origins of the anisotropic heat transport in vdW materials, through time-domain thermoreflectance (TDTR) measurements and first-principles calculations of anisotropic thermal conductivity of three different phases of MoTe 2 . MoTe 2 is ideal for the study due to its weak anisotropy in the speeds of sound. We find that even when the speeds of sound are roughly isotropic, the measured thermal conductivity of MoTe 2 along the c-axis is 5–8 times lower than that along the in-plane axes. We derive meaningful characteristic heat capacity, phonon group velocity, and relaxation times from our first principles calculations for selected vdW materials (MoTe 2 , BP, h-BN, and MoS 2 ), to assess the contributions of these factors to the anisotropic heat transport. Interestingly, we find that the main contributor to the heat transport anisotropy in vdW materials is anisotropy in heat capacity of the dominant heat-carrying phonon modes in different directions, which originates from anisotropic optical phonon dispersion and disparity in the frequency of heat-carrying phonons in different directions. Further, the discrepancy in frequency of the heat-carrying phonons also leads to ~2 times larger average relaxation times in the cross-plane direction, and partially explains the apparent dependence of the anisotropic heat transport on the anisotropic speeds of sound. This work provides insight into understanding of the anisotropic heat transport in vdW materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Cobalt(II) Phthalocyanine Substituents Tune the Electrocatalytic CO 2 Conversion to Methanol

Cobalt phthalocyanine (Co(II)Pc) and its derivatives are promising molecular electrocatalysts for the electrochemical reduction of CO 2 to CO and methanol (CH 3 OH). Despite increasing interest, a detailed mechanistic understanding of how ligand substituents influence catalytic activity, selectivity, and efficiency remains limited. In this study, we employ density functional theory (DFT) to systematically investigate the influence of electron-donating groups (EDGs) and electron-withdrawing groups (EWGs) on the electronic structure and redox properties of the Co(II)Pc electrocatalyst, and to elucidate CO 2 RR mechanistic pathways. Our results reveal that EWGs cause a positive shift in the reduction potentials, favor CO 2 binding over protonation of the Co metal center and promote downstream methanol formation at mild potentials. EDGs show opposite trends including favorable protonation steps, promoting a negative shift in the reduction potential, and facilitating the hydrogen evolution reaction (HER), which competes with the desired CO 2 RR pathway. Notably, CO dissociation is thermodynamically and kinetically unfavorable across all systems, positioning the redox potential versus CO dissociation energy as a key factor for methanol selectivity. Furthermore, these insights provide a predictive framework for rational catalyst design and underscore the critical role of electronic tuning in advancing molecular electrocatalysts for sustainable CO 2 conversion.

Alcohols↗
DOE OSTI2023

Charge order induced Dirac pockets in the nonsymmorphic crystal TaTe 4

The interplay between charge order (CO) and nontrivial band topology has spurred tremendous interest in understanding topological excitations beyond the single-particle description. In a quasi-one-dimensional nonsymmorphic crystal TaTe 4 , the (2a×2b×3c) charge ordered ground state drives the system into a space group where the symmetry indicator features the emergence of Dirac fermions and unconventional double Dirac fermions. In this study, using angle-resolved photoemission spectroscopy and first-principles calculations, we provide evidence of the CO induced Dirac fermion-related bands near the Fermi level. Furthermore, the band folding at the Fermi level is compatible with the new periodicity dictated by the CO, indicating that the electrons near the Fermi level follow the crystalline symmetries needed to host double Dirac fermions in this system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2017

Inflection-point B - L Higgs inflation

Inflection-point inflation is an interesting possibility to realize a successful slow-roll inflation when inflation is driven by a single scalar field with its initial value below the Planck mass (ΦI≲M Pl ). In order for a renormalization group (RG) improved effective λΦ 4 potential to develop an inflection-point, the quartic coupling λ(Φ) must exhibit a minimum with an almost vanishing value in its RG evolution, namely λ( ΦI )≃0 and β λ (ΦI)≃0, where β λ is the beta-function of the quartic coupling. As an example, we consider the minimal gauged B-L extended Standard Model at the TeV scale, where we identify the B-L Higgs field as the inflaton field. For a successful inflection-point inflation, which is consistent with the current cosmological observations, the mass ratios among the Z' gauge boson, the right-handed neutrinos and the B-L Higgs boson are fixed. Our scenario can be tested in the future collider experiments such as the High-Luminosity LHC and the SHiP experiments. Finally, in addition, the inflection-point inflation provides a unique prediction for the running of the spectral index α≃-2.7×10 -3 ($60\atop{N}$) 2 (N is the e-folding number), which can be tested in the near future.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1960

The Lunar Environment

The NASA lunar exploration program has focused the attention of many scientific and technical groups on such questions as the relative value of lunar experiments, the advantages of manned versus unmanned exploration, and the proper time sequence for the steps to be taken in the exploration program. It is interesting to note that all the approaches to the problem require a definition of the lunar environment at an early stage in the program. The choice of scientific experiments and the design of the required instrumentation is based on our present knowledge of the Moon and on educated guesses as to what data may be obtained. The technical developments required to make possible both a lunar landing and continued operation of scientific equipment on the lunar surface also demand a definition of the lunar environment as a design condition.

Buwalda, Phyllis↗
NASA NTRS1992

High speed transition prediction

The main objective of this work period was to develop, acquire and apply state-of-the-art tools for the prediction of transition at high speeds at NASA Ames. Although various stability codes as well as basic state codes were acquired, the development of a new Parabolized Stability Equation (PSE) code was minimal. The time that was initially allocated for development was used on other tasks, in particular for the Leading Edge Suction problem, in acquiring proficiency in various graphics tools, and in applying these tools to evaluate various Navier-Stokes and Euler solutions. The second objective of this work period was to attend the Transition and Turbulence Workshop at NASA Langley in July and August, 1991. A report on the Workshop follows. From July 8, 1991 to August 2, 1991, the author participated in the Transition and Turbulence Workshop at NASA Langley. For purposes of interest here, analysis can be said to consist of solving simplified governing equations by various analytical methods, such as asymptotic methods, or by use of very meager computer resources. From the composition of the various groups at the Workshop, it can be seen that analytical methods are generally more popular in Great Britain than they are in the U.S., possibly due to historical factors and the lack of computer resources. Experimenters at the Workshop were mostly concerned with subsonic flows, and a number of demonstrations were provided, among which were a hot-wire experiment to probe the boundary layer on a rotating disc, a hot-wire rake to map a free shear layer behind a cylinder, and the use of heating strips on a flat plate to control instability waves and consequent transition. A highpoint of the demonstrations was the opportunity to observe the rather noisy 'quiet' supersonic pilot tunnel in operation.

Gasperas, Gediminis↗
NASA NTRS1994

Aerobic fitness and orthostatic tolerance: Evidence against an association

This presentation will focus on only one side of the debate as to whether high levels of aerobic fitness have a deleterious effect on tolerance to gravitational stress. This issue was raised in the early 1970's as a result of two research publications. The first work investigated the carotid sinus baroreflex of humans with an airtight chamber that surrounded the head and neck. The steady-state reflex changes in blood pressure that were recorded 3 minutes after application of the head and neck stimuli, were attenuated in an athletic group compared to a sedentary group of volunteers. A second report in the NASA literature indicated that five endurance-trained runners were less tolerant to LBNP than five nonrunners. These early research findings have stimulated a considerable amount of interest that has lead to a growing number of research efforts seeking an association between aerobic fitness and orthostatic tolerance in humans. I will briefly review some of the more pertinent published research information which suggests that there is no relationship between aerobic fitness and orthostatic tolerance in humans.

Ebert, Thomas J.↗
NASA NTRS2015

Center Planning and Development Student Engineer at KSC

This summer I was the Student Trainee (Engineering) Pathways Intern (co-op) at the Kennedy Space Center (KSC) in the Center Planning & Development (CPD) Directorate. CPD works with commercial companies who are interested in using KSC's unique capabilities for spaceflight, spacecraft processing, ground systems and Research & Development (R&D) projects that fall in line with NASA's Mission and Vision. CPD is divided into three (3) groups: (1) AD-A, which works on the Master Planning for the center, (2) AD-B (where I am), which works on project control, management and integration, and (3) AD-C, which works on partnership development. CPD's main goal is to make KSC the world's preeminent multi-user spaceport and maintain the center as a leader in space exploration. CPD is a very diverse group of employees having a wide knowledge of not only the Space Shuttle, but also Expendable Launch Vehicles (ELV). The director of CPD, Scott Colloredo, is on the advisory board for Commercial Space Operations (CSO) and has a degree from ERAU. I worked on a number of different tasks for AD-B, as well as CPD, that includes, but not limited to: reviewing and reissuing engineering documents, weekly notes for CPD and senior management, engineering familiarizations with facilities at KSC, leading a tour for the Embry-Riddle Aeronautical University Career Services office, and working on actual agreements/proposals that will be used in the partnership process with multiple partners, along with other projects. Most of the work I have done is sensitive information and cannot be disclosed.

Engineer↗
NASA NTRS2025

Habitability and Human Factors Assessment (iSHORT, SHAQ, and SHU)

BACKGROUND As long-duration off-planet habitats become a reality, a consideration of habitability and human factors (HF) is crucial. The habitat is more than just a place to live and work. It is also the crew’s perception of the space, and the psychological impacts of size, layout, and usage over time; all of which can support or strain behavioral health and performance (BHP). A previous International Space Station (ISS) habitability study used the iSHORT (Space Habitability Observation Reporting Tool) to collect detailed data about habitability and human factors and inform NASA Standards. Of the previous iSHORT study, only one of the six ISS subjects had a duration of one year; all other ISS and ground analog subjects had shorter mission durations from one week to six months. It is necessary to collect new data with a focus on long-duration exploration missions of > 6 months and on planetary surface habitat design. New data is also needed to compare the iSHORT to other habitability measures. One measure, the SHAQ (Subjective Habitability and Acceptability Questionnaire), assesses the intersection of psychology and habitability. Another complementary measure, the Scale for Habitat Usability (SHU), is a brief subjective scale that captures how habitat design impacts perceived usability of the built environment in relation to task performance. OBJECTIVE Our study aims to (1) understand how individual well-being and team dynamics may relate to HF concerns over time, (2) capture how habitability and HF change over time, (3) compare the three habitability measures (iSHORT, SHAQ, SHU), (4) assess habitats to capture HF design concerns and related BHP impacts of a planetary habitat, and (5) inform future standards for HF design. METHOD Data are being collected on crews living and working in long-duration spaceflight analogs. Individual-level data collections are repeated at regular intervals throughout the missions on several habitat areas, activities, and key equipment (i.e., points of interest). These points of interest (POIs) include the kitchen/galley, crew quarters, and other work and living areas. Assessments include evaluations of privacy, comfort, convenience, control, efficiency, and social density through the lens of subsequent outcomes like sleep, individual performance, group activities performance, stress, mood, and social interactions. Pre- and post-mission evaluations will also allow comparison with homes, pre- and post-mission hotels, and a retrospective reflection of living and working in a long-duration analog. INITIAL DATA COLLECTIONS In this poster, we will describe the measures and data yield. Since the research protocol was designed, the study team has collected iSHORT Standalone four times, nine collections of SHAQ, and three collections of iSHORT with SHAQ. Data collection is ongoing. SUMMARY A novel assessment suite has been developed to further aid the comparison and complementary understanding of the habitability and human factors measures, which will allow for efficient deployment of these measures in analogs and/or spaceflight in near-term research as well as support well-being and performance through design.

J C W Miller↗