Search NASA⌕ Search

SEARCH · Search NASA

Results for “Importance Sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Mechanically and optically controlled graphene valley filter

We theoretically investigate the valley-dependent electronic transport through a graphene monolayer modulated simultaneously by a uniform uniaxial strain and linearly polarized light. Within the Floquet formalism, we calculate the transmission probabilities and conductances of the two valleys. It is found that valley polarization can appear only if the two modulations coexist. Under a proper stretching of the sample, the ratio of the light intensity and the light frequency squared is important. If this quantity is small, the electron transport is mainly contributed by the valley-symmetric central band and the conductance is valley unpolarized; but when this quantity is large, the valley-asymmetric sidebands also take part in the transport and the valley polarization of the conductance appears. Furthermore, the degree of the polarization can be tuned by the strain strength, light intensity, and light frequency. It is proposed that the detection of the valley polarization can be realized utilizing the valley beam splitting. Thus, a graphene monolayer can be used as a mechanically and optically controlled valley filter.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Unbiased reduced density matrices and electronic properties from full configuration interaction quantum Monte Carlo

Properties that are necessarily formulated within pure (symmetric) expectation values are difficult to calculate for projector quantum Monte Carlo approaches, but are critical in order to compute many of the important observable properties of electronic systems. Here, we investigate an approach for the sampling of unbiased reduced density matrices within the full configuration interaction quantum Monte Carlo dynamic, which requires only small computational overheads. This is achieved via an independent replica population of walkers in the dynamic, sampled alongside the original population. The resulting reduced density matrices are free from systematic error (beyond those present via constraints on the dynamic itself) and can be used to compute a variety of expectation values and properties, with rapid convergence to an exact limit. A quasi-variational energy estimate derived from these density matrices is proposed as an accurate alternative to the projected estimator for multiconfigurational wavefunctions, while its variational property could potentially lend itself to accurate extrapolation approaches in larger systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Simulation of adiabatic quantum computing for molecular ground states

Quantum computation promises to provide substantial speedups in many practical applications with a particularly exciting one being the simulation of quantum many-body systems. Adiabatic state preparation (ASP) is one way that quantum computers could recreate and simulate the ground state of a physical system. In this paper, we explore a novel approach for classically simulating the time dynamics of ASP with high accuracy and with only modest computational resources via an adaptive sampling configuration interaction scheme for truncating the Hilbert space to only the most important determinants. We verify that this truncation introduces negligible error and use this new approach to simulate ASP for sets of small molecular systems and Hubbard models. Furthermore, we examine two approaches to speeding up ASP when performed on quantum hardware: (i) using the complete active space configuration interaction (CASCI) wave function instead of the Hartree–Fock initial state and (ii) a nonlinear interpolation between the initial and target Hamiltonians. We find that starting with a CASCI wave function with a limited active space yields substantial speedups for many of the systems examined, while nonlinear interpolation does not. In additional, we observe interesting trends in the minimum gap location (based on the initial state) as well as how state preparation time can depend on certain molecular properties, such as the number of valence electrons. Importantly, we find that the required state preparation times do not show an immediate exponential wall that would preclude an efficient run of ASP on actual hardware.

Kremenetski, Vladimir↗

The role of magnetic anisotropy in the magnetoresistance of Cr 2 O 3 /Al 2 O 3 thin film antiferromagnets

The magnetic states of antiferromagnetic insulating thin films are a promising medium for information storage, but characterization of these states has proven to be challenging. One approach is via magnetotransport measurements in an adjacent heavy metal layer. To this end, we synthesized and characterized a series of Cr 2 O 3 films and bilayers on Al 2 O 3 substrates with three different orientations: m-plane, a-plane, and c-plane. X-ray diffraction results demonstrated orientation control of the Cr 2 O 3 thin film, with m-plane films displaying a higher degree of mosaic spread than the a- and c-plane films. Reciprocal space maps showed that the films are mostly relaxed, although there was a small and different degree of strain in each orientation. The m-plane films were under 2% compressive strain, the a-plane film was under 0.5% compressive strain, and the c-plane film was completely relaxed to bulk values. To probe the magnetic state of the films, we measured the angular dependent magnetoresistance of Cr 2 O 3 /Pt bilayers for each orientation. We found a nontrivial temperature dependence of the sign of the magnetoresistance, pointing to the complex interplay between the exchange and anisotropy energies that vary with orientation. We propose that strain and mosaic spread may contribute to a difference in magnetic anisotropies among the samples and the resulting temperature dependence of the magnetoresistance. This work demonstrates the importance of considering the competition between antiferromagnetic exchange and magnetic anisotropy when storing information in the spin state of an antiferromagnetic insulator.

42 ENGINEERING↗

MULTI-ELEMENT ABUNDANCE MEASUREMENTS FROM MEDIUM-RESOLUTION SPECTRA. III. METALLICITY DISTRIBUTIONS OF MILKY WAY DWARF SATELLITE GALAXIES

We present metallicity distribution functions (MDFs) for the central regions of eight dwarf satellite galaxies of the Milky Way: Fornax, Leo I and II, Sculptor, Sextans, Draco, Canes Venatici I, and Ursa Minor. We use the published catalog of abundance measurements from the previous paper in this series. The measurements are based on spectral synthesis of iron absorption lines. For each MDF, we determine maximum likelihood fits for Leaky Box, Pre-Enriched, and Extra Gas (wherein the gas supply available for star formation increases before it decreases to zero) analytic models of chemical evolution. Although the models are too simplistic to describe any MDF in detail, a Leaky Box starting from zero metallicity gas fits none of the galaxies except Canes Venatici I well. The MDFs of some galaxies, particularly the more luminous ones, strongly prefer the Extra Gas Model to the other models. Only for Canes Venatici I does the Pre-Enriched Model fit significantly better than the Extra Gas Model. The best-fit effective yields of the less luminous half of our galaxy sample do not exceed 0.02 Z{sub sun}, indicating that gas outflow is important in the chemical evolution of the less luminous galaxies. We surmise that the ratio of the importance of gas infall to gas outflow increases with galaxy luminosity. Strong correlations of average [Fe/H] and metallicity spread with luminosity support this hypothesis.

79 ASTRONOMY AND ASTROPHYSICS↗

A BAYESIAN MONTE CARLO ANALYSIS OF THE M-{sigma} RELATION

We present an analysis of selection biases in the M{sub bh}-{sigma} relation using Monte Carlo simulations including the sphere of influence resolution selection bias and a selection bias in the velocity dispersion distribution. We find that the sphere of influence selection bias has a significant effect on the measured slope of the M{sub bh}-{sigma} relation, modeled as {beta}{sub intrinsic} = -4.69 + 2.22{beta}{sub measured}, where the measured slope is shallower than the model slope in the parameter range of {beta} > 4, with larger corrections for steeper model slopes. Therefore, when the sphere of influence is used as a criterion to exclude unreliable measurements, it also introduces a selection bias that needs to be modeled to restore the intrinsic slope of the relation. We find that the selection effect due to the velocity dispersion distribution of the sample, which might not follow the overall distribution of the population, is not important for slopes of {beta} {approx} 4-6 of a logarithmically linear M{sub bh}-{sigma} relation, which could impact some studies that measure low (e.g., {beta} < 4) slopes. Combining the selection biases in velocity dispersions and the sphere of influence cut, we find that the uncertainty of the slope is larger than the value without modeling these effects and estimate an intrinsic slope of {beta} = 5.28{sup +0.84}{sub -0.55}.

79 ASTRONOMY AND ASTROPHYSICS↗

SYSTEMATIC EFFECTS IN POLARIZING FOURIER TRANSFORM SPECTROMETERS FOR COSMIC MICROWAVE BACKGROUND OBSERVATIONS

The detection of the primordial B-mode polarization signal of the cosmic microwave background (CMB) would provide evidence for inflation. Yet as has become increasingly clear, the detection of a such a faint signal requires an instrument with both wide frequency coverage to reject foregrounds and excellent control over instrumental systematic effects. Using a polarizing Fourier transform spectrometer (FTS) for CMB observations meets both of these requirements. In this work, we present an analysis of instrumental systematic effects in polarizing FTSs, using the Primordial Inflation Explorer (PIXIE) as a worked example. We analytically solve for the most important systematic effects inherent to the FTS—emissive optical components, misaligned optical components, sampling and phase errors, and spin synchronous effects—and demonstrate that residual systematic error terms after corrections will all be at the sub-nK level, well below the predicted 100 nK B-mode signal.

79 ASTRONOMY AND ASTROPHYSICS↗

Unveiling the Nature of Polar-ring Galaxies from Deep Imaging

Abstract General structural properties and low surface brightness tidal features hold important clues to the formation of galaxies. In this paper, we study a sample of polar-ring galaxies (PRGs) based on optical imaging from the Sloan Digital Sky Survey Stripe 82 and other deep surveys. We investigate the deepest images of candidates for PRGs to date. We carry out photometric decomposition on the host galaxies and associated polar structures that allows us to derive the structural properties of both components. We are able to detect very faint tidal structures around most PRGs in our sample. For several galaxies, we can directly observe the formation of the polar ring due to merging, which is manifested in debris of the victim galaxy and an arc-like polar structure made up of its material. In a few cases, we can discern signs of tidal accretion. The results obtained indicate that the gravitational interaction and merging of galaxies are the most plausible mechanisms for the formation of PRGs.

Astronomy & Astrophysics↗

Strong nebular emissions associated with Mg ii absorptions detected in the SDSS spectra of background quasars

ABSTRACT We present long-slit spectroscopic observations of 40 Galaxy On Top of Quasars (GOTOQs) at ${0.37 \leqslant z \leqslant 1.01}$ using the South African Large Telescope. Using this and available photometric data, we measure the impact parameters of the foreground galaxies to be in the range of 3–16 kpc with a median value of 8.6 kpc. This is the largest sample of galaxies producing Mg ii absorption at such low impact parameters. These quasar–galaxy pairs are ideal for probing the disc–halo interface. At such impact parameters, we do not find any anticorrelation between rest equivalent width (REW) of Ca ii, Mn ii, Fe ii, Mg ii, and Mg i absorption and impact parameter. These sight lines are typically redder than those of strong Mg ii absorbers, with the colour excess, E(B − V) for our sample ranging from −0.191 to 0.422, with a median value of 0.058. In the E(B − V) versus W3935 plane, GOTOQs occupy the same region as Ca ii absorbers. For a given E(B − V), we find larger W3935 than what has been found in the Milky Way, probably due to a smaller dust-to-gas ratio in GOTOQs. Galaxy parameters could be measured for twelve cases, and their properties seem to follow the trends found for strong Mg ii absorbers. Measuring the host galaxy properties for the full sample using HST photometry or AO-assisted ground-based imaging is important to gain insights into the relationship between the stellar mass of galaxies and the metal line REW distributions at low impact parameters.

Astronomy & Astrophysics↗

Time- and momentum-resolved tunneling spectroscopy of pump-driven nonthermal excitations in Mott insulators

We present a computational technique to calculate time- and momentum-resolved nonequilibrium spectral density of correlated systems using a tunneling approach akin to scanning tunneling spectroscopy. The important difference is that our probe is extended, basically a copy of the sample, allowing one to extract the momentum information of the excitations. We illustrate the method by measuring the spectrum of a Mott-insulating extended Hubbard chain after a sudden quench with the aid of time-dependent density-matrix renormalization-group calculations. In this work, we demonstrate that the system realizes a nonthermal state that is an admixture of spin and charge density wave states, with corresponding signatures that are recognizable as in-gap subbands. In particular, we identify a band of excitons and one of stable antibound states at high energies that gains enhanced visibility after the pump. We do not appreciate noticeable relaxation within the time scales considered, which is attributed to the lack of decay channels due to spin-charge separation. These ideas can be readily applied to study transient dynamics and spectral signatures of correlation-driven nonequilibrium processes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Light Flux Density Threshold at Which Protein Denaturation is Induced by Synchrotron Radiation Circula Dichroism Beamlines

New high-flux synchrotron radiation circular dichroism (SRCD) beamlines are providing important information for structural biology, but can potentially cause denaturation of the protein samples under investigation. This effect has been studied at the new CD1 dedicated SRCD beamline at ISA in Denmark, where radiation-induced thermal damage effects were observed, depending not only on the radiation flux but also on the focal spot size of the light. Comparisons with similar studies at other SRCD facilities worldwide has lead to the estimation of a flux density threshold under which SRCD beamlines should be operated when samples are to be exposed to low-wavelength vacuum ultraviolet radiation for extended periods of time.

43 PARTICLE ACCELERATORS↗

High-density grids for efficient data collection from multiple crystals

Higher throughput methods to mount and collect data from multiple small and radiation-sensitive crystals are important to support challenging structural investigations using microfocus synchrotron beamlines. Furthermore, efficient sample-delivery methods are essential to carry out productive femtosecond crystallography experiments at X-ray free-electron laser (XFEL) sources such as the Linac Coherent Light Source (LCLS). To address these needs, a high-density sample grid useful as a scaffold for both crystal growth and diffraction data collection has been developed and utilized for efficient goniometer-based sample delivery at synchrotron and XFEL sources. A single grid contains 75 mounting ports and fits inside an SSRL cassette or uni-puck storage container. The use of grids with an SSRL cassette expands the cassette capacity up to 7200 samples. Grids may also be covered with a polymer film or sleeve for efficient room-temperature data collection from multiple samples. New automated routines have been incorporated into the Blu-Ice / DCSS experimental control system to support grids, including semi-automated grid alignment, fully automated positioning of grid ports, rastering and automated data collection. Specialized tools have been developed to support crystallization experiments on grids, including a universal adaptor, which allows grids to be filled by commercial liquid-handling robots, as well as incubation chambers, which support vapor-diffusion and lipidic cubic phase crystallization experiments. Experiments in which crystals were loaded into grids or grown on grids using liquid-handling robots and incubation chambers are described. As a result, crystals were screened at LCLS-XPP and SSRL BL12-2 at room temperature and cryogenic temperatures.

59 BASIC BIOLOGICAL SCIENCES↗

Super-resolution reconstruction for 4D computed tomography of the lung via the projections onto convex sets approach

Purpose: The use of 4D computed tomography (4D-CT) of the lung is important in lung cancer radiotherapy for tumor localization and treatment planning. Sometimes, dense sampling is not acquired along the superior–inferior direction. This disadvantage results in an interslice thickness that is much greater than in-plane voxel resolutions. Isotropic resolution is necessary for multiplanar display, but the commonly used interpolation operation blurs images. This paper presents a super-resolution (SR) reconstruction method to enhance 4D-CT resolution. Methods: The authors assume that the low-resolution images of different phases at the same position can be regarded as input “frames” to reconstruct high-resolution images. The SR technique is used to recover high-resolution images. Specifically, the Demons deformable registration algorithm is used to estimate the motion field between different “frames.” Then, the projection onto convex sets approach is implemented to reconstruct high-resolution lung images. Results: The performance of the SR algorithm is evaluated using both simulated and real datasets. Their method can generate clearer lung images and enhance image structure compared with cubic spline interpolation and back projection (BP) method. Quantitative analysis shows that the proposed algorithm decreases the root mean square error by 40.8% relative to cubic spline interpolation and 10.2% versus BP. Conclusions: A new algorithm has been developed to improve the resolution of 4D-CT. The algorithm outperforms the cubic spline interpolation and BP approaches by producing images with markedly improved structural clarity and greatly reduced artifacts.

60 APPLIED LIFE SCIENCES↗

Features of the electric-field distribution in anisotropic semiconductor wafers in a transverse magnetic field

A macroscopic model of the Hall effects and magnetoresistance in anisotropic semiconductor wafers is developed. The results obtained by solving the electrodynamic boundary problem allow the potential and eddy currents in anisotropic semiconductors to be calculated at different current-contact locations, depending on the parameters of the sample material's anisotropy. The results of this study are of great practical importance for investigating the physical properties of anisotropic semiconductors and simulating the electron-transport phenomena in devices based on anisotropic semiconductors.

36 MATERIALS SCIENCE↗

Local polynomial chaos expansion for linear differential equations with high dimensional random inputs

In this paper we present a localized polynomial chaos expansion for partial differential equations (PDE) with random inputs. In particular, we focus on time independent linear stochastic problems with high dimensional random inputs, where the traditional polynomial chaos methods, and most of the existing methods, incur prohibitively high simulation cost. Furthermore, the local polynomial chaos method employs a domain decomposition technique to approximate the stochastic solution locally. In each subdomain, a subdomain problem is solved independently and, more importantly, in a much lower dimensional random space. In a postprocesing stage, accurate samples of the original stochastic problems are obtained from the samples of the local solutions by enforcing the correct stochastic structure of the random inputs and the coupling conditions at the interfaces of the subdomains. Overall, the method is able to solve stochastic PDEs in very large dimensions by solving a collection of low dimensional local problems and can be highly efficient. In our paper we present the general mathematical framework of the methodology and use numerical examples to demonstrate the properties of the method.

97 MATHEMATICS AND COMPUTING↗

Host genotype controls ecological change in the leaf fungal microbiome

Leaf fungal microbiomes can be fundamental drivers of host plant success, as they contain pathogens that devastate crop plants and taxa that enhance nutrient uptake, discourage herbivory, and antagonize pathogens. We measured leaf fungal diversity with amplicon sequencing across an entire growing season in a diversity panel of switchgrass ( Panicum virgatum ). We also sampled a replicated subset of genotypes across 3 additional sites to compare the importance of time, space, ecology, and genetics. We found a strong successional pattern in the microbiome shaped both by host genetics and environmental factors. Further, we used genome-wide association (GWA) mapping and RNA sequencing to show that 3 cysteine-rich receptor-like kinases (crRLKs) were linked to a genetic locus associated with microbiome structure. We confirmed GWAS results in an independent set of genotypes for both the internal transcribed spacer (ITS) and large subunit (LSU) ribosomal DNA markers. Fungal pathogens were central to microbial covariance networks, and genotypes susceptible to pathogens differed in their expression of the 3 crRLKs, suggesting that host immune genes are a principal means of controlling the entire leaf microbiome.

59 BASIC BIOLOGICAL SCIENCES↗

Metagenomic Sequencing of an In Vitro -Simulated Microbial Community

Microbial life dominates the earth, but many species are difficult or even impossible to study under laboratory conditions. Sequencing DNA directly from the environment, a technique commonly referred to as metagenomics, is an important tool for cataloging microbial life. This culture-independent approach involves collecting samples that include microbes in them, extracting DNA from the samples, and sequencing the DNA. A sample may contain many different microorganisms, macroorganisms, and even free-floating environmental DNA. A fundamental challenge in metagenomics has been estimating the abundance of organisms in a sample based on the frequency with which the organism’s DNA was observed in reads generated via DNA sequencing. We created mixtures of ten microbial species for which genome sequences are known. Each mixture contained an equal number of cells of each species. We then extracted DNA from the mixtures, sequenced the DNA, and measured the frequency with which genomic regions from each organism was observed in the sequenced DNA. We found that the observed frequency of reads mapping to each organism did not reflect the equal numbers of cells that were known to be included in each mixture. The relative organism abundances varied significantly depending on the DNA extraction and sequencing protocol utilized. We describe a new data resource for measuring the accuracy of metagenomic binning methods, created by in vitro-simulation of a metagenomic community. Our in vitro simulation can be used to complement previous in silico benchmark studies. In constructing a synthetic community and sequencing its metagenome, we encountered several sources of observation bias that likely affect most metagenomic experiments to date and present challenges for comparative metagenomic studies. DNA preparation methods have a particularly profound effect in our study, implying that samples prepared with different protocols are not suitable for comparative metagenomics.

59 BASIC BIOLOGICAL SCIENCES↗

Pb+ irradiation of synthetic zircon (ZrSiO4): Infrared spectroscopic investigation - Reply

We appreciate the opportunity to respond to the comment by Nasdala (2009) concerning our interpretation of infrared spectra used to investigate the change in the structure of Pb-irradiated zircon as a function of increasing fluence (Zhang et al. 2008a, 2008b). Nasdala is correct in cautioning experimentalists to carefully match the analytical technique to the expected irradiation damage profile in order to optimally probe the irradiation effects, and in fact, this point was emphasize by Ewing et al. (2003) in a review of radiation effects in zircon. However, Nasdala’s discussion fails to fully appreciate three important points: i) There is a difference between in situ irradiations of TEM samples that must be electron transparent, ~200 nm thick, as were completed by Weber et al. (1994), and more bulk-like irradiations that were completed in the Zhang et al. (2008a and 2008b) studies; ii) The particle-solid interactions change along the path of an implanted ion, that is the distribution and nature of the damage changes with depth as the ion loses energy, resulting in the greatest number of ballistic interactions near the end of the particle trajectory (see Figure 1 of Ewing et al. 2003); iii) In comparing natural zircon damaged by alpha-decay events with ion irradiated zircon, one must be aware that the recoil nucleus and the alpha particle cause different types of damage, and the use of the Pb-implantation experiment is meant to simulate only the alpha-recoil damage.

36 MATERIALS SCIENCE↗