Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLATES, FLAT - STRESSES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Aerodynamic heating to corrugation stiffened structures in thick turbulent boundary layers

The results of an experimental program to evaluate heat transfer and pressure distributions on corrugation roughened flat plates in thick turbulent boundary layers are presented. The experimental program consisted of tests in the tunnel wall boundary layers of the Langley Unitary Plan Wind Tunnel (UPWT) and Continuous Flow Hypersonic Tunnel (CFHT) at freestream Mach numbers of 2.5, 3.5, 4.5, and 10.3. Tests in the UPWT were conducted at a freestream Reynolds number/m of 10,800,000 and in the CFHT, at Reynolds numbers/m of 1,300,000 to 5,800,000. The test configurations consisted of 50.8 x 50.8 cm panels with corrugated beads of two different peak amplitudes, 0.61 and 0.29 cm. The angle of the corrugated beads relative to the flow direction was varied between 0 (aligned) and 90 deg (normal). The measured peak and average heat transfer are analyzed and correlated in terms of the bulk boundary layer, internal boundary layer, and geometric parameters.-

Brandon, H. J.↗

Experimental evaluation of trailing edge and incidence fluctuation noise theories

Tests were conducted to evaluate conflicting theories for trailing edge noise and for incidence fluctuation noise. A flat-plate airfoil with flush-mounted surface pressure transducers was tested in an anechoic wind tunnel at velocities from 31.5 to 177 m/sec and nominal 4 and 6% grid-generated turbulence levels. In one series of runs, the airfoil was faired into the tunnel nozzle and extended beyond the nozzle lip for studies of trailing edge noise without a leading edge and with flow on only one side. Such noise was found to vary with velocity to the fifth power and turbulence level squared as predicted by Ffowcs Williams and Hall (1970) and by Chase (1972). Power spectral density at high frequencies decayed approximately inversely with frequency to the 10/3 power as predicted by Chase. The data were poorly predicted by Hayden's correlation (1969, 1972).

Fink, M. R.↗

Trailing edge noise

Shadowgraphic observations of the flow structure of a wall jet downstream of the trailing edge of a flat plate were carried out. Shadowgraphs obtained at jet exit Mach number 0.3 to 0.8 consistently showed an orderly large oscillatory flow structure. It is believed that these large scale disturbances are the result of flow instabilities. It is also believed that these orderly disturbances are responsible for generating the dominant part of trailing edge noise either directly or indirectly. The interaction of sound generated by these coherent oscillatory flow disturbances and the plate was investigated theoretically. It is found that the farfield noise directivity is strongly influenced by diffraction of sound at the leading edge of the plate.

Tam, C. K. W.↗

Numerical calculation of finite amplitude effects in unstable laminar boundary layers

A numerical study of one stage of the transition region from laminar to turbulent flow of the boundary layer over a flat plate is performed. Benney-Lin theory is applied to the laminar profile, which is closer to that of the experiment, i.e., the Blasius profile. Several laminar profiles are studied, all belonging to the Falkner-Skan family. The flow is found to depend principally upon the disturbance spanwise wavenumber, beta, whose variation results, in some instances, in a system of counter-rotating vortices, one on top of the other, for the mean secondary flow.

Antar, B. N.↗

Unified nonlinear approach to both weak and strong-interaction problems

The numerical results are obtained for heat transfer, skin-friction, and viscous interaction induced pressure for a step-wise accelerated flat plate in hypersonic flow. In the unified approach here the results are presented for both weak and strong-interaction problems without employing any linearization scheme. With the help of the numerical method used in this work an accurate prediction of wall shear can be made for the problems with plate velocity changes of 1% or larger. The obtained results indicate that the transient contribution to the induced pressure for helium is greater than that for air.

Gupta, R. N.↗

Experiments on supersonic boundary-layer separation in three dimensions

A detailed experimental study of three-dimensional separation in supersonic flow is described. Three-dimensional wedges affixed to flat plates were used to generate the flow fields that were used to examine the relationship of cross flow to the extent of separation. Models with strong transverse pressure gradients resulted in a diminished extent of separation about the model plane of symmetry but demonstrated expansive growth of separation to a limit with distance from the plane of symmetry. A secondary flow region was found embedded in the separated flow.

Bachalo, W. D.↗

The International Heat Pipe Experiment

On October 4, 1974 the International Heat Pipe Experiment was launched aboard a Black Brant Sounding Rocket from White Sands, New Mexico. The flight provided six minutes of near zero gravity during which a total of ten separate heat pipe experiments were performed. The fifteen heat pipes which were tested represent some of the latest American and European technology. This flight provided the first reported zero gravity data on cryogenic and flat plate vapor chamber heat pipes. Additionally, valuable design and engineering data was obtained on several other heat pipe configurations. This paper will discuss the payload and four of the individual experiments.

Mcintosh, R.↗

Use of numerically generated body-fitted coordinate systems for solution of the Navier-Stokes equations

A procedure for numerical solution of the time-dependent, two-dimensional incompressible Navier-Stokes equations that can treat the unsteady laminar flow about bodies of arbitrary shape, such as two-dimensional airfoils, multiple airfoils, and submerged hydrofoils, as naturally as it can deal with the flow about simple bodies. The solution is based on a method of automatic numerical generation of a general curvilinear coordinate system with coordinate lines coincident with all boundaries of a general multiconnected region containing any number of arbitrarily shaped bodies. The curvilinear coordinates are generated as the solution of two elliptical partial differential equations with Dirichlet boundary conditions, one coordinate being specified to be constant on each of the boundaries, and a distribution of the other being specified along the boundaries. The solution compares excellently with the Blasius boundary layer solution for the flow past a semiinfinite flat plate.

Thompson, J. F.↗

Solar heated and cooled office building

Installation at NASA Langley Research Center, Hampton, Virginia, serves as full-scale working test-bed facility to test flat-plate solar-energy collector systems.

Maag, W. L.↗

A numerical method for the prediction of high-speed boundary-layer transition using linear theory

A method is described of estimating the location of transition in an arbitrary laminar boundary layer on the basis of linear stability theory. After an examination of experimental evidence for the relation between linear stability theory and transition, a discussion is given of the three essential elements of a transition calculation: (1) the interaction of the external disturbances with the boundary layer; (2) the growth of the disturbances in the boundary layer; and (3) a transition criterion. The computer program which carried out these three calculations is described. The program is first tested by calculating the effect of free-stream turbulence on the transition of the Blasius boundary layer, and is then applied to the problem of transition in a supersonic wind tunnel. The effects of unit Reynolds number and Mach number on the transition of an insulated flat-plate boundary layer are calculated on the basis of experimental data on the intensity and spectrum of free-stream disturbances. Reasonable agreement with experiment is obtained in the Mach number range from 2 to 4.5.

Mack, L. M.↗

Asymptotic theory of two-dimensional trailing-edge flows

Problems of laminar and turbulent viscous interaction near trailing edges of streamlined bodies are considered. Asymptotic expansions of the Navier-Stokes equations in the limit of large Reynolds numbers are used to describe the local solution near the trailing edge of cusped or nearly cusped airfoils at small angles of attack in compressible flow. A complicated inverse iterative procedure, involving finite-difference solutions of the triple-deck equations coupled with asymptotic solutions of the boundary values, is used to accurately solve the viscous interaction problem. Results are given for the correction to the boundary-layer solution for drag of a finite flat plate at zero angle of attack and for the viscous correction to the lift of an airfoil at incidence. A rational asymptotic theory is developed for treating turbulent interactions near trailing edges and is shown to lead to a multilayer structure of turbulent boundary layers. The flow over most of the boundary layer is described by a Lighthill model of inviscid rotational flow. The main features of the model are discussed and a sample solution for the skin friction is obtained and compared with the data of Schubauer and Klebanoff for a turbulent flow in a moderately large adverse pressure gradient.

Melnik, R. E.↗

Effect of slot width on transition and noise attenuation of a flat sound shield in a Mach 6 wind tunnel

An experimental and theoretical study of a sound shield concept to attenuate the noise radiated into the test section from the turbulent boundary layer on the walls of wind tunnels was conducted. The model investigated was planar with a sharp flat plate leading edge faired into an array of rods aligned nearly parallel to the local flow. For a ratio of gap diameter to rod diameter of 0.16, the flow was laminar over the entire model at a maximum local length Reynolds number of 14 million. A 45% reduction in the tunnel free stream root mean square pressure level was measured within the shielded region for this gap width when the boundary layers on the rods were laminar. Smaller ratios of gap diameter to rod diameter resulted in substantial reductions in the transition Reynolds number, and in a 40% pressure reduction.

Stainback, P. C.↗

Size distribution of fragment debris produced by simulated meteoroid impact of spacecraft wall

A laboratory experimental program was conducted to determine the amount of fragment debris produced and its size distribution when simulated spacecraft walls are penetrated by hypervelocity projectiles. Two tests were made in which a spacecraft wall was struck with a small steel and an aluminum projectile, respectively. Results show that most of the fragment debris were irregularly shaped flat plates. The fragment data follow a cumulative number distribution law of the form N = am(exp b) where m is fragment mass and a and b are constants. Orbital lifetimes of most of the fragments were very short, being on the order of a few days.

T Dale Bess↗

Photovoltaic applications of Compound Parabolic Concentrator (CPC)

The use of a compound parabolic concentrator as field collector, in conjunction with a primary focusing concentrator for photovoltaic applications is studied. The primary focusing concentrator can be a parabolic reflector, an array of Fresnel mirrors, a Fresnel lens or some other lens. Silicon solar cell grid structures are proposed that increase efficiency with concentration up to 10 suns. A ray tracing program has been developed to determine energy distribution at the exit of a compound parabolic concentrator. Projected total cost of a CPC/solar cell system will be between 4 and 5 times lower than for flat plate silicon cell arrays.

Winston, R.↗

A preliminary study of the effects of vortex diffusers (winglets) on wing flutter

Some experimental flutter results are presented for a simple, flat-plate wing model and for the same wing model equipped with two different upper surface vortex diffusers over the Mach number range from about 0.70 to 0.95. Both vortex diffusers had the same planform, but one weighed about 0.3 percent of the basic wing weight, whereas the other weighed about 1.8 percent of the wing weight. The addition of the lighter vortex diffuser reduced the flutter dynamic pressure by about 3 percent; the heavier vortex diffuser reduced the flutter dynamic pressure by about 12 percent. The experimental flutter results are compared at a Mach number of 0.80 with analytical flutter results obtained by using doublet lattice and lifting surface (Kernel function) unsteady aerodynamic theories.

Doggett, R. V., Jr.↗

Nonreactive mixing study of a scramjet swept-strut fuel injector

The results are presented of a cold-mixing investigation performed to supply combustor design information and to determine optimum normal fuel-injector configurations for a general scramjet swept-strut fuel injector. The experimental investigation was made with two swept struts in a closed duct at a Mach number of 4.4 and a nominal ratio of jet mass flow to air mass flow of 0.0295, with helium used to simulate hydrogen fuel. Four injector patterns were evaluated; they represented the range of hole spacing and the ratio of jet dynamic pressure to free-stream dynamic pressure. Helium concentration, pitot pressure, and static pressure in the downstream mixing region were measured to generate the contour plots needed to define the mixing-region flow field and the mixing parameters. Experimental results show that the fuel penetration from the struts was less than the predicted values based on flat-plate data; but the mixing rate was faster and produced a mixing length less than one-half that predicted.

Mcclinton, C. R.↗

Experimental aerodynamic characteristics for slender bodies with thin wings at angles of attack from 0 deg to 58 deg and Mach numbers from 0.6 to 2.0

An experimental investigation was conducted in the Ames 6-by-6-Foot Wind Tunnel to measure the static aerodynamic characteristics for bodies of circular and elliptic cross section with various thin flat-plate wings. Eighteen configuration combinations were tested at Mach numbers of 0.6, 0.9, 1.2, 1.5, and 2.0 at angles of attack from 0 deg to 58 deg. The data demonstrate that taper ratio and aspect ratio had only small effect on the aerodynamic characteristics, especially at the higher angles of attack. Undesirable side forces and yawing moments, which developed at angles of attack greater than about 25 deg, were generally no greater than those for the bodies tested alone. As for the bodies alone, the side forces and yawing moments increased as the nose fineness ratio increased and/or as the subsonic Mach number decreased.

Jorgensen, L. H.↗