Search NASA⌕ Search

SEARCH · Search NASA

Results for “Phase 2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Phase 1 Space Fission Propulsion Energy Source Design

Fission technology can enable rapid, affordable access to any point in the solar system. If fission propulsion systems are to be developed to their full potential; however, near-term customers must be identified and initial fission systems successfully developed, launched, and operated. Studies conducted in fiscal year 2001 (IISTP, 2001) show that fission electric propulsion (FEP) systems with a specific mass at or below 50 kg/kWjet could enhance or enable numerous robotic outer solar system missions of interest. At the required specific mass, it is possible to develop safe, affordable systems that meet mission requirements. To help select the system design to pursue, eight evaluation criteria were identified: system integration, safety, reliability, testability, specific mass, cost, schedule, and programmatic risk. A top-level comparison of four potential concepts was performed: a Testable, Passive, Redundant Reactor (TPRR), a Testable Multi-Cell In-Core Thermionic Reactor (TMCT), a Direct Gas Cooled Reactor (DGCR), and a Pumped Liquid Metal Reactor.(PLMR). Development of any of the four systems appears feasible. However, for power levels up to at least 500 kWt (enabling electric power levels of 125-175 kWe, given 25-35% power conversion efficiency) the TPRR has advantages related to several criteria and is competitive with respect to all. Hardware-based research and development has further increased confidence in the TPRR approach. Successful development and utilization of a "Phase I" fission electric propulsion system will enable advanced Phase 2 and Phase 3 systems capable of providing rapid, affordable access to any point in the solar system.

Houts, Mike↗

NASA/ARMY/BELL XV-15 Tiltrotor Low Noise Terminal Area Operations Flight Research Program

A series of three XV-15 acoustic flight tests have been conducted over a five year period by a NASA/Army/Bell Helicopter team to evaluate the noise reduction potential for tiltrotor aircraft during terminal area operations. Lower hemispherical noise characteristics for a wide range of steady-state terminal area type operating conditions were measured during the phase 1 test and indicated that the takeoff and level flight conditions were not significant contributors to the total noise of tiltrotor operations. Phase 1 results were used to design low noise approach profiles that were tested during the phase 2 and phase 3 tests, which used large area microphone arrays to directly measure the ground noise footprints. Approach profile designs emphasized noise reduction while maintaining handling qualities sufficient for tiltrotor commercial passenger ride comfort and flight safety under Instrument Flight Rules (IFR) conditions. This paper will discuss the weather, aircraft, tracking, guidance, and acoustic instrumentation systems, as well as the approach profile design philosophy, and the overall test program philosophy. Acoustic results are presented documenting the variation in tiltrotor noise due to changes in operating condition, indicating the potential for significant noise reduction using the unique tiltrotor capability of nacelle tilt.

Conner, David A.↗

Technology for Entry Probes

A viewgraph describing technologies for entry probes is presented. The topics include: 1) Entry Phase; 2) Descent Phase; 3) Long duration atmospheric observations; 4) Survivability at high temperatures; and 5) Summary.

Cutts, James A.↗

A Preliminary Investigation into the Mitigation of Plug-in Hybrid Electric Vehicle Tailpipe Emissions Through Supervisory Control Methods Part 1: Analytical Development of Energy Management Strategies

Plug-in hybrid electric vehicle (PHEV) technologies have the potential for considerable petroleum consumption reductions, possibly at the expense of increased tailpipe emissions due to multiple 'cold' start events and improper use of the engine for PHEV specific operation. PHEVs operate predominantly as electric vehicles (EVs) with intermittent assist from the engine during high power demands. As a consequence, the engine can be subjected to multiple cold start events. These cold start events may have a significant impact on the tailpipe emissions due to degraded catalyst performance and starting the engine under less than ideal conditions. On current hybrid electric vehicles (HEVs), the first cold start of the engine dictates whether or not the vehicle will pass federal emissions tests. PHEV operation compounds this problem due to infrequent, multiple engine cold starts. The research is broken down into two (2) distinct phases, involving both analytical and experimental areas. Phase I of the research, addressed in this document, focuses on the design of a vehicle supervisory control system for a pre-transmission parallel PHEV powertrain architecture. A suitable control system architecture is created and implemented into a standard vehicle modeling tool (in this case, the Powertrain Systems Analysis Toolkit). Energy management strategies are evaluated and implemented in a virtual environment for preliminary assessment of petroleum displacement benefits and rudimentary drivability issues. Engine cold start events are aggressively addressed in the development of this control system, which leads to enhanced pre-warming and energy-based engine warming algorithms that provide substantial reductions in tailpipe emissions over the baseline supervisory control strategy. The flexibility of the PHEV powertrain offers the potential for decreased emissions during any engine starting event through powertrain 'torque shaping' algorithms. The analytical work presented here is experimentally validated during Phase 2, the subject of a follow on paper.

02 PETROLEUM↗

Magnetic properties of Fe{sub 2}P-type Tb{sub 6}FeTe{sub 2}, Tb{sub 6}CoTe{sub 2}, Tb{sub 6}NiTe{sub 2} and Er{sub 6}FeTe{sub 2} compounds

The magnetic ordering of the Fe{sub 2}P-type Tb{sub 6}FeTe{sub 2}, Tb{sub 6}CoTe{sub 2} Tb{sub 6}NiTe{sub 2} and Er{sub 6}FeTe{sub 2} phases (space group P6-bar 2m) has been investigated through magnetization measurement and neutron powder diffraction. Tb{sub 6}FeTe{sub 2}, Tb{sub 6}CoTe{sub 2} and Tb{sub 6}NiTe{sub 2} demonstrate high-temperature ferromagnetic and low-temperature spin reorientation transitions, whereas Er{sub 6}FeTe{sub 2} shows antiferromagnetic transition, only. The Tb{sub 6}FeTe{sub 2} and Tb{sub 6}NiTe{sub 2} phases show same high-temperature collinear ferromagnetic structure, whereas Tb{sub 6}FeTe{sub 2} is the commensurate non-collinear ferromagnet and Tb{sub 6}NiTe{sub 2} is the canted ferromagnetic cone with K{sub 1}=[0, 0, {+-}3/10] and K{sub 2}=[{+-}2/9, {+-}2/9, 0] wave vectors at 2 K. The magnetic structure of Er{sub 6}FeTe{sub 2} is a flat spiral with K{sub 1}=[0, 0, {+-}1/10] at 2 K. The magnetic entropy change for Tb{sub 6}NiTe{sub 2} is {Delta}S{sub m}=-4.86 J/kg K at 229 K for the field change {Delta}{mu}{sub 0}H=0-5 T. In addition, novel Fe{sub 2}P-type Gd{sub 6}FeTe{sub 2}, Zr{sub 6}FeTe{sub 2}, Hf{sub 6}FeTe{sub 2}, Dy{sub 6}NiTe{sub 2}, Zr{sub 6}NiTe{sub 2} and Hf{sub 6}NiTe{sub 2} phases have been obtained. -- Graphical abstract: The novel Fe{sub 2}P-type Tb{sub 6{l_brace}}Fe, Co, Te{r_brace}Te{sub 2} and Er{sub 6}FeTe{sub 2} phases (space group P6-bar 2m) show the complex magnetic ordering below 18-228 K. The magnetocaloric effect for Tb{sub 6}NiTe{sub 2} in terms of the isothermal entropy change, -{Delta}S{sub m}, has the maximum value of 4.86 J/kg K at 229 K for the 0-5 T field change.

36 MATERIALS SCIENCE↗

Irradiation induced structural change in Mo 2 Zr intermetallic phase

The Mo 2 Zr phase has been identified as a major interaction product at the interface of U-10Mo and Zr. Transmission electron microscopy in-situ irradiation with Kr ions at 200 °C with doses up to 2.0E+16 ions/cm 2 was carried out to investigate the radiation stability of the Mo 2 Zr. The Mo 2 Zr undergoes a radiation-induced structural change, from a large cubic (cF24) to a small cubic (cI2), along with an estimated 11.2% volume contraction without changing its composition. The structural change begins at irradiation dose below 1.0E+14 ions/cm 2 . Furthermore, the transformed Mo 2 Zr phase demonstrates exceptional radiation tolerance with the development of dislocations without bubble formation.

36 MATERIALS SCIENCE↗

Effects of Divalent Cations on Phase Behavior and Structure of a Zwitterionic Phospholipid (DMPC) Mono layer at the Air-Water Interface

Effects of divalent cations (Ca{sup 2+}, Mg{sup 2+}, Ni{sup 2+}, and Zn{sup 2+}) on a zwitterionic phospholipid monolayer at the air-water interface are investigated by surface pressure-area isotherms and in situ X-ray scattering. Divalent cations lower the surface pressure for the fluid (LE) to condensed (L{sub 2}) phase transition in a strongly ion-specific manner. Surprisingly, the two-dimensional lattice dimensions and the tilt of the lipids alkyl tails in the L{sub 2} phase show a nearly ion-nonspecific dependence on the excess surface pressure above the transition pressure. An empirical 'universal' relationship was found between the tail tilt and the excess pressure, with the tails in the L{sub 2} phase always displaying a tilt of 29{sup o} at the transition. A practical implication of these results is that, regardless of the divalent cation present, the microscopic details of the lipid tail packing in the L{sub 2} phase can be deduced at any surface pressure once the transition pressure is obtained from isotherms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructure characterization and electrical transport of nanocrystalline ZrO{sub 2}–CeO{sub 2} solid solution

Graphical abstract: - Highlights: • Monoclinic ZrO{sub 2} phase has been changed to cubic ZrO{sub 2} phase within a short milling. • Conductivity increases due to change of phase from monoclinic to cubic. • A maximum has been observed in the s–T curve. • A transformation from −ve to +ve ac magnetoconductance has been observed. - Abstract: Nanocrystalline ZrO{sub 2}–CeO{sub 2} (ZC) solid solution is synthesized by high energy ball-milling the powder mixture of monoclinic (m) ZrO{sub 2}–10 mol% CeO{sub 2} in air medium. X-ray powder diffraction (XRD) patterns show that the method IS effective to synthesize cubic (c) ZrO{sub 2} phase within a short milling time. Formation mechanism, structural and microstructural changes of different phases and relative phase abundances have been estimated by Rietveld analysis of XRD patterns. The dc conductivity has been enhanced due to monoclinic to cubic phase transformation. A transformation from small polaron hopping to correlated barrier hoping has been observed from the of temperature dependence frequency exponent study. A crossover from negative to positive ac magnetoconductance has been observed at temperature T = 280 K and 230 K for unmilled (ZC0H) and 8 h (ZC8H) milled samples, respectively.

36 MATERIALS SCIENCE↗

Correction: CO 2 induced phase transitions in diamine-appended metal–organic frameworks

Correction for ‘CO 2 induced phase transitions in diamine-appended metal–organic frameworks’ by Bess Vlaisavljevich et al. , Chem. Sci. , 2015, 6 , 5177–5185. The authors regret that there are some discrepancies reproducing the data in the original article due to the determined coordinates not being the fully optimised geometries. The authors have provided more information.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Precursor Selection on the Photocatalytic Performance of Indium Oxide Nanomaterials for Gas-Phase CO 2 Reduction

Nonstoichiometric indium oxide nanoparticles, In 2 O 3–x (OH)y, have been shown to function as active photocatalysts for gas-phase CO 2 reduction under simulated solar irradiation. We demonstrate that the choice of starting material has a strong effect on the photocatalytic activity of indium oxide nanoparticles. We also examine three indium oxide materials prepared via the thermal decomposition of either indium(III) hydroxide or indium(III) nitrate and correlate their stability and photocatalytic activity to the number and type of defect present in the material. Furthermore, we use 13CO 2 isotope-tracing experiments to clearly identify the origins of the observed carbon-containing products. Significantly, we find that the oxidizing nature of the precursor anion has a substantial impact on the defect formation within the sample. Our study demonstrates the importance of surface defects in designing an active heterogeneous photocatalyst and provides valuable insight into key parameters for the precursor design, selection, and performance optimization of materials for gas-phase CO 2 reduction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Beneficial Effect of Iron in Aluminum-Cerium-Based Cast Alloys

Iron (Fe) has been considered a major impurity since it is detrimental to the mechanical properties of many cast aluminum alloys due to the formation of Fe-containing brittle intermetallic phases. Fe is found naturally as an impurity in bauxite ore, resulting in Fe contamination of aluminum alloys with increasing contamination from current recycling practices. The Al–Ce–Fe system was investigated using CALPHAD (CALculation of PHAse Diagrams) modeling and experimental casting techniques. It was found that additions of Fe to the Al–Ce system are beneficial to the strength (slightly) and ductility (significantly) of the ternary alloys, which is attributed to the formation of fine metastable Al 8 CeFe 2 phase with aggregate morphology and equilibrium Al 10 CeFe 2 phase, suppressing coarse proeutectic Al 11 Ce 3 phase in near-eutectic Al–Ce alloys. Heat treatment study showed that the metastable Al 8 CeFe 2 phase transforms to predicted equilibrium Al 10 CeFe 2 phase at 500 °C, with essentially no intermetallic or grain coarsening; thus, the alloy displayed excellent property retention. The Al–Ce–Fe alloy system offers opportunities for sustainable, recyclable alloy development using low-cost Fe and low-cost cerium (a byproduct of rare-earth extraction).

42 ENGINEERING↗

Triphasic 2D Materials by Vertically Stacking Laterally Heterostructured 2H-/1T'-MoS 2 on Graphene for Enhanced Photoresponse

Recently the applications of two-dimensional (2D) materials have been broadened by engineering their mechanical, electronic, and optical properties through either lateral or vertical hybridization. Along with this line, we report the successful design and fabrication of a novel triphasic 2D material by vertically stacking lateral 2H-/1T'-molybdenum disulfide (MoS 2 ) heterostructures on graphene with the assistance of supercritical carbon dioxide. This triphasic structure is experimentally shown to significantly enhance the photocurrent densities for hydrogen evolution reactions. First-principles theoretical analyses reveal that the improved photoresponse should be ascribed to the beneficial band alignments of the triphasic heterostructure. More specifically, electrons can efficiently hop to the 1T'-MoS 2 phase via the highly conductive graphene layer as a result of their strong vertical interfacial electronic coupling. Subsequently, the electrons acquired on the 1T'-MoS 2 phase are exploited to fill the photoholes on the photo-excited 2H-MoS 2 phase through the lateral heterojunction structure, thereby suppressing the recombination process of the photo-induced charge carriers on the 2H-MoS 2 phase. This novel triphasic concept promises to open a new avenue to widen the molecular design of 2D hybrid materials for photonics-based energy conversion applications.

36 MATERIALS SCIENCE↗

An Extratropical Pathway for the Madden–Julian Oscillation’s Influence on North Atlantic Tropical Cyclones

Abstract This study investigates the combined impacts of the Madden–Julian oscillation (MJO) and extratropical anticyclonic Rossby wave breaking (AWB) on subseasonal Atlantic tropical cyclone (TC) activity and their physical connections. Our results show that during MJO phases 2–3 (enhanced Indian Ocean convection) and 6–7 (enhanced tropical Pacific convection), there are significant changes in basinwide TC activity. The MJO and AWB collaborate to suppress basinwide TC activity during phases 6–7 but not during phases 2–3. During phases 6–7, when AWB occurs, various TC metrics including hurricanes, accumulated cyclone energy, and rapid intensification probability decrease by ∼50%–80%. Simultaneously, large-scale environmental variables, like vertical wind shear, precipitable water, and sea surface temperatures become extremely unfavorable for TC formation and intensification, compared to periods characterized by suppressed AWB activity during the same MJO phases. Further investigation reveals that AWB events during phases 6–7 occur in concert with the development of a stronger anticyclone in the lower troposphere, which transports more dry, stable extratropical air equatorward, and drives enhanced tropical SST cooling. As a result, individual AWB events in phases 6–7 can disturb the development of surrounding TCs to a greater extent than their phases 2–3 counterparts. The influence of the MJO on AWB over the western subtropical Atlantic can be attributed to the modulation of the convectively forced Rossby wave source over the tropical eastern Pacific. A significant number of Rossby waves initiating from this region during phases 5–6 propagate into the subtropical North Atlantic, preceding the occurrence of AWB events in phases 6–7.

54 ENVIRONMENTAL SCIENCES↗

Comparison of the electronic and thermoelectric properties of three layered phases Bi 2 Te 3 , PbBi 2 Te 4 and PbBi 4 Te 7 : LEGO thermoelectrics

The electronic and thermoelectric properties of Bi 2 Te 3 , PbBi 2 Te 4 and PbBi 4 Te 7 were examined on the basis of density functional theory (DFT) calculations and thermoelectric transport property measurements. The layered phase PbBi 4 Te 7 is composed of the slabs forming the layered phases Bi 2 Te 3 and PbBi 2 Te 4 . The electronic structure of PbBi 4 Te 7 around the valence band maximum and conduction band minimum exhibits those of Bi 2 Te 3 and PbBi 2 Te 4 . The band gap of PbBi 4 Te 7 lies in between those of Bi 2 Te 3 and PbBi 2 Te 4 , and the density of states of PbBi 4 Te 7 is well approximated by the sum of those of Bi2Te3 and PbBi 2 Te 4 . In terms of the carrier concentration, the carrier mobility, the carrier lifetime, the electrical conductivity normalized to the carrier lifetime, and the effective mass, the layered phases Bi 2 Te 3 , PbBi 2 Te 4 and PbBi 4 Te 7 form a group of thermoelectrics, which have the structures composed of several different slabs and whose thermoelectric properties are approximated by the average of those of the constituent slabs. We propose to use the term “LEGO thermoelectrics” to describe such a family of thermoelectric materials that operate in a desired temperature range and possess predictable thermoelectric properties.

36 MATERIALS SCIENCE↗

Electrostatic propulsion beam divergence effects on spacecraft surfaces, volume 2

The third phase of a program to develop understanding of and tolerance-level criteria for the deleterious effects of electrostatic rocket exhaust (Cs, Cs(+), Hg, Hg(+)) and materials of rocket construction impinging on typical classes of spacecraft (S/C) surfaces was completed. Models of ion engine effluents and models describing the degradation of S/C surfaces by these effluents are presented. Experimental data from previous phases are summarized and Phase 2 data and analysis are presented in detail. The spacecraft design implications of ion engine contaminants are discussed.

Hall, D. F.↗

Isothermal and cyclic oxidation behaviours of MoSi2 with additions of B at 1250 °C prepared by spark plasma sintering

Highlights: • A Mo-Si-B alloy is obtained when fine Mo-Si-B powder is sintered. • SPS Mo-Si-B alloy consists of fine MoSi{sub 2}, Mo{sub 2}B{sub 5}, MoB and SiO{sub 2} phases. • Increasing B content reduces incubation stage of oxide layer but increases mass gain. • SPS sample made from finer alloy powder has better oxidation resistance. • Spilling of SiO{sub 2} in SPS sample acts as a “Mechanical locking” on oxide layer. - Abstract: Mo-Si-B alloys were obtained by spark plasma sintering (SPS) using Mo-57Si-10B and Mo-52Si-15B alloy powders, and the effects of the B content and powder size on the isothermal and cyclic oxidation behaviours of the Mo-Si-B alloys at 1250 °C were investigated. A SiO{sub 2} phase was introduced during the SPS process and the Mo-Si-B alloys consisted of a fine MoSi{sub 2}/Mo{sub 2}B{sub 5}/MoB/SiO{sub 2} microstructure. Under isothermal and cyclic oxidation conditions, the kinetic curves of the SPS Mo-Si-B alloys exhibited parabolic time dependence on the weight gain. The increase in the nominal B caused a decrease in the incubation stage of the formation of continuously protective borosilicate layer but increased the mass gain due to the higher fluidity of the borosilicate layer. The SiO{sub 2} phase was found to supply the borosilicate layer with a “Mechanical locking” mechanism through the spilling of the SiO{sub 2} phase in the SPS samples, especially under the cyclic oxidation condition.

36 MATERIALS SCIENCE↗

Phased Development of Accident Tolerant Fue

The United States Department of Energy (U.S. DOE) Advanced Fuels Campaign (AFC) has adopted a three-phase approach for the development and eventual commercialization of enhanced, accident tolerant fuel (ATF) for light water reactors (LWRs). Extending from 2012 to 2016, AFC is currently coming to the end of Phase 1 research that has entailed Feasibility Assessment and Prioritization for a large number of proposed fuel systems (fuel and cladding) that could provide improved performance under accident conditions. Phase 1 activities will culminate with a prioritization of concepts for both near-term and long-term development based on the available experimental data and modeling predictions. This process will provide guidance to DOE on what concepts should be prioritized for investment in Phase 2 Development/Qualification activities based on technical performance improvements and probability of meeting the aggressive schedule to insert a lead fuel rod (LFR) in a commercial power reactor by 2022. While Phase 1 activities include small-scale fabrication work, materials characterization, and limited irradiation of samples, Phase 2 will require development teams to expand to industrial fabrication methods, conduct irradiation tests under more prototypic reactor conditions (i.e. in contact with reactor primary coolant at LWR conditions and in-pile transient testing), conduct additional characterization and post-irradiation examination, and develop a fuel performance code for the candidate ATF. Phase 2 will culminate in the insertion of an LFR (or lead fuel assembly) in a commercial power reactor. The Phase 3 Commercialization work will extend past 2022. Following post-irradiation examination of LFRs, partial-core reloads will be demonstrated. The commercialization phase will further entail the establishment of commercial fabrication capabilities and the transition of LWR cores to the new fuel. The three development phases described roughly correspond to the technology readiness levels (TRL) defined for nuclear fuel development. TRL 1–3 corresponds to the “proof-of-concept” stage (Phase 1), TRL 4–6 to “proof-of-principle” (Phase 2), and TRL 7–9 to “proof-of-performance” (Phase 3). This paper will provide an overview of the anticipated activities within each phase of development and will provide an update on the current ATF development status.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Phased development of accident tolerant fuel

The United States Department of Energy (U.S. DOE) Advanced Fuels Campaign (AFC) has adopted a three-phase approach for the development and eventual commercialization of enhanced, accident tolerant fuel (ATF) for light water reactors (LWRs). Extending from 2012 to 2016, AFC is currently coming to the end of Phase 1 research that has entailed Feasibility Assessment and Prioritization for a large number of proposed fuel systems (fuel and cladding) that could provide improved performance under accident conditions. Phase 1 activities will culminate with a prioritization of concepts for both near-term and long-term development based on the available experimental data and modeling predictions. This process will provide guidance to DOE on what concepts should be prioritized for investment in Phase 2 Development/Qualification activities based on technical performance improvements and probability of meeting the aggressive schedule to insert a lead fuel rod (LFR) in a commercial power reactor by 2022. While Phase 1 activities include small-scale fabrication work, materials characterization, and limited irradiation of samples, Phase 2 will require development teams to expand to industrial fabrication methods, conduct irradiation tests under more prototypic reactor conditions (i.e. in contact with reactor primary coolant at LWR conditions and in-pile transient testing), conduct additional characterization and post-irradiation examination, and develop a fuel performance code for the candidate ATF. Phase 2 will culminate in the insertion of an LFR (or lead fuel assembly) in a commercial power reactor. The Phase 3 Commercialization work will extend past 2022. Following post-irradiation examination of LFRs, partial-core reloads will be demonstrated. The commercialization phase will further entail the establishment of commercial fabrication capabilities and the transition of LWR cores to the new fuel. The three development phases described roughly correspond to the technology readiness levels (TRL) defined for nuclear fuel development. TRL 1-3 corresponds to the 'proof-of-concept' stage (Phase 1), TRL 4-6 to 'proof-of-principle' (Phase 2), and TRL 7-9 to 'proof-of-performance' (Phase 3). This paper will provide an overview of the anticipated activities within each phase of development and will provide an update on the current ATF development status. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗