Search NASA⌕ Search

SEARCH · Search NASA

Results for “SUPERFLUID MODEL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Mathematical model of the metal mould surface temperature optimization

The article is focused on the problem of generating a uniform temperature field on the inner surface of shell metal moulds. Such moulds are used e.g. in the automotive industry for artificial leather production. To produce artificial leather with uniform surface structure and colour shade the temperature on the inner surface of the mould has to be as homogeneous as possible. The heating of the mould is realized by infrared heaters located above the outer mould surface. The conceived mathematical model allows us to optimize the locations of infrared heaters over the mould, so that approximately uniform heat radiation intensity is generated. A version of differential evolution algorithm programmed in Matlab development environment was created by the authors for the optimization process. For temperate calculations software system ANSYS was used. A practical example of optimization of heaters locations and calculation of the temperature of the mould is included at the end of the article.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High temperature spin dynamics in linear magnetic chains, molecular rings, and segments by nuclear magnetic resonance

We present the room temperature proton nuclear magnetic resonance (NMR) nuclear spin-lattice relaxation rate (NSLR) results in two 1D spin chains: the Heisenberg antiferromagnetic (AFM) Eu(hfac){sub 3}NITEt and the magnetically frustrated Gd(hfac){sub 3}NITEt. The NSLR as a function of external magnetic field can be interpreted very well in terms of high temperature spin dynamics dominated by a long time persistence of the decay of the two-spin correlation function due to the conservation of the total spin value for isotropic Heisenberg chains. The high temperature spin dynamics are also investigated in Heisenberg AFM molecular rings. In both Cr{sub 8} closed ring and in Cr{sub 7}Cd and Cr{sub 8}Zn open rings, i.e., model systems for a finite spin segment, an enhancement of the low frequency spectral density is found consistent with spin diffusion but the high cut-off frequency due to intermolecular anisotropic interactions prevents a detailed analysis of the spin diffusion regime.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Alternative material study for heat assisted magnetic recording transducer application

In heat assisted magnetic recording (HAMR), optical near field transducer (NFT) is a key component. Au is currently used as NFT material because of its strong surface plasmon effect. Due to the soft property of Au material, reliability of Au NFT becomes a key issue for realizing HAMR production. In this paper, the possibility of alternative materials, including transition metal nitrides (TMNs) and transparent conducting oxides (TCOs) to replace Au is studied. The results show that all of the listed TMN and TCO materials can meet the mechanical requirements at room temperature in terms of hardness and thermal expansion. An optical model, which includes optical waveguide, NFT and FePt media, is used to simulate NFT performances. The results indicate that the resonant wavelengths for NFT with TCO materials are longer than 1500 nm, which is not suitable for HAMR application. TMN materials are suitable for NFT application at wavelength band of around 800 nm. But the NFT efficiency is very low. ZrN is the best material among TMN materials and the efficiency of ZrN NFT is only 13% of the Au NFT's efficiency. Reducing refractive index (n) and increasing extinction coefficient (k) will both lead to efficiency increase. Increasing k contributes more in the efficiency increase, while reducing n has a relatively low NFT absorption. For materials with the same figure of merit, the NFT with larger k material has higher efficiency. Doping materials to increase the material conduction electron density and growing film with larger size grain may be the way to increase k and reduce n.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of Indirect Exchange Interactions in a Mixed-Spin Bilayer Film with Nonmagnetic Layers

The magnetic properties (phase diagrams and magnetizations) of a mixed-spin Ising ferrimagnetic bilayer film on the graphene honeycomb lattice where two (A and B) layers separated by a number of nonmagnetic layers are investigated by the use of the effective field theory with correlations. The systems are consisted of two (spin-1/2 and spin-1) magnetic atoms where spin-1 atoms have a single-ion anisotropy. The effects of an indirect exchange interaction between the A and B layers are examined. Some characteristic behaviors have been found in the system, when the single-ion anisotropy takes a large negative value. Some characteristic phenomena of ferrimagnetism, have been found in the thermal variation of magnetization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Theory of Green’s Functions of Nambu-Goldstone and Higgs Modes in Superconductors

We examine fundamental properties of Green’s functions of Nambu-Goldstone and Higgs modes in superconductors with multiple order parameters. Nambu-Goldstone and Higgs modes are determined once the symmetry of the system and that of the order parameters are specified. Multiple Nambu-Goldstone modes and Higgs modes exist when we have multiple order parameters. The Nambu-Goldstone Green function D(ω, q) has the form 1/(gN(0)){sup 2}⋅(2Δ){sup 2}/(ω{sup 2}−c{sub s}{sup 2}q{sup 2}) with the coupling constant g and c{sub s}=v{sub F}/√3 for small ω and q, with a pole at ω = 0 and q = 0 indicating the existence of a massless mode. It is shown, based on the Ward-Takahashi identity, that the massless mode remains massless in the presence of intraband scattering due to non-magnetic and magnetic impurities. The pole of D(ω, q), however, disappears as ω increases as large as 2Δ: ω∼2Δ. The Green function H(ω, q) of the Higgs mode is given by H(ω,q)∝(2Δ){sup 2}/((2Δ){sup 2}−(1/3)ω{sup 2}+(1/3)c{sub s}{sup 2}q{sup 2}) for small ω and q, and H(ω, q) is proportional to 1/(gN(0)){sup 2}⋅Δ/√((2Δ){sup 2}+c{sub s}{sup 2}q{sup 2}−ω{sup 2}) for ω∼2Δ with the cut in the interval − ω(q) ≤ z ≡ q{sub 0} ≤ ω(q) where ω(q)=√((2Δ){sup 2}+c{sub s}{sup 2}q{sup 2}). The constant part of the action for the Higgs modes is important since it determines the coherence length of a superconductor. There is the case that it has a large eigenvalue, indicating that the large upper critical field H{sub c2} may be realized in a superconductor with multiple order parameters.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Predicting the Electric Field Effect on the Lateral Interactions Between Adsorbates: O/Fe(100) from First Principles

A density functional theory parameterized lattice gas cluster expansion of oxygen on an Fe(100) surface is developed in the presence and absence of an applied positive and negative external electric field, characterizing the heterogeneity in oxygen's surface distribution and the effect of an external electric field on the lateral interactions between the adsorbates. We show that the presence of a negative electric field tends to weaken both attractive and repulsive interactions while the positive electric field tends to strengthen these interactions, altering surface distributions and ground state configurations. Since lateral interactions have been shown to play a critical role in defining catalytic behavior, the application of an applied electric field has the potential to be a useful tool in adjusting critical chemical properties of Fe-based hydrodeoxygenation catalysts, by decreasing the repulsive interactions between the adspecies in the presence of a negative field and thereby mitigating the formation of an oxide.

Bray, Jacob E.↗

Search for plasmons in isotropic Luttinger semimetals

Luttinger semimetals include materials like gray tin (α-Sn) and mercury telluride, which are three-dimensional gapless semiconductors having a quadratic band crossing point (QBCP). Due to a growing interest in QBCPs and new experimental efforts, it is essential to study the finite-temperature properties of such systems. In this paper, we investigate the emergence of plasmons in the presence of Coulomb interactions in isotropic Luttinger semimetals, for zero as well as generic nonzero temperatures. When the Fermi level lies right at the QBCP, which is the point where twofold degenerate conduction and valence bands touch each other quadratically, we find that plasmons cannot appear at zero temperature. However, for nonzero temperatures, thermal plasmons are generated. Whether they are long-lived or not depends on the values of temperature, effective electron mass and effective fine-structure constant, and the number of fermion flavors. We also numerically estimate the behavior of the inelastic scattering rate at nonzero temperatures, as a function of energy, where the signatures of the QBCP thermal plasmons show up as a sharp peak. Our results will thus serve as a guide to experimental probes on these systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Direct acoustic phonon excitation by intense and ultrashort terahertz pulses

We report on the direct and resonant excitation of acoustic phonons in an AlGaAs intrinsic semiconductor using intense coherent and single cycle terahertz pulses created by two-color femtosecond laser pulse filamentation in air. While the electrons are left unperturbed, we follow the lattice dynamics with time-delayed optical photons tuned to the interband transition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thickness induced crossover from the ferromagnetic to cluster spin glass state in Cr{sub 70}Fe{sub 30} thin films

First five harmonics of the ac magnetic response were measuredas functions of temperature at different frequencies and with or without superposed dc magnetic field on Cr{sub 70}Fe{sub 30} thin films. An elaborate analysis of the linear susceptibility data reveals that (i) a well-defined paramagnetic (PM) to ferromagnetic (FM) phase transition, characterized by three-dimensional Heisenberg critical exponents, occurs for film thickness down to t≃ 90 nm, and (ii) the film with t≃40 nm exhibits experimental signatures in the critical region that are characteristic of both ferromagnets and spin glasses while the spin glass behavior dominates the FM one when t≃ 20 nm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A 3D simulation comparison of carrier transport in green and blue c-plane multi-quantum well nitride light emitting diodes

Until recently, the electrical efficiency of green nitride light-emitting diodes (LEDs) was considerably lower than that of blue LEDs. This is particularly surprising as one would expect a reduced forward voltage with increasing emission wavelength. In this paper, we theoretically investigated the impact of the number of quantum wells on the forward voltage of III-nitride LEDs with x = 0.15 (blue) and x = 0.24 (green) In x Ga1–xN QWs. The simulated dependence of current density (J) on applied diode bias (V) shows a significant increase of 1.9 V in the forward voltage between one and five quantum well (QW) c-plane green LED structures. Artificially turning off the polarization fields in the simulation does not entirely suppress this effect. Due to the large band offsets in the green LED multiple QW stack, simulations indicate a sequential band filling of the QW sequence. Furthermore, this mechanism should not be limited to c-plane LEDs and could also be present in nonpolar or semipolar devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tuning the quantumness of simple Bose systems: A universal phase diagram

We present a comprehensive theoretical study of the phase diagram of a system of many Bose particles interacting with a two-body central potential of the so-called Lennard-Jones form. First-principles path-integral computations are carried out, providing essentially exact numerical results on the thermodynamic properties. The theoretical model used here provides a realistic and remarkably general framework for describing simple Bose systems ranging from crystals to normal fluids to superfluids and gases. The interplay between particle interactions on the one hand and quantum indistinguishability and delocalization on the other hand is characterized by a single quantumness parameter, which can be tuned to engineer and explore different regimes. Taking advantage of the rare combination of the versatility of the many-body Hamiltonian and the possibility for exact computations, we systematically investigate the phases of the systems as a function of pressure (P) and temperature (T), as well as the quantumness parameter. Here, we show how the topology of the phase diagram evolves from the known case of 4 He, as the system is made more (and less) quantum, and compare our predictions with available results from mean-field theory. Possible realization and observation of the phases and physical regimes predicted here are discussed in various experimental systems, including hypothetical muonic matter.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ferromagnetic resonance in single vertices and 2D lattices macro-dipoles of elongated nanoelements: measurements and simulations

We report broadband ferromagnetic resonance measurements of the in-plane magnetic field response of three- and four-fold symmetric vertices formed by non-contacting permalloy nano-ellipses together with extended lattices constructed from them. Complementing the experimental data with simulations, we are able to show that, as far as the most intense FMR responses are concerned, the spectra of vertices and lattices can largely be interpreted in terms of a superposition of the underlying hysteretic responses of the individual ellipses, as elemental building blocks of the system. Here, this property suggest that it is possible to understand the orientation of the individual magnetic dipole moments in a dipole network in terms of dynamic measurements alone, thereby offering a powerful tool to analyze the alignment statistics in frustrated systems that are exposed to various magnetic histories.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Conditional probability density functional theory

Here we present conditional probability (CP) density functional theory (DFT) as a formally exact theory. In essence, CP-DFT determines the ground-state energy of a system by finding the CP density from a series of independent Kohn-Sham (KS) DFT calculations. By directly calculating CP densities, we bypass the need for an approximate XC energy functional. In this paper we discuss and derive several key properties of the CP density and corresponding CP-KS potential. Illustrative examples are used throughout to help guide the reader through the various concepts and theory presented. We explore a suitable CP-DFT approximation and discuss exact conditions, limitations, and results for selected examples.

36 MATERIALS SCIENCE↗

Classical dynamics of the antiferromagnetic Heisenberg spin ladder

We employ a classical limit grounded in SU(4) coherent states to investigate the temperature-dependent dynamical spin structure factor of the S = 1/2 ladder consisting of weakly coupled dimers. By comparing the outcomes of this classical approximation with density matrix renormalization group and exact diagonalization calculations in finite size ladders, we demonstrate that the classical dynamics offers an accurate approximation across the entire temperature range when the interdimer coupling is weak and a good approximation in the high temperature regime even when the interdimer coupling is strong. This agreement is achieved after appropriately rescaling the temperature axis and renormalizing expectation values to satisfy a quantum sum rule. Here, we anticipate the method will be particularly effective when applied to 2D and 3D lattices composed of weakly-coupled dimers, situations that remain challenging for alternative numerical methods.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Contact solitons as spin pistons in one-dimensional ferromagnetic channels

Ferromagnetic channels subject to spin injection have been theoretically shown to sustain dissipative exchange flows (DEFs). In the strong injection regime, a soliton is stabilized at the injection site, which has been termed a contact soliton DEF or CS-DEF. Here, in this work, we investigate the modulation of CS-DEFs as a mechanism to inject magnons into a DEF. By varying the injection current, the parameters connecting the soliton with the DEF via a boundary layer are varied. These lead to a modification in the DEF which is interpreted as a spin piston. The injected magnons follow the expected dispersion relation of DEFs, akin to the Bogoliubov–de Gennes dispersion relation. As a result, this work demonstrates that changes in the injected current can pump magnons along a ferromagnetic channel via dissipative exchange flows.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

London penetration depth and superfluid density of single-crystalline Fe 1 + y ( Te 1 - x Se x ) and Fe 1 + y ( Te 1 - x S x )

The in-plane London penetration depth, λ ( T ) , was measured in single crystals of the iron-chalcogenide superconductors Fe 1.03 ( Te 0.63 Se 0.37 ) and Fe 1.06 ( Te 0.88 S 0.14 ) by using a radio-frequency tunnel diode resonator. Similar to the iron-arsenides and in stark contrast to the iron-phosphides, iron-chalcogenides exhibit a nearly quadratic temperature variation of λ ( T ) at low temperatures. The absolute value of the penetration depth in the T → 0 limit was determined for Fe 1.03 ( Te 0.63 Se 0.37 ) by using an Al coating technique, giving λ ( 0 ) ≈ 560 ± 20 nm . The superfluid density ρ s ( T ) = λ 2 ( 0 ) / λ 2 ( T ) was fitted with a self-consistent two-gap γ model. While two different gaps are needed to describe the full-range temperature variation in ρ s ( T ) , a nonexponential low-temperature behavior requires pair-breaking scattering, and therefore an unconventional (e.g., s ± or nodal) order parameter.

36 MATERIALS SCIENCE↗

Influence of loading control on strain bursts and dislocation avalanches at the nanometer and micrometer scale

Through three-dimensional discrete dislocation dynamics simulations, we show that by tuning the mode of external loading, the collective dynamics of dislocations undergo a transition from driven avalanches under stress control to quasiperiodic oscillations under strain control. We directly correlate measured intermittent plastic events with internal dislocation activities and collective dynamics. Under different loading modes, the roles of the weakest dislocation source and the defect population trend are significantly different. This finding raises new possibilities of controlling correlated dislocation activities and obtaining a low defect density in nanostructured devices by tuning external constraints. In addition, the effect of machine stiffness comes to light. The statistical analysis of the burst magnitude is revisited and carefully discussed. Self-organized criticality and scale-free statistics of strain bursts are obeyed under stress control. However, this behavior is shown to break down under strain control. Rapid stress drops under pure strain control force truncation of dislocation avalanches, leading to a dynamical transition to quasiperiodic oscillations.

3-dimensional systems↗