Search NASA⌕ Search

SEARCH · Search NASA

Results for “Shuttle”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Experimental investigation of hypersonic buzz on a high cross-range shuttle configuration.

An experimental study confirming the existence of hypersonic buzz in the separated region of a space shuttle's downward deflected control surface is described. Wind tunnel tests in helium on a 1:100 scale model of a shuttle type configuration at M = 17.5 clearly demonstrated the occurrence of large scale pressure oscillations throughout a substantial range of angles of attack and control surface deflections. Measurements of surface pressure fluctuations along with high speed schlieren photography served to delineate the boundaries of the phenomenon and to identify the physical parameters necessary for the onset of a buzz condition. Prominent spectral energy peaks were also observed in the surface pressures that could be directly correlated with the instability. These conditions were found to be strongly dependent on the presence of multiple shock interactions and the position of these interactions relative to the location of a reattaching shear layer.

Goldman, R. L.↗

Application of the control configured vehicle concept to a Space Shuttle configuration.

Potential benefits and limitations of using automatic feedback control systems to provide artificial stabilization, rather than depending on inherent aerodynamic stability are discussed. A conventionally designed Space Shuttle vehicle is used as a baseline. Study results are based on parametric evaluations of configuration changes and control logic concepts suitable for unstable vehicles. Study results show that destabilizing the vehicle by moving the wing forward and reducing vertical tail area reduces the weight of a typical fly-back Space Shuttle booster configuration by 5430 pounds with little or no degradation in control performance. This is accomplished by modifying the aerodynamic controls, but without increasing control surface rate capability or the amount of reaction control fuel carried.

Wawrzyniak, M. E.↗

Aerothermodynamic technology for Space Shuttle - and beyond.

Wind-tunnel testing ground rules are discussed together with questions of orbiter heating, orbiter aerodynamics, flow fields, and ascent configurations. Aerodynamic heating is not expected to be of concern during ascent prior to solid rocket booster staging because of the relatively low staging velocity. It is pointed out that aerothermodynamics technology for the Space Shuttle orbiter has a three-year data base and is in hand. As shuttle support requirements diminish, and more effort can be brought to bear on advanced studies, advanced aerospace vehicle types, and their potential mission and operational requirements, will be explored in increasing depth.

Henderson, A., Jr.↗

Airbreathing engines for space shuttle.

The requirements imposed on the airbreathing engines by the shuttle mission and some results from engine design studies are discussed. In particular, some of the engine system weight study results are presented, potential problem areas and required engine modifications are identified, and testing requirements for a development and qualification program are discussed. The engines of interest for the shuttle are engines that are currently being developed for other applications. The potential problems, engine modifications, and testing requirements result primarily from the new environments associated with launch, space residence, and reentry.

Glassman, A. J.↗

Status of shuttle fuel cell technology program.

The hydrogen-oxygen fuel cell has been proved as an efficient and reliable electrical power supply for NASA manned-space-flight vehicles. It has thus ensured a role in the Space Shuttle Program as the primary electrical power supply for the Orbiter vehicle. The advanced fuel cell technology programs conducted under the management of the NASA Manned Spacecraft Center over the past two years have resulted in a high level of technical readiness in fuel cell power generation to support shuttle mission requirements. These programs have taken advantage of technological developments that have occurred since the designs were completed for the Gemini and Apollo fuel cells.

Rice, W. E.↗

Constrained optimal ascent-flyback shuttle trajectories.

An optimal Space Shuttle ascent-flyback trajectory shaping capability is presented which is based on the accelerated gradient parameter optimization technique. A typical atmospheric flight branched optimization problem is analyzed which required the determination of 31 parameters. This parameter set includes the description of the vehicle attitude control angles for three branches of Shuttle flight: first stage ascent, second stage ascent, and first stage flyback. The important in-flight inequality constraints required to maintain the integrity of the vehicle are considered. Results indicate that for a launch into a 55 deg inclined ellipse, a 13% increase in payload can be realized by using optimal control in the first-stage ascent rather than the conventional gravity-turn steering.

Kamm, J. L.↗

Space Shuttle booster recovery planning.

At the initiation of the Space Shuttle Program, recoverable solid rocket boosters were base-lined, with an estimated savings of 30 per cent over expendable solid rockets. Present studies indicate that the solid rocket boosters in the 142-inch diameter range can be recovered using state-of-the-art recovery systems. Marshall Space Flight Center is conducting extensive studies to establish the most cost effective recovery system for the present Shuttle boosters. Model drop testing, in various facilities, and structural load testing are being conducted with model sizes ranging from 6 inches to 120 inches in diameter.

Godfrey, R. E.↗

Space Shuttle status report.

A description is given of the design evolution during 1972-1973 of a reusable transportation system intended to place payloads of up to 65,000 lb in a 100 nm 28-degree inclination orbit, and to retrieve and return to earth 25,000 lb from orbit. The shuttle will be launched vertically as a rocket and will land horizontally as an airplane at about 170 kts with a cross range sufficient to return to the launch site after one orbit. The shuttle system is comprised of a reusable orbiter, two recoverable solid-propellant boosters, and an expendable liquid-propellant tank.

Peil, N. G.↗

Ocean recovery of Shuttle Solid Rocket Boosters.

Cost effective recovery of the expended Space-Shuttle Solid Rocket Boosters (SRB) from the ocean will result in significant overall cost savings to the Space Shuttle Program. The ocean recovery mission begins with the dispatching of the recovery team to the predicted splashdown area. The SRBs, drogue parachutes and main parachutes must be tracked, located, retrieved, and transported to land where they will be refurbished and recycled for reuse. Trade studies to be conducted will consider the recovery mission requirements and weigh the advantages, disadvantages and costs of various candidate recovery systems. Major parameters effecting the selection of the final system will ensure that the system will meet overall objectives. Large- and small-scale SRB model testing has been conducted to establish characteristics of SRBs during water entry, floating free and under tow.

Junker, L. J.↗

Space Shuttle system solid rocket booster.

Description of the mission and systems requirement of the solid rocket booster as it supports the Shuttle vehicle configuration. The solid booster is equipped with load skirts and linkages that can accommodate full mission loads, a solid propellant motor for delivering required performance, thrust vector control for augmentation of Shuttle vehicle ascent control, staging and separation systems, and electrical subsystems. To recover and reuse the solid booster case a recovery package is provided. The definition of these functional elements of the solid booster are discussed with the requirements placed on each element to satisfy the overall booster objective.

Thomason, H. E.↗

A shuttle compatible advanced technology laboratory.

Discussion of the advanced technology laboratory concept developed at the Langley Research Center as a means for effectively conducting and managing its shuttle experiments using the shuttle sortie mode of operation. The Center is provided with a space counterpart to its ground-based laboratory through which space can be made routinely available to the Langley researcher. This concept is serving as a focal point in planning to meet Langley's future needs in the 70's and 80's.

Sivertson, W. E., Jr.↗

Shuttle-Attached Manipulator System requirements.

Shuttle mission requirements and cost objectives have led to the selection of a Shuttle-Attached Manipulator System (SAMS) as a general purpose mechanism for docking, payload handling, and the general launch and retrieval of free-flying satellites. SAMS design requirements are discussed, giving attention to end effectors, kinematics, timelines, dynamics, load ratings, TV cameras and lights. Requirements for low-cost payload satellites are considered, taking into account satellites with modular subsystems which are designed for replacement and for resupply in orbit by SAMS.

Bodey, C. E.↗

Preliminary design and simulations of a Shuttle-Attached Manipulator System.

The preliminary design of a Shuttle-Attached Manipulator System is based on two arms that are articulated at shoulder, elbow, and wrist. Details of manipulator design are considered, giving attention to arm reach, velocity, acceleration, torque, joint angular travel limits, control, crew systems and man-machine interface, and telecommunications. The results of man-in-the-loop simulations show the feasibility of grappling a representative space payload from the Shuttle using a long boom manipulator system. The task, however, is sufficiently difficult to require the full concentration of one operator who should be relieved of any other tasks while performing operations with the manipulator system.

Brodie, S. B.↗

Space Shuttle Program overview.

The Space Shuttle Program is described in terms of the master planning schedule, design details of the Orbiter vehicle and solid rocket boosters, and payload capabilities of the vehicle for various types of missions. Initial flight tests are described along with subsequent envisioned operational missions. Additional topics include individual phases comprising a complete Space Shuttle mission, typical payload curves for various circular and elliptical orbit missions, details of the payload bay and the remote payload manipulator system, and a general listing of avionics provisions in the vehicle.

Everline, R. T.↗

Space Shuttle flight operations.

The current flight operations concepts for the Space Shuttle are outlined, with emphasis on vehicle and ground support functions in actual missions exclusive of initial tests. The Space Shuttle sortie and delivery-retrieval mission profiles are described along with crew nomenclature and duties, vehicle launch-to-insertion operations, systems operation, correction measures for noncritical malfunctions, management of consumables, payload operations, radiation and contamination monitoring, reentry and landing procedures, and ground support operations.

Carlton, R. L.↗

Nuclear safety considerations for the design of a shuttle launched 500 to 2000 watt isotope Brayton power system.

An extensive study was conducted to evaluate the safety requirements for the design of a heat source assembly for use in a shuttle launched, isotope Brayton electric power system for the 500-W(e) to 2 kWe range. The assembly is a self-contained package which supplies heat to a power conversion system. A typical mission profile for a shuttle launched, earth orbital mission was assumed. Critical mission accidents were identified and evaluated to determine their impact upon the design of the Heat Source Assembly. Earth-orbital decay reentry analyses were performed to demonstrate survivability of the heat source. Safety design requirements were developed to ensure survivability under credible accident conditions including loss of the power conversion system in orbit.

Garate, J. A.↗

Institutional environmental impact statement (space shuttle development and operations) amendment no. 1

Data are presented to support the environmental impact statement on space shuttle actions at Kennedy Space Center. Studies indicate that land use to accommodate space shuttle operations may have the most significant impact. The impacts on air, water and noise quality are predicted to be less on the on-site environment. Considerations of operating modes indicate that long and short term land use will not affect wildlife productivity. The potential for adverse environmental impact is small and such impacts will be local, short in duration, controllable, and environmentally acceptable.

Source record↗

Alternate propellants for the space shuttle solid rocket booster motors

As part of the Shuttle Exhaust Effects Panel (SEEP) program for fiscal year 1973, a limited study was performed to determine the feasibility of minimizing the environmental impact associated with the operation of the solid rocket booster motors (SRBMs) in projected space shuttle launches. Eleven hypothetical and two existing limited-experience propellants were evaluated as possible alternates to a well-proven state-of-the-art reference propellant with respect to reducing emissions of primary concern: namely, hydrogen chloride (HCl) and aluminum oxide (Al2O3). The study showed that it would be possible to develop a new propellant to effect a considerable reduction of HCl or Al2O3 emissions. At the one extreme, a 23% reduction of HCl is possible along with a ll% reduction in Al2O3, whereas, at the other extreme, a 75% reduction of Al2O3 is possible, but with a resultant 5% increase in HCl.

Source record↗