Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural Effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

The Effect of Bismuth on the Structural Perfection and the Luminescent Properties of Thin-Film Elastically Stressed Al{sub x}In{sub y}Ga{sub 1–x–y}Bi{sub z}Sb{sub 1–z}/GaSb Heterostructures

The effect of bismuth on the structural perfection and the luminescent properties of Al{sub x}In{sub y}Ga{sub 1–x–y}Bi{sub z}Sb{sub 1–z}/GaSb heterostructures has been studied. The optimal parameters of the process of zone recrystallization with temperature gradient at which epitaxial AlInGaBiSb layers have the minimum roughness and high structural perfection have been revealed: temperature gradient 1 ≤ G ≤ 30 K/cm, the liquid zone thickness 60 ≤ l ≤ 100 μm, the temperature range 773 K ≤ T ≤ 873 K, and bismuth concentration 0.3–0.4 mol fraction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of cryoprotectants on the structure and thermostability of the human carbonic anhydrase II–acetazolamide complex

Here, a case study of the effects of cryoprotectants on the kinetics of carbonic anhydrase II (CA II) and its inhibition by the clinically used inhibitor acetazolamide (AZM) is presented. Protein X-ray crystallography has seen a progressive shift from data collection at cool/room temperature (277–298 K) to data collection at cryotemperature (100 K) because of its ease of crystal preparation and the lessening of the detrimental effects of radiation-induced crystal damage, with 20–25%(v/v) glycerol (GOL) being the preferred choice of cryoprotectant. Here, a case study of the effects of cryoprotectants on the kinetics of carbonic anhydrase II (CA II) and its inhibition by the clinically used inhibitor acetazolamide (AZM) is presented. Comparative studies of crystal structure, kinetics, inhibition and thermostability were performed on CA II and its complex with AZM in the presence of either GOL or sucrose. These results suggest that even though the cryoprotectant GOL was previously shown to be directly bound in the active site and to interact with AZM, it affects neither the thermostability of CA II nor the binding of AZM in the crystal structure or in solution. However, addition of GOL does affect the kinetics of CA II, presumably as it displaces the water proton-transfer network in the active site.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Two prospective Li-based half-Heusler alloys for spintronic applications based on structural stability and spin–orbit effect

To search for half-metallic materials for spintronic applications, instead of using an expensive trial-and-error experimental scheme, it is more efficient to use first-principles calculations to design materials first, and then grow them. In particular, using a priori information of the structural stability and the effect of the spin–orbit interaction (SOI) enables experimentalists to focus on favorable properties that make growing half-metals easier. We suggest that using acoustic phonon spectra is the best way to address the stability of promising half-metallic materials. Additionally, by carrying out accurate first-principles calculations, we propose two criteria for neglecting the SOI so the half-metallicity persists. As a result, based on the mechanical stability and the negligible SOI, we identified two half-metals, β-LiCrAs and β-LiMnSi, as promising half-Heusler alloys worth growing.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

EFFECT OF FUEL IMPURITY ON STRUCTURAL INTEGRITY OF Ni-YSZ ANODE OF SOFCS

Electricity production through the integration of coal gasification with solid oxide fuel cells (SOFCs) may potentially be an efficient technique for clean energy generation. However, multiple minor and trace components are naturally present in coals. These impurities in coal gas not only degrade the electrochemical performance of Ni-YSZ anode used in SOFCs, but also severely endanger the structural integrity of the Ni-YSZ anode. In this paper, effect of the trace impurity of the coal syngases on the mechanical degradation of Ni-YSZ anode was studied by using an integrated experimental/modeling approach. Phosphorus is taken as an example of impurity. Anode-support button cell was used to experimentally explore the migration of phosphorous impurity in the Ni-YSZ anode of SOFCs. X-ray mapping was used to show elemental distributions and new phase formation. The subsequent finite element stress analyses were conducted using the actual microstructure of the anode to illustrate the degradation mechanism. It was found that volume expansion induced by the Ni phase change produces high stress level such that local failure of the Ni-YSZ anode is possible under the operating conditions

experimental and modeling↗

EFFECT OF FUEL IMPURITY ON STRUCTURAL INTEGRITY OF Ni-YSZ ANODE OF SOFCs

Electricity production through the integration of coal gasification with solid oxide fuel cells (SOFCs) may potentially be an efficient technique for clean energy generation. However, multiple minor and trace components are naturally present in coals. These impurities in coal gas not only degrade the electrochemical performance of Ni-YSZ anode used in SOFCs, but also severely endanger the structural integrity of the Ni-YSZ anode. In this paper, effect of the trace impurity of the coal syngases on the mechanical degradation of Ni-YSZ anode was studied by using an integrated experimental/modeling approach. Phosphorus is taken as an example of impurity. Anode-support button cell was used to experimentally explore the migration of phosphorous impurity in the Ni-YSZ anode of SOFCs. X-ray mapping was used to show elemental distributions and new phase formation. The subsequent finite element stress analyses were conducted using the actual microstructure of the anode to illustrate the degradation mechanism. It was found that volume expansion induced by the Ni phase change produces high stress level such that local failure of the Ni-YSZ anode is possible under the operating conditions

01 COAL, LIGNITE, AND PEAT↗

Fire, insect and disease‐caused tree mortalities increased in forests of greater structural diversity during drought

Abstract Structural diversity is an emerging dimension of biodiversity that accounts for size variations in organs among individuals in a community. Previous studies show significant effects of structural diversity on forest growth, but its effects on forest mortality are not known, particularly at a large scale. To address this knowledge gap, we quantified structural diversity using stem structural diversity (SSD) based on both tree diameter and height. We obtained U.S. Forest Service Forest Inventory and Analysis (FIA) data from over 2400 plots across southcentral U.S. forests that have suffered a recent drought. Using data from multiple sampling times, we calculated SSD and compared the relative importance of SSD, species diversity, functional diversity and other stand attributes in determining tree mortalities caused by fire, insects and diseases. We also used FIRETEC, a physics‐based fire model, to test the effect of SSD on canopy consumption by fire. Our results showed that (1) SSD was positively associated with tree mortalities caused by all three disturbances; (2) species richness was negatively associated with insect‐ and disease‐caused mortalities; (3) functional diversity was negatively associated with fire‐ and disease‐caused mortalities and (4) more phylogenetically related species had more similar mortality rates by insect and disease but not fire. Moreover, the FIRETEC model showed increasing canopy consumption by fire in stands with greater SSD. Together, the different tree mortalities during drought associated with SSD more consistently than the other biodiversity metrics were evaluated. Synthesis . Our results suggest that SSD could be considered in modelling forest dynamics and planning management to sustain forest health under disturbances.

54 ENVIRONMENTAL SCIENCES↗

Effect of water models on structure and dynamics of lignin in solution

Lignin, a major biomass component, can be an excellent source for different monomers in the polymer industry. However, the complex and heterogeneous structure of lignin poses a significant challenge for designing energy-efficient processes for depolymerization. As many proposed depolymerization processes are solvothermal, it is essential to understand the structure and dynamics of lignin in solution, in particular aqueous solution. Here, we utilize molecular dynamics simulations to understand the effect of water models on the structure and dynamics of different model lignin oligomers (softwood and hardwood) as a function of temperature. We have examined three different water models: TIP3P, TIP4P/Ew, and flexible SPC/Fw. We find that the diffusion constant of lignin oligomers in an aqueous solution differs significantly depending on the water model used. The diffusion constant of lignin in the TIP3P water model is almost twice as large as that in SPC/Fw and TIP4P/Ew. The softwood and hardwood oligomers adopt an extended structure in TIP3P water compared to SPC/Fw and TIP4P/Ew. Given the different levels of sensitivity of transport and structural properties of aqueous lignin on water models, it is important to take these into account when discussing results from a specific water model.

09 BIOMASS FUELS↗

Advances and Promises of Layered Halide Hybrid Perovskite Semiconductors

Layered halide hybrid organic–inorganic perovskites (HOP) have been the subject of intense investigation before the rise of three-dimensional (3D) HOP and their impressive performance in solar cells. Recently, layered HOP have also been proposed as attractive alternatives for photostable solar cells and revisited for light-emitting devices. Here, we combine classical solid-state physics concepts with simulation tools based on density functional theory to overview the main features of the optoelectronic properties of layered HOP. A detailed comparison between layered and 3D HOP is performed to highlight differences and similarities. In the same way as the cubic phase was established for 3D HOP, here we introduce the tetragonal phase with D 4h symmetry as the reference phase for 2D monolayered HOP. It allows for detailed analysis of the spin–orbit coupling effects and structural transitions with corresponding electronic band folding. We further investigate the effects of octahedral tilting on the band gap, loss of inversion symmetry and possible Rashba effect, quantum confinement, and dielectric confinement related to the organic barrier, up to excitonic properties. Altogether, this paper aims to provide an interpretive and predictive framework for 3D and 2D layered HOP optoelectronic properties.

14 SOLAR ENERGY↗

Time-dependent local and average structural evolution of δ-phase 239 Pu-Ga alloys

Here, plutonium metal is a very unusual element, exhibiting six allotropes at ambient pressure, between room temperature and its melting point, a complicated phase diagram, and a complex electronic structure. Many phases of plutonium metal are unstable with changes in temperature, pressure, chemical additions, or time. This strongly affects structure and properties, and becomes of high importance, particularly when considering effects on structural integrity over long periods of time [1]. This paper presents a time-dependent neutron total scattering study of the local and average structure of naturally aging δ-phase 239 Pu-Ga alloys, together with preliminary results on neutron tomography characterization.

36 MATERIALS SCIENCE↗

Average Structure Evolution of δ-phase Pu-Ga Alloys

[Full Text] Plutonium metal is a highly unusual element, exhibiting six allotropes at ambient pressure, from room temperature to its melting point. Many phases of plutonium metal are unstable with temperature, pressure, chemical additions, and time. This strongly affects structure and properties, and becomes of high importance, particularly when considering effects on structural integrity over long time periods. The fcc δ-phase deserves additional attention, not only in the context of understanding the electronic structure of Pu, but also as one of the few high-symmetry actinide phases that can be stabilized down to ambient pressure and room temperature by alloying it with trivalent elements. We will present results on recent work on aging of Pu-2at.%Ga and Pu-7at.%Ga alloys

36 MATERIALS SCIENCE↗

Single crystal growth and superconductivity of Ca(Fe1-xCox)2As2

We report the single crystal growth of Ca(Fe1-xCox)2As2 (0 <= x <= 0.082) from Sn flux. The temperature-composition phase diagram is mapped out based on the magnetic susceptibility and electrical transport measurements. Phase diagram of Ca(Fe1-xCox)2As2 is qualitatively different from those of Sr and Ba, it could be due to both the charge doping and structural tuning effects associated with Co substitution.

36 MATERIALS SCIENCE↗

Simulation of Helium Flow Visualization Apparatus for Studies of Blanket Cooling in Fusion Reactors

Flow visualization is essential to understanding helium cooling performance. This article investigates helium flow visualization in an apparatus to support the design of the blanket first wall for a fusion reactor. Helium’s safety advantages make it an attractive coolant, but effective cooling and flow visualization remain challenging. Sophisticated simulations are conducted in different test sections to address three key areas in the design of a test apparatus and cooling channel enhancements: the influence of viewing glass windows on flow patterns, the impact of increased heating, and the effectiveness of cooling structures like baffles. Viewing glass windows introduce flow recirculation region bifurcation and flow asymmetry, affecting flow patterns and necessitating careful analysis in future experiments. Increased heating results in helium flow detachment from the heated surface, leading to hot spots. Cooling structures, particularly baffles, prove effective in maintaining consistent attachment to the heated surface, improving the heat transfer performance. Further, this study also examines a tunable parameter in the turbulence model, highlighting the importance of accurate model tuning for future fusion reactor cooling designs. With an imminent helium flow visualization facility, these simulations will be used to optimize cooling structures on the heated wall to improve flow attachment and heat transfer efficiency. This work serves as a first investigation of the helium flow visualization apparatus for blanket cooling enhancement in fusion reactor design.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spin scattering and noncollinear spin structure-induced intrinsic anomalous Hall effect in antiferromagnetic topological insulator MnB i 2 T e 4

MnB i 2 T e 4 has recently been established as an intrinsic antiferromagnetic (AFM) topological insulator—an ideal platform to create quantum anomalous Hall insulator and axion insulator states. We performed comprehensive studies on the structure, nontrivial surface state, and magnetotransport properties of this material. Our results reveal an intrinsic anomalous Hall effect arising from a noncollinear spin structure for the magnetic field parallel to the c axis. We observed negative magnetoresistance under arbitrary field orientation below and above the Néel temperature (T N ) , providing clear evidence for strong spin fluctuation-driven spin scattering in both the AFM and paramagnetic states. Furthermore, we found that the nontrivial surface state opens a large gap (~85 meV) even far above TN. Our findings demonstrate that the bulk band structure of MnB i 2 T e 4 is strongly coupled with the magnetic property and that a net Berry curvature in momentum space can be created in the canted AFM state. In addition, our results imply that the gap opening in the surface states is intrinsic, likely caused by the strong spin fluctuations in this material.

Angle-resolved photoemission spectroscopy↗

Structural characterisation of the perovskite series Sr{sub x}Ca{sub 1-x-y}Nd{sub y}MnO{sub 3}: Influence of the Jahn-Teller effect

The crystal structures of the perovskite manganites Sr{sub x}Ca{sub 1-x-y}Nd{sub y}MnO{sub 3} with y=0.1 or 0.2 have been investigated using synchrotron X-ray powder diffraction. At room temperature the structures change from Pm3-barmreversibleI4/mcmreversiblePbnm depending on the cation distribution, the different structures exhibiting different tilts of the MnO{sub 6} octahedra. High temperature diffraction measurements demonstrate the presence of, an apparently continuous, isosymmetric I4/mcm to I4/mcm phase transition associated with the removal of long range orbital ordering. Heating the manganites to still higher temperatures results in a continuous transition to the cubic Pm3-barm structure. A feature of such transitions is the continuous evolution of the octahedral tilt angle through the I4/mcm to I4/mcm phase transition. The orthorhombic structures do not exhibit orbital ordering and although a first order transition to the tetragonal structure is observed in Sr{sub 0.4}Ca{sub 0.5}Nd{sub 0.1}MnO{sub 3}, this high temperature tetragonal structure does not exhibit orbital ordering. - Graphical abstract: Structural studies of oxides of the type Sr{sub x}Ca{sub 1-x-y}Nd{sub y}MnO{sub 3} series illustrate the continuous removal of the octahedral tilting, despite the loss of orbital ordering.

36 MATERIALS SCIENCE↗

Forecasting dark showers at Belle II

Dark showers from strongly interacting dark sectors that confine at the GeV scale can give rise to novel signatures at e + e - colliders. In this work, we study the sensitivity of B factory experiments to dark showers produced through an effective interaction arising from a heavy off-shell mediator. We show that a prospective search for displaced vertices from GeV-scale long-lived particles at Belle II can improve the sensitivity to dark showers substantially compared to an existing search at BaBar. We compare the sensitivity of searches for displaced signals to searches for promptly produced resonances at BaBar and KLOE and calculate sensitivity projections for a single-photon search at Belle II to invisible dark showers produced through an effective interaction. The underlying structure of the effective interaction can be resolved at higher-energy experiments, where the mediator can be produced on-shell. To study the resulting constraints, we update electroweak precision bounds on kinetically mixed Z' bosons and reinterpret a search for low-mass di-muon resonances at LHCb in terms of dark showers. We find that LHCb and Belle II are most sensitive to different particle decay lengths, underscoring the complementarity of LHC and intensity frontier experiments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Solid face sheets enable lattice metamaterials to withstand high-amplitude impulsive loading without yielding

Owing to their ability to provide tunable mechanical responses, lattice materials are frequently studied to elucidate their response to static and dynamic loads. However, these roles are typically in opposition: static loads must be supported sufficiently far away from the onset of buckling or yielding, whereas dynamic loads are typically ameliorated by crushing of the lattice, which provides excellent energy-absorption due to the large plastic deformation accompanying densification. In contrast, this work considers the octet truss as an exemplar topology, in a structural role where it must simultaneously support static loads while enduring high-amplitude impulsive loads. This study focuses on the ability to withstand impulsive loads without yielding, an essential prerequisite to enduring dual loading. Computational studies using the ALE3D hydrocode were performed to examine the response of the octet truss under a short temporal width impulse shape associated with laser-driven shocks. A key finding was that covering the lattice with a solid face sheet and treating this face sheet thickness as a design variable allows the Taylor-like pulse to be attenuated prior to entering the weaker lattice, at the cost of added mass up front. Experimental validation was accomplished by laser-driven shock testing, using octet trusses printed out of Ti-5Al-5V-5Mo-3Cr. The results show that for a given quantity of mass, the attenuation is maximized when as much mass as possible is moved into the face sheet, leaving a more slender lattice structure. The effect of placing mass in the face sheet rather than lattice beams dominates the effect of relative density, to the point where a low-mass structure with most of the mass concentrated in the face sheet can outperform a high-mass structure with most of the mass in the lattice. Finally, by further understanding the propagation of short pulse width waves within under-dense structures, this study expand the domain of applicability of such structures, including lattice materials, to challenging dual-loading regimes spanning decades of strain rates.

36 MATERIALS SCIENCE↗