Search NASA⌕ Search

SEARCH · Search NASA

Results for “THERMIONICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Research on pinching characteristics of electron beams emitted from different cathode surfaces of a rod-pinch diode

The particle-in-cell code UNIPIC is used to simulate the working process of a rod-pinch diode and investigate the pinching characteristics of electron beams emitted from different cathode surfaces. The simulation results indicate that the electron beam emitted from the upstream surface pinches better than from other surfaces when all the three surfaces emit electrons. The charge-density deposition on the anode surface peaks at the rod tip while the deposited charge density is approximately uniform over the first 15 mm of the rod before rapidly increasing over the last 3 mm, indicating a large axial extent of electron deposition. For the case of single-surface emission, the pinching quality of the electron beam emitted from the downstream surface is better than those from other surfaces. The charge-density deposition peaks at the rod tip and decreases rapidly off the tip. Based on the relationship of Larmor radius, beam's self-magnetic field, and the spatial current distribution, the above simulation results are analyzed theoretically. The experiments are performed on the inductive voltage adder to examine the simulations. By comparing the axial distribution of the radiation on the anode rod measured with the pinhole camera and the on-axis forward x-ray dose measured with the LiF thermoluminescent detectors, the simulation results are verified. The electron emission suppression method and the impedance change for each case are investigated or discussed in this paper.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High-current diode with ferroelectric plasma source-assisted hollow anode

The operation of a ferroelectric plasma source-assisted hollow anode (HA) electron source in a vacuum diode powered by an {approx}200 kV and {approx}400 ns pulsed generator was studied using time- and space-resolved laser induced fluorescence diagnostics. It was found that the plasma ion ''temperature'' in the vicinity of the HA output grid increases up to {approx}15 eV during the accelerating pulse, which is consistent with a model of the potential screening of the grid by the randomly moving ions [Phys. Plasmas 13, 073506 (2006)]. Also it was shown that the increase in the HA plasma potential up to several kilovolts because of the appearance of a noncompensated ion charge in the HA bulk plasma due to electrons fast extraction, leads to explosive emission centers being generated at the HA grid and to nonuniformity in the cross-sectional electron beam current density. Finally, the plasma prefilled mode of diode operation was studied using a simple one-dimensional model of the plasma erosion and the HA plasma electron heating by energetic ions was considered.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electromagnetic power loss in open coaxial diodes and the Langmuir-Blodgett law

The space charge limited current in coaxial diodes with electromagnetic power loss is studied. The Langmuir-Blodgett law is expressed in terms of the electromagnetic power loss and the applied voltage. Particle-in-cell simulations of photodiode-like situations and high power diodes confirm the relation between the applied voltage, diode voltage, and electromagnetic power loss.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

An upper bound to time-averaged space-charge limited diode currents

The Child-Langmuir law limits the steady-state current density across a one-dimensional planar diode. While it is known that the peak current density can surpass this limit when the boundary conditions vary in time, it remains an open question of whether the average current can violate the Child-Langmuir limit under time-dependent conditions. For the case where the applied voltage is constant but the electric field at the cathode is allowed to vary in time, one-dimensional particle-in-cell simulations suggest that such a violation is impossible. Although a formal proof is not given, an upper bound on the time-averaged current density is offered.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma expansion and impedance collapse in a foil-less diode for a klystronlike relativistic backward wave oscillator

Klystronlike relativistic backward wave oscillator (RBWO) can produce microwave power exceeding 5 GW with a high efficiency larger than 40%. In the experiment of klystronlike RBWO, for about 1 MV peak diode voltages, increasing magnetic field from 1.43 to 1.89 T slowed the impedance collapse until it was suppressed completely. The introduction of a stainless steel obstructing ring aggravated the impedance collapse, whereas replacing the stainless steel obstructing ring with a flat stainless steel provided a more stable impedance variation during the pulse duration. These impedance collapses did not affect microwave generation seriously and may be attributed to the radial expansion of cathode plasma initialing from the cathode shank so that part of reverse currents were collected at the anode wall, contributing to the measured diode current. On the other hand, it was found that microwave generation shot-to-shot reproducibility was closely related to the diode impedance variation. When there was no or very low microwave measured, diode impedance collapse appeared at the latter of the pulse. The microwave generation shot-to-shot reproducibility was improved greatly after the electron collector was enlarged on radius with 1 mm. A possible explanation is that the anode plasma produced from electron collector expands axially and enters the diode region at a very high velocity of several mm/ns. The movement of the anode plasma in the beam-wave interaction region affects the microwave generation, which reduces the microwave power during the whole pulse duration significantly.

43 PARTICLE ACCELERATORS↗

The effect of ion current density amplification in a diode with passive anode in magnetic self-isolation mode

The results of a study on gigawatt power pulsed ion beam parameters are presented here. The pulsed ion beam is formed by a diode with an explosive-emission potential electrode, in magnetic self-isolation mode [A. I. Pushkarev, J. I. Isakova, M. S. Saltimakov et al., Phys. Plasmas 17, 013104 (2010)]. The ion current density is 20-40 A/cm{sup 2}, the energy of the ions is 200-250 keV, and the beam composition is of protons and carbon ions. Experiments have been performed on the TEMP-4M accelerator, set in double-pulse formation mode. To measure the beam parameters, we used a time-of-flight diagnosis. It is shown that the carbon ion current density, formed in a planar diode with graphite potential electrode, is five to seven times higher than the values calculated from the Child-Langmuir ratio. A model of ion current density amplification in a diode with magnetic self-isolation is proposed. The motion of electrons in the anode-cathode gap is simulated using the program CST PARTICLE STUDIO.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Biparametric equilibria bifurcations of the Pierce diode: A one-dimensional plasma-filled device

The equilibria bifurcations of the biparametric version of the classical Pierce diode, a one-dimensional plasma-filled device, are analyzed in detail. Our investigation reveals that this spatiotemporal model is not structurally stable in relation to a second control parameter, the ratio of the plasma ion density to the injected electron beam density. For the first time, we relate the existence of one-fluid chaotic regions with specific biparametric equilibria bifurcations, identifying the restricted regions in the parametric plane where they occur. We show that the system presents several biparametric scenarios involving codimension-two transcritical bifurcations. Finally, we provide the spatial profile of the stable and unstable one-fluid equilibria in order to describe their metamorphoses.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Relativistic Bursian diode equilibria

A comprehensive study of steady-states of a planar vacuum diode driven by a cold relativistic electron beam is presented. The emitter electric field as a characteristic function for their existence is evaluated in dependence of the diode length, the applied potential V, and the relativistic beam factor at injection {gamma}{sub 0}. It is used to classify the different branches of possible solutions, which encompass electron flows that are (i) transmitted through the diode completely, (ii) partially reflected from a virtual cathode (VC) either within the diode region or at the collector side, and (iii) reflected totally. As a byproduct, the V and {gamma}{sub 0} dependences of both bifurcation points of the minimum potential and of the transmitted current are obtained and the ultrarelativistic limit, {gamma}{sub 0}>>1, is performed. In this highly relativistic regime, the density of electrons appears to be constant across the diode region except for a small area around the VC.

43 PARTICLE ACCELERATORS↗

Ion diode performance on a positive polarity inductive voltage adder with layered magnetically insulated transmission line flow

A pinch-reflex ion diode is fielded on the pulsed-power machine Mercury (R. J. Allen, et al., 15th IEEE Intl. Pulsed Power Conf., Monterey, CA, 2005, p. 339), which has an inductive voltage adder (IVA) architecture and a magnetically insulated transmission line (MITL). Mercury is operated in positive polarity resulting in layered MITL flow as emitted electrons are born at a different potential in each of the adder cavities. The usual method for estimating the voltage by measuring the bound current in the cathode and anode of the MITL is not accurate with layered flow, and the interaction of the MITL flow with a pinched-beam ion diode load has not been studied previously. Other methods for determining the diode voltage are applied, ion diode performance is experimentally characterized and evaluated, and circuit and particle-in-cell (PIC) simulations are performed. Results indicate that the ion diode couples efficiently to the machine operating at a diode voltage of about 3.5 MV and a total current of about 325 kA, with an ion current of about 70 kA of which about 60 kA is proton current. It is also found that the layered flow impedance of the MITL is about half the vacuum impedance.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Investigation of the foreplasma parameters of a laser-plasma diode

The results of computing experiments are presented, which allow estimating the parameters of the laser foreplasma used to initiate a discharge in a laser-plasma diode. The resultant plasma is a material medium which carries a high-power discharge current. This opens a possibility to make a compact source of hard X-ray radiation and fast-ion streams. Proceeding from our numerical simulations we derive similarity relations, which enable determining the fluxes of plasma mass and charge as functions of laser pulse parameters. (effects of laser radiation on matter. laser plasma)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

TiN diffusion barrier for stable W/SiC(0001) interfaces in inert ambient at high temperature

The effect of high-temperature annealing on tungsten (W) films deposited on silicon carbide (SiC) with and without a titanium nitride (TiN) diffusion barrier was examined as a function of time. Evolutions in phase composition, surface morphology, and roughness from annealing at 1273 K were investigated for up to 24 h. Without a TiN diffusion barrier, solid state reactions between the W film and SiC substrate led to the formation of W 5 Si 3 , W 2 C, and WC species and the rise of an inhomogeneous surface structure that was initially web-like and later discontinuous. Severe roughening on the order of the initial film thickness was observed. Incorporation of a 100 nm TiN diffusion barrier suppressed the formation of W 5 Si 3 and W 2 C and only trace WC could be detected due to species diffusion through TiN grain boundaries. Changes in the surface structure and roughness were minimal. Our results warrant consideration of TiN as an effective diffusion barrier for W on SiC systems where structural stability at high temperatures is highly desired.

36 MATERIALS SCIENCE↗

Plasma expansion and fast gap closure in a high power electron beam diode

High power electron beam generation studies were carried out in a planar diode configuration to investigate the effect of the accelerating gap, diode voltage, and anode-cathode materials on the electrode plasma expansion. The diode voltage has been varied from 145-428 kV, whereas the current density has been varied from 208-2215 A/cm{sup 2} with 100 ns pulse duration. It was found that the diode voltage and current follow the bipolar space-charge limited flow model. The anode and cathode plasma expansion velocities were calculated using the perveance data. The plasma expands at 11 cm/{mu}s for 34 mm anode-cathode gap and the plasma velocity decreases for smaller gaps. It was found that the plasma expansion velocity increases significantly due to the cathode edge contribution and the edge contribution is particularly important during the beginning and the end of the accelerating pulse when the diode voltage and the corresponding electric field are comparatively low. It was also observed that the diode current increased by a factor of 3 when anode material was released into the accelerating gap due to the electron beam bombardment.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the saturation in the average transmitted current in two-dimensional planar diodes

The relation between average transmitted current density (J{sub TR}) and injected current density (J{sub IN}) in a two-dimensional planar diode is investigated using particle-in-cell simulation. Beyond the space charge limited value of injected current density, J{sub TR} is found to increase slowly with J{sub IN} and finally saturate for higher values. The physics of gradual increase in J{sub TR} to the saturation value is explained using the electric field profile at the cathode surface.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Characteristics of a velvet cathode under high repetition rate pulse operation

As commonly used material for cold cathodes, velvet works well in single shot and low repetition rate (rep-rate) high-power microwave (HPM) sources. In order to determine the feasibility of velvet cathodes under high rep-rate operation, a series of experiments are carried out on a high-power diode, driven by a {approx}300 kV, {approx}6 ns, {approx}100 {omega}, and 1-300 Hz rep-rate pulser, Torch 02. Characteristics of vacuum compatibility and cathode lifetime under different pulse rep-rate are focused on in this paper. Results of time-resolved pressure history, diode performance, shot-to-shot reproducibility, and velvet microstructure changes are presented. As the rep-rate increases, the equilibrium pressure grows hyperlinearly and the velvet lifetime decreases sharply. At 300 Hz, the pressure in the given diode exceeded 1 Pa, and the utility shots decreased to 2000 pulses for nonstop mode. While, until the velvet begins to degrade, the pulse-to-pulse instability of diode voltage and current is quite small, even under high rep-rate conditions. Possible reasons for the operation limits are discussed, and methods to improve the performance of a rep-rate velvet cathode are also suggested. These results may be of interest to the repetitive HPM systems with cold cathodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

K-line spectra from tungsten heated by an intense pulsed electron beam

The plasma-filled rod-pinch diode (PFRP) is an intense source of x-rays ideal for radiography of dense objects. In the PRFP megavoltage electrons from a pulsed discharge concentrate at the pointed end of a 1 mm diameter tapered tungsten rod. Ionization of this plasma might increase the energy of tungsten's K{alpha}{sub 1} fluorescence line, at 59.3182 keV, enough for the difference to be observed by a high-resolution Cauchois transmission crystal spectrograph. When the PFRP's intense hard bremsstrahlung is suppressed by the proper shielding, such an instrument gives excellent fluorescence spectra, albeit with as yet insufficient resolution to see any effect of tungsten's ionization. Higher resolution is possible with various straightforward upgrades that are feasible thanks to the radiation's high intensity.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Limitation of the electron emission in an ion diode with magnetic self-insulation

The results of a study of the generation of a pulsed ion beam of gigawatt power formed by a diode with an explosive-emission potential electrode in a mode of magnetic self-insulation are presented. The studies were conducted at the TEMP-4M ion accelerator set in double pulse formation mode: the first pulse was negative (300-500 ns and 100-150 kV) and the second, positive (150 ns and 250-300 kV). The ion current density was 20-40 A/cm{sup 2}; the beam composition was protons and carbon ions. It was shown that plasma is effectively formed over the entire working surface of the graphite potential electrode. During the ion beam generation, a condition of magnetic cutoff of electrons along the entire length of the diode (B/B{sub cr}{>=} 4) is fulfilled. Because of the high drift rate, the residence time of the electrons and protons in the anode-cathode gap is 3-5 ns, while for the C{sup +} carbon ions, it is more than 8 ns. This denotes low efficiency of magnetic self-insulation in a diode of such a design. At the same time, it has been experimentally observed that, during the generation of ion current (second pulse), the electronic component of the total current is suppressed by a factor of 1.5-2 for a strip diode with plane and focusing geometry. A new model of the effect of limiting the electron emission explaining the decrease in the electronic component of the total current in a diode with magnetic self-insulation is proposed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A compact P-band coaxial relativistic backward wave oscillator with only three periods slow wave structure

A compact P-band coaxial relativistic backward wave oscillator (BWO) with only three periods slow wave structure (SWS) is investigated both theoretically and numerically. The characteristics of the coaxial SWS are analyzed when the SWS is changed from the structure with only outer conductor ripple to the structure with both inner and outer conductor ripples. It is found that the existence of the inner conductor ripple can reduce the period length of coaxial SWS to maintain the same operating frequency of the BWO and can largely increase the temporal growth rate and the spatial growth rate of the device. Then, the effects of SWS period numbers on the generation of the microwave in the P-band relativistic BWO are studied by PIC simulations. The results show that three periods SWS cannot only make the device more compact but also has a wide region of single-frequency operation and relatively large efficiency and output power in a wide range of the diode voltage. Typical simulation results show that, with a 585 kV and 7.85 kA electron beam guided by a 0.8 T solenoidal field, the microwave of 1.65 GW is generated at the frequency of 900 MHz, and the interaction efficiency is about 36%. Compared with the conventional P-band coaxial relativistic BWO with five periods SWS, the axial length of the SWS is reduced by about one half, which is only 38.4 cm, and the saturation time of the microwave signal is reduced by about 10 ns.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗