Search NASA⌕ Search

SEARCH · Search NASA

Results for “active source”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

The Jovian hydrogen bulge - Evidence for co-rotating magnetospheric convection

The Jovian hydrogen bulge is located 180 deg away in the System II longitude from the active sector identified as the source region for Jupiter's decametric radio emission and release of energetic electrons into interplanetary space. The sector results from the large magnetic anomaly in the Jovian northern hemisphere; it is expected that a two-cell magnetospheric convection pattern is found in the Jovian atmosphere. The magnetic anomaly of the active sector produces a convection which brings the magnetospheric plasma to the upper atmosphere at the longitudes below the hydrogen bulge; the hot plasma contains electrons with energies of about 100 keV which dissociate atmospheric molecules into atomic hydrogen creating longitudinal symmetry in hydrogen Lyman alpha emission.

Dessler, A. J.↗

Transparent Ceramic Garnet Gamma-Ray Spectrometer With Directionality

We have developed a handheld γ -ray spectrometer based on 1024 pixels, 2.8mm×2.8mm×6 mm in size, of gadolinium–yttrium–gallium–aluminum garnet (GYGAG) ((Gd,Y,Ce) 3 (Ga,Al) 5 O 12 ) ceramic scintillator (total of 48-cm 3 detector volume) coupled to silicon photodiode (SiPD) arrays. The SiPD arrays and readout ASIC, originally developed for medical imaging applications, have been adapted for portability in a lightweight box with heatsink and thermoelectric cooling. Custom readout firmware for γ-ray spectroscopy has been implemented, and a system user interface was developed that runs on an Android tablet. Here, we have optimized the processing of the GYGAG(Ce), the pixel optical coupling, and electronics readout parameters to obtain single pixel energy resolution as good as R(662keV)=3.1 % full-width at half-maximum and full device resolution with singles events from all pixels summed of 4.5%. When Compton-summed events are included, full-energy peak efficiency increases by ~2× , and R(662keV)=4.7 % is obtained for the full device. The pixelated architecture is leveraged to locate point sources of radiological materials using Compton imaging and active masking techniques. Directional detection of a 1 mCi Cs-137 source at 10 m can be made to ±10° in ~2 s.

42 ENGINEERING↗

Comparison of active regions on the nucleus of Comet Halley

The images of the nucleus of Comet Halley returned by the Giotto spacecraft reveal a number of active regions on the surface, one of which is near the expected location of the rotation axis. This feature is larger and brighter than other source regions, suggesting that the mechanism which drives this source is also different. At this active region near the rotation pole the Sun is circumpolar for a significant portion of the solar encounter. Continuous solar insolation causes heating of the nucleus to greater depths and results in the unique properties of this source region. For example, the dust scattering in the antisolar regions around the nucleus is less from the polar region than from the region at the sunward end of the nucleus, consistent with spotty ejection of dusty mantle from the sunward tip and widespread activity in the polar region.

Reitsema, H. J.↗

Diagnostics of a negative hydrogen ion source based on a planar-coil inductively-driven discharge

Recent activity on a volume-production negative-hydrogen-ion source with the design of a matrix of small-radius discharges inductively driven by a planar coil is reported. A single discharge of the matrix has been studied by employing probe-and laser-photodetachment diagnostics. The measurements have been carried out in the first - small-size - chamber of a two-chamber discharge vessel, with rf power introduced by a planar coil positioned on its front wall. The measured profiles of the negative ion density show strong axial dependence, with two maxima located at the positions corresponding to the maxima of the dc potential, where the maxima of the electron density are also located. The first maximum is in the vicinity of the rf power input and the second one is close to the interface between the two chambers of the discharge vessel.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Adaptative Site Management for a 115 Acre Chlorinated Solvent Plume with Two Separate Source Areas at Kennedy Space Center, Florida

Background/Objectives. During Resource Conservation and Recovery Act (RCRA) Facility Investigation (RFI) activities, Geosyntec delineated a chlorinated volatile organic compound (CVOC) plume at the National Aeronautics and Space Administration’s (NASA’s) Vehicle Assembly Building (VAB) area located at KSC, Florida. The RFI activities identified an approximate 115-acre dissolved plume (primarily vinyl chloride) and a trichloroethene (TCE) source area in an active aerospace complex that is surrounded by sensitive wetland/waterbodies. Due to the size of the impacted area, the Corrective Measure Design included a multi-component strategy: (i) address the source area via bioremediation; (ii) protect sensitive wetlands from impacted groundwater discharge via biosparging; and (iii) Long Term Monitoring (LTM) of the remaining dissolved plume. After the Corrective Measures implementation (CMI), NASA and Geosyntec worked with Florida Department of Environmental Protection (FDEP) to implement an adaptive site management for the complex, 115-acre site outside of the traditional RCRA process. The adaptive site management approach relied on performing supplemental assessments and implementing Interim Measures (IMs) to further assess and implement remedies over time while working within site and budget constraints, with an overall goal of achieving enough mass reduction to transition the entire site to LTM and eventually achieve site closure. Approach/Activities. After the biosparge barrier was operational and bioremediation within the source area (referred to as Hot Spot 1) achieved the Corrective Action Objective (CAO), supplemental assessment of the area between Hot Spot 1 and the biosparge barrier was performed. The conceptual site model was updated using the supplemental assessment results and an air sparge system IM was designed to treat an approximate 1.2 acre area (referred to as Hot Spot 2). After installation of the air sparge system, supplemental assessment within the remainder of the 115-acre dissolved plume was performed and a second TCE source area was identified. The TCE source area and associated areas with elevated CVOC concentrations (referred to as Hot Spot 3) were delineated and a bioremediation IM was implemented. Also, the downgradient impacts from Hot Spot 3 were adjacent to a sensitive waterbody, and negotiations with the FDEP allowed the area to be monitored using LTM. Results/Lessons Learned. The performance of supplemental assessment activities and implementation of remedial alternatives as IMs allowed NASA to successfully address groundwater impacts over time, while working within the FDEP regulatory framework. The implementation of the CMI and multiple IMs has achieved the following goals: (i) the biosparge barrier has mitigated the potential discharge of impacted groundwater to an adjacent wetland; (ii) enhanced bioremediation within Hot Spot 1 achieved the CAO within 2 years and transitioned the area into LTM; (iii) operation of an air sparge system within Hot Spot 2 removed TCE as a constituent of concern and contributed to a reduction (approximately 43%) in the impacted groundwater area outside the air sparge treatment area (plume collapse); and (iv) bioremediation within Hot Spot 3 removed approximately 80% of the CVOC mass and contributed to a reduction (approximately 47%) in the impacted groundwater area outside the bioremediation IM treatment area. Overall, the adaptive approach is protecting the sensitive water bodies surrounding the complex site and reducing the area of impacted groundwater, which is moving the entire site towards LTM.

Rebecca C Daprato↗

Potentially Habitable Ancient Environments in Gusev Crater, Mars

Habitable environments must sustain liquid water at least intermittently and also provide both chemical building blocks and useful sources of energy for life. Observations by Spirit rover indicate that conditions have probably been too dry to sustain life, at least since the emplacement of the extensive basalts that underlie the plains around the Columbia Memorial Station landing site. Local evidence of relatively minor aqueous alteration [1] probably occurred under conditions where the activity of water was too low to sustain biological processes as we know them. In contrast, multiple bedrock units in West Spur and Husband Hill in the Columbia Hills have been extensively altered. Patterns of elemental abundances are consistent with aqueous processes involving migrating fluids [2]. Fe in several of these units has been extensively oxidized [3]. Conceivably any microbiota present during the aqueous alteration of these rocks might have obtained energy from Fe oxidation. Spirit discovered olivine-rich ultramafic rocks during her descent from Husband Hill southward into Inner Basin. Alteration of similar ultramafic rocks on Earth can yield H2 that can provide both energy and reducing power for microorganisms. Spirit's discovery of deposits rich in ferric sulfate is consistent with the aqueous dissolution and/or alteration of olivine under acidic conditions [2] such as those associated with hydrothermal activity. The oxidation of iron and sulfur that can accompany such activity can be an energy source for life. Hydrothermal systems on Earth that sustain either acidic [4] or neutral to alkaline fluids [5] have been shown to provide this energy. Collectively the observations by Spirit rover are consistent with the possibility that habitable environments existed in Gusev crater at least intermittently in the distant geologic past.

Fe oxidation↗

Optimization, Scale-Up, and Design of Coal-Dependent Methanogenesis in Preparation for In Situ Field Demonstration (Final Report)

Coal deposits are a widespread energy resource on Earth, and the associated CBM represents a significant portion of the world’s natural gas reserves. In deep coal beds, CBM can be a by-product of coalification processes at elevated temperature and pressure and is referred to as thermogenic gas. In shallower coal seams, CBM formation is the result of microbial transformation of organic matter into methane gas (CH 4 ) via methanogenesis, involving the syntrophic cooperation of fermenting and acetogenic bacteria with methanogenic archaea. Biogenic gas, including microbial CBM, can contribute up to 20% of the gas resources on Earth. A large portion of coal deposits in the US (ca. 35%) reside in the PRB located in Montana and Wyoming which are the focus of the present study. The isotopic composition of dissolved gases ( 13 CH 4 and 13 CO 2 ) in the formation water of PRB coal beds is indicative of active methanogenesis as the dominant source of gas in the basin. These low-rank (subbituminous) coal beds provide higher proportions of bioavailable macerals that favor biogenic gas formation in the subsurface. Estimates for the microbial CBM produced from the PRB coal beds over the past decades, range from 15 to 30 trillion ft 3 recovered from over 17,000 active wells. While most of the coal in the PRB is unminable, CBM can be extracted and its combustion produces less atmospheric emissions of greenhouse gases than oil or coal.

Fields, Matthew↗

In-Situ-Reduced Synthesis of Ti 3+ Self-Doped TiO 2 /g-C 3 N 4 Heterojunctions with High Photocatalytic Performance under LED Light Irradiation

A simple one-step calcination route was used to prepare Ti3+ self-doped TiO2/g-C3N4 heterojunctions by mixture of H2Ti3O7 and melamine. X-ray diffraction (XRD), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), electron spin resonance (ESR) spectroscopy, and UV-Vis diffuse reflectance spectroscopy (UV-vis DRS) technologies were used to characterize the structure, crystallinity, morphology, and chemical state of the as-prepared samples. The absorption of the prepared Ti3+ self-doped TiO2/g-C3N4 heterojunctions shifted to a longer wavelength region in comparison with pristine TiO2 and g-C3N4. The photocatalytic activities of the heterojunctions were studied by degrading methylene blue under a 30 W visible-light-emitting diode irradiation source. The visible-light photocatalytic activities enhanced by the prepared Ti3+ self-doped TiO2/g-C3N4 heterojunctions were observed and proved to be better than that of pure TiO2 and g-C3N4. The photocatalysis mechanism was investigated and discussed. The intensive separation efficiency of photogenerated electron-hole in the prepared heterojunction was confirmed by photoluminescence (PL) spectra. The removal rate constant reached 0.038 min(-1) for the 22.3 wt % Ti3+ self-doped TiO2/g-C3N4 heterojunction, which was 26.76 and 7.6 times higher than that of pure TiO2 and g-C3N4, respectively. The established heterojunction between the interfaces of TiO2 nanoparticles and g-C3N4 nanosheets as well as introduced Ti3+ led to the rapid electron transfer rate and improved photoinduced electron-hole pair's separation efficiency, resulting in the improved photocatalytic performance of the Ti3+ self-doped TiO2/g-C3N4 heterojunctions.

LED light source↗

SPITZER- AND HERSCHEL-BASED SPECTRAL ENERGY DISTRIBUTIONS OF 24 {mu}m BRIGHT z {approx} 0.3-3.0 STARBURSTS AND OBSCURED QUASARS

In this paper, we characterize the infrared spectral energy distributions (SEDs) of mid-IR-selected z {approx} 0.3-3.0 and L{sub IR} {approx} 10{sup 11}-10{sup 13} L{sub Sun} galaxies, and study how their SEDs differ from those of local and high-z analogs. Infrared SEDs depend both on the power source (AGN or star formation) and the dust distribution. Therefore, differences in the SEDs of high-z and local galaxies provide clues as to differences in their physical conditions. Our mid-IR flux-limited sample of 191 sources is unique in size, and spectral coverage, including Spitzer mid-IR spectroscopy. Here, we add Herschel photometry at 250 {mu}m, 350 {mu}m, and 500 {mu}m, which allows us, through fitting an empirical SED model, to obtain accurate total IR luminosities, as well as constrain the relative contributions of AGNs and starbursts to those luminosities. Our sample includes three broad categories of SEDs: {approx}23% of the sources are AGNs (i.e., where the AGN contributes >50% of L{sub IR}), {approx}30% are starbursts where an AGN contributes <20% of L{sub IR}, and the mid-IR spectra are starburst-like (i.e., strong polycyclic aromatic hydrocarbon features); and the largest group ({approx}47%) are composites which show both significant AGN and starburst activity. The AGN-dominated sources divide into ones that show a strong silicate 9.7 {mu}m absorption feature, implying highly obscured systems, and ones that do not. The high-{tau}{sub 9.7} sources are half of our z > 1.2 AGNs, but show SEDs that are extremely rare among local AGNs. The 30% of the sample that are starbursts, even the z {approx} 2, L{sub IR} {approx} 10{sup 13} L{sub Sun} ones, have lower far-IR to mid-IR continuum ratios than local Ultra Luminous Infrared Galaxies (ULIRGs) or the z {approx} 2 sub-mm galaxies-effectively the SEDs of our z {approx} 2 starburst-dominated ULIRGs are much closer to those of local Luminous Infrared Galaxies than ULIRGs. This is consistent with our earlier finding that, unlike local ULIRGs, our high-z starbursts are typically only in the early stages of a merger. The SEDs of the composite sources are most similar to the local archetypal warm ULIRG, Mrk231, which supports the interpretation of their consisting of both AGN and starburst components. In summary, our results show that there is strong evolution in the SEDs between local and z {approx} 2 IR-luminous galaxies, as well as that there is a wide range of SEDs among high redshift IR-luminous sources. The publicly available SED templates we derive from our sample will be particularly useful for infrared population synthesis models, as well as in the interpretation of other mid-IR high-z galaxies, in particular those detected by the recent all sky Wide-field Infrared Survey Explorer.

79 ASTRONOMY AND ASTROPHYSICS↗

ATSA- A Cold, Active Telescope for Space Astronomy

The National Academies’ Decadal Survey telescope studies have produced mission design concepts that plotpathways into the future to follow on from Hubble, Spitzer, JWST and NGRST. Considering the results of theLUVOIR and HabEx studies in particular, it is clear that segmented mirrors will eventually be needed to providevery large apertures in space and that this architecture presents both a scientific opportunity and an engineeringchallenge. Furthermore, while HabEx and LUVOIR cover a great deal of spectrum, both fall short of the mid-IRregion where general astronomy and astrophysics can be undertaken that would be impossible from terrestrialobservatories and where there also exist spectral features of interest in the search for life. A telescope with similarcapabilities to Habex/LUVOIR but also capable of exoplanet work in spectral regions up to 5 µm would largelybridge the gap between those proposals and TPF-I (which would have operated from about 7 µm upwards), andis therefore worthy of study. The Active Telescope for Space Astronomy (ATSA) design study presents a possiblearchitecture and is moderately sized (6 m) to enable the use of both starshade and coronagraph technologies.While the segment gaps of a segmented primary mirror present a challenge for coronagraphy, the architecturedoes allow direct wavefront control at each segment of that mirror, enabling a great degree of control at theprimary source of contrast degradation. While active systems (for example, deformable mirrors on WFIRSTCGI) are being incorporated into telescope designs today, a fully active mirror system needs further developmentfor a future mission. With this concept in mind, and intending to build on the LUVOIR and HabEx studies, wediscuss the elements of a cooled telescope design enabling both general astrophysics and exoplanet studies fromthe near UV through to the near-IR.

Steeves, John↗

Relation between metric and decametric noise storm sources and microwave S-component emissions

Various activities are reported by taking into account the properties of the active region and its relationship to low frequency burst emissions observed by the IMP-6 satellite. The relation of metric noise continuum storms (200 MHz) with the S-component of microwave emissions (2800 MHz) are examined. Taking the results analyzed, a model on the growth of radio noise continuum sources in metric and decametric frequencies and its relation to microwave and other solar active phenomena are considered.

Sakurai, K.↗

Enhanced Cellulose Degradation Using Cellulase-Nanosphere Complexes

Enzyme catalyzed conversion of plant biomass to sugars is an inherently inefficient process, and one of the major factors limiting economical biofuel production. This is due to the physical barrier presented by polymers in plant cell walls, including semi-crystalline cellulose, to soluble enzyme accessibility. In contrast to the enzymes currently used in industry, bacterial cellulosomes organize cellulases and other proteins in a scaffold structure, and are highly efficient in degrading cellulose. To mimic this clustered assembly of enzymes, we conjugated cellulase obtained from Trichoderma viride to polystyrene nanospheres (cellulase:NS) and tested the hydrolytic activity of this complex on cellulose substrates from purified and natural sources. Cellulase:NS and free cellulase were equally active on soluble carboxymethyl cellulose (CMC); however, the complexed enzyme displayed a higher affinity in its action on microcrystalline cellulose. Similarly, we found that the cellulase:NS complex was more efficient in degrading natural cellulose structures in the thickened walls of cultured wood cells. These results suggest that nanoparticle-bound enzymes can improve catalytic efficiency on physically intractable substrates. We discuss the potential for further enhancement of cellulose degradation by physically clustering combinations of different glycosyl hydrolase enzymes, and applications for using cellulase:NS complexes in biofuel production.

59 BASIC BIOLOGICAL SCIENCES↗

Oscillatory Hierarchy Controlling Cortical Excitability and Stimulus Integration

Cortical gamma band oscillations have been recorded in sensory cortices of cats and monkeys, and are thought to aid in perceptual binding. Gamma activity has also been recorded in the rat hippocampus and entorhinal cortex, where it has been shown, that field gamma power is modulated at theta frequency. Since the power of gamma activity in the sensory cortices is not constant (gamma-bursts). we decided to examine the relationship between gamma power and the phase of low frequency oscillation in the auditory cortex of the awake macaque. Macaque monkeys were surgically prepared for chronic awake electrophysiological recording. During the time of the experiments. linear array multielectrodes were inserted in area AI to obtain laminar current source density (CSD) and multiunit activity profiles. Instantaneous theta and gamma power and phase was extracted by applying the Morlet wavelet transformation to the CSD. Gamma power was averaged for every 1 degree of low frequency oscillations to calculate power-phase relation. Both gamma and theta-delta power are largest in the supragranular layers. Power modulation of gamma activity is phase locked to spontaneous, as well as stimulus-related local theta and delta field oscillations. Our analysis also revealed that the power of theta oscillations is always largest at a certain phase of delta oscillation. Auditory stimuli produce evoked responses in the theta band (Le., there is pre- to post-stimulus addition of theta power), but there is also indication that stimuli may cause partial phase re-setting of spontaneous delta (and thus also theta and gamma) oscillations. We also show that spontaneous oscillations might play a role in the processing of incoming sensory signals by 'preparing' the cortex.

Shah, A. S.↗

Evaluating the purity of a {sup 57}Co flood source by PET

Purpose: Flood sources of {sup 57}Co are commonly used for quality control of gamma cameras. Flood uniformity may be affected by the contaminants {sup 56}Co and {sup 58}Co, which emit higher energy photons. Although vendors specify a maximum combined {sup 56}Co and {sup 58}Co activity, a convenient test for flood source purity that is feasible in a clinical environment would be desirable. Methods: Both {sup 56}Co and {sup 58}Co emit positrons with branching 19.6% and 14.9%, respectively. As is known from {sup 90}Y imaging, a positron emission tomography (PET) scanner is capable of quantitatively imaging very weak positron emission in a high single-photon background. To evaluate this approach, two {sup 57}Co flood sources were scanned with a clinical PET/CT multiple times over a period of months. The {sup 56}Co and {sup 58}Co activity was clearly visible in the reconstructed PET images. Total impurity activity was quantified from the PET images after background subtraction of prompt gamma coincidences. Results: Time-of-flight PET reconstruction was highly beneficial for accurate image quantification. Repeated measurements of the positron-emitting impurities showed excellent agreement with an exponential decay model. For both flood sources studied, the fit parameters indicated a zero intercept and a decay half-life consistent with a mixture of {sup 56}Co and {sup 58}Co. The total impurity activity at the reference date was estimated to be 0.06% and 0.07% for the two sources, which was consistent with the vendor’s specification of <0.12%. Conclusions: The robustness of the repeated measurements and a thorough analysis of the detector corrections and physics suggest that the accuracy is acceptable and that the technique is feasible. Further work is needed to validate the accuracy of this technique with a calibrated high resolution gamma spectrometer as a gold standard, which was not available for this study, and for other PET detector models.

07 ISOTOPE AND RADIATION SOURCES↗

The Effect of CO 2 on the Measurement of 220 Rn and 222 Rn with Instruments Utilising Electrostatic Precipitation

In some volcanic systems, thoron and radon activity and CO 2 flux, in soil and fumaroles, show a relationship between ( 220 Rn/ 222 Rn) and CO 2 efflux. It is theorized that deep, magmatic sources of gas are characterized by high 222 Rn activity and high CO 2 efflux, whereas shallow sources are indicated by high 220 Rn activity and relatively low CO 2 efflux. In this paper we evaluate whether the observed inverse relationship is a true geochemical signal, or potentially an analytical artifact of high CO 2 concentrations. We report results from a laboratory experiment using the RAD7 radon detector, known 222 Rn (radon) and 220 Rn (thorn), and a controllable percentage of CO 2 in the carrier gas. Our results show that for every percentage of CO 2 , the 220 Rn reading should be multiplied by 1.019, the 222 Rn radon should be multiplied by 1.003 and the 220 Rn/ 222 Rn ratio should be multiplied by 1.016 to correct for the presence of the CO 2 .

58 GEOSCIENCES↗

DECIPHERING CONTRIBUTIONS TO THE EXTRAGALACTIC GAMMA-RAY BACKGROUND FROM 2 GeV TO 2 TeV

Astrophysical sources outside the Milky Way, such as active galactic nuclei and star-forming galaxies, leave their imprint on the gamma-ray sky as nearly isotropic emission referred to as the extragalactic gamma-ray background (EGB). While the brightest of these sources may be individually resolved, their fainter counterparts contribute diffusely. In this work, we use a recently developed analysis method, called the Non-Poissonian Template Fit, on up to 93 months of publicly available data from the Fermi Large Area Telescope to determine the properties of the point sources (PSs) that comprise the EGB. This analysis takes advantage of photon-count statistics to probe the aggregate properties of these source populations below the sensitivity threshold of published catalogs. We measure the source-count distributions and PS intensities, as a function of energy, from ∼2 GeV to 2 TeV. We find that the EGB is dominated by PSs, likely blazars, in all seven energy sub-bins considered. These results have implications for the interpretation of IceCube’s PeV neutrinos, which may originate from sources that contribute to the non-blazar component of the EGB. Additionally, we comment on implications for future TeV observatories such as the Cherenkov Telescope Array. We provide sky maps showing locations most likely to contain these new sources at both low (≲50 GeV) and high (≳50 GeV) energies for use in future observations and cross-correlation studies.

79 ASTRONOMY AND ASTROPHYSICS↗

THE DUST TAIL OF ASTEROID (3200) PHAETHON

We report the discovery of a comet-like tail on asteroid (3200) Phaethon when imaged at optical wavelengths near perihelion. In both 2009 and 2012, the tail appears {approx}>350'' (2.5 Multiplication-Sign 10{sup 8} m) in length and extends approximately in the projected anti-solar direction. We interpret the tail as being caused by dust particles accelerated by solar radiation pressure. The sudden appearance and the morphology of the tail indicate that the dust particles are small, with an effective radius {approx}1 {mu}m and a combined mass {approx}3 Multiplication-Sign 10{sup 5} kg. These particles are likely products of thermal fracture and/or desiccation cracking under the very high surface temperatures ({approx}1000 K) experienced by Phaethon at perihelion. The existence of the tail confirms earlier inferences about activity in this body based on the detection of anomalous brightening. Phaethon, the presumed source of the Geminid meteoroids, is still active.

79 ASTRONOMY AND ASTROPHYSICS↗

Air-kerma strength determination of a new directional {sup 103}Pd source

Purpose: A new directional {sup 103}Pd planar source array called a CivaSheet™ has been developed by CivaTech Oncology, Inc., for potential use in low-dose-rate (LDR) brachytherapy treatments. The array consists of multiple individual polymer capsules called CivaDots, containing {sup 103}Pd and a gold shield that attenuates the radiation on one side, thus defining a hot and cold side. This novel source requires new methods to establish a source strength metric. The presence of gold material in such close proximity to the active {sup 103}Pd region causes the source spectrum to be significantly different than the energy spectra of seeds normally used in LDR brachytherapy treatments. In this investigation, the authors perform air-kerma strength (S{sub K}) measurements, develop new correction factors for these measurements based on an experimentally verified energy spectrum, and test the robustness of transferring S{sub K} to a well-type ionization chamber. Methods: S{sub K} measurements were performed with the variable-aperture free-air chamber (VAFAC) at the University of Wisconsin Medical Radiation Research Center. Subsequent measurements were then performed in a well-type ionization chamber. To realize the quantity S{sub K} from a directional source with gold material present, new methods and correction factors were considered. Updated correction factors were calculated using the MCNP 6 Monte Carlo code in order to determine S{sub K} with the presence of gold fluorescent energy lines. In addition to S{sub K} measurements, a low-energy high-purity germanium (HPGe) detector was used to experimentally verify the calculated spectrum, a sodium iodide (NaI) scintillating counter was used to verify the azimuthal and polar anisotropy, and a well-type ionization chamber was used to test the feasibility of disseminating S{sub K} values for a directional source within a cylindrically symmetric measurement volume. Results: The UW VAFAC was successfully used to measure the S{sub K} of four CivaDots with reproducibilities within 0.3%. Monte Carlo methods were used to calculate the UW VAFAC correction factors and the calculated spectrum emitted from a CivaDot was experimentally verified with HPGe detector measurements. The well-type ionization chamber showed minimal variation in response (<1.5%) as a function of source positioning angle, indicating that an American Association of Physicists in Medicine (AAPM) Accredited Dosimetry Calibration Laboratory calibrated well chamber would be a suitable device to transfer an S{sub K}-based calibration to a clinical user. S{sub K} per well-chamber ionization current ratios were consistent among the four dots measured. Additionally, the measurements and predictions of anisotropy show uniform emission within the solid angle of the VAFAC, which demonstrates the robustness of the S{sub K} measurement approach. Conclusions: This characterization of a new {sup 103}Pd directional brachytherapy source helps to establish calibration methods that could ultimately be used in the well-established AAPM Task Group 43 formalism. Monte Carlo methods accurately predict the changes in the energy spectrum caused by the fluorescent x-rays produced in the gold shield.

07 ISOTOPE AND RADIATION SOURCES↗