Search NASA⌕ Search

SEARCH · Search NASA

Results for “buffer layers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Phosphorus transformation response to soil properties changes induced by manure application in a calcareous soil

Management of phosphorus (P) loss in soils with heavy manure application requires improved understanding of the transformation characteristics of soil P. Influences of manure application on the forms and sorption-desorption characteristics of P in surface (0–30 cm) and subsurface (30–60 cm) layer of a calcareous soil were investigated in this paper in a six-year field trial in comparison to chemical fertilizer application. Hedley fractionation and P K-edge X-ray absorption near-edge structure spectroscopy were used to determine the soil P forms. Manure (M) and chemical fertilizer (F) treatments resulted in P accumulation in two soil depths, but the total P accumulation in surface soil with M treatment was significantly lower than F treatment with similar P surplus. Compared to control, M and F treatments were significantly increased the proportion of labile P at both depths. In surface soil, M treatment significantly decreased stable Ca-associated P proportion and increased Fe-associated P and inositol hexakisphosphate proportions. The accumulation and transformation of P in M treatment distinctly decreased P sorption maximun, sorption coefficient and buffer capacity, and increased the degree of P saturation and P desorption relative to F treatment. The soil properties of pH, organic carbon (OC), total nitrogen (TN), Mehlich-3 extractable Ca and Fe, and phytase in surface soil and pH, OC, TN, Mehlich-3 extractable Ca and dehydrogenase in subsurface soil had significant effects on the compositions of soil P (P < 0.05), respectively. Finally, lowered pH due to manure application mainly contributed to P transformation and release in the calcareous soil.

54 ENVIRONMENTAL SCIENCES↗

Synthesis of Hexagonal Boron Nitride Mono layer: Control of Nucleation and Crystal Morphology

Mono layer hexagonal boron nitride (hBN) attracts significant attention due to the potential to be used as a complementary two-dimensional dielectric in fabrication of functional 2D heterostructures. Here we investigate the growth stages of the hBN single crystals and show that hBN crystals change their shape from triangular to truncated triangular and further to hexagonal depending on copper substrate distance from the precursor. We suggest that the observed hBN crystal shape variation is affected by the ratio of boron to nitrogen active species concentrations on the copper surface inside the CVD reactor. Strong temperature dependence reveals the activation energies for the hBN nucleation process of similar to 5 eV and crystal growth of similar to 3.5 eV. We also show that the resulting h-BN film morphology is strongly affected by the heating method of borazane precursor and the buffer gas. Elucidation of these details facilitated synthesis of high quality large area monolayer hexagonal boron nitride by atmospheric pressure chemical vapor deposition on copper using borazane as a precursor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Embedding ceramic components in metal structures with hybrid directed energy deposition

The combined benefit of both additive and subtractive manufacturing within the same gantry system enables hybrid directed energy deposition to create complex geometries with smooth surface finish and superior dimensional accuracy. Moreover, with layer-by-layer access to the structure during both the addition and subtraction of material, the insertion of components is now possible, assuming the components can survive the high temperatures associated with the subsequent metal deposition. Ceramic inserts are of interest for a variety of reasons including (1) to create complex interwoven ductile/brittle composites for ballistics or high-temperature applications or (2) to integrate high-temperature strain or temperature sensors protected within ceramic substrate subsumed into a larger metal structure. Here, in this work, stainless steel substrates were machined to create an internal cavity for the insertion of a ceramic component. During the investigation of several different over-the-ceramic deposition strategies, components were inserted, and different process sequences were allowed to continue to envelop the inserted ceramic with varying success. Unmelted powder was used to serve both as a thermal buffer and to provide a flush surface upon which the laser cladding could continue. Subsequent depositions were attempted with both dry and wet powder (addition of machining coolant to wet). The wet powder has previously been demonstrated to not significantly impact the mechanical properties of a final structure and provided a thermal barrier to protect the ceramic piece from the extreme temperatures of the final metal deposition. The wetting of the powder provided stability and minimized displacement caused by the powder flow from the laser cladding head. Finally, the use of an oblique angle for laser cladding allowed for the redirection of some fraction of the introduced thermal energy away from the ceramic component and, consequently, improved the survival of the ceramic inserts. With this combination of techniques, ceramic inserts survived full embedding within a 3D-printed stainless steel structure.

36 MATERIALS SCIENCE↗

Guided Optimization of Phase-Unstable III–V Compositionally Graded Buffers by Cathodoluminescence Spectrum Imaging

Compositionally graded buffers (CGBs) are essential components of high-efficiency III-V inverted metamorphic solar cells, and high-quality CGBs with low defect densities are a requirement for high device efficiencies. Here, we use plan-view and cross-sectional cathodoluminescence spectrum imaging (CLSI) to investigate the effect of growth conditions on the microstructure of Al y Ga 1-x-y In x AS CGBs with x In > 0.30. CLSI reveals significant compositional fluctuation in these materials that correlates with the distribution of threading dislocations in the CGBs. Threading dislocations are observed to collect in regions between abrupt transitions in emission energy, implying that concomitant strain fluctuations in these regions restrict dislocation motion. Thus, the compositional fluctuation leads to elevated threading dislocation densities that degrade CGB quality. We also correlate compositional fluctuation in the CGB with compositional fluctuation in subsequently grown device layers. The effectiveness of specific growth conditions at suppressing compositional fluctuation and limiting threading dislocation density is evaluated. CGBs grown at high temperatures with high Al content exhibit the lowest defect densities. The use of a high V/III ratio suppresses compositional fluctuation and defect density. In conclusion, these insights lead directly to improvements in the efficiency of metamorphic Ga 1-x In x As solar cells grown on AlyGa 1-x-y In x As CGBs.

14 SOLAR ENERGY↗

Model of temperature, evaporation, and productivity in elevated experimental algae raceways and comparison with commercial raceways

Elevated Experimental Raceways (EERs) have been used at many research sites in the United States to evaluate algal biomass productivity. This paper develops temperature and evaporation models for EERs and then evaluates whether the temperature profile and resultant productivity in an EER is representative of large-scale commercial raceways. Open water surface evaporation and temperature models with shading algorithms were programmed in Python and calibrated with temperature and evaporation data from the EERs in the Regional Algal Feedstock Testbed (RAFT) experiments at the University of Arizona. The final calibrated model for EERs was named the EERTEM (Elevated Experimental Raceway Temperature and Evaporation Model). The energy balance algorithms in the Biomass Assessment Tool (BAT model) were also added to the Python code and used to develop temperature simulations of standard commercial paddlewheel raceways. A comparison of BAT and EERTEM simulations indicated that EER temperature fluctuations are not representative of in ground commercial paddlewheel raceways, primarily due to the buffering effect of soil heat flux in commercial raceways. With the different temperature profiles, biomass productivities of three algae species in the EERs were compared to productivities in commercial raceways. Differences in productivity between EERTEM and BAT model temperature profiles were observed when the maximum daytime temperature of one raceway was in the optimal growth range but the temperature of the other raceway exceeded or was below the optimal growth range.

Khawam, George↗

Growth mechanism of ZnO low-temperature homoepitaxy

The authors report on the growth mechanism of ZnO homoepitaxy at the low-temperature range of 500 deg. C, which is unavailable to obtain high-quality ZnO films in heteroepitaxy. One typical set of ZnO films were grown on (0001) ZnO substrates by molecular-beam epitaxy: a standard structure without buffer and two buffered structures with high-temperature (HT) homobuffer and low-temperature (LT) homobuffer. As a result, the LT homobuffered structure had the outstanding material properties: the surface roughness is 0.9 nm, the full width at half maximum of x-ray rocking curve is 13 arcsec, and the emission linewidth of donor-bound excitons is 2.4 meV. In terms of the theoretical interpretation of the experimentally obtained electron mobilities, it was found that the LT homobuffered structure suffers less from the dislocation scattering and the ionized-impurity scattering compared to the HT homobuffered structure. It is proposed that, in the ZnO low-temperature homoepitaxy, the LT homobuffer plays a key role in inducing the complete termination of dislocations in the homointerface and suppressing the outdiffusion of contaminants and point defects on the ZnO surface, which results in the formation of smooth wetting layer on the homointerface.

36 MATERIALS SCIENCE↗

Visible photoelectrochemical water splitting into H 2 and O 2 in a dye-sensitized photoelectrosynthesis cell

A hybrid strategy for solar water splitting is exploited here based on a dye-sensitized photoelectrosynthesis cell (DSPEC) with a mesoporous SnO 2 /TiO 2 core/shell nanostructured electrode derivatized with a surface-bound Ru(II) polypyridyl-based chromophore–catalyst assembly. The assembly, [(4,4’-(PO 3 H 2 ) 2 bpy) 2 Ru(4-Mebpy-4’-bimpy)Ru(tpy)(OH 2 )] 4+ ([RuaII-RubII-OH 2 ] 4+ , combines both a light absorber and a water oxidation catalyst in a single molecule. It was attached to the TiO 2 shell by phosphonate-surface oxide binding. The oxide-bound assembly was further stabilized on the surface by atomic layer deposition (ALD) of either Al 2 O 3 or TiO 2 overlayers. Illumination of the resulting fluorine-doped tin oxide (FTO)|SnO 2 /TiO 2 |-[Ru a II -Ru b II -OH 2 ] 4+ (Al 2 O 3 or TiO 2 ) photoanodes in photoelectrochemical cells with a Pt cathode and a small applied bias resulted in visible-light water splitting as shown by direct measurements of both evolved H 2 and O 2 . The performance of the resulting DSPECs varies with shell thickness and the nature and extent of the oxide overlayer. Use of the SnO 2 /TiO 2 core/shell compared with nanoITO/TiO 2 with the same assembly results in photocurrent enhancements of ~5. In conclusion, systematic variations in shell thickness and ALD overlayer lead to photocurrent densities as high as 1.97 mA/cm 2 with 445-nm, ~90-mW/cm 2 illumination in a phosphate buffer at pH 7.

36 MATERIALS SCIENCE↗

Final Closure of the Maxey Flats Low-Level Radioactive Waste Disposal Site - 16088

This paper describes the final closure remedy for the former Maxey Flats Low-Level Radioactive Waste Disposal Site (MFDS), the challenges presented at the site due to the condition of the disposal facility and waste, and their resolution through comprehensive geo-synthetic design. The MFDS is an inactive landfill located in Kentucky on a ridge surrounded by a buffer zone. Historically, waste disposal occurred without reducing voids or without compacting the placed waste. Settlement and water management issues led to releases of radioactive contamination into surrounding waters, resulting in the closure of the facility in 1977. The final closure remedy consists of 1) development and implementation oversight of a sump abandonment design to ensure no direct pathways for infiltrating water to contact the waste and 2) development and implementation oversight of the Final Closure Period (FCP) cap design. Challenges successfully addressed by the FCP scope included: Abandon sumps to minimize storm water migrating into the waste; Address potential existing groundwater waste interaction; Maximum use of on-site cap construction materials; Design cap to fit very restricted site footprint; Assess and address potential isolated differential settlement; Maximize passive storm water management; Provide alternative site access during construction. The FCP remedy and resultant design satisfies these challenges through use of layers of geo-grid-reinforced soil and geo-synthetic materials, contours and slopes that minimize the quantities of construction materials while maximizing the use of available material, probabilistic subsidence modeling, an integrated storm water management system ensuring the slow release of storm water into receiving streams, and a dedicated construction haul road system. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

High-efficiency single-junction p-i-n GaAs solar cell on roll-to-roll epi-ready flexible metal foils for low-cost photovoltaics

We demonstrate the fabrication and characterization of high-efficiency, single-junction p-i-n GaAs solar cells, on flexible metal foil with epi-ready buffer via roll-to-roll fabrication. Single-junction p-i-n GaAs solar cells were fabricated using metal–organic chemical vapor deposition (MOCVD). Furthermore, an efficiency greater than 13% was obtained at 1 sun, which is the highest reported efficiency on GaAs photovoltaics directly deposited on metal tapes. This exceeds our previously reported study showcasing 11.5% efficiency on single-junction p-n solar cell structure. Improved morphology of p-i-n structure compared with p-n is explained by atomic force microscopy (AFM), scanning electron microscopy (SEM), and helium ion microscopy (HIM) measurements. Time-of-flight secondary ion mass spectrometry (TOF-SIMS) analysis showed reduced Zn diffusion in p-i-n cell compared with the p-n cell. We attribute the improvement in efficiency of p-i-n cells on flexible metal tapes to the quality of the junction, surface morphology, controlled diffusion of species within the active layers, and increase in absorption due to the optimized intrinsic layer thickness.

14 SOLAR ENERGY↗

Fission product distribution in irradiated safety-tested and as-irradiated AGR-2 TRISO particles

In this work, two tristructural isotropic (TRISO)-coated nuclear fuel particles were examined by electron probe microanalysis (EPMA) as part of the Advanced Gas Reactor program. The compacts’ average irradiation temperatures ranged from approximately 1260 to 1290 °C. One particle was examined in the as-irradiated condition, while the other was subject to 1600 °C post-irradiation safety testing. This study was undertaken to test a newly-developed EPMA technique to determine fission product masses in TRISO particles on a layer-by-layer basis, and to compare fission product distributions between an as-irradiated and safety-tested particle. Fission product concentration profiles were collected along two radii in each particle, with measured concentrations used to compute the fission product mass in each TRISO particle layer. These measured masses were then compared to those predicted from ORIGEN modeling calculations. Data collected from these measurements show that for these two particles, masses determined via EPMA were within ± 20% of the calculated masses for the rare-earth elements, Mo, Zr, Cs, I, and Pd. Elements that tend to be less homogeneously distributed include Sr, Te, Eu, Ag, and possibly Ba. Measured Ag masses differed by more than 40% from the calculated mass. Lanthanides other than Eu remain primarily within the fuel kernel in the as-irradiated particle but in the safety-tested particle these element masses were divided approximately equally between the kernel and kernel periphery. In both particles, the majority of Sr and Eu accumulated in the carbon-rich kernel periphery, although in the safety-tested particle, Sr and Eu accumulated farther from the fuel kernel than occurred with irradiation alone. A greater mass fraction of mobile elements, such as Cs and I accumulated in the buffer and IPyC in the safety-tested particle as compared to the as-irradiated particle. When fully developed and tested, this mass balance approach to TRISO particle analysis has the potential to provide insight into fuel behavior.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

TCDD induces dermal accumulation of keratinocyte-derived matrix metalloproteinase-10 in an organotypic model of human skin

The epidermis of skin is the first line of defense against the environment. A three dimensional model of human skin was used to investigate tissue-specific phenotypes induced by the environmental contaminant, 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD). Continuous treatment of organotypic cultures of human keratinocytes with TCDD resulted in intracellular spaces between keratinocytes of the basal and immediately suprabasal layers as well as thinning of the basement membrane, in addition to the previously reported hyperkeratinization. These tissue remodeling events were preceded temporally by changes in expression of the extracellular matrix degrading enzyme, matrix metalloproteinase-10 (MMP-10). In organotypic cultures MMP-10 mRNA and protein were highly induced following TCDD treatment. Q-PCR and immunoblot results from TCDD-treated monolayer cultures, as well as indirect immunofluorescence and immunoblot analysis of TCDD-treated organotypic cultures, showed that MMP-10 was specifically contributed by the epidermal keratinocytes but not the dermal fibroblasts. Keratinocyte-derived MMP-10 protein accumulated over time in the dermal compartment of organotypic cultures. TCDD-induced epidermal phenotypes in organotypic cultures were attenuated by the keratinocyte-specific expression of tissue inhibitor of metalloproteinase-1, a known inhibitor of MMP-10. These studies suggest that MMP-10 and possibly other MMP-10-activated MMPs are responsible for the phenotypes exhibited in the basement membrane, the basal keratinocyte layer, and the cornified layer of TCDD-treated organotypic cultures. Our studies reveal a novel mechanism by which the epithelial–stromal microenvironment is altered in a tissue-specific manner thereby inducing structural and functional pathology in the interfollicular epidermis of human skin. - Highlights: • TCDD causes hyperkeratosis and basement membrane changes in a model of human skin. • TCDD induces MMP-10 expression in organotypic cultures of human keratinocytes. • Keratinocyte-expressed MMP-10 accumulates in the dermal compartment. • Keratinocyte K14 promoter-driven TIMP-1 expression ablates TCDD-induced phenotypes.

60 APPLIED LIFE SCIENCES↗

Determination of lattice parameters, strain state and composition in semipolar III-nitrides using high resolution X-ray diffraction

In group-III-nitride heterostructures with semipolar or nonpolar crystal orientation, anisotropic lattice and thermal mismatch with the buffer or substrate lead to a complex distortion of the unit cells, e.g., by shearing of the lattice. This makes an accurate determination of lattice parameters, composition, and strain state under assumption of the hexagonal symmetry impossible. In this work, we present a procedure to accurately determine the lattice constants, strain state, and composition of semipolar heterostructures using high resolution X-ray diffraction. An analysis of the unit cell distortion shows that four independent lattice parameters are sufficient to describe this distortion. Assuming only small deviations from an ideal hexagonal structure, a linear expression for the interplanar distances d{sub hkl} is derived. It is used to determine the lattice parameters from high resolution X-ray diffraction 2ϑ-ω-scans of multiple on- and off-axis reflections via a weighted least-square fit. The strain and composition of ternary alloys are then evaluated by transforming the elastic parameters (using Hooke's law) from the natural crystal-fixed coordinate system to a layer-based system, given by the in-plane directions and the growth direction. We illustrate our procedure taking an example of (112{sup ¯}2) Al{sub κ}Ga{sub 1−κ}N epilayers with Al-contents over the entire composition range. We separately identify the in-plane and out-of-plane strains and discuss origins for the observed anisotropy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Hydroforming of elliptical cavities

Activities of the past several years in developing the technique of forming seamless (weldless) cavity cells by hydroforming are summarized. An overview of the technique developed at DESY for the fabrication of single cells and multicells of the TESLA cavity shape is given and the major rf results are presented. The forming is performed by expanding a seamless tube with internal water pressure while simultaneously swaging it axially. Prior to the expansion the tube is necked at the iris area and at the ends. Tube radii and axial displacements are computer controlled during the forming process in accordance with results of finite element method simulations for necking and expansion using the experimentally obtained strain-stress relationship of tube material. In cooperation with industry different methods of niobium seamless tube production have been explored. The most appropriate and successful method is a combination of spinning or deep drawing with flow forming. Several single-cell niobium cavities of the 1.3 GHz TESLA shape were produced by hydroforming. They reached accelerating gradients E acc up to 35 MV/m after buffered chemical polishing (BCP) and up to 42 MV/m after electropolishing (EP). More recent work concentrated on fabrication and testing of multicell and nine-cell cavities. Several seamless two- and three-cell units were explored. Accelerating gradients E acc of 30–35 MV/m were measured after BCP and E acc up to 40 MV/m were reached after EP. Nine-cell niobium cavities combining three three-cell units were completed at the company E. Zanon. These cavities reached accelerating gradients of E acc = 30–35 MV/m. One cavity is successfully integrated in an XFEL cryomodule and is used in the operation of the FLASH linear accelerator at DESY. Additionally the fabrication of bimetallic single-cell and multicell NbCu cavities by hydroforming was successfully developed. Several NbCu clad single-cell and double-cell cavities of the TESLA shape have been fabricated. The clad seamless tubes were produced using hot bonding or explosive bonding and subsequent flow forming. The thicknesses of Nb and Cu layers in the tube wall are about 1 and 3 mm respectively. The rf performance of the best NbCu clad cavities is similar to that of bulk Nb cavities. The highest accelerating gradient achieved was 40 MV/m. The advantages and disadvantages of hydroformed cavities are discussed in this paper.

36 MATERIALS SCIENCE↗

Redeposition in plasma-assisted atomic layer deposition: Silicon nitride film quality ruled by the gas residence time

The requirements on the material properties and growth control of silicon nitride (SiN{sub x}) spacer films in transistors are becoming ever more stringent as scaling of transistor structures continues. One method to deposit high-quality films with excellent control is atomic layer deposition (ALD). However, depositing SiN{sub x} by ALD has turned out to be very challenging. In this work, it is shown that the plasma gas residence time τ is a key parameter for the deposition of SiN{sub x} by plasma-assisted ALD and that this parameter can be linked to a so-called “redeposition effect”. This previously ignored effect, which takes place during the plasma step, is the dissociation of reaction products in the plasma and the subsequent redeposition of reaction-product fragments on the surface. For SiN{sub x} ALD using SiH{sub 2}(NH{sup t}Bu){sub 2} as precursor and N{sub 2} plasma as reactant, the gas residence time τ was found to determine both SiN{sub x} film quality and the resulting growth per cycle. It is shown that redeposition can be minimized by using a short residence time resulting in high-quality films with a high wet-etch resistance (i.e., a wet-etch rate of 0.5 nm/min in buffered HF solution). Due to the fundamental nature of the redeposition effect, it is expected to play a role in many more plasma-assisted ALD processes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nonlinear Layer-by-Layer Films: Effects of Chain Diffusivity on Film Structure and Swelling

Here in this paper, we report on the role of molecular diffusivity in the formation of nonlinearly growing polyelectrolyte multilayers (nlPEMs). Electrostatically bound polyelectrolyte multilayers were assembled from poly(methacrylic acid) (PMAA) as a polyanion and quaternized poly(2-(dimethylamino)ethyl methacrylate) (QPC) as a polycation. Film growth as measured by ellipsometry was strongly dependent on the time allowed for each polymer deposition step, suggesting that the diffusivities of the components are crucial in controlling the rate of film growth. Uptake of polyelectrolytes within nlPEMs was relatively slow and occurred on time scales ranging from minutes to hours, depending on the film thickness. Spectroscopic ellipsometry measurements with nlPEM films exposed to aqueous solutions exhibited high (severalfold) degrees of film swelling and different swelling values for films exposed to QPC or PMAA solutions. FTIR spectroscopy showed that the average ionization of film-assembled PMAA increased upon binding of QPC and decreased upon binding of PMAA, in agreement with the charge regulation mechanism for weak polyelectrolytes. The use of neutron reflectometry (NR) enabled quantification of chain intermixing within the film, which was drastically enhanced when longer times were allowed for polyelectrolyte deposition. Diffusion coefficients of the polycation derived from the uptake rates of deuterated chains within hydrogenated films were of the order of 10 –14 cm 2 /s, i.e., 5–6 orders of magnitude smaller than those found for diffusion of free polymer chains in solution. Exchange of the polymer solutions to buffer inhibited film intermixing. Taken together, these results contribute to understanding the mechanism of the growth of nonlinear polyelectrolyte multilayers and demonstrate the possibility of controlling film intermixing, which is highly desirable for potential future applications.

36 MATERIALS SCIENCE↗

Effects of temperature and pH on the electrochemical behaviour of alloy 600 in simulated pressurized water reactor primary water

The effects of temperature and pH on the electrochemical properties of Alloy 600 were studied in oxygenated borate buffer solutions by the measurements of open circuit potential (OCP), anodic potentiostatic polarization, Mott-Schottky analysis (MSA), and electrochemical impedance spectroscopy (EIS). At each temperature and pH, the stabilized anodic passive current density was independent of the formation potential, and the slope of the M - S plot for the passive film formed at +0.3 V OCP (OCP + 0.3 V) is positive, indicating that the passive films formed on Alloy 600 have n-type semiconductor character. With increasing temperature (in each solution), the OCP and the impedance modulus decreased, while the passive current density and the defect density calculated from MSA increased, indicating a significant reduction in corrosion resistance. With the increase in pH value, the passive current density decreased, the absolute value of impedance increased slightly, revealing a slight increase in corrosion resistance. According to the optimization of Mixed Potential Model (MPM) on the experimentally measured EIS data for Alloy 600 at OCP and +0.3 V OCP , a series of fundamental parameters related to the micro-characteristic of passive film were extracted. In the barrier layer of the passive film, the concentration of cation interstitials is much higher than that of anion vacancies, indicating that the former was a dominant defect. With increasing temperature, the linear increase in the defect density and film thickness resulted in a linear increase of the anodic current density. However, with increasing pH, the decrease of defect density and the slight increase of film thickness caused a linear reduction in anodic current density. Elevated temperature has a more significant deterioration effect on the corrosion resistance of Alloy 600 than the increased pH value. Additionally, all the kinetics parameters describing the generation of cation interstitials and oxygen vacancies at the substrate/film were obtained.

36 MATERIALS SCIENCE↗

Optimization of viral resuspension methods for carbon-rich soils along a permafrost thaw gradient

Permafrost stores approximately 50% of global soil carbon (C) in a frozen form; it is thawing rapidly under climate change, and little is known about viral communities in these soils or their roles in C cycling. In permafrost soils, microorganisms contribute significantly to C cycling, and characterizing them has recently been shown to improve prediction of ecosystem function. In other ecosystems, viruses have broad ecosystem and community impacts ranging from host cell mortality and organic matter cycling to horizontal gene transfer and reprogramming of core microbial metabolisms. Here we developed an optimized protocol to extract viruses from three types of high organic-matter peatland soils across a permafrost thaw gradient (palsa, moss-dominated bog, and sedge-dominated fen). Three separate experiments were used to evaluate the impact of chemical buffers, physical dispersion, storage conditions, and concentration and purification methods on viral yields. The most successful protocol, amended potassium citrate buffer with bead-beating or vortexing and BSA, yielded on average as much as 2-fold more virus-like particles (VLPs) g –1 of soil than other methods tested. All method combinations yielded VLPs g –1 of soil on the 10 8 order of magnitude across all three soil types. The different storage and concentration methods did not yield significantly more VLPs g –1 of soil among the soil types. In conclusion, this research provides much-needed guidelines for resuspending viruses from soils, specifically carbon-rich soils, paving the way for incorporating viruses into soil ecology studies.

54 ENVIRONMENTAL SCIENCES↗

KBase Narrative - Porphyromonadaceae sp. W3.11 genome

Narratives for The phenotype and genotype of fermentative prokaryotes This is the Narrative for Porphyromonadaceae sp. W3.11. A complementary Narrative for Lachnospiraceae sp. C1.1 is available here. This is the Narrative for Lachnospiraceae sp. C1.1. A complementary Narrative for Porphyromonadaceae sp. W3.11 is available here. Background and Isolation This Narrative and its complementary Narrative contain assembly and annotation of two bacterial isolates that were isolated by our laboratory from the rumen of a Holstein heifer. All procedures with animals have been approved by University of California Davis’s Institutional Animal Care and Use Committee. Rumen contents were collected through a rumen fistula and strained through two layers of cheesecloth into a bottle. The bottle was sealed to exclude air and maintained at 39°C. Contents were brought to the laboratory and bubbled under O2-free CO2 within 15 min. At the laboratory, serial dilutions were made with anaerobic dilution solution for Lachnospiraceae sp. C1.1 and propionibacterium diluent for Porphyromonadaceae sp. W3.11 (table S2). Aliquots (0.1 ml) of each dilution were injected into anaerobic bottle plates (1) containing 9 ml of LH medium (table S2). After incubation at 37°C for 7 days, isolated colonies were picked. Lachnospiraceae sp. C1.1 was picked from a bottle inoculated with a 104 dilution of rumen contents, and Porphyromonadaceae sp. W3.11 was picked from a bottle inoculated with a 103 dilution. After initial isolation, these organisms were purified by growing on anaerobic roll tubes (2) and picking isolated colonies. We performed de novo sequencing of Lachnospiraceae sp. C1.1 and Porphyromonadaceae sp. W3.11. Aliquots of liquid culture (9 and 1.5 ml, respectively) were collected by syringe and centrifuged (21,000g for 10 min at 4°C). Cell pellets were submitted to Molecular Research LP for DNA extraction, library preparation, and sequencing. After resuspending pellets in 180 µl of ATL buffer (Qiagen), DNA was extracted using the MagAttract HMW DNA Kit (Qiagen). DNA was eluted in 100 µl of AE buffer (Qiagen) and then cleaned using the DNEasy PowerClean Pro Cleanup Kit (Qiagen). DNA was then sheared using the Covaris g-TUBE (Covaris). Sequencing libraries were prepared using the SMRTbell Express Template Prep Kit 2.0 (Pacific Biosciences) and 1500 ng of the sheared and purified DNA. The SMRTbell libraries were size-selected (>6 Kb) using a BluePippin instrument (Sage Science) and 0.75% agarose gel. Libraries were then sequenced using the PacBio Sequel II (Pacific Biosciences) platform and a 30-hour movie time. Narrative Summary In these Narratives, we filtered low-quality reads using Trimmomatic (v0.36), assembled filtered reads with SPAdes (v3.15.3), and then checked completeness and contamination of the assembled genomes with CheckM (v1.0.18). Statistics for sequencing and assembly are in table S3. Using the assembled contigs (genomes), we called genes and annotated them. Protein-coding genes were called using Prodigal (v2.6.3) (3) locally or using KBase via RASTtk (v1.073), with identical results. Genes were annotated with KO IDs using KAAS (4). They were further annotated with pfam and TIGRFAM IDs using KBase and the Annotate Domains in a Genome app. We classified putative genes for hydrogenases using HydDB. Genes for 16S ribosomal RNA (rRNA) were called using RASTtk (v1.073) in KBase. The contigs (genomes) were analyzed to determine whether they belonged to new species. Taxonomy was assigned using GTDB-Tk (v1.7.0) in KBase. The identity of 16S rRNA genes to other organisms was found using EzBioCloud (5). Values of digital DNA-DNA hybridization (dDDH) were found with Type (Strain) Genome Server (6). These analyses suggest that Lachnospiraceae sp. C1.1 and Porphyromonadaceae sp. W3.11 represent novel species or genera. GTDB-Tk assigned Lachnospiracae sp. C1.1 to family Lachnospiraceae and genus NK4A144, which contains no type strains. It assigned Porphyromonadaceae sp. W3.11 to Porphyromonadaceae and genus Porphyromonas_A. Values of 16S rRNA identity and dDDH with respect to type strains were low (table S4). Although more phenotypic data are needed, available evidence supports assignment of genomes to new species or genera. Related publication Hackmann TJ, Zhang B. The phenotype and genotype of fermentative prokaryotes. Sci Adv. 2023 Sep 29;9(39):eadg8687. doi: 10.1126/sciadv.adg8687. Epub 2023 Sep 27. PMID: 37756392; PMCID: PMC10530074.

Hackmann, Timothy↗