Search NASA⌕ Search

SEARCH · Search NASA

Results for “charge selectivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Cryo nanomanipulator probe with integrated gas injection

A probe assembly for use with a charged particle instrument includes an elongate body having a proximal end for positioning outside of a charged particle instrument enclosed environment, a distal end for positioning within the enclosed environment and a longitudinal axis. A port interface is located on the body between the proximal and distal ends, and is coupleable to a nanomanipulator system of the charged particle instrument. A probe needle is positioned at a distal end of the body and is selectively positionable from outside the enclosed environment to contact a specimen within the enclosed environment. At least one gas injection needle is adjustably positioned near the probe needle. The gas injection needle is connectable to a source of pressurized gas to selectively inject gas in the area of the probe needle within the enclosed environment.

Perea, Daniel E.↗

A Study of Fission Modes to Improve Nuclear Forensics

Obtain and evaluate charge and mass distributions from various databases and the literature Establish the mathematical formulism to decompose the selected mass distributions into their respective components of the multimodal fission models Compare and evaluate the results with prior work available from the literature Obtain, evaluate/validate experimentally-measured, photofission mass distributions using complementary INL-led research Apply decomposition methods to the photofission mass distributions Evaluate peak-to-valley ratios and specific isotopic ratios as a function of excitation energies Report and publish appropriate findings

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Detecting Neutrons in MicroBooNE

A significant challenge in measurements of neutrino oscillations is reconstructing the incoming neutrino energies. While modern fully-active tracking calorimeters such as liquid argon time projection chambers in principle allow the measurement of all final state particles above some detection threshold, undetected neutrons remain a considerable source of missing energy with little to no data constraining their production rates and kinematics. We present the first demonstration of tagging neutrino-induced neutrons in liquid argon time projection chambers using secondary protons emitted from neutron-argon interactions in the MicroBooNE detector. We describe the method developed to identify neutrino-induced neutrons and demonstrate its performance using neutrons produced in muon-neutrino charged current interactions. The method is validated using a small subset of MicroBooNE's total dataset. The selection yields a sample with $60\%$ of selected tracks corresponding to neutron-induced secondary protons.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

TH-CD-209-02: Beam Angle Optimization Incorporating Anatomical Heterogeneities for Pencil Beam Scanning Charged-Particle Therapy

Purpose: In charged particle therapy with pencil beam scanning (PBS), localization of the dose in the Bragg peak makes dose distributions sensitive to lateral tissue heterogeneities. Sensitivity of a PBS plan to lateral tissue heterogeneity can be reduced by selecting suitable beam angles. The purpose of this study is to establish a fast and accurate method of beam angle selection for PBS. Methods: The lateral tissue heterogeneity surrounding the path of respective pencil beams at a given angle was quantified with the heterogeneity number using effective density data of patients. To shorten the computation time, one dimensional dose calculation and optimization were conducted along the central axis of pencil beams originating from the scanning magnets. Calculation was performed for all fields with possible gantry and couch angles. The angles leading the minimum mean heterogeneity number was selected as the optimal beam angle. Three head and neck (H&N) cancer patients were used to evaluate our method. Dose distributions and their robustness to range and set up errors were evaluated for all tested angles, and their relation to their heterogeneity numbers were investigated. Results: Variety of heterogeneity number was clearly shown due to air cavities and bony structures in the patients. The mean value of heterogeneity number in all possible fields varied between 1.2 and 10.6 mm. By selecting a field with a lower mean value of heterogeneity number, target dose coverage and robustness of the fields were improved. Conclusion: We developed a computational method to determine a beam angle that leads good target coverage and robustness to setup errors. The developed stand-alone computation program is simple, fast, accurate and applicable for beam angle selection in PBS therapy.

60 APPLIED LIFE SCIENCES↗

Pseudocapacitance and excellent cyclability of 2,5-dimethoxy-1,4-benzoquinone on graphene

Electrochemically active organic materials are emerging as low cost, naturally abundant and sustainable alternatives to their metal-based counterparts. However, their usage in energy storage systems is mainly hindered by their poor conductivity, which results in capacitance fade upon cycling. In this paper, we present a redox-active xerogel composed of 2,5-dimethoxy-1,4-benzoquinone (DMQ) decorated on reduced graphene oxide (rGO) sheets via a hydrothermal method as a high capacitance and long cycle life pseudocapacitive electrode. DMQ not only provided stable redox-active centers but also served as a spacer to avoid rGO sheets aggregation and led to a three-dimensional (3D) hierarchical electrode architecture. When a binder-free 50 μm thick rolled film was tested as a pseudocapacitive electrode, it exhibited an excellent capacitance of 650 F g -1 at 5 mV s -1 (780 F cm -3 ) in 1 M sulfuric acid, outperforming a large number of reported organic and inorganic electrodes. Most importantly, optimized electrodes showed an excellent capacitance retention of 99% after 25 000 cycles at 50 mV s -1 . Density functional theory (DFT) calculations are further used to understand the charge storage mechanism, the preferred orientation of the adsorbed molecules, charge density distribution and density of states. In conclusion, our combined experimental and theoretical findings demonstrate that the careful selection of the conductive substrate, electrode architecture and organic molecules plays a crucial role in achieving high capacitance and long cycling performance.

25 ENERGY STORAGE↗

Search for the jet-induced diffusion wake in the quark-gluon plasma via measurements of jet-track correlations in photon-jet events in Pb+Pb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV with the ATLAS detector

This paper presents a measurement of jet-track correlations in photon-jet events, using 1.72 nb −1 of Pb+Pb data at $\sqrt{s_{NN}}$ = 5.02TeV recorded with the ATLAS detector at the LHC. Events with energetic photon-jet pairs are selected, where the photon and jet are approximately back-to-back in azimuth. The angular correlation between jets and charged-particle tracks with transverse momentum (𝑝 T ) in the range 0.5–2.0 GeV in the hemisphere opposite to the jet, |Δ⁢𝜙(jet,track)|>𝜋/2, is measured as a function of their relative pseudorapidity difference, |Δ⁢𝜂(jet,track)|. In central Pb+Pb collisions, these correlations are predicted to be sensitive to the diffusion wake in the quark-gluon plasma resulting from the lost energy of high-𝑝T partons traversing the plasma, with a characteristic modification as a function of |Δ⁢𝜂(jet,track)|. The correlations are examined with different selections on the jet-to-photon 𝑝 T ratio to select events with different degrees of energy loss. No diffusion wake signal is observed within the current sensitivity and upper limits at 95% confidence level on the diffusion wake amplitude are reported.

heavy flavor physics↗

Enhanced photocurrent gain and spectrum range based on the composite consisting of SnO{sub 2} nanowires and CdSe quantum dots

High sensitivity with additional spectral response based on the composite consisting of SnO{sub 2} nanowires (NWs) and CdSe quantum dots (QDs) has been demonstrated. The underlying mechanism is attributed to the spatial separation of photogenerated electrons and holes due to the charge transfer arising from type II band alignment between CdSe QD and SnO{sub 2} NW. This work shows that by selective decoration of suitable QDs, the photocurrent gain of NWs not only can be greatly enhanced, but also can be extended to a wider range photoresponse spectrum. Our result, therefore, provides a very useful guideline to create high efficiency photodetectors.

36 MATERIALS SCIENCE↗

Primary-Side Power Flow Control of Wireless Power Transfer for Electric Vehicle Charging

Various noncontacting methods of plug-in electric vehicle charging are either under development or now deployed as aftermarket options in the light-duty automotive market. Wireless power transfer (WPT) is now the accepted term for wireless charging and is used synonymously for inductive power transfer and magnetic resonance coupling. WPT technology is in its infancy; standardization is lacking, especially on interoperability, center frequency selection, magnetic fringe field suppression, and the methods employed for power flow regulation. This paper proposes a new analysis concept for power flow in WPT in which the primary provides frequency selection and the tuned secondary, with its resemblance to a power transmission network having a reactive power voltage control, is analyzed as a transmission network. Analysis is supported with experimental data taken from Oak Ridge National Laboratory s WPT apparatus. Lastly, this paper also provides an experimental evidence for frequency selection, fringe field assessment, and the need for low-latency communications in the feedback path.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Mass Spectrometry Adduct Calculator

We describe the Mass Spectrometry Adduct Calculator (MSAC), an automated Python tool to calculate the adduct ion masses of a parent molecule. Here, adduct refers to a version of a parent molecule [M] that is charged due to addition or loss of atoms and electrons resulting in a charged ion, e.g. [M+H] + . MSAC includes a database of 2,341 potential ions and their mass-to-charge ratios (m/z) as extracted from the NIST/EPA/NIH Mass Spectral Library (NIST17), the Global Natural Products Social Molecular Networking Public Spectral Libraries (GNPS), and MassBank of North America (MoNA). The calculator relies on user-selected subsets of the combined database to calculate expected m/z for adducts of molecules supplied as formulas This tool is intended to help researchers create identification libraries to collect evidence for the presence of molecules in mass spectrometry data. While the included adduct database focuses on adducts typically detected during liquid chromatography-mass spectrometry analyses, users may supply their own lists of adducts and charge states for calculating expected m/z. We also analyzed statistics on adducts from spectra contained in the three selected mass spectral libraries. MSAC is freely available at https://github.com/pnnl/MSAC.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rapid photooxidation and removal of As(III) from drinking water using Fe-Mn composite oxide

Fe-Mn composite oxide (FMO) is widely applied to the oxidation and removal of As(III) from water. However, As(III) can directly reduce manganese oxides, decreasing the oxidation capacity or reusability and thereby greatly limiting the applicability of FMO. Here, the oxidation capacity and reusability of FMO for As(III) were efficiently improved by light radiation, and the effect of typical coexisting ions (SO 4 2– and Ca 2+ ) on the removal of As(III) was also studied. O 2 •– produced from excited manganese oxide and ligand-to-metal charge transfer in iron oxide-As(III) complex enhanced As(III) oxidation and removal under light radiation. At an initial As(III) concentration of 1000 μg L –1 , the total As concentration was respectively decreased to 11.5, 1.5 and 4.4 μg L –1 under darkness, UV light and sunlight at 180 min, and could be reduced to below the guideline limitation of drinking water (10 μg L –1 ) within 40 and 60 min under UV light and sunlight, respectively. SO 4 2– exhibited negligible effect on As removal efficiency because FMO had obviously lower adsorption capacity and selectivity for SO 4 2– than for As(V). The adsorption of coexisting Ca 2+ on manganese oxide decreased the negative charge on the FMO surface, thereby improving As(III) adsorption and oxidation. FMO exhibited excellent reusability, and a total As removal efficiency of 99.1% was still maintained after five cycles of an adsorption-desorption process under UV light. Finally, this work elucidates the photochemical oxidation and removal mechanism of FMO for As(III), and proposes a low-cost and efficient method for the detoxification of As(III)-contaminated drinking water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Impact of heavy hole-light hole coupling on optical selection rules in GaAs quantum dots

We report strong heavy hole-light hole mixing in GaAs quantum dots grown by droplet epitaxy. Using the neutral and charged exciton emission as a monitor we observe the direct consequence of quantum dot symmetry reduction in this strain free system. By fitting the polar diagram of the emission with simple analytical expressions obtained from k{center_dot}p theory we are able to extract the mixing that arises from the heavy-light hole coupling due to the geometrical asymmetry of the quantum dot.

36 MATERIALS SCIENCE↗

Radiation Transport Properties of Potential In Situ-Developed Regolith-Epoxy Materials for Martian Habitats

Mission crews in space outside the Earth s magnetic field will be exposed to high energy heavy charged particles in the galactic cosmic radiation (GCR). These highly ionizing particles will be a source of radiation risk to crews on extended missions to the Moon and Mars, and the biological effects of and countermeasures to the GCR have to be investigated as part of the planning of exploration-class missions. While it is impractical to shield spacecraft and planetary habitats against the entire GCR spectrum, biological and physical studies indicate that relatively modest amounts of shielding are effective at reducing the radiation dose. However, nuclear fragmentation in the shielding materials produces highly penetrating secondary particles, which complicates the problem: in some cases, some shielding is worse than none at all. Therefore the radiation transport properties of potential shielding materials need to be carefully investigated. One intriguing option for a Mars mission is the use of material from the Martian surface, in combination with chemicals carried from Earth and/or fabricated from elements found in the Martian atmosphere, to construct crew habitats. We have measured the transmission properties of epoxy-Martian regolith composites with respect to heavy charged particles characteristic of the GCR ions which bombard the Martian surface. The composites were prepared at NASA Langley Research Center using simulated Martian regolith, in the process also evaluating fabrication methods which could lead to technologies for in situ fabrication on Mars. Initial evaluation of the radiation shielding properties is made using radiation transport models developed at NASA-LaRC, and the results of these calculations are used to select the composites with the most favorable radiation transmission properties. These candidates are then evaluated at particle accelerators which produce beams of heavy charged particles representative in energy and charge of the radiation at the surface of Mars. The ultimate objective is to develop the models into a design tool for use by mission planners, flight surgeons and radiation health specialists.

Miller, Jack↗

Highly active subnanometer Rh clusters derived from Rh-doped SrTiO 3 for CO 2 reduction

Here, sub-nanometer Rh clusters derived from Rh-doped SrTiO 3 , demonstrated by in-situ X-ray Diffraction (XRD) and X-ray Absorption Fine Structure (XAFS) measurements, are applied as highly active catalysts for CO 2 reduction. Compared to the supported Rh/SrTiO 3 , the catalyst synthesized by a doping-segregation method exhibits a higher space-time yield (STY) to CO with a selectivity of 95% for CO 2 reduction by hydrogen; it also shows a higher activity with a larger turnover frequency (TOF) for CO 2 reduction by ethane. According to the in-situ diffuse reflectance infrared Fourier transformed spectroscopy (DRIFTS) experiments, the higher CO selectivity for CO 2 hydrogenation is attributed to the lower CO binding strength resulted by the strong interactions (e.g., charge transfer) between Rh atoms and the oxide support with surface defects. The superior activity is suggested to be originated from the cooperative effect between the highly dispersed sub-nanometer Rh clusters for efficient dissociation of H 2 /C 2 H 6 and the reconstructed SrTiO 3 with oxygen vacancies for preferential adsorption/activation of CO 2 . Finally, the doping-segregation method provides a unique opportunity to tune the size of active metal clusters and the physicochemical properties of the oxide support, offering the potential for applications in a variety of chemical reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase Discovery and Selected Synthesis of Subvalent Niobium Tellurides Using a Polytelluride Flux Strategy

Transition metal subchalcogenides involve electron-rich metals and can facilitate an in-depth understanding of the relationships among quantum properties such as superconductivity, charge density wave, and topological band structures. However, effective experimental routes toward synthesizing transition metal subchalcogenides are still lacking, hindering the development of new quantum materials. Herein, we propose a eutectic polytelluride flux strategy as an excellent solution to address phase discovery and crystal growth in transition metal subtelluride systems. We report new phases easily and selectively synthesized using a eutectic “K 3 Te 4 ” polytelluride flux upon adjusting the ratio of Nb metal to flux in the starting materials (K/Nb/Te = 3:x:4). Using a high Nb content in the solvent (x = 2 and 1), crystals of KNb 3 Te 3 O 0.38 and K 0.9 Nb 3 Te 4 are obtained. Both subtellurides exhibit diverse Nb clusters, including face-sharing and edge-sharing Nb 6 octahedral columns and zig-zag Nb chains. Reducing the Nb content to x = 0.33 leads to the formation of a layered compound, K 1.06 NbTe 2 . This compound comprises a NbTe 6 trigonal prism with K intercalated between the layers. Single crystals of known binary Nb tellurides can also be grown using another eutectic flux “KTe 3 . 2 ”, and the obtained NbTe 2 exhibits a new polymorphism with extra trimerization along the b-axis in the Nb–Nb bonded double zig-zag cluster. Finally, precise control over the structural dimensionality and oxidation state, combined with the facile crystal growth process, makes our synthetic strategy an efficient route to explore quantum materials in transition metal subchalcogenides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Effect of Suprathermal Protons in the Heliosheath on the Global Structure of the Heliosphere and Heliotail

In the interaction between the solar wind (SW) and the local interstellar medium, various processes create ions with energies up to ~10 keV that are out of thermal equilibrium with the "core" population. Wave–particle interactions tend to isotropize the velocity distributions, but the collisionless nature of the SW precludes thermalization. Suprathermal protons can charge-exchange with interstellar hydrogen, producing energetic neutral atoms that are seen by the Interstellar Boundary EXplorer spacecraft. We have developed a model for the presence of several suprathermal populations in the SW downstream of the heliospheric termination shock. The model uses magnetohydrodynamics to satisfy the first three moments of the total ion distribution, and couples these through charge-exchange to neutral hydrogen, conserving mass, momentum, and energy in the combined system. The proton population is separated into a cool core and three suprathermal populations, and hydrogen atoms may charge-exchange with protons from any of those four populations. The phase-space properties of the pick-up ions are selected based on data and theoretical considerations. In this paper we quantify the impact of suprathermal protons on the global structure of the heliosphere by comparing our new model to a traditional Maxwellian fluid model, and a kappa-distribution model. We find that the differences in momentum and energy transfer rates from the protons onto neutral hydrogen between the models leads to different plasma properties in the heliotail, and also changes the size of the heliosphere. Including the energy-dependent charge-exchange cross section into the collision integrals reduces the magnitude of these differences.

79 ASTRONOMY AND ASTROPHYSICS↗

Search for pair production of first or second generation leptoquarks in proton-proton collisions at √s=7 TeV using the ATLAS detector at the LHC

This paper describes searches for the pair production of first or second generation scalar leptoquarks using 35 pb⁻¹ of proton-proton collision data recorded by the ATLAS detector at s√=7 TeV. Leptoquarks are searched in events with two oppositely-charged muons or electrons and at least two jets, and in events with one muon or electron, missing transverse momentum and at least two jets. After event selection, the observed yields are consistent with the predicted backgrounds. Leptoquark production is excluded at the 95% CL for masses M LQ <376 (319) GeV and M LQ <422 (362) GeV for first and second generation scalar leptoquarks, respectively, when assuming the branching fraction of a leptoquark to a charged lepton is equal to 1.0 (0.5).

Aad, G.↗

Amino acid and structural variability of Yersinia pestis LcrV protein

The LcrV protein is a multifunctional virulence factor and protective antigen of the plague bacterium which is generally conserved between the epidemic strains of Yersinia pestis. They investigated the diversity in the LcrV sequences among non-epidemic Y. pestis strains which have a limited virulence in selected animal models and for humans. Sequencing of lcrV genes from ten Y. pestis strains belonging to different phylogenetic groups (subspecies) showed that the LcrV proteins possess four major variable hotspots at positions 18, 72, 273, and 324-326. These major variations, together with other minor substitutions in amino acid sequences, allowed them to classify the LcrV alleles into five sequence types (A-E). They observed that the strains of different Y. pestis subspecies can have the same typ of LcrV, and different types of LcrV can exist within the same natural plague focus. The LcrV polymorphisms were structurally analyzed by comparing the modeled structures of LcrV from all available strains. All changes except one occurred either in flexible regions or on the surface of the protein, but local chemical properties (i.e. those of a hydrophobic, hydrophilic, amphipathic, or charged nature) were conserved across all of the strains. Polymorphisms in flexible and surface regions are likely subject to less selective pressure, and have a limited impact on the structure. In contrast, the substitution of tryptophan at position 113 with either glutamic acid or glycine likely has a serious influence on the regional structure of the protein, and these mutations might have an effect on the function of LcrV. The polymorphisms at positions 18, 72 and 273 were accountable for differences in oligomerization of LcrV. The importance of the latter property in emergence of epidemic strains of Y. pestis during evolution of this pathogen will need to be further investigated.

59 BASIC BIOLOGICAL SCIENCES↗