Search NASA⌕ Search

SEARCH · Search NASA

Results for “correlation selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Comparisons of rational engineering correlations of thermophoretically-augmented particle mass transfer with STAN5-predictions for developing boundary layers

Modification of the code STAN5 to properly include thermophoretic mass transport, and examination of selected test cases developing boundary layers which include variable properties, viscous dissipation, transition to turbulence and transpiration cooling. Under conditions representative of current and projected GT operation, local application of St(M)/St(M),o correlations evidently provides accurate and economical engineering design predictions, especially for suspended particles characterized by Schmidt numbers outside of the heavy vapor range.

Gokoglu, S. A.↗
DOE OSTI2015

Reference Correlation for the Viscosity of Ethane

A new representation of the viscosity for the fluid phase of ethane includes a zero-density correlation and a contribution for the critical enhancement, initially both developed separately, but based on experimental data. The higher-density contributions are correlated as a function of the reduced density δ = ρ/ρ{sub c} and of the reciprocal reduced temperature τ = T{sub c}/T (ρ{sub c}—critical density and T{sub c}—critical temperature). The final formulation contains 14 coefficients obtained using a state-of-the-art linear optimization algorithm. The evaluation and choice of the selected primary data sets is reviewed, in particular with respect to the assessment used in earlier viscosity correlations. The new viscosity surface correlation makes use of the reference equation of state for the thermodynamic properties of ethane by Bücker and Wagner [J. Phys. Chem. Ref. Data 35, 205 (2006)] and is valid in the fluid region from the melting line to temperatures of 675 K and pressures of 100 MPa. The viscosity in the limit of zero density is described with an expanded uncertainty of 0.5% (coverage factor k = 2) for temperatures 290 < T/K < 625, increasing to 1.0% at temperatures down to 212 K. The uncertainty of the correlated values is 1.5% in the range 290 < T/K < 430 at pressures up to 30 MPa on the basis of recent measurements judged to be very reliable as well as 4.0% and 6.0% in further regions. The uncertainty in the near-critical region (1.001 < 1/τ < 1.010 and 0.8 < δ < 1.2) increases with decreasing temperature up to 3.0% considering the available reliable data. Tables of the viscosity calculated from the correlation are listed in an appendix for the single-phase region, for the vapor–liquid phase boundary, and for the near-critical region.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

PCGF3 promotes the proliferation and migration of non-small cell lung cancer cells via the PI3K/AKT signaling pathway

Highlights: • PCGF3 is highly expressed in non-small cell lung cancer (NSCLC) tissues. • PCGF3 overexpression positively correlates with lymph node metastasis and p-TNM staging. • PCGF3 promotes NSCLC cells proliferation by regulating CyclinB1, CyclinD1, and CDK4. • PCGF3 promotes NSCLC cells migration by regulating RhoA, RhoC, and CDC42. • PCGF3 promotes malignant behavior in NSCLC by positively regulating the PI3K/AKT signaling pathway. The Polycomb Group Ring Finger 3 (PCGF3) protein has been reported to be significantly upregulated in pancreatic islet tumors and related to signal transduction; however, its detailed mechanisms and biological roles in other tumors, including non-small cell lung cancer (NSCLC), remain unclear. This study investigated the function of PCGF3 in NSCLC and further elucidated its mechanism of action. The immunohistochemical analysis of 86 selected lung cancer tissues revealed that PCGF3 was highly expressed in NSCLC tissues and positively correlated with lymph node metastasis and p-TNM staging. Additionally, PCGF3 promoted cell proliferation in lung cancer by regulating CyclinB1, CyclinD1, and CDK4 expression, and also promoting their migration by regulating RhoA, RhoC, and CDC42. Furthermore, PCGF3 affected both the proliferation and migration of lung cancer cells by regulating the PI3K/AKT pathway, as verified by inhibiting this pathway using LY294002. The findings of this study suggested that PCGF3 is associated with poor prognosis in patients with NSCLC and could therefore be an important biomarker for treating and preventing NSCLC.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

Ligand and Linkage Isomers of Bis(ethylthiocarbamato) Copper Complexes with Cyclic C 6 H 8 Backbone Substituents: Synthesis, Characterization, and Antiproliferation Activity

Abstract A series of isomeric bis(alkylthiocarbamate) copper complexes have been synthesized, characterized, and evaluated for antiproliferation activity. The complexes were derived from ligand isomers with 3‐methylpentyl (H 2 L 2 ) and cyclohexyl (H 2 L 3 ) backbone substituents, which each yield a pair of linkage isomers. The thermodynamic products CuL 2a/3a have two imino N and two S donors resulting in three five‐member chelate rings (555 isomers). The kinetic isomers CuL 2b/3b have one imino and one hydrazino N donor and two S donors resulting in four‐, six‐, and five‐member rings (465 isomers). The 555 isomers have more accessible Cu II/I potentials (E 1/2 =−811/−768 mV vs. ferrocenium/ferrocene) and lower energy charge transfer bands than their 465 counterparts (E 1/2 =−923/‐854 mV). Antiproliferation activities were evaluated against the lung adenocarcinoma cell line (A549) and nonmalignant lung fibroblast cell line (IMR‐90) using the MTT assay. CuL 2a was potent ( A549 EC 50 =0.080 μM) and selective ( IMR‐90 EC 50 / A549 EC 50 =25) for A549. Its linkage isomer CuL 2b had equivalent A549 activity, but lower selectivity ( IMR‐90 EC 50 / A549 EC 50 =12.5). The isomers CuL 3a and CuL 3b were less potent with A549 EC 50 values of 1.9 and 0.19 M and less selective with IMR‐90 EC 50 / A549 EC 50 ratios of 2.3 and 2.65, respectively. There was no correlation between reduction potential and A549 antiproliferation activity/selectivity.

Chemistry↗
NASA NTRS1994

A statistical analysis of the broadband 0.1 to 3.5 keV spectral properties of X-ray-selected active galactic nuclei

We survey the broadband spectral properties of approximately 500 X-ray-selected active galactic nuclei (AGNs) observed with the Einstein Observatory. Included in this survey are the approximately 450 AGNs in the Extended Medium Sensitivity Survey (EMSS) of Gioia et al. (1990) and the approximately 50 AGNs in the Ultrasoft Survey of Cordova et al. (1992). We present a revised version of the latter sample, based on the post publication discovery of a software error in the Einstein Rev-1b processing. We find that the mean spectral index of the AGNs between 0.1 and 0.6 keV is softer, and the distribution of indices wider, than previous estimates based on analyses of the X-ray spectra of optically selected AGNs. A subset of these AGNs exhibit flux variabiulity, some on timescales as short as 0.05 days. A correlation between radio and hard X-ray luminosity is confirmed, but the data do not support a correlation between the radio and soft X-ray luminosities, or between radio loudness and soft X-ray spectral slope. Evidence for physically distinct soft and hard X-ray components is found, along with the possibility of a bias in previous optically selected samples toward selection of AGNs with flatter X-ray spectra.

Thompson, R. J.↗
DOE OSTI2018

Selection of ν μ Events for the MicroBooNE Deep Learning Low Energy Excess Analysis

MicroBooNE is a large liquid argon time projection chamber (LArTPC) on Fermilab’s Booster Neutrino Beam (BNB). A main goal of MicroBooNE is to search for the low energy excess (LEE) of electron like events seen by MiniBooNE. Using ν μ interactions to constrain ν e systematics is a common approach in oscillation experiments, we will adopt it here as well. This takes adantage of the high statistics ν μ data and known correlations between electron and muon neutrino fluxes and cross sections. This note provides an overview of the selection of events with one reconstructed muon and one reconstructed proton in (µ1p) in MicroBooNE using a Deep Learning based reconstruction. We then present comparisons between data on our simulated neutrino interaction predictions for some important kinematic distributions. We find that in a sample of data corresponding to 4× 10 19 POT, that the data and simulation agree well in shape.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2019

New horizons in thermoelectric materials: Correlated electrons, organic transport, machine learning, and more

Thermoelectrics represent a unique opportunity in energy to directly convert thermal energy or secondary waste heat into a primary resource. The development of thermoelectric materials has improved over the decades in leaps, rather than by increments-each leap forward has recapitulated the science of its time: from the crystal growth of semiconductors, to controlled doping, to nanostructuring, and to 2D confinement. Each of those leaps forward was, arguably, more a result of materials science than physics. Thermoelectrics is now ripe for another leap forward, and many probable advances rely on new physics outside of the standard band transport model of thermoelectrics. This perspective will cover a limited selection of how thermoelectrics can benefit from new discoveries in physics: wave effects in phonon transport, correlated electron physics, and unconventional transport in organic materials. We also highlight recent developments in thermoelectrics discovery aided by machine learning that may be needed to realize some of these new concepts practically. Looking ahead, developing new thermoelectric physics will also have a concomitant domino effect on adjacent fields, furthering the understanding of nonequilibrium thermal and electronic transport in novel materials.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Ion exchange selectivity in clay is controlled by nanoscale chemical–mechanical coupling

Ion exchange in nanoporous clay-rich media plays an integral role in water, nutrient, and contaminant storage and transport. In montmorillonite (MMT), a common clay mineral in soils, sediments, and muds, the swelling and collapse of clay particles through the addition or removal of discrete molecular layers of water alters cation exchange selectivities in a poorly understood way. Here, we show that ion exchange is coupled to the dynamic delamination and restacking of clay layers, which creates a feedback between the hydration state of the exchanging cation and the composition of the clay interlayer. Particles with different hydration states are distinct phases with unique binding selectivities. Surprisingly, equilibrium achieved through thermal fluctuations in cation concentration and hydration state leads to the exchange of both ions and individual MMT layers between particles, a process we image directly with high-resolution transmission electron microscopy at cryogenic conditions (cryo-TEM). We introduce an exchange model that accounts for the binding selectivities of different phases, which is likely applicable to many charged colloidal or macromolecular systems in which the structural conformation is correlated with the activities of water and counterions within spatially confined compartments.

Whittaker, Michael L.↗
NASA NTRS2017

Using Dispersed Modes During Model Correlation

The model correlation process for the modal characteristics of a launch vehicle is well established. After a test, parameters within the nominal model are adjusted to reflect structural dynamics revealed during testing. However, a full model correlation process for a complex structure can take months of man-hours and many computational resources. If the analyst only has weeks, or even days, of time in which to correlate the nominal model to the experimental results, then the traditional correlation process is not suitable. This paper describes using model dispersions to assist the model correlation process and decrease the overall cost of the process. The process creates thousands of model dispersions from the nominal model prior to the test and then compares each of them to the test data. Using mode shape and frequency error metrics, one dispersion is selected as the best match to the test data. This dispersion is further improved by using a commercial model correlation software. In the three examples shown in this paper, this dispersion based model correlation process performs well when compared to models correlated using traditional techniques and saves time in the post-test analysis.

Stewart, Eric C.↗
DOE OSTI2018

Impact of petrophysical uncertainty on Bayesian hydrogeophysical inversion and model selection

Quantitative hydrogeophysical studies rely heavily on petrophysical relationships that link geophysical properties to hydrogeological properties and state variables. Coupled inversion studies are frequently based on the questionable assumption that these relationships are perfect (i.e., no scatter). Using synthetic examples and crosshole ground-penetrating radar (GPR) data from the South Oyster Bacterial Transport Site in Virginia, USA, we investigate the impact of spatially-correlated petrophysical uncertainty on inferred posterior porosity and hydraulic conductivity distributions and on Bayes factors used in Bayesian model selection. Our study shows that accounting for petrophysical uncertainty in the inversion (I) decreases bias of the inferred variance of hydrogeological subsurface properties, (II) provides more realistic uncertainty assessment and (III) reduces the overconfidence in the ability of geophysical data to falsify conceptual hydrogeological models.

58 GEOSCIENCES↗
DOE OSTI2016

A fundamental plane for long gamma-ray bursts with X-ray plateaus

A class of long gamma-ray bursts (GRBs) presenting light curves with an extended plateau phase in their X-ray afterglows obeys a correlation between the rest-frame end-time of the plateau, T {sub a}, and its corresponding X-ray luminosity, L {sub a}, (Dainotti et al). In this work we perform an analysis of a total sample of 176 Swift GRBs with known redshifts, exhibiting afterglow plateaus. By adding a third parameter that is the peak luminosity in the prompt emission, L {sub peak}, we discover the existence of a new three-parameter correlation. The scatter of data about this plane becomes smaller when a class-specific GRB sample is defined. This sample of 122 GRBs is selected from the total sample by excluding GRBs with associated supernovae (SNe), X-ray flashes and short GRBs with extended emission. With this sample the three-parameter correlation identifies a GRB “fundamental plane.” Moreover, we further limit our analysis to GRBs with light curves with good data coverage and almost flat plateaus, 40 GRBs forming our “gold sample.” The intrinsic scatter, σ{sub int}=0.27±0.04, for the three-parameter correlation for this last sub-class is more than two times smaller than the value for the L{sub a}−T{sub a} one, making this the tightest three-parameter correlation that involves the afterglow plateau phase. Finally, we also show that a slightly less tight correlation is present between L {sub peak} and a proxy for the total energy emitted during the plateau phase, L{sub a}T{sub a}, confirming the existence of an energy scaling between the prompt and afterglow phases.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1994

Fracture mechanics validity limits

Fracture behavior is characteristics of a dramatic loss of strength compared to elastic deformation behavior. Fracture parameters have been developed and exhibit a range within which each is valid for predicting growth. Each is limited by the assumptions made in its development: all are defined within a specific context. For example, the stress intensity parameters, K, and the crack driving force, G, are derived using an assumption of linear elasticity. To use K or G, the zone of plasticity must be small as compared to the physical dimensions of the object being loaded. This insures an elastic response, and in this context, K and G will work well. Rice's J-integral has been used beyond the limits imposed on K and G. J requires an assumption of nonlinear elasticity, which is not characteristic of real material behavior, but is thought to be a reasonable approximation if unloading is kept to a minimum. As well, the constraint cannot change dramatically (typically, the crack extension is limited to ten-percent of the initial remaining ligament length). Rice, et al investigated the properties required of J-type parameters, J(sub x), and showed that the time rate, dJ(sub x)/dt, must not be a function of the crack extension rate, da/dt. Ernst devised the modified-J parameter, J(sub M), that meets this criterion. J(sub M) correlates fracture data to much higher crack growth than does J. Ultimately, a limit of the validity of J(sub M) is anticipated, and this has been estimated to be at a crack extension of about 40-percent of the initial remaining ligament length. None of the various parameters can be expected to describe fracture in an environment of gross plasticity, in which case the process is better described by deformation parameters, e.g., stress and strain. In the current study, various schemes to identify the onset of the plasticity-dominated behavior, i.e., the end of fracture mechanics validity, are presented. Each validity limit parameter is developed in detail, and then data is presented and the various schemes for establishing a limit of the validity are compared. The selected limiting parameter is applied to a set of fracture data showing the improvement of correlation gained.

Lambert, Dennis M.↗
NASA NTRS1973

Correlation interferometric measurement of trace species in the atmosphere.

Two correlation interferometers, a breadboard model and an engineering model, have been designed, constructed, and tested for the measurement of selected atmospheric trace species. Test results showed that errors of less than 10% are attainable for atmospheric amounts of carbon monoxide and methane measured at 2.3 microns. Based on these results a program has been undertaken to determine the feasibility of measuring other trace species by correlation interferometry. It shown that in addition to carbon monoxide and methane, carbon dioxide, water vapor, ammonia, nitric oxide, nitrous oxide, nitrogen dioxide, and sulfur dioxide can also be accurately measured with this instrument.

Goldstein, H. W.↗
DOE OSTI2018

Role of heat treatment and build orientation in the microstructure sensitive deformation characteristics of IN718 produced via SLM additive manufacturing

The benefits of additive manufacturing have been well documented, but prior to these materials being used in critical applications, the deformation mechanisms must be properly characterized. In this work, the role of heat treatment and build orientation of selective laser melting IN718 is investigated through detailed characterization. The microstructure of this material is probed through a combination of electron microscopy to identify the precipitate structure, electron backscatter diffraction to quantify the grain-level features, and synchrotron-based X-ray microcomputed tomography to detect porosity. A high degree of porosity is observed spatially near the free surface of the part, where the contour during the build process meets the interior hatch. Further, microstructure based deformation mechanisms are explored through digital image correlation relative to the grain features after monotonic and cyclic loading and in situ high-energy X-ray diffraction to identify the lattice strain evolution in these materials. Demarcations between the behaviors of the as-built versus post-processed materials are discussed; specifically, in terms of anisotropy with respect to build direction and values of the strength properties, based on the grain morphology, coherent twin formation, and precipitate structure. In conclusion, the presence of dislocation sub-structures within the grains is observed to homogenize deformation within the as-built sample, while strain partitioning is observed during loading of the post-processed sample.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Perspective: Toward “synthesis by design”: Exploring atomic correlations during inorganic materials synthesis

Synthesis of inorganic extended solids is a critical starting point from which real-world functional materials and their consequent technologies originate. However, unlike the rich mechanistic foundation of organic synthesis, with its underlying rules of assembly (e.g., functional groups and their reactivities), the synthesis of inorganic materials lacks an underpinning of such robust organizing principles. In the latter case, any such rules must account for the diversity of chemical species and bonding motifs inherent to inorganic materials and the potential impact of mass transport on kinetics, among other considerations. Without such assembly rules, there is less understanding, less predictive power, and ultimately less control of properties. Despite such hurdles, developing a mechanistic understanding for synthesis of inorganic extended solids would dramatically impact the range of new material discoveries and resulting new functionalities, warranting a broad call to explore what is possible. Here we discuss our recent approaches toward a mechanistic framework for the synthesis of bulk inorganic extended solids, in which either embryonic atomic correlations or fully developed phases in solutions or melts can be identified and tracked during product selection and crystallization. The approach hinges on the application of high-energy x-rays, with their penetrating power and large Q-range, to explore reaction pathways in situ. We illustrate this process using two examples: directed assembly of Zr clusters in aqueous solution and total phase awareness during crystallization from K–Cu–S melts. These examples provide a glimpse of what we see as a larger vision, in which large scale simulations, data-driven science, and in situ studies of atomic correlations combine to accelerate materials discovery and synthesis, based on the assembly of well-defined, prenucleated atomic correlations.

36 MATERIALS SCIENCE↗
NASA NTRS1973

Multispectral signatures in relation to ground control signatures using nested sampling approach

The author has identified the following signficant results. An experiment was conducted to evaluate the feasibility of using ERTS-1 MSS imagery for spot transmission measurements on selected sites. Using the 15-unit gray scale on the 70 mm positive imagery as the base of comparison, a correlation was made between the transmittance measured at each site on the imagery and the radiance values (counts) recorded on CCT tape by the spacecraft over the same sites. The imagery was enlarged by a 750-watt projector and focused on a white cardboard screen 6 meters from the screen. Observations were made on 30 sub-sites which were pre-selected for their differing image brightness and total area; all are dried pond beds. Observations were also made on average gray backgrounds and a small lake. There was a very good correlation between the density values obtained from projected imagery and radiance values received by the detector on the spacecraft. A shorter experiment time and closer integration of gray scale and site readings would avoid the variation in lamp intensities that occurred.

Lyon, R. J. P.↗
DOE OSTI2023

Determining best practices for using genetic algorithms in molecular discovery

Genetic algorithms (GAs) are a powerful tool to search large chemical spaces for inverse molecular design. However, GAs have multiple hyperparameters that have not been thoroughly investigated for chemical space searches. In this tutorial, we examine the general effects of a number of hyperparameters, such as population size, elitism rate, selection method, mutation rate, and convergence criteria, on key GA performance metrics. Here, we show that using a self-termination method with a minimum Spearman’s rank correlation coefficient of 0.8 between generations maintained for 50 consecutive generations along with a population size of 32, a 50% elitism rate, three-way tournament selection, and a 40% mutation rate provides the best balance of finding the overall champion, maintaining good coverage of elite targets, and improving relative speedup for general use in molecular design GAs.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Hyper Suprime-Cam Year 3 results: Cosmology from galaxy clustering and weak lensing with HSC and SDSS using the minimal bias model

Here, we present cosmological parameter constraints from a blind joint analysis of three two-point correlation functions measured from the Year 3 Hyper Suprime-Cam (HSC-Y3) imaging data, covering about 416 deg 2 , and the SDSS DR11 spectroscopic galaxies spanning the redshift range [0.15, 0.70]. We subdivide the SDSS galaxies into three luminosity-cut, and therefore nearly volume-limited samples separated in redshift, each of which acts as a large-scale structure tracer characterized by the measurement of the projected correlation function, w p ⁡(R). We also use the measurements of the galaxy-galaxy weak-lensing signal Δ⁢Σ⁡(R) for each of these SDSS samples which act as lenses for a secure sample of source galaxies selected from the HSC-Y3 shape catalog based on their photometric redshifts. We combine these measurements with the cosmic shear correlation functions, ξ ± ⁡($\vartheta$) measured for our HSC source sample. We model these observables with the minimal bias model of the galaxy clustering observables in the context of a flat Λ⁢CDM cosmology. We use conservative scale cuts, R >12 and 8⁢ℎ -1 Mpc for Δ⁢Σ and w p , respectively, where the minimal bias model is valid, in addition to conservative prior on the residual bias in the mean redshift of the HSC photometric source galaxies. We present various validation tests of our model as well as analysis methods. Our baseline analysis yields S 8 = $0.77⁢5^{+0.043}_{-0.038}$ (68% C.I.) for the Λ⁢CDM model, after marginalizing over uncertainties in other parameters. Our value of S 8 is consistent with that from the Planck 2018 data, but the credible interval of our result is still relatively large. We show that various internal consistency tests based on different splits of the data are passed. Our results are statistically consistent with those of a companion paper, which extends this analysis to smaller scales with an emulator-based halo model, using Δ⁢Σ⁡(R) and w p ⁡(R) down to R >3 and 2⁢ℎ -1 Mpc, respectively.

79 ASTRONOMY AND ASTROPHYSICS↗