Iterative addition of parallel temperature effects to finite-difference simulation of radio-frequency wave propagation in plasmas
Explore the source record for details and available documents.
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
Geochemical hot moments are defined here as short periods of time that are associated with disproportionally high levels of concentrations (biogeochemically-driven or transport-related) relative to longer intervening time periods. We used entropy and wavelet techniques to identify temporal variability in geochemical constituents and their controls along three transects within a contaminated floodplain system near Rifle CO. Results indicated that transport-dominated hot moments drove overall geochemical processing in the contaminated groundwater and seep zones. These hot moments were associated with seasonal hydrologic variability (~4 months) in the contaminated aquifer and with annual hydrologic cycle and residence times in the seep zone. Hot moments associated with a naturally reduced zone within the aquifer were found to be biogeochemically-driven, with a different dominant frequency (~3 months) and no correlation to hydrologic or weather variations, in contrast to what is observed in other regions of the floodplain.
Here, the eccentric needle motion has been regarded as an important cause of in-nozzle flow disturbances and hole-to-hole spray variations of modern fuel injectors. However, the experimental investigations on this subject have rarely been reported due to great difficulties in the direct measurements of eccentric needle motion and the flow characteristics of individual holes in an injection nozzle. In this study, the axial and eccentric needle motion and the ear-nozzle spray dynamics of 3-hole, 5-hole and 8-hole diesel injection nozzles were investigated in varied injection pressure conditions using an xray phase-contrast imaging technique. The eccentric needle motion and near-nozzle spray axial velocity showed temporal oscillations during the injection with different oscillation frequencies. The frequencies of these two oscillations were independent to the nozzle and injection pressure. To discuss the mutual dependency of these two oscillations, the time traces of the spray axial velocity were measured for individual holes. The results showed that the oscillation phase, frequency and amplitude of the spray axial velocity were almost identical for all holes, which indicated that the sac pressure variation rather than hole-to-hole flow variation can be the primary cause of the spray axial velocity oscillation by the eccentric needle motion. The adequacy of this consideration was thoroughly discussed using a mass balance model in the nozzle sac that predicted the sac pressure variation during an injection event.
Underground caverns in a salt dome are promising geologic features to store hydrogen because of salt’s extremely low permeability and self-healing behavior. The salt cavern storage community, however, has not fully understood the geomechanical behaviors of salt rock driven by quick operation cycles of injection–production, which may significantly impact the cost-effective storage-recovery performance of multiple caverns. Our field-scale generic model captures the impact of cyclic loading–unloading on the salt creep behavior and deformation under different cycle frequencies, operating pressure, and spatial order of operating cavern(s). This systematic simulation study indicates that the initial operation cycle and arrangement of multiple caverns play a significant role in the creep-driven loss of cavern volumes and cavern deformation. Finally, our future study will develop a new salt constitutive model based on geomechanical tests of site-specific salt rock to probe the cyclic behaviors of salt precisely both beneath and above the dilatancy boundary, including reverse (inverse transient) creep, the Bauschinger effect, and damage-healing mechanism.
Purpose: The melanocortin-1 receptor (MC1R) regulates melanin biogenesis. Deoxyribonucleic acid sequence variants in the form of single nucleotide polymorphisms (SNPs) of MC1R affect melanin expression and are linked to skin phenotype. We aimed to determine whether SNPs of MC1R were associated with unexpectedly severe ionizing radiation reactions. Methods and Materials: The MC1R genotype of a cohort of Australians with unexpectedly severe acute and/or late reactions (Common Terminology Criteria Version 3 (CTCv3) Grade 3 or 4) to radiotherapy (RT) for cancer (n = 30) was analyzed. The findings were compared with control data from our previous study of MC1R representative of the general Australian population (n = 1,787). Results: The difference in frequency of alleles encoding a 'red hair color' phenotype in the cohort of patients with unexpectedly severe acute radiation reactions (n = 12) was significantly increased compared with the control population (p = 0.003). Acute radiosensitivity was especially associated with the R160W variant allele (odds ratio, 3.64 [95% confidence interval, 1.3-10.27]). The corresponding comparison of MC1R controls with unexpectedly severe late radiation reactions (n = 18) was not significant. It was also found that R160W as a part of the genotype in the patients with unexpectedly severe acute RT side effects as compared with the control group was also significant (p = 0.043). Conclusions: In this small cohort of cancer patients, deoxyribonucleic acid sequence variants of the MC1R gene, especially the R160W variant, have been associated with unexpectedly severe acute reactions to RT. This result needs to be verified in a larger cohort of patients.
Through introducing the alternating direction implicit (ADI) technique and the memory-optimized algorithm to the shift operator (SO) finite difference time domain (FDTD) method, the memory-optimized SO-ADI FDTD for nonmagnetized collisional plasma is proposed and the corresponding formulae of the proposed method for programming are deduced. In order to further the computational efficiency, the iteration method rather than Gauss elimination method is employed to solve the equation set in the derivation of the formulae. Complicated transformations and convolutions are avoided in the proposed method compared with the Z transforms (ZT) ADI FDTD method and the piecewise linear JE recursive convolution (PLJERC) ADI FDTD method. The numerical dispersion of the SO-ADI FDTD method with different plasma frequencies and electron collision frequencies is analyzed and the appropriate ratio of grid size to the minimum wavelength is given. The accuracy of the proposed method is validated by the reflection coefficient test on a nonmagnetized collisional plasma sheet. The testing results show that the proposed method is advantageous for improving computational efficiency and saving computer memory. The reflection coefficient of a perfect electric conductor (PEC) sheet covered by multilayer plasma and the RCS of the objects coated by plasma are calculated by the proposed method and the simulation results are analyzed.
The polyaniline (PAni)/Co{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} nanocomposite was prepared by an in situ polymerization in an aqueous solution. The products were characterized by Fourier transform infrared (FT-IR) spectrometer, ultraviolet-visible (UV-vis) spectrometer, X-ray diffraction (XRD) and transmission electron microscope (TEM). The average particle size of the PAni/Co{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} was estimated to be about 70 nm by TEM. The reflection loss (dB) of the nanocomposite was measured at different microwave frequencies in X-band (8.2-12.4 GHz), U-band (12.4-18 GHz) and K-band (18-26.5 GHz) by radar cross-section (RCS) method according to the national standard GJB-2038-94. The results showed the reflection loss of the PAni/Co{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} nanocomposite was higher than that of the PAni. The maximum reflection loss of the PAni/Co{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} nanocomposite was about -39.9 dB at 22.4 GHz with a bandwidth of 5 GHz (full frequency width at about a half of the peak response). In conclusion, this sample is a good microwave shielding and absorbing materials at higher frequency.
ZnO thin films were deposited on porous silicon by plasma-assisted molecular beam epitaxy using different radio frequency power settings. Optical emission spectrometry was applied to study the characteristics of the oxygen plasma, and the effects of the radio frequency power on the properties of the ZnO thin films were evaluated by X-ray diffraction, scanning electron microscopy, and photoluminescence. The grain sizes for radio frequency powers of 100, 200, and 300 W were 46, 48, and 62 nm, respectively. In addition, the photoluminescence intensities of the ultraviolet and the visible range increased at 300 W, because the density of the atomic oxygen transitions increased. The quality of the ZnO thin films was enhanced, but the deep-level emission peaks increased with increasing radio frequency power. The structural and optical properties of the ZnO thin films were improved at the radio frequency power of 300 W. Moreover, the optical properties of the ZnO thin films were improved with porous silicon, instead of Si.
Second harmonic generation using nonlinear ultrasonic waves have been shown to be an early indicator of possible fatigue damage in nuclear power plant components. This technique relies on measuring amplitudes, making it highly susceptible to variations in transducer coupling and instrumentation. This paper proposes an experimental procedure for in-situ surface wave nonlinear ultrasound measurements on specimen with permanently mounted transducers under high cycle fatigue loading without interrupting the experiment. It allows continuous monitoring and minimizes variation due to transducer coupling. Moreover, relations describing the effects of the measurement system nonlinearity including the effects of the material transfer function on the measured nonlinearity parameter are derived. An in-situ high cycle fatigue test was conducted using two 304 stainless steel specimens with two different excitation frequencies. A comprehensive analysis of the nonlinear sources, which result in variations in the measured nonlinearity parameters, was performed and the effects of the system nonlinearities are explained and identified. In both specimens, monotonic trend was observed in nonlinear parameter when the value of fundamental amplitude was not changing.
Not Available
A general procedure for predicting metal grid performance in solar cells was developed. Unlike transparent conducting oxides (TCOs) or other homogeneous films, metal grids induce more resistance in the neighbor layer. The resulting balance of transmittance, neighbor and grid resistance was explored in light of cheap lithography advances that have enabled metal nano-grid (MNG) fabrication. The patterned MNGs have junction resistances and degradation rates that are more favorable than solution-synthesized metal nanowires. Neighbor series resistance was simulated by the finite element method, although a simpler analytical model was sufficient in most cases. Finite-difference frequency-domain transmittance simulations were performed for MNGs with minimum wire width (w) of 50 nm, but deviations from aperture transmittance were small in magnitude. Depending on the process, MNGs can exhibit increased series resistance as w is decreased. However, numerous experimental reports have already achieved transmittance-MNG sheet resistance trade-offs comparable to TCOs. The transmittance, neighbor and MNG series resistances were used to parameterize a grid fill factor for a solar cell. In conclusion, this new figure of merit was used to demonstrate that although MNGs have only been employed in low efficiency solar cells, substantial gains in performance are predicted for decreased w in all high efficiency absorber technologies.
An environmental assessment of the management of organic household waste (OHW) was performed from a life cycle perspective by means of the waste-life cycle assessment (LCA) model EASEWASTE. The focus was on home composting of OHW in Denmark and six different home composting units (with different input and different mixing frequencies) were modelled. In addition, incineration and landfilling was modelled as alternatives to home composting. The most important processes contributing to the environmental impact of home composting were identified as greenhouse gas (GHG) emissions (load) and the avoided emissions in relation to the substitution of fertiliser and peat when compost was used in hobby gardening (saving). The replacement of fertiliser and peat was also identified as one of the most sensible parameters, which could potentially have a significant environmental benefit. Many of the impact categories (especially human toxicity via water (HTw) and soil (HTs)) were affected by the heavy metal contents of the incoming OHW. The concentrations of heavy metals in the compost were below the threshold values for compost used on land and were thus not considered to constitute a problem. The GHG emissions were, on the other hand, dependent on the management of the composting units. The frequently mixed composting units had the highest GHG emissions. The environmental profiles of the home composting scenarios were in the order of -2 to 16 milli person equivalents (mPE) Mg{sup -1} wet waste (ww) for the non-toxic categories and -0.9 to 28 mPE Mg{sup -1} ww for the toxic categories. Home composting performed better than or as good as incineration and landfilling in several of the potential impact categories. One exception was the global warming (GW) category, in which incineration performed better due to the substitution of heat and electricity based on fossil fuels.
Given the existential climate crisis faced by mankind and the world, the lifetime and sustainability of nuclear reactors as a carbon-free source of renewable energy depend on the susceptibility of their structural components to environmental degradation. In particular, critical components for light water reactors (LWRs) evolve over decades in service, losing ductility and toughness due to thermal and irradiation aging. Techniques to monitor their health cannot be easily applied in the field due to their destructive, expensive, or immobile nature. Thus, non-destructive evaluation (NDE) methods are sought to monitor and evaluate the health of major LWR components such as core barrels, steam generator tubes, or primary coolant pipes and are often required by policy, such as NRC policy #10-CFR-50.65. In this work we demonstrate the use of gigahertz, non-contact ultrasonics to gauge the state of cast austenitic stainless steels (CASS), used in some of the largest components in LWR primary systems. We do so by linking changes in their surface acoustic wave (SAW) characteristics using transient grating spectroscopy (TGS) to transmission electron microscopy (TEM)-verified evidence of spinodal decomposition and G-phase precipitation. In this thesis, thermal aging is shown to induce SAW peak splitting in spinodally decomposed CASS alloys, correlated strongly with lowered toughness and decreased ductility. Furthermore, statistical testing on the number of SAW peak splits observed show that the second SAW peak significantly appears more frequently and is significantly different in frequency in comparison to counts and frequencies measured in unaged specimens. The ability of this technique to non-destructively detect microstructural degradation at a distance in a predictive manner in the case of CASS motivates extending gigahertz ultrasonics to detect other LWR material degradation modes as an in-vessel inspection technique, such as reactor pressure vessel (RPV) embrittlement. This allows for the greater use of NDE techniques for confident monitoring of LWR structural material health to 80 years and beyond, saving costs by minimizing structural replacements until needed and maximizing energy production by preventing early decommission until necessary.
Due to the tremendous applications of the plasmon resonance excitation process, such as improvements in catalytic efficiency due to plasmonic enhancement and/or hot-electron processes, understanding the mechanism behind these processes has become a popular topic in recent years. In this work, we focus on unraveling the mechanism of excitation-induced H 2 activation using a simplified triangular Au 6 /Ag 6 cluster to investigate the effects of the electric field on electron redistribution and bond activation. We applied both static and continuous wave fields to investigate how these fields affect the systems. Geometrical changes (such as bond lengthening), molecular orbital reordering (affecting the relative energies of orbitals corresponding to hot-electron and charge-transfer excited states), and electronic charge redistribution between the cluster and the adsorbate occur upon application of a static electric field. To study H 2 activation, we apply Ehrenfest dynamics with real-time time-dependent density functional theory and examine how different excitation frequencies and polarizations affect bond activation. Moreover, electron-only dynamics are examined with real-time time-dependent density functional theory, and the time-dependent variations in the orbital populations and electronic transitions provide information about the excitation and relaxation processes of hot electrons with applied electric fields. Here, the static field results represent structures that can be accessed during the evolution of the systems when applying continuous wave fields. Through these studies, the effects of static and continuous wave field effects on plasmon-induced H 2 activation can be understood.
The self-assembly of two sizes of spherical nanocrystals has revealed a surprisingly diverse library of structures. To date, at least 15 distinct binary nanocrystal superlattice (BNSL) structures have been identified. The stability of these binary phases cannot be fully explained using the traditional conceptual framework treating the assembly process as entropy-driven crystallization of rigid spherical particles. Such deviation from hard sphere behavior may be explained by the soft and deformable layer of ligands that envelops the nanocrystals, which contributes significantly to the overall size and shape of assembling particles. In this work, we describe a set of experiments designed to elucidate the role of the ligand corona in shaping the thermodynamics and kinetics of BNSL assembly. Using hydrocarbon-capped Au and PbS nanocrystals as a model binary system, we systematically tuned the core radius ( R ) and ligand chain length ( L ) of particles and subsequently assembled them into binary superlattices. The resulting database of binary structures enabled a detailed analysis of the role of effective nanocrystal size ratio, as well as softness expressed as L/R , in directing the assembly of binary structures. This catalog of superlattices allowed us to not only study the frequency of different phases but to also systematically measure the geometric parameters of the BNSLs. Furthermore, this analysis allowed us to evaluate new theoretical models treating the cocrystallization of deformable spheres and to formulate new hypotheses about the factors affecting the nucleation and growth of the binary superlattices. Among other insights, our results suggest that the relative abundance of the binary phases observed may be explained not only by considerations of thermodynamic stability, but also by a postulated preordering of the binary fluid into local structures with icosahedral or polytetrahedral symmetry prior to nucleation.
Because microbial plankton in the ocean comprise diverse bacteria, algae, and protists that are subject to environmental forcing on multiple spatial and temporal scales, a fundamental open question is to what extent these organisms form ecologically cohesive communities. Here we show that although all taxa undergo large, near daily fluctuations in abundance, microbial plankton are organized into clearly defined communities whose turnover is rapid and sharp. We analyze a time series of 93 consecutive days of coastal plankton using a technique that allows inference of communities as modular units of interacting taxa by determining positive and negative correlations at different temporal frequencies. This approach shows both coordinated population expansions that demarcate community boundaries and high frequency of positive and negative associations among populations within communities. Our analysis thus highlights that the environmental variability of the coastal ocean is mirrored in sharp transitions of defined but ephemeral communities of organisms.
Surface states generally degrade semiconductor device performance by raising the charge injection barrier height, introducing localized trap states, inducing surface leakage current, and altering the electric potential. We show that the giant built-in electric field created by the surface states can be harnessed to enable passive wavelength conversion without utilizing any nonlinear optical phenomena. Photo-excited surface plasmons are coupled to the surface states to generate an electron gas, which is routed to a nanoantenna array through the giant electric field created by the surface states. The induced current on the nanoantennas, which contains mixing product of different optical frequency components, generates radiation at the beat frequencies of the incident photons. We utilize the functionalities of plasmon-coupled surface states to demonstrate passive wavelength conversion of nanojoule optical pulses at a 1550 nm center wavelength to terahertz regime with efficiencies that exceed nonlinear optical methods by 4-orders of magnitude.
Optical analogues to black holes allow the investigation of general relativity in a laboratory setting. Previous works have considered analogues to Schwarzschild black holes in an isotropic coordinate system; the major drawback is that required material properties diverge at the horizon. We present the dielectric permittivity and permeability tensors that exactly reproduce the equatorial Kerr–Newman metric, as well as the gradient-index material that reproduces equatorial Kerr–Newman null geodesics. Importantly, the radial profile of the scalar refractive index is finite along all trajectories except at the point of rotation reversal for counter-rotating geodesics. Construction of these analogues is feasible with available ordinary materials. A finite-difference frequency-domain solver of Maxwell’s equations is used to simulate light trajectories around a variety of Kerr–Newman black holes. For reasonably sized experimental systems, ray tracing confirms that null geodesics can be well-approximated in the lab, even when allowing for imperfect construction and experimental error.