Search NASA⌕ Search

SEARCH · Search NASA

Results for “force method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Syringe and Needle Size, Syringe Type, Vacuum Generation, and Needle Control in Aspiration Procedures

Purpose: Syringes are used for diagnostic fluid aspiration and fine-needle aspiration biopsy in interventional procedures. We determined the benefits, disadvantages, and patient safety implications of syringe and needle size on vacuum generation, hand force requirements, biopsy/fluid yield, and needle control during aspiration procedures. Materials and Methods: Different sizes (1, 3, 5, 10, and 20 ml) of the conventional syringe and aspirating mechanical safety syringe, the reciprocating procedure device, were studied. Twenty operators performed aspiration procedures with the following outcomes measured: (1) vacuum (torr), (2) time to vacuum (s), (3) hand force to generate vacuum (torr-cm{sup 2}), (4) operator difficulty during aspiration, (5) biopsy yield (mg), and (6) operator control of the needle tip position (mm). Results: Vacuum increased tissue biopsy yield at all needle diameters (P < 0.002). Twenty-milliliter syringes achieved a vacuum of -517 torr but required far more strength to aspirate, and resulted in significant loss of needle control (P < 0.002). The 10-ml syringe generated only 15% less vacuum (-435 torr) than the 20-ml device and required much less hand strength. The mechanical syringe generated identical vacuum at all syringe sizes with less hand force (P < 0.002) and provided significantly enhanced needle control (P < 0.002). Conclusions: To optimize patient safety and control of the needle, and to maximize fluid and tissue yield during aspiration procedures, a two-handed technique and the smallest syringe size adequate for the procedure should be used. If precise needle control or one-handed operation is required, a mechanical safety syringe should be considered.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Experimental characterization and modeling of optical tweezer particle handling dynamics [Modeling and Simulation of Optical Tweezer Particle Handling Dynamics]

Here, we report a new framework for a quantitative understanding of optical trapping (OT) particle handling dynamics. We present a novel three-dimensional particle-based model that includes optical, hydrodynamic, and inter-particle forces. This semi-empirical colloid model is based on an open-source simulation code known as LAMMPS (large-scale atomic/molecular massively parallel simulator) and properly recapitulates the full OT force profile beyond the typical linear approximations valid near the trap center. Simulations are carried out with typical system parameters relevant for our experimental holographic optical trapping (HOT) system, including varied particle sizes, trap movement speeds, and beam powers. Furthermore, we present a new experimental method for measuring both the stable and metastable boundaries of the optical force profile to inform or validate the model’s underlying force profile. We show that our framework is a powerful tool for accurately predicting particle behavior in a practical experimental OT setup and can be used to characterize and predict particle handling dynamics within any arbitrary OT force profile.

36 MATERIALS SCIENCE↗

Large-eddy simulation, fuel rod vibration and grid-to-rod fretting in pressurized water reactors

Grid-to-rod fretting (GTRF) in pressurized water reactors is a flow-induced vibration phenomenon that results in wear and fretting of the cladding material on fuel rods. GTRF is responsible for over 70% of the fuel failures in pressurized water reactors in the United States. Predicting the GTRF wear and concomitant interval between failures is important because of the large costs associated with reactor shutdown and replacement of fuel rod assemblies. The GTRF-induced wear process involves turbulent flow, mechanical vibration, tribology, and time-varying irradiated material properties in complex fuel assembly geometries. This paper presents a new approach for predicting GTRF induced fuel rod wear that uses high-resolution implicit large-eddy simulation to drive nonlinear transient dynamics computations. The GTRF fluid–structure problem is separated into the simulation of the turbulent flow field in the complex-geometry fuel-rod bundles using implicit large-eddy simulation, the calculation of statistics of the resulting fluctuating structural forces, and the nonlinear transient dynamics analysis of the fuel rod. Ultimately, the methods developed here, can be used, in conjunction with operational management, to improve reactor core designs in which fuel rod failures are minimized or potentially eliminated. Furthermore, robustness of the behavior of both the structural forces computed from the turbulent flow simulations and the results from the transient dynamics analyses highlight the progress made towards achieving a predictive simulation capability for the GTRF problem.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Obtaining the solid-liquid interfacial free energy via multi-scheme thermodynamic integration: Ag-ethylene glycol interfaces

The solid-liquid interfacial free energy γ sl is an important quantity in wetting, nucleation, and crystal growth. Although various methods have been developed to calculate γ sl with atomic-scale simulations, such calculations still remain challenging for multi-component interfaces between molecular fluids and solids. In this paper, we present a multi-scheme thermodynamic integration method that is inspired by the “cleaving-wall” method and aimed at obtaining γ sl for such systems using open-source simulation packages. This method advances two aspects of its predecessor methods. First, we incorporate separate schemes to resolve difficulties when manipulating periodic boundary conditions of the supercell using open-source simulation packages. Second, we introduce a numerical approximation to obtain thermodynamic integrands for complex force fields when an analytical differentiation is not readily available. To demonstrate this method, we obtain γ sl for interfaces between Ag(100) and Ag(111) and ethylene glycol (EG). These interfacial free energies mirror interfacial potential energies for each facet. We also estimate entropies of interface formation and these are consistent with theoretical predictions in signs and trends. For the Ag-EG systems, we find that the largest contribution to γ sl is the free energy to create the bare metal surfaces. The second-largest contribution to γ sl is from the liquid-solid interaction. Finally, this user-friendly method will accelerate investigation in a broad range of research topics, such as the thermodynamic effect of structure-directing agents in solution-phase shape-controlled nanocrystal syntheses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pore‐Scale Modeling of Carbon Dioxide and Hydrogen Transport During Geologic Gas Storage

Abstract Geologic storage of CO 2 and H 2 are climate‐positive techniques for meeting the energy transition. While similar formations could be considered for both gases, the flow dynamics could differ due to differences in their thermophysical properties. We conduct a rigorous pore‐scale study of water/CO 2 and water/H 2 systems at relevant reservoir conditions in a Bentheimer rock sample using the lattice Boltzmann method to quantify the effects of capillary, viscous, inertial, and wetting forces during gas invasion. At similar conditions, H 2 invasion is weaker compared to CO 2 due to unfavorable viscosity ratios. Increasing flow rate, however, increases the breakthrough saturation for both gas systems in the range of capillary numbers studied. At isolated conditions of flow rate, viscosity ratio, and wettability, local inertial effects are found to be critical and show consistent increase in the invaded gas saturation. The effect of inertial forces persits for both gases across all field conditions tested.

58 GEOSCIENCES↗

Alternating Conditional Expectations: Introducing a Non‐Parametric Statistical Method to Interpret Long‐Term Greenhouse Gas Flux Measurements Over Semi‐Arid and Wetland Ecosystems

Abstract We explore the potential of using a non‐parametric statistical method called Alternating Conditional Expectations, ACE, to quantify functional relationships in biogeosciences. Here, ACE is used to quantify the non‐linear and multi‐faceted responses of greenhouse gas fluxes to a set of biophysical forcings, when the shapes of those response surfaces are unknown. We evaluated the statistical method over two contrasting ecosystems and two contrasting time steps. One case involved quantifying the biophysical controls of water vapor and carbon dioxide (CO 2 ) fluxes over a semi‐arid oak savanna using daily integrated fluxes. The other case evaluated the responses of CO 2 and methane (CH 4 ) flux measurements to a set of biophysical forcings at a restored tidal wetland using thirty‐minute averages. The statistical model, based on 4 independent variables, explained up over 90% of the variation in daily integrated flux densities of water vapor and net carbon dioxide exchange at the savanna site. This fit was defined by distinct non‐linear responses to such drivers as gross primary production, photosynthetically active radiation, air temperature, vapor pressure deficit and soil moisture. At the tidal wetland site, we evaluated net carbon dioxide and methane fluxes with short‐term measurements to capture the influence of rising and falling tides and seasonality in biological activity. The statistical model defined the shape of the forcing of fluxes due to the roles of carbon exudates, water table depth, oxygen level in the water column, temperature and vegetation status. The statistical fits of the greenhouse gas fluxes were less precise than the savanna case. The fetch varies on a run‐to‐run basis as it is comprised of a heterogeneous mosaic of open water and vegetation. Furthermore, it is difficult to monitor the environmental conditions of the archaea and bacteria in the sediments that produce methane and carbon dioxide.

Environmental Sciences & Ecology↗

Tensor Force Manifestations in Ab Initio Study of the {sup 2}H(d,{gamma}){sup 4}He, {sup 2}H(d,p){sup 3}H, and {sup 2}H(d,n){sup 3}He Reactions

The {sup 2}H(d,p){sup 3}H, {sup 2}H(d,n){sup 3}He, and {sup 2}H(d,{gamma}){sup 4}He reactions are studied at low energies in a multichannel ab initio model that takes into account the distortions of the nuclei. The internal wave functions of these nuclei are given by the stochastic variational method with the AV8{sup '} realistic interaction and a phenomenological three-body force included to reproduce the two-body thresholds. The obtained astrophysical S factors are all in very good agreement with the experiment. The most important channels for both transfer and radiative capture are identified by comparing to calculations with an effective central force. They are all found to dominate thanks to the tensor force.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Quantum mechanical force field for hydrogen fluoride with explicit electronic polarization

The explicit polarization (X-Pol) theory is a fragment-based quantum chemical method that explicitly models the internal electronic polarization and intermolecular interactions of a chemical system. X-Pol theory provides a framework to construct a quantum mechanical force field, which we have extended to liquid hydrogen fluoride (HF) in this work. The parameterization, called XPHF, is built upon the same formalism introduced for the XP3P model of liquid water, which is based on the polarized molecular orbital (PMO) semiempirical quantum chemistry method and the dipole-preserving polarization consistent point charge model. We introduce a fluorine parameter set for PMO, and find good agreement for various gas-phase results of small HF clusters compared to experiments and ab initio calculations at the M06-2X/MG3S level of theory. In addition, the XPHF model shows reasonable agreement with experiments for a variety of structural and thermodynamic properties in the liquid state, including radial distribution functions, interaction energies, diffusion coefficients, and densities at various state points.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DEM simulation of experimental dense granular packing

In this study we present numerical analysis performed on the experimental results of sphere packings of mono-sized hard sphere whose packing fraction spans across a wide range of 0.59<{Phi}<0.72. Using X-ray Computed Tomography (XCT), we have full access to the 3D structure of the granular packings. Numerical analysis performed on thr data provides the first experimental proofs of how densification affects local order parameters. Furthermore by combining Discrete Element Method (DEM) and the experimental results from XCT, we investigate how the intergranular forces change with the onset of crystallization.

36 MATERIALS SCIENCE↗

Deuteron-α scattering: Separable versus nonseparable Faddeev approach

Deuteron-induced reactions are widely used to probe nuclear structure and astrophysical information. Those (d,p) reactions may be viewed as three-body reactions and described with Faddeev techniques. Faddeev-AGS equations in momentum space have a long tradition of utilizing separable interactions in order to arrive at sets of coupled integral equations in one variable. However, it needs to be demonstrated that observables calculated based on separable interactions agree exactly with those based on nonseparable forces. Momentum space AGS equations are solved with separable and nonseparable forces as coupled integral equations. Deuteron-α scattering is calculated via momentum space AGS equations using the CD-Bonn neutron-proton force and a Woods-Saxon type neutron(proton)- 4 He force, for which the Pauli-forbidden S-wave bound state is projected out. Elastic as well as breakup observables are calculated and compared to results in which the interactions in the two-body sub-systems are represented by separable interactions derived in the Ernst-Shakin-Thaler (EST) framework. We find that the calculations based on the separable representation of the interactions and the original interactions give results that are in excellent agreement. Specifically, integrated cross sections and angular distributions for elastic scattering agree within ≈ 1 %, which is well below typical experimental errors. In addition, the fivefold differential cross sections corresponding to breakup of the deuteron agree extremely well.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Diffusive-to-ballistic transition in grain boundary motion studied by atomistic simulations

An adapted simulation method is used to systematically study grain boundary motion at velocities and driving forces across more than five orders of magnitude. This analysis reveals that grain boundary migration can occur in two modes, depending upon the temperature ( T ) and applied driving force ( P ). At low P and T , grain boundary motion is diffusional, exhibiting the kinetics of a thermally activated system controlled by grain boundary self-diffusion. At high P and T , grain boundary migration exhibits the characteristic kinetic scaling behavior of a ballistic process. A rather broad transition range in both P and T lies between the regimes of diffusive and ballistic grain boundary motion, and is charted here in detail. In conclusion, the recognition and delineation of these two distinct modes of grain boundary migration also leads to the suggestion that many prior atomistic simulations might have probed a different kinetic regime of grain boundary motion (ballistic) as compared to that revealed in most experimental studies (diffusional).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Measurement of the energetics of protein transport across the chloroplast thylakoid membrane [Chapter 19 in Protein Secretion]

Protein transport across cellular membranes represents an unknown, possibly significant drain on the total energy pool. Many protein transport systems utilize a mixture of energetic inputs, with contributions from both NTP hydrolysis and transmembrane electrochemical gradients. Both of these parameters will have to be measured before we can know the cost to the cell of its considerable protein transport activities. We describe here methods to evaluate the magnitude of the ΔpH across the thylakoid membrane, which serves as the driving force for protein transport on the cpTat pathway, and to determine how much energy is drained therefrom per protein translocated. Here, the methods derive from spectroscopic techniques, well known in the field of thylakoid energetics, to monitor the light-dependent ΔpH across the membrane and the rate of proton flux through the thylakoid lumen, combined with those to measure the rate of protein transport across the thylakoid membrane.

59 BASIC BIOLOGICAL SCIENCES↗

Structural and functional impact of troponin C-mediated Ca 2+ sensitization on myofilament lattice spacing and cross-bridge mechanics in mouse cardiac muscle

Acto-myosin cross-bridge kinetics are important for beat-to-beat regulation of cardiac contractility; however, physiological and pathophysiological mechanisms for regulation of contractile kinetics are incompletely understood. Here we explored whether thin filament-mediated Ca 2+ sensitization influences cross-bridge kinetics in permeabilized, osmotically compressed cardiac muscle preparations. We used a murine model of hypertrophic cardiomyopathy (HCM) harboring a cardiac troponin C (cTnC) Ca 2+ -sensitizing mutation, Ala8Val in the regulatory N-domain. We also treated wild-type murine muscle with bepridil, a cTnC-targeting Ca 2+ sensitizer. Our findings suggest that both methods of increasing myofilament Ca 2+ sensitivity increase cross-bridge cycling rate measured by the rate of tension redevelopment (k TR ); force per cross-bridge was also enhanced as measured by sinusoidal stiffness and I 1,1 -1/I 1,0 ratio from X-ray diffraction. Computational modeling suggests that Ca 2+ sensitization through this cTnC mutation or bepridil accelerates k TR primarily by promoting faster cross-bridge detachment. To elucidate if myofilament structural rearrangements are associated with changes in k(TR), we used small angle X-ray diffraction to simultaneously measure myofilament lattice spacing and isometric force during steady-state Ca 2+ activations. Within in vivo lattice dimensions, lattice spacing and steady-state isometric force increased significantly at submaximal activation. We conclude that the cTnC N-domain controls force by modulating both the number and rate of cycling cross-bridges, and that the both methods of Ca 2+ sensitization may act through stabilization of cTnC's D-helix. Furthermore, we propose that the transient expansion of the myofilament lattice during Ca 2+ activation may be an additional factor that could increase the rate of cross-bridge cycling in cardiac muscle. These findings may have implications for the pathophysiology of HCM.

60 APPLIED LIFE SCIENCES↗

initMIP-Antarctica: an ice sheet model initialization experiment of ISMIP6

Ice sheet numerical modeling is an important tool to estimate the dynamic contribution of the Antarctic ice sheet to sea level rise over the coming centuries. The influence of initial conditions on ice sheet model simulations, however, is still unclear. To better understand this influence, an initial state intercomparison exercise (initMIP) has been developed to compare, evaluate, and improve initialization procedures and estimate their impact on century-scale simulations. initMIP is the first set of experiments of the Ice Sheet Model Intercomparison Project for CMIP6 (ISMIP6), which is the primary Coupled Model Intercomparison Project Phase 6 (CMIP6) activity focusing on the Greenland and Antarctic ice sheets. Following initMIP-Greenland, initMIP-Antarctica has been designed to explore uncertainties associated with model initialization and spin-up and to evaluate the impact of changes in external forcings. Starting from the state of the Antarctic ice sheet at the end of the initialization procedure, three forward experiments are each run for 100 years: a control run, a run with a surface mass balance anomaly, and a run with a basal melting anomaly beneath floating ice. This study presents the results of initMIP-Antarctica from 25 simulations performed by 16 international modeling groups. The submitted results use different initial conditions and initialization methods, as well as ice flow model parameters and reference external forcings. We find a good agreement among model responses to the surface mass balance anomaly but large variations in responses to the basal melting anomaly. These variations can be attributed to differences in the extent of ice shelves and their upstream tributaries, the numerical treatment of grounding line, and the initial ocean conditions applied, suggesting that ongoing efforts to better represent ice shelves in continental-scale models should continue.

54 ENVIRONMENTAL SCIENCES↗

Excitation of Soliton-Type Waves in Crystals of the A{sub 3}B Stoichiometry

Using the method of molecular dynamics and taking Ni{sub 3}Al and Pt{sub 3}Al as examples, crystals of the A{sub 3}B composition are considered for the possibility of excitation of soliton-type waves in them. The potentials obtained by the embedded-atom method were used to describe interatomic interactions. It is shown that the harmonic external stimulus can excite waves of the soliton type in a Pt{sub 3}Al crystal, but not in Ni{sub 3}Al. Such compression–expansion waves are generated because of excitation of discrete breathers with soft nonlinearity that cannot exist in a Ni{sub 3}Al crystal near the affected region. The detected waves are capable of propagating to thousands of nanometers along the Pt{sub 3}Al crystal without losses of integrity and speed. The shape of the obtained wave corresponds to the kink solution of the sine-Gordon equation. The aggregate amount of energy transferred by a wave is determined by the number of rows of atoms involved in fluctuations; this may involve dozens and hundreds of electron volts.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dynamics in the quantum/classical limit based on selective use of the quantum potential

A classical limit of quantum dynamics can be defined by compensation of the quantum potential in the time-dependent Schrödinger equation. The quantum potential is a non-local quantity, defined in the trajectory-based form of the Schrödinger equation, due to Madelung, de Broglie, and Bohm, which formally generates the quantum-mechanical features in dynamics. Selective inclusion of the quantum potential for the degrees of freedom deemed “quantum,” defines a hybrid quantum/classical dynamics, appropriate for molecular systems comprised of light and heavy nuclei. The wavefunction is associated with all of the nuclei, and the Ehrenfest, or mean-field, averaging of the force acting on the classical degrees of freedom, typical of the mixed quantum/classical methods, is avoided. The hybrid approach is used to examine evolution of light/heavy systems in the harmonic and double-well potentials, using conventional grid-based and approximate quantum-trajectory time propagation. The approximate quantum force is defined on spatial domains, which removes unphysical coupling of the wavefunction fragments corresponding to distinct classical channels or configurations. The quantum potential, associated with the quantum particle, generates forces acting on both quantum and classical particles to describe the backreaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrochemical Synthesis of Monodisperse Platinum-Cobalt Nanocrystals

The synthesis of platinum-cobalt nanocrystals (NCs) using colloidal solvothermal techniques is well understood. However, for monodisperse NCs to form, high temperatures and environmentally detrimental solvents are needed. We report a room temperature, aqueous method of platinum-cobalt NC synthesis using electrochemical reduction as the driving force for nucleation and growth. It is found that colloidal NCs will form in both the presence and absence of surfactant. Additionally, we report a monodisperse electrochemical deposition of NCs utilising a transparent conducting oxide electrode. The methods developed here will allow for a synthetic method to produce nanocatalysts with minimal environmental impact and should be readily applicable to other NC systems, including single- and multi-component alloys.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗