Search NASA⌕ Search

SEARCH · Search NASA

Results for “generalized predictive control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Observation of nonlocal Josephson effect on double InAs nanowires

Short-range coherent coupling of two Josephson junctions (JJs) are predicted to generate a supercurrent in one JJ nonlocally modulated by the phase difference in the other. We report on observation of the nonlocal Josephson effect on double InAs nanowires as experimental evidence of the coherent coupling. We measure one JJ sharing one superconducting electrode with the other JJ and observe switching current oscillation as a control of the nonlocal phase difference. Our result will contribute to engineer novel superconducting phenomena with the short-range coherent coupling.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

TRUST Nonlinear Dynamics Testbed Assessment

The following assessment evaluates the efficacy of the control script for carrying out a linear signal to generate a linear mechanical response of the system: the TRUST nonlinear dynamics (TRUSTND) testbed. The hardware has three main components: the controller (NI PXIe 8861) embedded in the National Instruments chassis (NI PXIe 1092), the signal amplifier (The Modal Shop Linear Power Amplifier 2050E09) to amplify the output of a custom LabVIEW script, and a shaker (The Modal Shop Electrodynamic Exciter 2075E) where wave spring specimens live and are tested within the attached aluminum testbed (center mass). Different kinds of signals (single-tone, swept frequency and white noise) were sent through this hardware in the E-1 lab space at TA-53. First, the linearity of the setup was tested by specifying a sine wave in the control script and checking the quality of the oscillations in a wave spring (McMaster-Carr 9714K19 [1]). When passing a sine wave through the amplifier was succeeded, the frequency response of the wave spring was tested with white noise for comparison to finite-element model predictions. The testbed outputs a repeatable, linear response to the input excitation when used with the wave spring. These measurements reduce the uncertainty associated with the testbed and test procedure to better characterize uncertainty associated with material behavior (SX358 foam samples) in future tests

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

On the elastic anisotropy of the entropy-stabilized oxide (Mg, Co, Ni, Cu, Zn)O compound

Herein, we study the elastic properties of the entropy-stabilized oxide (Mg, Co, Ni, Cu, Zn)O using experimental and first principles techniques. Our measurements of the indentation modulus on grains with a wide range of crystallographic orientations of the entropy-stabilized oxide revealed a high degree of elastic isotropy at ambient conditions. First principles calculations predict mild elastic anisotropy for the paramagnetic structure, which decreases when the system is considered to be non-magnetic. When the antiferromagnetic state of CoO, CuO, and NiO is accounted for in the calculations, a slight increase in elastic anisotropy is observed, suggesting a coupling between magnetic ordering and the orientation dependent elastic properties. Furthermore, an examination of the local structure reveals that the isotropy is favored through local ionic distortions of Cu and Zn—due to their tendencies to form tenorite and wurtzite phases. The relationships between the elastic properties of the multicomponent oxide and those of its constituent binary oxides are reviewed. These insights open up new avenues for controlling isotropy for technological applications through tuning composition and structure in the entropy-stabilized oxide or the high-entropy compounds in general.

Entropy↗

Convergence of Eigenvector Continuation

Eigenvector continuation is a computational method that finds the extremal eigenvalues and eigenvectors of a Hamiltonian matrix with one or more control parameters. It does this by projection onto a subspace of eigenvectors corresponding to selected training values of the control parameters. The method has proven to be very efficient and accurate for interpolating and extrapolating eigenvectors. However, almost nothing is known about how the method converges, and its rapid convergence properties have remained mysterious. In this Letter, we present the first study of the convergence of eigenvector continuation. In order to perform the mathematical analysis, we introduce a new variant of eigenvector continuation that we call vector continuation. We first prove that eigenvector continuation and vector continuation have identical convergence properties and then analyze the convergence of vector continuation. Our analysis shows that, in general, eigenvector continuation converges more rapidly than perturbation theory. The faster convergence is achieved by eliminating a phenomenon that we call differential folding, the interference between nonorthogonal vectors appearing at different orders in perturbation theory. From our analysis we can predict how eigenvector continuation converges both inside and outside the radius of convergence of perturbation theory. Further, while eigenvector continuation is a nonperturbative method, we show that its rate of convergence can be deduced from power series expansions of the eigenvectors. Our results also yield new insights into the nature of divergences in perturbation theory.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dynamic Performance of High Bypass Ratio Turbine Engines With Water Ingestion

The research on dynamic performance of high bypass turbofan engines includes studies on inlets, turbomachinery and the total engine system operating with air-water mixture; the water may be in vapor, droplet, or film form, and their combinations. Prediction codes (WISGS, WINCOF, WINCOF-1, WINCLR, and Transient Engine Performance Code) for performance changes, as well as changes in blade-casing clearance, have been established and demonstrated in application to actual, generic engines. In view of the continuous changes in water distribution in turbomachinery, the performance of both components and the total engine system must be determined in a time-dependent mode; hence, the determination of clearance changes also requires a time-dependent approach. In general, the performance and clearances changes cannot be scaled either with respect to operating or ingestion conditions. Removal of water prior to phase change is the most effective means of avoiding ingestion effects. Sufficient background has been established to perform definitive, full scale tests on a set of components and a complete engine to establish engine control and operability with various air-water vapor-water mixtures.

Murthy, S. N. B.↗

RApid Blade and Blade-Vortex InTeraction (RABBIT) GUI implementation via MATLAB Application Designer

Rotorcraft noise source identification and reduction is crucial to the emergence of the Urban Air Mobility (UAM) market. One key rotor noise source is Blade Vortex Interaction (BVI), caused by the rotor wake interacting with the rotor blades. The low-fidelity RApid Blade and Blade-Vortex InTeraction (RABBIT) tool was created to predict the location and characteristics of Blade-Vortex Interaction (BVI) noise. RABBIT enables engineers to quickly locate and understand designs or configurations that cause significant BVI noise. Furthermore, RABBIT can identify the time and location of blade overlap for coaxial rotors. RABBIT is not a general acoustic prediction tool, but instead utilizes vortex and wake parameters to visualize and predict only BVI noise. To date, RABBIT has been validated against CAMRAD II and ANOPP2/AARON for three NASA Revolutionary Vertical Lift Technology (RVLT) concept vehicles: the Quiet Single Main Rotor (QSMR), Side-by-Side, and Quadrotor. RABBIT has been shown to be a useful BVI prediction tool capable of visualizing BVI as a function of various parameters. Impulse factor and time rate of change of loading allows for a unique BVI prediction technique that provides information on impulse strength, location, and frequency. This presentation will highlight how MATLAB’s App Designer was utilized to enable users to navigate RABBIT easily and efficiently without prior experience with MATLAB or rotorcraft acoustics. RABBIT users can build and view rotors in real time with options to control blade chord, radius, phasing, and airfoil geometry. Furthermore, multiple rotors can be combined to create state-of-the-art multi-rotor vehicles or fleets. Editable tables, sliding bars, and push buttons were implemented within MATLAB’s App Designer for RABBIT’s GUI to allow engineers and designers to predict low order acoustic impact of BVI occurrences.

Natasha Lydia Schatzman↗

Rotational fluxons of Bose-Einstein condensates in coplanar double-ring traps

Rotational analogs to magnetic fluxons in conventional Josephson junctions are predicted to emerge in the ground state of rotating tunnel-coupled annular Bose-Einstein condensates (BECs). Such topological condensate-phase structures can be manipulated by external potentials. We determine conditions for observing macroscopic quantum tunneling of a fluxon. Rotational fluxons in double-ring BECs can be created, manipulated, and controlled by external potentials in different ways than is possible in the solid-state system, thus rendering them a promising candidate system for studying and utilizing quantum properties of collective many-particle degrees of freedom.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optimal guidance law in quantum mechanics

Following de Broglie’s idea of a pilot wave, this paper treats quantum mechanics as a problem of stochastic optimal guidance law design. The guidance scenario considered in the quantum world is that an electron is the flight vehicle to be guided and its accompanying pilot wave is the guidance law to be designed so as to guide the electron to a random target driven by the Wiener process, while minimizing a cost-to-go function. After solving the stochastic optimal guidance problem by differential dynamic programming, we point out that the optimal pilot wave guiding the particle’s motion is just the wavefunction Ψ(t,x), a solution to the Schrödinger equation; meanwhile, the closed-loop guidance system forms a complex state–space dynamics for Ψ(t,x), from which quantum operators emerge naturally. Quantum trajectories under the action of the optimal guidance law are solved and their statistical distribution is shown to coincide with the prediction of the probability density function Ψ{sup ∗}Ψ. -- Highlights: •Treating quantum mechanics as a pursuit-evasion game. •Reveal an interesting analogy between guided flight motion and guided quantum motion. •Solve optimal quantum guidance problem by dynamic programming. •Gives a formal proof of de Broglie–Bohm’s idea of a pilot wave. •The optimal pilot wave is shown to be a wavefunction solved from Schrödinger equation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fermi Gases in Bichromatic Superlattices

The purpose of the program is the broad study of designer materials made of ultra-cold atoms and light, which provides new paradigms for emulating exotic layered systems. Bichromatic superlattices enable control and study of both dimensionality and dispersion in layered, strongly correlated Fermi gases, to model high-temperature superfluidity/superconductivity. Most layered materials are quasi-two-dimensional, neither two-dimensional, like a sheet, nor three-dimensional, like a gas, but somewhere in between. In quasi-2D layers with an unequal number of spin-up and spin-down electrons, particularly strong attraction between pairs of electrons with opposite spins is predicted to achieve the highest possible superconducting transition temperatures. To understand these materials, we emulate them with a layered, ultra-cold Fermi gas of 6Li atoms, magnetically tuned near a collisional (Feshbach) resonance, where precise control of the attraction, spin-composition, dimensionality and dispersion provides new tests of theory. The primary goals are of the program are: (1) Elucidation of the effects of dimensionality and confining potential shape on the enhancement of high-temperature superfluidity in a layered, strongly correlated Fermi gases; (2) Control of dispersion and the study of tunable Dirac points in one dimension.

36 MATERIALS SCIENCE↗

Deriving a dosage-response relationship for community response to high-energy impulsive noise

The inability to systematically predict community response to exposure to sonic booms (and other high energy impulsive sounds) is a major impediment to credible analyses of the environmental effects of supersonic flight operations. Efforts to assess community response to high energy impulsive sounds are limited in at least two important ways. First, a paucity of appropriate empirical data makes it difficult to infer a dosage-response relationship by means similar to those used in the case of general transportation noise. Second, it is unclear how well the 'equal energy hypothesis' (the notion that duration, number, and level of individual events are directly interchangeable determinants of annoyance) applies to some forms of impulsive noise exposure. Some of the issues currently under consideration by a CHABA working group addressing these problems are discussed. These include means for applying information gained in controlled exposure studies about different rates of growth of annoyance with impulsive and non-impulsive sound exposure levels, and strategies for developing a dosage-response relationship in a data-poor area.

Fidell, Sanford↗

Large Deformation Dynamic Bending of Composite Beams

Studies were conducted on the large deformation response of composite beams subjected to a dynamic axial load. The beams were loaded with a moderate eccentricity to promote bending. The study was primarily experimental but some finite element results were obtained. Both the deformation and the failure of the beams were of interest. The static response of the beams was also studied to determine potential differences between the static and dynamic failure. Twelve different laminate types were tested. The beams tested were 23 in. by 2 in. and generally 30 plies thick. The beams were loaded dynamically with a gravity-driven impactor traveling at 19.6 ft/sec and quasi-static tests were conducted on identical beams in a displacement controlled manner. For laminates of practical interest, the failure modes under static and dynamic loadings were identical. Failure in most of the laminate types occurred in a single event involving 40% to 50% of the plies. However, failure in laminates with 300 or 150 off-axis plies occurred in several events. All laminates exhibited bimodular elastic properties. The compressive flexural moduli in some laminates was measured to be 1/2 the tensile flexural modulus. No simple relationship could be found among the measured ultimate failure strains of the different laminate types. Using empirically determined flexural properties, a finite element analysis was reasonably accurate in predicting the static and dynamic deformation response.

Derian, E. J.↗

Task II: Three-dimensional Rotating Stall Inception and Effects of Rotating Tip Clearance Asymmetry in Axial Compressors

The effects of two types of flow non-uniformity on stall inception behavior were assessed with linearized stability analyses of two compressor flow models. Response to rotating tip clearance asymmetries induced by a whirling rotor shaft or rotor height variations were investigated with a two-dimensional flow model. A 3-D compressor model was also developed to study the stability of both full-span and part-span rotating stall modes in annular geometries with radial flow variations. The studies focussed on (1) understanding what compressor designs were sensitive to these types of circumferential and spanwise flow non-uniformities, and (2) situations where 2-D stability theories were inadequate because of 3-D flow effects. Rotating tip clearance non-uniformity caused the greatest performance loss for shafts whirling at the rotating stall frequency. A whirling shaft displacement of 1 percent chord caused the stalling mass flow to rise by as much as 10 percent and the peak pressure rise to decrease by 6 percent. These changes were an order of magnitude larger than for equivalent-sized stationary or rotor-locked clearance asymmetries. Spanwise flow non-uniformity always destabilized the compressor, so that 2-D models over-predicted that stall margin compared to 3-D theory. The difference increased for compressors with larger spanwise variations of characteristic slope and reduced characteristic curvature near the peak. Differences between 2-D and 3-D stall point predictions were generally unacceptable (2 - 4 percent of flow coefficient) for single-stage configurations, but were less than 1 percent for multistage compressors. 2-D analyses predicted the wrong stall mode for specific cases of radial inlet flow distortion, mismatching and annulus area contraction, where higher-order radial modes led to stall. The stability behavior of flows with circumferential or radial non-uniformity was unified through a single stability criterion. The stall point for both cases was set by the integral around the annulus of the pressure rise characteristic slope, weighted by the amplitude of the mode shape. For the case of steady circumferential variations, this criterion reduced to the integrated mean slope (IMS) condition associated with steady inlet distortions. The rotating tip clearance asymmetry model was also used to demonstrate the feasibility of actively controlling the shaft position to suppress rotating stall. In axisymmetric mean flow, this method only stabilized the first harmonic mode, increasing the operating range until surge or higher harmonic modes became unstable.

Suder, Kenneth↗

Interannual Variations and Trends in Global Land Surface Phenology Derived from Enhanced Vegetation Index During 1982-2010

Land swiace phenology is widely retrieved from satellite observations at regional and global scales, and its long-term record has been demonstmted to be a valuable tool for reconstructing past climate variations, monitoring the dynamics of terrestrial ecosystems in response to climate impacts, and predicting biological responses to future climate scenarios. This srudy detected global land surface phenology from the advanced very high resolution radiometer (AVHRR) and the Moderate Resolution Imaging Spectroradiometer (MODIS) data from 1982 to 2010. Based on daily enhanced vegetation index at a spatial resolution of 0.05 degrees, we simulated the seasonal vegetative trajectory for each individual pixel using piecewise logistic models, which was then used to detect the onset of greenness increase (OGI) and the length of vegetation growing season (GSL). Further, both overall interannual variations and pixel-based trends were examIned across Koeppen's climate regions for the periods of 1982-1999 and 2000-2010, respectively. The results show that OGI and OSL varied considerably during 1982-2010 across the globe. Generally, the interarmual variation could be more than a month in precipitation-controlled tropical and dry climates while it was mainly less than 15 days in temperature-controlled temperate, cold, and polar climates. OGI, overall, shifted early, and GSL was prolonged from 1982 to 2010 in most climate regions in North America and Asia while the consistently significant trends only occurred in cold climate and polar climate in North America. The overall trends in Europe were generally insignificant. Over South America, late OGI was consistent (particularly from 1982 to 1999) while either positive or negative OSL trends in a climate region were mostly reversed between the periods of 1982-1999 and 2000-2010. In the Northern Hemisphere of Africa, OGI trends were mostly insignificant, but prolonged GSL was evident over individual climate regions during the last 3 decades. OGI mainly showed late trends in the Southern Hemisphere of Africa while GSL was reversed from reduced GSL trends (1982-1999) to prolonged trends (2000-2010). In Australia, GSL exhibited considerable interannual variation, but the consistent trend lacked presence in most regions. Finally, the proportion of pixels with significant trends was less than I% in most of climate regions although it could be as large as 10%.

remote sensing↗

A 3D Simulation Platform for Decentralized Decision-Making in Advanced Air Mobility

This paper presents a general purpose, plug-and-play simulation platform for the use of future aviation stakeholders, such as urban airspace planners, air vehicle operators, ground operation managers, air traffic controllers and aviation researchers. The presented simulator platform is envisioned to serve as a toolkit to visualize, evaluate, and configure future advanced air mobility (AAM) operations. Highlighting features of this toolkit include a modular architecture that allows multiple smart unmanned aerial systems (UASs) to remotely connect to the simulation server and participate in decentralized decision-making scenario simulations. As an example of the decentralized decision-making scenario, an inter-agent negotiation-based conflict resolution use case is considered in this paper, where the UASs leverage the on-board/on-the-edge artificial intelligence (AI) capability to continually build situational awareness, and use this information to predict future conflicts and resolve them through machine-to-machine negotiation. As such operations are non-existent at scale currently, the presented simulation platform offers a viable and cost-effective alternative for assessing the efficacy of AAM research outcomes and challenges in future shared airspace usage. The simulation platform allows plug-n-play connectivity with AI and non-AI compute modules representing individual UAS’s flight control. Each module can interact with the simulation platform independently to communicate current and desired future states, situational awareness, and conflict resolution utilization costs for inter-agent negotiation. The simulation environment orchestrates realistic operational scenarios with spatiotemporal details, dynamic events, tactical conflict-resolution methods, interfaces for customizing air traffic control parameters, and information exchange uncertainties. In the future, this can serve as a community focused cloud simulation platform, incorporating multi-stakeholder airspace constraints from regulatory, government, city, and local agencies.

Aditya N Das↗

A 3D Simulation Platform for Decentralized Decision-Making in Advanced Air Mobility

This paper presents a general purpose, plug-and-play simulation platform for the use of future aviation stakeholders, such as urban airspace planners, air vehicle operators, ground operation managers, air traffic controllers and aviation researchers. The presented simulator platform is envisioned to serve as a toolkit to visualize, evaluate, and configure future advanced air mobility (AAM) operations. Highlighting features of this toolkit include a modular architecture that allows multiple smart unmanned aerial systems (UASs) to remotely connect to the simulation server and participate in decentralized decision-making scenario simulations. As an example of the decentralized decision-making scenario, an inter-agent negotiation-based conflict resolution use case is considered in this paper, where the UASs leverage the on-board/on-the-edge artificial intelligence (AI) capability to continually build situational awareness, and use this information to predict future conflicts and resolve them through machine-to-machine negotiation. As such operations are non-existent at scale currently, the presented simulation platform offers a viable and cost-effective alternative for assessing the efficacy of AAM research outcomes and challenges in future shared airspace usage. The simulation platform allows plug-n-play connectivity with AI and non-AI compute modules representing individual UAS’s flight control. Each module can interact with the simulation platform independently to communicate current and desired future states, situational awareness, and conflict resolution utilization costs for inter-agent negotiation. The simulation environment orchestrates realistic operational scenarios with spatiotemporal details, dynamic events, tactical conflict-resolution methods, interfaces for customizing air traffic control parameters, and information exchange uncertainties. In the future, this can serve as a community focused cloud simulation platform, incorporating multi-stakeholder airspace constraints from regulatory, government, city, and local agencies.

Aditya Das↗

Shielding Design of Gantry 3 - Paper 104

The proton therapy complex at PSI will be extended with a third irradiation facility, Gantry 3. This new Gantry is being built in the south-west area of the experimental hall of the High Intensity Proton Accelerator (HIPA) complex at PSI. Originally, it was planned to restrict the operation of Gantry 3 to 180 deg. by hardware means, but due to new considerations, the Gantry will be able to be moved in the full 360 deg. field. This change requires the redesign and reinforcement of the too weak shielding in the north and east directions. Additionally, the isocenter has been fixed, thus allowing for the exact calculation of distances, angles and effective shielding thicknesses in order to determine the dose rates more accurately. For these calculations a fast and simple semi-empirical analytical formula and the more time consuming, but also more sophisticated best estimate code MCNPX 2.7.0 have been used. The two methods used for the calculations of the dose rates are in good agreement. Generally, the analytical method provides the results instantaneously, but predicts higher dose rate values of a factor 2-3 larger than the Monte-Carlo particle transport code MCNPX. Thus, MCNPX should be used to verify the final design of the shielding, including additional details in the simulation model (e.g. ventilation shafts) which have weakening effect on the shielding. Such influences are hard to quantify analytically. The analytical method fails when the geometry becomes complex, i.e. when it is difficult to determine the effective length of the shielding; in the case of position 10 the shielding effect of the inner wall is difficult to quantify. Due to the change of the specification of the Gantry, the shielding was reinforced at the north and east sides, and the HC-layer was extended in front of the control room. The dose rates are acceptable with the new shielding layout. A detailed dose rate mapping is planned in the commissioning phase of Gantry 3 to verify the simulation results and to identify any remaining weak spots of the shielding. (authors)

43 PARTICLE ACCELERATORS↗

Phase diagrams for alkali-activated slag binders

Phase diagrams for alkali-activated slag (AAS) binders are simulated at (metastable) thermodynamic equilibrium, spanning the relevant compositional envelopes for these materials. The phase diagrams are generally consistent with experimental observations in the literature, dominated by calcium (alkali) aluminosilicate hydrate (C-(N-)A-S-H) gels and Mg-Al layered double hydroxides. Relationships between the stabilities of the predicted solid phase assemblages, pore solution compositions, and the bulk chemical composition are identified, yielding an improved understanding of AAS binder chemistry. Strätlingite is predicted at low to intermediate Si concentrations and at high Al content, while zeolites (and thus most likely also disordered alkali-aluminosilicate (hydrate) gels) tend to precipitate at higher concentrations of both Si and Al; katoite and AFm-type phases are stabilised at intermediate levels of CaO + Al{sub 2}O{sub 3} + MgO. The application of these results in designing AAS binders can enable the phase assemblages and chemical properties of these materials to be more precisely controlled.

36 MATERIALS SCIENCE↗

The use of vestibular models for design and evaluation of flight simulator motion

Quantitative models for the dynamics of the human vestibular system are applied to the design and evaluation of flight simulator platform motion. An optimal simulator motion control algorithm is generated to minimize the vector difference between perceived spatial orientation estimated in flight and in simulation. The motion controller has been implemented on the Vertical Motion Simulator at NASA Ames Research Center and evaluated experimentally through measurement of pilot performance and subjective rating during VTOL aircraft simulation. In general, pilot performance in a longitudinal tracking task (formation flight) did not appear to be sensitive to variations in platform motion condition as long as motion was present. However, pilot assessment of motion fidelity by means of a rating scale designed for this purpose, were sensitive to motion controller design. Platform motion generated with the optimal motion controller was found to be generally equivalent to that generated by conventional linear crossfeed washout. The vestibular models are used to evaluate the motion fidelity of transport category aircraft (Boeing 727) simulation in a pilot performance and simulator acceptability study at the Man-Vehicle Systems Research Facility at NASA Ames Research Center. Eighteen airline pilots, currently flying B-727, were given a series of flight scenarios in the simulator under various conditions of simulator motion. The scenarios were chosen to reflect the flight maneuvers that these pilots might expect to be given during a routine pilot proficiency check. Pilot performance and subjective rating of simulator fidelity was relatively insensitive to the motion condition, despite large differences in the amplitude of motion provided. This lack of sensitivity may be explained by means of the vestibular models, which predict little difference in the modeled motion sensations of the pilots when different motion conditions are imposed.

Bussolari, Steven R.↗