Search NASA⌕ Search

SEARCH · Search NASA

Results for “interface diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

A transmission electron microscopy and X-ray photoelectron spectroscopy study of annealing induced γ-phase nucleation, clustering, and interfacial dynamics in reactively sputtered amorphous alumina thin films

Pure α-Al{sub 2}O{sub 3} exhibits a very high degree of thermodynamical stability among all metal oxides and forms an inert oxide scale in a range of structural alloys at high temperatures. We report that amorphous Al{sub 2}O{sub 3} thin films sputter deposited over crystalline Si instead show a surprisingly active interface. On annealing, crystallization begins with nuclei of a phase closely resembling γ-Alumina forming almost randomly in an amorphous matrix, and with increasing frequency near the substrate/film interface. This nucleation is marked by the signature appearance of sharp (400) and (440) reflections and the formation of a diffuse diffraction halo with an outer maximal radius of ≈0.23 nm enveloping the direct beam. The microstructure then evolves by a cluster-coalescence growth mechanism suggestive of swift nucleation and sluggish diffusional kinetics, while locally the Al ions redistribute slowly from chemisorbed and tetrahedral sites to higher anion coordinated sites. Chemical state plots constructed from XPS data and simple calculations of the diffraction patterns from hypothetically distorted lattices suggest that the true origins of the diffuse diffraction halo are probably related to a complex change in the electronic structure spurred by the a-γ transformation rather than pure structural disorder. Concurrent to crystallization within the film, a substantially thick interfacial reaction zone also builds up at the film/substrate interface with the excess Al acting as a cationic source.

36 MATERIALS SCIENCE↗

Localizing Clinical Patterns of Blast Traumatic Brain Injury Through Computational Modeling and Simulation

Blast traumatic brain injury is ubiquitous in modern military conflict with significant morbidity and mortality. Yet the mechanism by which blast overpressure waves cause specific intracranial injury in humans remains unclear. Reviewing of both the clinical experience of neurointensivists and neurosurgeons who treated service members exposed to blast have revealed a pattern of injury to cerebral blood vessels, manifested as subarachnoid hemorrhage, pseudoaneurysm, and early diffuse cerebral edema. Additionally, a seminal neuropathologic case series of victims of blast traumatic brain injury (TBI) showed unique astroglial scarring patterns at the following tissue interfaces: subpial glial plate, perivascular, periventricular, and cerebral gray-white interface. The uniting feature of both the clinical and neuropathologic findings in blast TBI is the co-location of injury to material interfaces, be it solid-fluid or solid-solid interface. This motivates the hypothesis that blast TBI is an injury at the intracranial mechanical interfaces. In order to investigate the intracranial interface dynamics, we performed a novel set of computational simulations using a model human head simplified but containing models of gyri, sulci, cerebrospinal fluid (CSF), ventricles, and vasculature with high spatial resolution of the mechanical interfaces. Simulations were performed within a hybrid Eulerian—Lagrangian simulation suite (CTH coupled via Zapotec to Sierra Mechanics). Because of the large computational meshes, simulations required high performance computing resources. Twenty simulations were performed across multiple exposure scenarios—overpressures of 150, 250, and 500 kPa with 1 ms overpressure durations—for multiple blast exposures (front blast, side blast, and wall blast) across large variations in material model parameters (brain shear properties, skull elastic moduli). All simulations predict fluid cavitation within CSF (where intracerebral vasculature reside) with cavitation occurring deep and diffusely into cerebral sulci. These cavitation events are adjacent to high interface strain rates at the subpial glial plate. Larger overpressure simulations (250 and 500kPa) demonstrated intraventricular cavitation—also associated with adjacent high periventricular strain rates. Additionally, models of embedded intraparenchymal vascular structures—with diameters as small as 0.6 mm—predicted intravascular cavitation with adjacent high perivascular strain rates. The co-location of local maxima of strain rates near several of the regions that appear to be preferentially damaged in blast TBI (vascular structures, subpial glial plate, perivascular regions, and periventricular regions) suggest that intracranial interface dynamics may be important in understanding how blast overpressures leads to intracranial injury.

59 BASIC BIOLOGICAL SCIENCES↗

Absorption-line detections of 10{sup 5}-10{sup 6} K gas in spiral-rich groups of galaxies

Using the Cosmic Origins Spectrograph (COS) on the Hubble Space Telescope, the COS Science Team has conducted a high signal-to-noise survey of 14 bright QSOs. In a previous paper, these far-UV spectra were used to discover 14 'warm' (T ≥ 10{sup 5} K) absorbers using a combination of broad Lyα and broad O VI absorptions. A reanalysis of a few of this new class of absorbers using slightly relaxed fitting criteria finds as many as 20 warm absorbers could be present in this sample. A shallow, wide spectroscopic galaxy redshift survey has been conducted around these sight lines to investigate the warm absorber environment, which is found to be spiral-rich groups or cluster outskirts with radial velocity dispersions σ = 250-750 km s{sup –1}. While 2σ evidence is presented favoring the hypothesis that these absorptions are associated with the galaxy groups and not with the individual, nearest galaxies, this evidence has considerable systematic uncertainties and is based on a small sample size so it is not entirely conclusive. If the associations are with galaxy groups, the observed frequency of warm absorbers (dN/dz = 3.5-5 per unit redshift) requires them to be very extended as an ensemble on the sky (∼1 Mpc in radius at high covering factor). Most likely these warm absorbers are interface gas clouds whose presence implies the existence of a hotter (T ∼ 10{sup 6.5} K), diffuse, and probably very massive (>10{sup 11} M {sub ☉}) intra-group medium which has yet to be detected directly.

79 ASTRONOMY AND ASTROPHYSICS↗

Exploring the Role of Inorganic and Organic Interfaces on CO 2 and CH 4 Partitioning: Case Study of Silica, Illite, Calcite, and Kerogen Nanopores on Gas Adsorption and Nanoscale Transport Behaviors

The adsorption, partitioning, and diffusion of CO 2 and CH 4 in organic–inorganic pores composed of kerogen with silica, illite, or calcite are studied using density functional theory and classical molecular dynamics simulations. The adsorption and partitioning behavior of CO 2 and CH 4 molecules is found to be a function of chemistry of the solid interface, pore size, and surface area. CO 2 molecules are preferentially adsorbed compared to CH 4 molecules on silica, illite, calcite, and kerogen surfaces due to significant contributions of electrostatic interactions with the atoms of the associated surfaces. CO 2 and CH 4 molecules display higher adsorption energy on calcite and silica compared to those on illite and kerogen because of enhanced interactions with the positively charged calcium ions on the calcite surface and the hydroxyl group (-OH) on the silica surface. Enhanced internal nanopores and the availability of adsorption active sites in illite and kerogen matrices aid in higher partitioning of the gas molecules into these pores. CO 2 has a significant influence on the clustering and swelling of kerogen fragments compared to CH 4 . Higher CO 2 adsorption on inorganic and kerogen surfaces results in lower overall self-diffusivities compared to CH 4 . This study illustrates surface and pore size controls on the adsorption, partitioning, and self-diffusivities of CO 2 and CH 4 at conditions relevant for subsurface energy applications. The chemistry of the surfaces along with the availability of internal pores and active adsorption sites influences the adsorption behavior of gases. Our results suggest that CO 2 stored in depleted gas reservoirs may preferentially inhabit nanoconfined pores.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High field-effect mobility at the (Sr,Ba)SnO{sub 3}/BaSnO{sub 3} interface

A perovskite oxide, BaSnO{sub 3}, has been classified as one of transparent conducting materials with high electron mobility, and its application for field-effect transistors has been the focus of recent research. Here we report transistor operation in BaSnO{sub 3}-based heterostructures with atomically smooth surfaces, fabricated on SrTiO{sub 3} substrates by the (Sr,Ba)SnO{sub 3} buffer technique. Indeed, modulation of band profiles at the channel interfaces with the insertion of wide bandgap (Sr,Ba)SnO{sub 3} as a barrier layer results in a significant improvement of field-effect mobility, implying effective carrier doping at the regulated heterointerface. These results provide an important step towards realization of high-performance BaSnO{sub 3}-based field-effect transistors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterization of Alloy 600 joints exposed to a high-temperature supercritical-carbon dioxide environment

Highlights: • Diffusion-bond showed similar corrosion and carburization behavior as parent matrix. • Diffusion-bond line migrated due to the Cr-depletion induced recrystallization. • Alloy 182 fusion-weld showed larger weight gains with outer Mn-rich oxides. • The presence of SiO{sub 2} in chromia suppressed carburization at the oxide/matrix interface. • Despite larger weight gains, Alloy 182 fusion-weld showed negligible tensile property changes. - Abstract: Two types of Alloy 600 joints, such as diffusion-bonded joint and Alloy 182 fusion-weld, were exposed to supercritical-CO{sub 2} environment at 550 and 650 °C (20 MPa) for 1000 h. The diffusion-bond region showed similar oxidation characteristics as parent Alloy 600, but the migration of diffusion bond line below oxide layer was observed due to the Cr-depletion induced recrystallization. For Alloy 182 fusion-weld, outer Mn-rich oxides (Mn{sub 3}O{sub 4} and MnCr{sub 2}O{sub 4}) and a small amount of inner SiO{sub 2} mixed with chromia were formed due to high Mn and Si contents. The presence of SiO{sub 2} in chromia suppressed carburization at the oxide/matrix interface, which resulted in the formation of an amorphous C layer between the outer Mn-rich oxide and inner Cr-rich oxide. For Alloy 182 fusion-weld, tensile property changes after exposure to supercritical-CO{sub 2} environment were negligible.

36 MATERIALS SCIENCE↗

Solution Processed Ternary Tin (II) Alloy as Hole–Transport Layer of Sn–Pb Perovskite Solar Cells for Enhanced Efficiency and Stability

Tin-lead (Sn-Pb) narrow bandgap (NBG) perovskites show great potential in both single-junction and all-perovskite tandem solar cells. Sn-Pb perovskite solar cells (PSCs) are still limited by low charge collection efficiency and poor stability. Here, we report a ternary Sn (II) alloy of SnOCl as the hole-transport material (HTM) with a work function of 4.95 eV for Sn-Pb PSCs. The solution processed SnOCl layer has a texture structure which not only reduces the optical loss of the devices but also changes grain growth of Sn-Pb perovskites and boosts the carrier diffusion length to 3.63 μm. The formation of small perovskite grains at the HTM/perovskite interface is suppressed. These result in an almost constant internal quantum efficiency of 96 ± 2% across the absorption spectrum of Sn-Pb perovskites. The SnOCl HTM significantly enhances the stability of Sn-Pb PSCs with 87% of its initial efficiency retained after 1-sun illumination for 1,200 h, and keep 85% efficiency under 85°C thermal stress for 1,500 h. Furthermore, the hybrid HTM further improve the stabilized efficiencies of single-function Sn-Pb PSCs and all-perovskite tandem solar cells to 23.2% and 25.9%, respectively. This discovery opens an avenue to the multi-component metal alloys as HTM in PSCs.

36 MATERIALS SCIENCE↗

Corrosion Behavior of Ta-10W Coatings on CP-Ti and TC4 Substrates

The corrosion resistance of commercial purity titanium (CP-Ti) and Ti-6Al-4V (TC4) alloys coated with Ta-10W via multi-arc ion plating is investigated. The coating with uniform thickness exhibited silvery, dense, and continuous surface without apparent defects. The interface between the Ta-10W coating and substrate was dense with light elemental diffusion. The coating x-ray diffraction profile was body-centered cubic, α-Ta. The corrosion current density of the coated samples was reduced by one order of magnitude in 3.5% HCl solution, compared to that of the substrates. Electrochemical impedance spectroscopy showed that the Ta-10W coating improved the substrate metal corrosion resistance by slowing down the corrosion tendency and rate, increasing the charge transfer resistance and dielectric property of the double layer. Electrochemical corrosion testing showed that the Ta-10W coating improved the substrates’ corrosion resistances. After immersion in 5% HCl solution for 168 h, the uncoated substrates exhibited severe corrosion, whereas the CP-Ti and TC4 substrates coated by Ta-10W were still intact and dense. Point scanning of the immersed corrosion demonstrated that the Ta-10W coating reduced the relative oxygen content from 5.17 to 0.78% of the TC4. These results indicated that the Ta-10W coating was efficient in protecting the CP-Ti and TC4 from corrosion.

36 MATERIALS SCIENCE↗

Microstructure characterization of as-fabricated and 475 Degrees C annealed U–7 wt.% Mo dispersion fuel in Al–Si alloy matrix

High-density uranium (U) alloys with an increased concentration of U are being examined for the development of research and test reactors with low enriched metallic fuels. The U-Mo fuel alloy dispersed in Al-Si alloy has attracted particular interest for this application. This paper reports our detailed characterization results of as-fabricated and annealed (475 Degrees C for 4 h) U-Mo dispersion fuels in Al-Si matrix with a Si concentration of 2 and 5 wt.%, named as As2Si, As5Si, An2Si, An5Si accordingly. Techniques employed for the characterization include scanning electron microscopy and transmission electron microscopy with specimen prepared by focused ion beam in situ lift-out. Fuel plates with Al-5 wt.% Si matrix consistently yielded thicker interaction layers developed between U-Mo particles and Al-Si matrix, than those with Al-2 wt.% Si matrix, given the same processing parameters. A single layer of interaction zone was observed in as-fabricated samples (i.e., As2Si, As5Si), and this layer mainly consisted of U3Si3Al2 phase. The annealed samples contained a two-layered interaction zone, with a Si-rich layer near the U-Mo side, and an Al-rich layer near the Al-Si matrix side. The U3Si5 appeared as the main phase in the Si-rich layer in An2Si sample, while both U3Si5 and U3Si3Al2 were identified in sample An5Si. The Al-rich layer in sample An2Si was amorphous, whereas that in sample An5Si mostly consisted of crystalline U(Al,Si)3, along with a small fraction of U(Al,Si)4 and U6Mo4Al43 phases. The influence of Si on the diffusion and reaction in the development of interaction layers in U(Mo)/Al(Si) is discussed in the light of growth-controlling mechanisms and irradiation performance.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Higher-order compositional modeling of three-phase flow in 3D fractured porous media based on cross-flow equilibrium

Numerical simulation of multiphase compositional flow in fractured porous media, when all the species can transfer between the phases, is a real challenge. Despite the broad applications in hydrocarbon reservoir engineering and hydrology, a compositional numerical simulator for three-phase flow in fractured media has not appeared in the literature, to the best of our knowledge. In this work, we present a three-phase fully compositional simulator for fractured media, based on higher-order finite element methods. To achieve computational efficiency, we invoke the cross-flow equilibrium (CFE) concept between discrete fractures and a small neighborhood in the matrix blocks. We adopt the mixed hybrid finite element (MHFE) method to approximate convective Darcy fluxes and the pressure equation. This approach is the most natural choice for flow in fractured media. The mass balance equations are discretized by the discontinuous Galerkin (DG) method, which is perhaps the most efficient approach to capture physical discontinuities in phase properties at the matrix-fracture interfaces and at phase boundaries. In this work, we account for gravity and Fickian diffusion. The modeling of capillary effects is discussed in a separate paper. We present the mathematical framework, using the implicit-pressure-explicit-composition (IMPEC) scheme, which facilitates rigorous thermodynamic stability analyses and the computation of phase behavior effects to account for transfer of species between the phases. A deceptively simple CFL condition is implemented to improve numerical stability and accuracy. We provide six numerical examples at both small and larger scales and in two and three dimensions, to demonstrate powerful features of the formulation.

97 MATHEMATICS AND COMPUTING↗

Post-growth thermal oxidation of wurtzite InN thin films into body-center cubic In{sub 2}O{sub 3} for chemical/gas sensing applications

Post-growth thermal oxidations of InN have been studied using high-resolution x-ray diffraction (HRXRD) and secondary ion-mass spectroscopy (SIMS). The InN thin films, having relative high crystal quality, were grown by metal–organic chemical vapor deposition (MOCVD) on c-sapphire substrates using InGaN/GaN buffer layers. HRXRD reveals that oxidation of wurtzite InN into body-center cubic In{sub 2}O{sub 3} occurred at elevated temperatures. A Si{sub 3}N{sub 4} encapsulation improves the crystal quality of In{sub 2}O{sub 3} oxidized by using conventional rapid thermal annealing (RTA) but it results in the presence of undesired metallic indium. Cycle-RTA not only improves the crystal quality but also avoids the byproduct of metallic indium. SIMS depth profile, using contaminate elements as the ‘interface markers,’ provide evidence that the oxidation of InN is dominated by oxygen inward diffusion mechanism. Together with the HRXRD results, we conclude that the crystal quality of the resultant In{sub 2}O{sub 3}/InN heterostructure is mainly controlled by the balance between the speeds of oxygen diffusion and InN thermal dissociation, which can be effectively tuned by cycle-RTA. The obtained In{sub 2}O{sub 3}/InN heterostructures can be fundamental materials for studying high speed chemical/gas sensing devices. - Graphical abstract: Oxidation of h-InN into bcc-In{sub 2}O{sub 3} has been realized at elevated temperatures. A Si{sub 3}N{sub 4} cap improves the crystal quality of In{sub 2}O{sub 3} oxidized by conventional RTA but it results in the presence of undesired metallic indium. Cycle-RTA not only improves the crystal quality but also avoids the byproduct of metallic indium. SIMS depth profiles provide evidence that the oxidation of InN is dominated by oxygen inward diffusion mechanism. The crystal quality of the resultant In{sub 2}O{sub 3}/InN heterostructure is mainly controlled by the balance between the speeds of oxygen diffusion and InN thermal dissociation, which can be effectively tuned by cycle-RTA. - Highlights: • Oxidation of h-InN into bcc-In{sub 2}O{sub 3} has been realized at elevated temperatures. • Si{sub 3}N{sub 4} cap improves In{sub 2}O{sub 3} quality obtained by RTA but results in undesired indium. • Cycle-RTA not only improves the quality but also avoids the byproduct of indium. • The oxidation of InN is dominated by oxygen inward diffusion mechanism. • Cycle-RTA tunes the speeds of oxygen diffusion and InN thermal dissociation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of O{sub 3} and H{sub 2}O oxidants on C and N-related impurities in atomic-layer-deposited La{sub 2}O{sub 3} films observed by in situ x-ray photoelectron spectroscopy

The effect of H{sub 2}O and O{sub 3} oxidants on the behavior of residual C and N-related impurities as well as Si out-diffusion and interfacial layer formation in atomic-layer-deposited La{sub 2}O{sub 3} films grown at 250 deg. C were examined using in situ x-ray photoelectron spectroscopy. The silicate formation was suppressed in a La{sub 2}O{sub 3} film grown using O{sub 3} compared to that deposited using H{sub 2}O, but interfacial layer growth was enhanced. The accumulation of C and N-related residues with low binding energy, which originated from incomplete reactions, was suppressed in La{sub 2}O{sub 3} films grown using O{sub 3}. However, the use of O{sub 3} resulted in La-carbonate phase in film.

36 MATERIALS SCIENCE↗

Two-dimensional viscous flow simulation of a shock accelerated heavy gas cylinder

Numerical simulation of Richtmyer–Meshkov instability (RMI) is conducted using an improved localized artificial diffusivity (LAD) approach, which is used to treat discontinuities in the form of material interfaces and shocks in the flow-field. The RMI occurs on a cylindrical interface between air and SF 6 accelerated by a Mach 1.2 shock initially in air. Navier–Stokes simulation is conducted to accurately predict the mixing between the two fluids. The beginning conditions for the two-dimensional simulations are matched to previous experimental work by C. Tomkins et al. [“An experimental investigation of mixing mechanisms in shock-accelerated flow,” J. Fluid Mech. 611, 131 (2008)] and good agreement is found between the experimental data and numerical results. The study on initial condition sensitivity indicates that the initial pressure and density gradient are critical parameters that determine the primary vortex generation responsible for the flow development. A grid convergence study is carried out and the relative contribution of the artificial properties introduced by the LAD method is characterized. Novel to this study is the exploration of the effect of the third species (acetone used as a tracer particle in the experiments to obtain contour fields using planar laser induced florescence). The effect of the presence of the third species on the evolution of the RMI and mixing is shown to be non-negligible and an estimate of the amount of the tracer species that was present in the initial experimental set-up is given.

42 ENGINEERING↗

Re-Examining the Properties of the Aqueous Vapor-Liquid Interface Using Dispersion Corrected Density Functional Theory

First-principles molecular dynamics simulations, in which the forces are computed from electronic structure calculations, have great potential to provide unique insight into structure, dynamics, electronic properties, and chemistry at aqueous interfaces that is not available from empirical force fields. The majority of current first-principles simulations are driven by forces derived from density functional theory with generalized gradient approximations to the exchange-correlation energy, which do not capture dispersion interactions. We have carried out first-principles molecular dynamics simulations of air-water interfaces employing a particular generalized gradient approximation to the exchange-correlation functional (BLYP), with and without empirical dispersion corrections. We assess the utility of the dispersion corrections by comparison of a variety of structural, dynamic, and thermodynamic properties of bulk and interfacial water with experimental data, as well as other first-principles and force field-based simulations. This work was supported by the US Department of Energy, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy.

1ST PRINCIPLES↗

Characterization of the insulator barrier and the superconducting transition temperature in GdBa{sub 2}Cu{sub 3}O{sub 7−δ}/BaTiO{sub 3} bilayers for application in tunnel junctions

The optimization of the superconducting properties in a bottom electrode and the quality of an insulator barrier are the first steps in the development of superconductor/insulator/superconductor tunnel junctions. Here, we study the quality of a BaTiO{sub 3} tunnel barrier deposited on a 16 nm thick GdBa{sub 2}Cu{sub 3}O{sub 7−δ} thin film by using conductive atomic force microscopy. We find that the tunnel current is systematically reduced (for equal applied voltage) by increasing the BaTiO{sub 3} barrier thickness between 1.6 and 4 nm. The BaTiO{sub 3} layers present an energy barrier of ≈1.2 eV and an attenuation length of 0.35–0.5 nm (depending on the applied voltage). The GdBa{sub 2}Cu{sub 3}O{sub 7−δ} electrode is totally covered by a BaTiO{sub 3} thickness above 3 nm. The presence of ferroelectricity was verified by piezoresponse force microscopy for a 4 nm thick BaTiO{sub 3} top layer. The superconducting transition temperature of the bilayers is systematically suppressed by increasing the BaTiO{sub 3} thickness. This fact can be associated with stress at the interface and a reduction of the orthorhombicity of the GdBa{sub 2}Cu{sub 3}O{sub 7−δ}. The reduction in the orthorhombicity is expected by considering the interface mismatch and it can also be affected by reduced oxygen stoichiometry (poor oxygen diffusion across the BaTiO{sub 3} barrier)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Three-dimensional modeling of hyphal fusion, branching, and nutrient transport in filamentous fungi

Fungi exhibit behaviors distinct from other microbes. Filamentous fungi grow by extending complex networks of branched filaments collectively referred to as the mycelium. These networks can expand over large distances and traverse low-nutrient areas by translocating nutrients through the filament network. This spatial characteristic makes filamentous fungi crucial for soil ecosystems, supporting stable microbial communities and promoting plant growth. However, simulating these behaviors is complex. The elongated nature of fungal compartments results in different mechanical interactions compared to the commonly modeled spherical bacteria. These detailed hyphal mechanics require specialized consideration and are often excluded from conventional fungal simulation packages. Additionally, the extensive fungal networks in nature demand computationally intensive simulations, necessitating high-performance algorithms. Therefore, realistic fungi simulations require specialized software. Here, we introduce a fungal modeling expansion to the high-performance biological modelling and interface exchange (bmx) software suite. bmx leverages adaptive mesh refinement in AMReX for chemical diffusion and incorporates a full mechanical model for bacterial cells, accelerated by GPUs. By extending bmx to model filamentous particles, we demonstrate the formation of complex filament networks through interactions like hyphal branching and fusion (anastomosis). We show that the networks produced match real-world fungal structures through various metrics. This work supports computational studies of fungal growth dynamics and can be adapted to investigate the growth of other filamentous structures in biology or materials science. The expanded-BMX package is open-sourced and is available online.

Cell mechanics↗

Catalytic and Transport Behaviors of Model and Porous and Composite Nanostructures

As stressed in the Basic Energy Sciences Advisory Committee (BESAC) Report “New Science for a Secure and Sustainable Energy Future” (December 2008), solving our Nation’s energy challenges will entail more than incremental changes in present materials-related technologies; new, advanced routes to nanostructured materials with transformational properties will be required. Herein we describe the design and fabrication of a hybrid biotic/abiotic membrane reactor that, mimicking natural systems, employs the metalloenzyme, carbonic anhydrase, to separate CO 2 from N 2 with unprecedented purity and rate. The membrane design, synthesis, and operation are based on multiple biomimetic and nanoscale fabrication strategies, nanoscale dimensional features, and nanoscale physical phenomena, for example: 1) Bottom-up self-assembly of a membrane comprising a periodic, aligned, cylindrical nanopore array with 8 nm diameter pores designed to accommodate carbonic anhydrase (CA) enzymes 2) Top-down Atomic Layer Deposition (ALD) and plasma processing of the nanopore array to create 18nm deep (by 8nm in diameter) superhydrophilic pores bounded by hydrophobic/superhydrophobic interfaces 3) Formation of a continuous, defect free, ultra-thin (~18-nm thick) but strong water membrane by capillary condensation within the uniformly-sized, superhydrophilic nanopore array 4) Accommodation of CA within the water filled nanopore array (~2 CAs per hydrophilic pore channel) to achieve an effective CA concentration within the 18-nm thick water membrane over 10X greater than achievable in solution Exposed to a mixture of CO 2 and N 2 this biomimetic membrane rapidly and selectively dissolves CO 2 within the CA filled water nano-channels on the ‘upstream side’ and regenerates CO 2 at the superhydrophobic interface on the ‘downstream’ side. In combination, the high CA concentration and exceptionally short diffusion distances enable rapid and highly selective CO 2 separation from N 2 and H 2 . Our membrane has a combined CO 2 flux and selectivity that exceed by orders of magnitude all existing CO 2 membranes and for the first time meet the US Department of Energy guidelines for CO 2 sequestration technologies. (The performance of our membrane was recognized by an R&D100 Award and the first R&D100 Green Technology Award in 2015 and an issued US Patent in 2017). We believe this membrane could be employed in combination with sequestration to help reduce greenhouse gas emissions and provide a viable, economically feasible pathway to achieve the goals of the 2016 Paris Accord, which aims to maintain a global temperature rise this century less than 2°C above pre-industrial levels. Further this membrane concept could be adapted to other enzymes to accomplish other separations of interest, e.g. H 2 . We also have established processing-structure-property relationships of ultrathin membrane-like monolayer materials that are intrinsically catalytic. Establishing processing-structure-property relationships for monolayer materials is crucial for a vast range of applications spanning optics, catalysis, electronics, and energy. Presently, for MoS 2 , a promising catalyst for artificial photosynthesis, considerable debate surrounds the structure/property relationships of its various allotropes. Using high-resolution transmission electron microscopy supported by density functional theory, we unambiguously solved the structure of MoS 2 monolayers and showed lithium intercalation to direct a preferential transformation of the basal plane from 2H (trigonal prismatic) to 1T’ (clustered Mo). These changes alter the energetics of MoS 2 interactions with hydrogen ((GH), and, with respect to catalysis, the 1T’ transformation renders the normally inert basal plane amenable towards hydrogen adsorption and H 2 evolution achieving Hydrogen Evolution Reaction (HER) catalytic activity comparable to 2H MoS 2 edges on Au(111), one of the most active HER catalysts known.

77 NANOSCIENCE AND NANOTECHNOLOGY↗