Search NASA⌕ Search

SEARCH · Search NASA

Results for “interface stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Endotaxially stabilized B2-FeSi nanodots in Si (100) via ion beam co-sputtering

We report on the formation of embedded B2-FeSi nanodots in [100]-oriented Si substrates, and investigate the crystallographic mechanism underlying the stabilization of this uncommon, bulk-unstable, phase. The nanodots were approximately 10 nm in size, and were formed by iron thin film deposition and subsequent annealing. Cross-sectional transmission electron microscopy, energy loss spectroscopy mapping, and quantitative image simulation and analysis were utilized to identify the phase, strain, and orientational relationship of the nanodots to the host silicon lattice. X-ray photoelectron spectroscopy was utilized to analyze the surface composition and local bonding. Elasticity calculations yielded a nanodot residual strain value of −18%. Geometrical phase analysis graphically pinpointed the positions of misfit dislocations, and clearly showed the presence of pinned (11{sup ¯}1{sup ¯}){sub Si}//(100){sub FeSi}, and unpinned (2{sup ¯}42){sub Si}//(010){sub FeSi}, interfaces. This partial endotaxy in the host silicon lattice was the mechanism that stabilized the B2-FeSi phase.

36 MATERIALS SCIENCE↗

Efficient Flowline Simulations of Ice Shelf-Ocean Interactions: Sensitivity Studies with a Fully Coupled Model

Thermodynamic flowline and plume models for the ice shelf-ocean system simplify the ice and ocean dynamics sufficiently to allow extensive exploration of parameters affecting ice-sheet stability while including key physical processes. Comparison between geophysically and laboratory-based treatments of ice-ocean interface thermodynamics shows reasonable agreement between calculated melt rates, except where steep basal slopes and relatively high ocean temperatures are present. Results are especially sensitive to the poorly known drag coefficient, highlighting the need for additional field experiments to constrain its value. These experiments also suggest that if the ice-ocean interface near the grounding line is steeper than some threshold, further steepening of the slope may drive higher entrainment that limits buoyancy, slowing the plume and reducing melting; if confirmed, this will provide a stabilizing feedback on ice sheets under some circumstances.

polar oceanography↗

Electron Doping by Charge Transfer at LaFeO 3 /Sm 2 CuO 4 Epitaxial Interfaces

The breakdown of the lattice translational invariance symmetry that occurs at complex oxide interfaces may profoundly modify their electronic structure, leading to interfacial states with properties drastically different from those of the superlattice individual components. The appearance of a conducting two dimensional (2D) electron gas at the interface between two insulating oxides and induced magnetism in a non-magnetic material are just two among many fascinating examples. [ 1 8 ] One of the key factors underlying novel properties is the modifi cation of the doping and orbital occupancy near those interfaces, which may result from charge transfer processes. [ 3 , 9 11 ] If materials used in heterostructures have different work functions, a non-equilibrium situation will be created at the interface and charge will be transferred until the chemical potential levels off. [ 12 ] The use of such phenomena to modify doping in heterostructures has been proposed theoretically as a new route to avoid the quenched disorder that inevitably accompanies the chemical doping. At the interface between a Mott insulating parent compound of the high critical temperature superconductor (HTSC) family and a suitable material that would act as the charge donor, electron doped phases could be stabilized which would eventually turn metallic and perhaps superconducting. [ 12 , 13 ] Such charge transfer processes have been observed at interfaces involving copper oxides such as La 0.7 Ca 0.3 MnO 3 / YBa 2 Cu 3 O 7 , [ 14 ] La 2 x Sr x CuO 4 /La 2 CuO 4 [ 15 ] and SrTi 1 x Nb x O 3 / Sm 2 CuO 4 . [ 16 ] While a novel 2D superconducting state was found at the La 2-x Sr x CuO 4 /La 2 CuO 4 interface, [ 17 ] the effect of doping by charge transfer could not be examined in the other two cases due to the detrimental effect on the YBa 2 Cu 3 O 7 superconductivity of the spin polarized electrons from La 0.7 Ca 0.3 MnO 3 in one case and due to the conducting nature of the SrTi 1 x Nb x O 3 in the other case, which obscures changes in the conducting properties of the interface layer. In this paper, the structural and

Bruno, Flavio Y.↗

Brazed Carbon Nanotube Arrays: Decoupling Thermal Conductance and Mechanical Rigidity

Bonding two solids at their interface is the most effective way to achieve a mechanically robust and thermally conducting interface. However, for high‐temperature applications, bonded interfaces between dissimilar materials experience high thermomechanical stress that degrades their performance in terms of cyclic stability (under thermal load) and lifetime. The present study shows that integrating a carbon nanotube (CNT) array as a stress‐relief element to a traditional braze joint mitigates the adverse effects of thermomechanical stress while preserving mechanical robustness and excellent heat transfer characteristic at the interface. A substantial reduction in total thermal interface resistance is achieved (from 41 mm 2 K W −1 for bare CNT array to less than 3 mm 2 K W −1 for a CNT array integrated with braze alloy). A brazed metal/insulator interface (between Cu and quartz) with a CNT array between them exhibits low thermal interface resistance even after extreme thermal cycling whereas the same interface delaminates readily when brazed without a CNT array. The reported technique provides a promising route for substantially improving the problematic high‐temperature interface, a major hindrance in achieving stable and efficient operation for systems such as thermoelectric generators that operate at elevated temperatures (above 400 °C).

Hao, Menglong↗

Commissioning and performance of the BNL EBIS LLRF system

The Electron Beam Ion Source (EBIS) LLRF system utilizes the RHIC LLRF upgrade platform to achieve the required functionality and flexibility. The LLRF system provides drive to the EBIS high-level RF system, employs I-Q feedback to provide required amplitude and phase stability, and implements a cavity resonance control scheme. The embedded system provides the interface to the existing Controls System, making remote system control and diagnostics possible. The flexibility of the system allows us to reuse VHDL codes, develop new functionalities, improve current designs, and implement new features with relative ease. In this paper, we will discuss the commissioning process, issues encountered, and performance of the system.

43 PARTICLE ACCELERATORS↗

pH-dependent reactivity of water at MgO(100) and MgO(111) surfaces

Facet-dependent surface charging of metal oxides in water dominates the ion transport behavior across the interface, in turn impacting many natural and industrial processes such as adsorption, the formation and stabilization of nanoparticle suspensions, corrosion, and heterogeneous catalysis. Here we investigated the pH-dependent surface chemistry of two low-index MgO single crystal surfaces, namely MgO(100) and MgO(111), using vibrational sum frequency generation (vSFG) spectroscopy. This allowed us to evaluate facet-dependent pH effects on the hydration and hydroxylation at the solid/aqueous interface and point-of-zero charge (PZC) values. The MgO system is complicated by its thermodynamic instability with respect to Mg(OH) 2 in water at ambient conditions. Here, for both hydroxylated MgO(100) and MgO(111) surfaces, the PZC is found to be around pH ∼ 12, which compares well with reported values for MgO single crystal and nanoparticle surfaces. However, structure specific differences in the molecular water hydrogen bonding network near the surface are evident at mildly acidic pH. To our knowledge, this is the first account of the PZC values for the MgO(111) single-crystal surface, an electrostatically unstable MgO termination that is prone to reconstruction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interactions with the Bifunctional Interface of the Transcriptional Coactivator DCoH1 Are Kinetically Regulated

Pterin-4a-carbinolamine dehydratase (PCD) is a highly conserved enzyme that evolved a second, unrelated function in mammals, as a transcriptional coactivator. As a coactivator, PCD is known as DCoH or dimerization cofactor of the transcription factor HNF-1. These two activities are associated with a change in oligomeric state: from two dimers interacting as an enzyme in the cytoplasm to a dimer interacting with a dimer of HNF-1 in the nucleus. The same interface of DCoH forms both complexes. To determine how DCoH partitions between its two functions, we studied in this paper the folding and stability of the DCoH homotetramer. We show that the DCoH1 homotetramer is kinetically trapped, meaning once it forms it will not dissociate to interact with HNF-1. In contrast, DCoH2, a paralog of DCoH1, unfolds within hours. A simple mutation in the interface of DCoH2 from Ser-51 to Thr, as found in DCoH1, increases the kinetic stability by 9 orders of magnitude, to τ½ ~2 million years. This suggests that the DCoH1·HNF-1 complex must co-fold to interact. We conclude that simple mutations can dramatically affect the dissociation kinetics of a complex. Residue 51 represents a “kinetic hot spot” instead of a “thermodynamic hot spot.” Kinetic regulation allows PCD to adopt two distinct functions. Finally, mutations in DCoH1 associated with diabetes affect both functions of DCoH1, perhaps by disrupting the balance between the two DCoH complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stabilizing the ferroelectric phase in doped hafnium oxide

The ferroelectric properties and crystal structure of doped HfO{sub 2} thin films were investigated for different thicknesses, electrode materials, and annealing conditions. Metal-ferroelectric-metal capacitors containing Gd:HfO{sub 2} showed no reduction of the polarization within the studied thickness range, in contrast to hafnia films with other dopants. A qualitative model describing the influence of basic process parameters on the crystal structure of HfO{sub 2} was proposed. The influence of different structural parameters on the field cycling behavior was examined. This revealed the wake-up effect in doped HfO{sub 2} to be dominated by interface induced effects, rather than a field induced phase transition. TaN electrodes were shown to considerably enhance the stabilization of the ferroelectric phase in HfO{sub 2} compared to TiN electrodes, yielding a P{sub r} of up to 35 μC/cm{sup 2}. This effect was attributed to the interface oxidation of the electrodes during annealing, resulting in a different density of oxygen vacancies in the Gd:HfO{sub 2} films. Ab initio simulations confirmed the influence of oxygen vacancies on the phase stability of ferroelectric HfO{sub 2}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Amorphous silicon carbide passivating layers for crystalline-silicon-based heterojunction solar cells

Amorphous silicon enables the fabrication of very high-efficiency crystalline-silicon-based solar cells due to its combination of excellent passivation of the crystalline silicon surface and permeability to electrical charges. Yet, amongst other limitations, the passivation it provides degrades upon high-temperature processes, limiting possible post-deposition fabrication possibilities (e.g., forcing the use of low-temperature silver pastes). We investigate the potential use of intrinsic amorphous silicon carbide passivating layers to sidestep this issue. The passivation obtained using device-relevant stacks of intrinsic amorphous silicon carbide with various carbon contents and doped amorphous silicon are evaluated, and their stability upon annealing assessed, amorphous silicon carbide being shown to surpass amorphous silicon for temperatures above 300 °C. We demonstrate open-circuit voltage values over 700 mV for complete cells, and an improved temperature stability for the open-circuit voltage. Transport of electrons and holes across the hetero-interface is studied with complete cells having amorphous silicon carbide either on the hole-extracting side or on the electron-extracting side, and a better transport of holes than of electrons is shown. Also, due to slightly improved transparency, complete solar cells using an amorphous silicon carbide passivation layer on the hole-collecting side are demonstrated to show slightly better performances even prior to annealing than obtained with a standard amorphous silicon layer.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

What's on the Surface? Physics and Chemistry of Delta-Doped Surfaces

Outline of presentation: 1. Detector surfaces and the problem of stability 2. Delta-doped detectors 3. Physics of Delta-doped Silicon 4. Chemistry of the Si-SiO2 Interface 5. Physics and Chemistry of Delta-doped Surfaces a. Compensation b. Inversion c. Quantum exclusion. Conclusions: 1. Quantum confinement of electrons and holes dominates the behavior of delta-doped surfaces. 2. Stability of delta-doped detectors: Delta-layer creates an approx 1 eV tunnel barrier between bulk and surface. 3. At high surface charge densities, Tamm-Shockley states form at the surface. 4. Surface passivation by quantum exclusion: Near-surface delta-layer suppresses T-S trapping of minority carriers. 5. The Si-SiO2 interface compensates the surface 6. For delta-layers at intermediate depth, surface inversion layer forms 7. Density of Si-SiO2 interface charge can be extremely high (>10(exp 14)/sq cm)

detectors↗

Morphology and water-barrier properties of silane films on aluminum and silicon

The goal of this study is to understand the effect of the substrate on the morphology and water-barrier properties of bis-silane films. Silane films are deposited on both Si and Al. Neutron reflectivity is used to assess the effect of hydrothermal conditioning on the films. Aluminum on silicon (no silane) was characterized first to facilitate understanding of the more complicated silane on Al-coated Si. A 200-{angstrom} Al layer with 55-{angstrom} oxide covers the surface of the silicon wafer. The reflectivity data show that water penetrates into the oxide layer. Silane films deposited on either Al or Si substrates have similar bulk and top-surface morphology. Studies of silanes on Si wafers, therefore, can be generalized to include Al. The substrate-silane interface, however, does depend on both the substrate and the silane. Because pH of the bis-sulfur silane solution is outside of the stability range for Al{sub 2}O{sub 3}, dissolution of the thin oxide film occurs during solution deposition. A water-depletion area is formed at the interface region due to this reaction.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Stable CdTe Photoanodes with Energetics Matching Those of a Coating Intermediate Band

Here, a TiO 2 coating was grown on a CdTe absorber by atomic layer deposition for stabilization against its photocorrosion during photoelectrochemical water splitting. Under simulated sunlight (AM 1.5G, 100 mW cm –2 ), this multilayer CdS/CdTe/TiO 2 /Ni/NiO x photoanode produced a light-limited photocurrent density of 24.5 ± 0.5 mA cm –2 and a photovoltage of 780 ± 20 mV. This record energy-conversion performance was comparable to those of baseline CdS/CdTe solar cells and was achieved only after the development of proper CdTe surface treatments prior to coating the stabilization layer. The TiO 2 coating, with its in-gap charge-transport intermediate band, facilitates hole transport as light exits the CdTe/TiO 2 interface. With proper interfacial chemistry, the electrochemical potential energy of the coating intermediate band matched that of the CdTe valence band. Moreover, the stabilized CdS/CdTe/TiO 2 /Ni/NiO x photoanodes showed 100 h stability for water oxidation under light-on/light-off cycles. This study provides insightful guidance for designing stabilization contacts for efficient and stable light-driven water oxidation.

14 SOLAR ENERGY↗

Membrane Nanomaterials Technology for Renewable Energy and Desalination

Development of nanostructures, interfaces and surface functionalities in advanced membrane materials are important to the membrane separation performances (molecular transport flux, separation selectivity, durability and long-term stability). Supported thin-layer hybrid material membranes represent a class of high-flux membranes when fast-transporting building-block interfaces and chemistry are introduced into the layer of cross-linked polymer and/or graphene oxide (GO) sheets. Both nanoscale engineering of nanostructure (such as GO dimension, interspacing, orientation and connectivity) and molecular engineering of the cross linking and functionality (such as sulfonic acid site) matter to the membrane layer performance. Fast water-transporting membrane is an example with many applications such as in biofuel and bioproduct processing, in water treatment & desalination and in energy storage devices such as super capacitors. The speaker will highlight some recent year’s research on the advanced membrane materials synthesis on superhydrophobic porous membranes, superhydrophilic polymer membranes and hybrid membranes with graphene oxide sheet assembly crosslinked or dispersed into the polymer coating materials. In addition, a solar-driven membrane desalination concept will be discussed as one example application for superhydrophobic porous nanomaterials.

Hu, Michael↗

Investigating the Effects of Chemical Gradients on Performance and Reliability within Perovskite Solar Cells with TOF-SIMS

Time-of-flight secondary-ion mass spectrometry (TOF-SIMS), a powerful analytical technique sensitive to all components of perovskite solar cell (PSC) materials, can differentiate between the various organic species within a PSC absorber or a complete device stack. The ability to probe chemical gradients through the depth of a device (both organic and inorganic), with down to 100 nm lateral resolution, can lead to unique insights into the relationships between chemistry in the absorber bulk, at grain boundaries, and at interfaces as well as how they relate to changes in performance and/or stability. In this essay, the technique is described; then, from the literature, several examples of how TOF-SIMS have been used to provide unique insight into PSC absorbers and devices are covered. Finally, the common artifacts that can be introduced if the data are improperly collected, as well as methods to mitigate these artifacts are discussed.

14 SOLAR ENERGY↗

Substrate-Driven Catalyst Reducibility for Oxygen Evolution and Its Effect on the Operation of Proton Exchange Membrane Water Electrolyzers

To increase the efficiency of hydrogen production by proton exchange membrane water electrolyzers (PEMWEs), the relationships between the specific activity and stability of the membrane–electrode assembly (MEA) must be clarified. Ir oxide electrodeposited on Ti substrate is used as an oxygen electrode, and its electronic properties and electrochemical behavior in PEMWE operation are observed. The electrode, fabricated through a facile strategy based on annealing in the air atmosphere, enhances the specific oxygen evolution reaction (OER) activity and stability in PEMWE operation. Furthermore, the electronic catalyst–substrate interactions associated with different reducibilities in the heteroatom system are studied. The morphology, electronic properties, and chemical state of the oxygen electrode are investigated through X-ray spectroscopy, microscopy techniques, and computational analyses. Thermal treatment of the catalyst-coated substrate decreases the bulk oxidation state of Ir and increases the surface oxidation state. According to the electrochemical and physical behavior analyses of PEMWEs, the oxygen content in the Ir oxide structure, which defines the OER activity and its stability, is influenced by the crystalline structure and formation of a stable interface between the catalyst and substrate. The outcomes can facilitate the development of strategies for enhancing the performance of PEMWEs and designing rational MEAs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructural evolution in Cu-Nb processed via friction consolidation

Immiscible alloys, whether in well-mixed or layered forms, are of increasing interest based on their novel structural and functional properties, such as enhanced thermal stability against grain growth or radiation-induced defect trapping at the interfaces. To address the need for new approaches to tailor microstructures, the microstructural development of an immiscible Cu-Nb alloy processed via friction consolidation of elemental powders is investigated. Friction consolidation is a solid-phase processing technique that imparts severe plastic strain into a deforming volume resulting in elevated temperatures below the melting temperature of the alloy. Two distinct processing pathways were chosen to understand the effect of thermomechanical conditions on the final microstructure. The microstructure was characterized using scanning electron microscopy, scanning transmission electron microscopy, and X-ray diffraction techniques. Path 1 exhibited larger strain, strain rate, and temperature as compared with path 2. In path 1, agglomerated Nb particles were present in the recrystallized ultrafine-grained Cu matrix, while in path 2 extremely fine and dispersed Nb particles were present in a highly deformed Cu matrix. In both pathways, supersaturation of Cu in Nb lattices was noted, but not vice-versa. The asymmetry in mixing is explained based on deformation-based, thermodynamic and kinetic factors. These findings provide a pathway for creation of novel tailored microstructures and improved properties in any number of binary immiscible alloy systems.

Cu-Nb alloys, Microstructural refinement, Friction↗

Double cylinder implosion experiments at the National Ignition Facility

Here, cylindrical implosion experiments are used to directly measure instability growth in a convergent geometry, providing a wealth of data for model validation. Double cylinders are a natural extension of the platform and enable measurements at a classically unstable interface, the outer surface of the inner cylinder, which experiences no ablative stabilization from the laser drive. However, the utility of this platform relies upon maintaining adequate axial uniformity of the inner cylinder during the implosion. Although previous smaller-scale double cylinder experiments exhibited acceptable levels of axial uniformity, radiation-hydrodynamics simulations of larger-scale double cylinders predict more axial non-uniformity induced by the impedance mismatch as the shock wraps around the axial ends of the inner cylinder. A mechanism to reduce axial non-uniformity in these larger double cylinder implosions is presented, and preliminary experimental data confirms the efficacy of the selected mitigation approach.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗