Search NASA⌕ Search

SEARCH · Search NASA

Results for “ionic interactions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Simulations of Low Mach Number Reactive Flows Coupled with Electric Fields

Applying electric fields to flames can provide an effective, non-invasive control of the combustion process. In this work, an algorithm recently introduced to handle the interactions between reactive flows and an electric field is extended to handle multiple dimensions and adaptive mesh refinement (AMR), and applied to a series of laminar flames. Experimental data allows to validate the ability of the algorithm to capture the mechanisms driving the flame response to electric fields.

electric fields↗

Simulations of Low Mach Number Reactive Flows Coupled with Electric Fields: Preprint

Applying electric fields to flames can provide an effective, non-invasive control of the combustion process. In this work, an algorithm recently introduced to handle the interactions between reactive flows and an electric field is extended to handle multiple dimensions and adaptive mesh refinement (AMR), and applied to a series of laminar flames. Experimental data allows to validate the ability of the algorithm to capture the mechanisms driving the flame response to electric fields.

electric field↗

FAR-ULTRAVIOLET OBSERVATION OF THE DRACO CLOUD WITH FIMS/SPEAR

We report an observation of the Draco cloud region using the Far-ultraviolet IMaging Spectrograph (FIMS/SPEAR). The spectra show important ionic lines, such as C IV {lambda}{lambda}1548, 1551, Si IV+O IV] {lambda}1394, Si II* {lambda}1533, and Al II {lambda}1671, indicating the existence of hot and warm interstellar gases toward the region. The map of the continuum is generally in accord with the infrared map, which indicates far-ultraviolet continuum is mostly the starlight scattered off by the dust grains in the Draco cloud. Enhanced C IV emission is seen inside the Draco cloud region and attributed to the turbulent mixing of the interacting cold and warm/hot media. This interpretation is supported by the detection of O III] {lambda}1661 emission line and the H{alpha} feature in this region. We found slightly fainter C IV and far brighter Si II* emissions covering the rest of the region outside the Draco cloud, in agreement with previous observations of Galactic halos. Additionally, we also found that the molecular hydrogen fluorescence map is consistent with the morphology of the atomic neutral hydrogen and dust emission of the Draco cloud, direct evidence supporting the notion that substantial amounts of hydrogen nuclei exist in molecular form in the cloud.

74 ATOMIC AND MOLECULAR PHYSICS↗

Ionic Diffusion in Slurry Electrolytes for Redox Flow Batteries

Slurry electrodes have been proposed as a method to decouple the storage and power capacities of hybrid redox flow batteries by allowing the reduced metal to adhere to a flowing dispersion of electrically conductive particles rather than accumulate in the flow cell. In this work, the ionic mass transport through these slurry electrolytes is investigated via voltammetry at a rotating disc electrode and in a parallel channel flow cell. A modified Levich equation, i l = 0.6 2 nFC ω 1 / 2 ν − 1 / 6 ( D + r 2 Φ ω m ) 2 / 3 , is developed to describe limiting currents to a rotating disc electrode when using a particle filled electrolyte. Mass transfer is demonstrated to be enhanced by greater particle loading so long as there are sufficient particles such that their respective flow velocity boundary layers interact. In the flow cell, faradaic current in a carbon black slurry electrolyte was observed to decrease over time. This suggests that the carbon particles adhere and accumulate on the stationary electrode, impeding mass transport by imposing diffusion path tortuosity. This accumulation is undesirable in hybrid redox flow batteries as it encourages metal deposition in the cell, limiting the scalability of the technology.

Electrochemistry↗

Ionic Liquid Platform for Spinning Composite Chitin–Poly(lactic acid) Fibers

In the design of stronger chitin fibers reinforced with poly(lactic acid) (PLA), during this work, an ionic-liquid-based (IL-based) approach was developed in which both polymers were codissolved in an 1-ethyl-3-methylimidazolium acetate ([C 2 mim][OAc]) and wet-jet spun into composite fibers. Chitin, directly extracted from shrimp shell, had a solubility in the IL of 2.75 wt %, while PLA of MW 700 000 g/mol had a solubility of 49 wt %. Keeping the IL saturated in chitin, homogeneous solutions of chitin and PLA could be obtained up to 27 wt % (relative to the IL) PLA. Spinning dopes were prepared by maintaining the chitin concentration relative to the IL at 1.75 wt % and adding PLA in chitin to PLA weight ratios of 1:0.1 through 1:1 (PLA concentrations of 0.175–1.75 wt % relative to the IL). Homogeneous chitin/PLA fibers could be spun when the chitin to PLA ratio was between 1:0.1 and 1:0.3. The tensile strength and plasticity of the fibers depended on the chitin to PLA ratio with the highest plasticity (8.8% vs 3.0% for pure chitin fibers), strength (112 vs 71 MPa), and stiffness (5.9 vs 4.2 GPa) observed for fibers with a chitin to PLA ratio of 1:0.3. Studies of the fracturing surface of the fibers indicated that fracturing occurred through an initial disruption of the interactions between polymer chains, followed by complete fiber breakage. The work not only demonstrates that homogeneous composite fibers can be spun using a biopolymer and PLA additive, but also suggests a versatile platform for preparation of multiple biopolymer–PLA materials using solution processing methods.

1-Ethyl-3-methylimidazolium acetate↗

Ion Transport in 2D Nanostructured $\pi$-Conjugated Thieno[3,2- b ]thiophene-Based Liquid Crystal

Leveraging the self-assembling behavior of liquid crystals designed for controlling ion transport is of both fundamental and technological significance. Here, we have designed and prepared a liquid crystal that contains (2,5-bis(5-(2,5,8,11-tetraoxatridecan-13-yl)thiophen-2yl)thieno[3,2-b]thiophene (BTTT) as mesogenic core and conjugated segment and symmetric tetra(ethylene oxide) (EO4) as polar side chains for ionic conducting regions. Driven by the crystallization of the BTTT cores, BTTT/dEO4 exhibits well-ordered smectic phases below 71.5 °C as confirmed by differential scanning calorimetry, polarized optical microscope, temperature dependent wide-angle X-ray scattering and grazing incidence wide-angle X-ray scattering (GIWAXS). We adopted a combination of experimental GIWAXS and molecular dynamics (MD) simulations to better understand the molecular packing of BTTT/dEO4 films, particularly when loaded with the ion conducting salt, lithium bis(trifluoromethanesulfonyl)imide (LiTFSI). Ionic conduction of BTTT/dEO4 is realized by the addition of LiTFSI, with the material able to maintain smectic phases up to r = [Li + ]/[EO] = 0.1. In this work, The highest ionic conductivity of 8 × 10 -3 S/cm was attained at an intermedium salt concentration of r = 0.05. It was also found that ion conduction in BTTT/dEO4 is enhanced by forming a smectic layered structure with irregular interfaces between the BTTT and EO4 layers and by the lateral film expansion upon salt addition. This can be explained by the enhancement of the misalignment and configurational entropy of the side chains, which increase their local mobility and that of the solvated ions. Our molecular design thus illustrates how, beyond the favorable energetic interactions that drive the assembly and ion solvating domains, modulation of entropic effects can also be favorably harnessed to improve ion conduction.

thin film electrochemical impedance spectroscopy↗

DNA origami protection and molecular interfacing through engineered sequence-defined peptoids

DNA nanotechnology has established approaches for designing programmable and precisely controlled nanoscale architectures through specific Watson−Crick base-pairing, molecular plasticity, and intermolecular connectivity. In particular, superior control over DNA origami structures could be beneficial for biomedical applications, including biosensing, in vivo imaging, and drug and gene delivery. However, protecting DNA origami structures in complex biological fluids while preserving their structural characteristics remains a major challenge for enabling these applications. Here, we developed a class of structurally well-defined peptoids to protect DNA origamis in ionic and bioactive conditions and systematically explored the effects of peptoid architecture and sequence dependency on DNA origami stability. The applicability of this approach for drug delivery, bioimaging, and cell targeting was also demonstrated. A series of peptoids (PE1–9) with two types of architectures, termed as “brush” and “block,” were built from positively charged monomers and neutral oligo-ethyleneoxy monomers, where certain designs were found to greatly enhance the stability of DNA origami. Through experimental and molecular dynamics studies, we demonstrated the role of sequence-dependent electrostatic interactions of peptoids with the DNA backbone. We showed that octahedral DNA origamis coated with peptoid (PE2) can be used as carriers for anticancer drug and protein, where the peptoid modulated the rate of drug release and prolonged protein stability against proteolytic hydrolysis. Finally, we synthesized two alkyne-modified peptoids (PE8 and PE9), conjugated with fluorophore and antibody, to make stable DNA origamis with imaging and cell-targeting capabilities. Our results demonstrate an approach toward functional and physiologically stable DNA origami for biomedical applications.

36 MATERIALS SCIENCE↗

Ion intercalation engineering of electronic properties of two-dimensional crystals of 2H-TaSe 2

Ion intercalation was recently used to explore two-dimensional (2D) transition metal dichalcogenides (TMDs) with precise tuning of ion concentration in a field-effect-transistor configuration. However, how to systematically change the properties of 2D TMDs, e.g., superconductivity and charge density waves, by ion intercalation has not been explored. As such, we report in this paper results of electrical transport measurements on 2D crystals of 2H-TaSe 2 intercalated with Li ions that is tuned continuously by ionic gating. Shubnikov–de Haas magnetoconductance oscillation and Hall coefficient measurements on crystals of 2H-TaSe 2 revealed an ion intercalation induced multi- to single-band change in the Fermi surface (FS) topology, deep in the charge density wave phase, resulting in a reduction of the number of independent channels for electronic conduction. A remarkable crossover from weak antilocalization to weak localization tuned by gate voltage or temperature was found and attributed to the ion intercalation induced variations in the spin-orbital coupling and electron-phonon interaction. These observations provide new insight into the enhancement of superconductivity and the suppression of charge density waves in 2D 2H-TaSe 2 induced by ion intercalation and demonstrate furthermore the great potential of ion intercalation for engineering electronic properties of 2D TMDs.

36 MATERIALS SCIENCE↗

Development of a Conceptual Process for Selective CO 2 Capture from Fuel Gas Streams Using [hmim][Tf 2 N] Ionic Liquid as a Physical Solvent

The Ionic Liquid (IL) [hmim][Tf 2 N] was used as a physical solvent in an Aspen Plus simulation, employing the Peng-Robinson Equation of State (P-R EOS) with Boston-Mathias (BM) alpha function and standard mixing rules, to develop a conceptual process for CO 2 capture from a shifted warm fuel gas stream produced from Pittsburgh # 8 coal for a 400 MWe power plant. The physical properties of the IL, including density, viscosity, surface tension, vapor pressure and heat capacity were obtained from literature and modeled as a function of temperature. Also, available experimental solubility values for CO 2 , H 2 , H 2 S, CO, and CH 4 in this IL were compiled and their binary interaction parameters (Δ ij and l ij ) were optimized and correlated as functions of temperature. The Span-Wager Equation-of-State EOS was also employed to generate CO 2 solubilities in [hmim][Tf 2 N] at high pressures (up to 10 MPa) and temperatures (up to 510 K). The conceptual process developed consisted of 4 adiabatic absorbers (2.4 m ID, 30 m high) arranged in parallel and packed with Plastic Pall Rings of 0.025 m for CO 2 capture; 3 flash drums arranged in series for solvent (IL) regeneration with the pressure-swing option; and a pressure-intercooling system for separating and pumping CO 2 up to 153 bar to the sequestration sites. The compositions of all process streams, CO 2 capture efficiency, and net power were calculated using Aspen Plus simulator. The results showed that, based on the composition of the inlet gas stream to the absorbers, 95.67 mol% of CO 2 was captured and sent to sequestration sites; 99.5 mol% of H 2 was separated and sent to turbines; the solvent exhibited a minimum loss of 0.31 mol%; and the net power balance of the entire system was 30.81 MW. These results indicated that [hmim][Tf 2 N] IL could be used as a physical solvent for CO 2 capture from warm shifted fuel gas streams with high efficiency.

20 FOSSIL-FUELED POWER PLANTS↗

Enhanced Gas Absorption in the Ionic Liquid 1- n -Hexyl-3-methylimidazolium Bis(trifluoromethylsulfonyl)amide ([hmim][Tf 2 N]) Confined in Silica Slit Pores: A Molecular Simulation Study

Two-dimensional NP{sub xy}T and isostress-osmotic (N{sub 2}P{sub xy}Tf{sub 1}) Monte Carlo simulations were used to compute the density and gas absorption properties of the ionic liquid (IL) 1-n-hexyl-3- methylimidazolium bis(Trifluoromethylsulfonyl)amide ([hmim][Tf{sub 2}N]) confined in silica slit pores (25-45 Å). Self-diffusivity values for both gas and IL were calculated from NVE molecular dynamics simulations using both smooth and atomistic potential models for the silica. Simulations show that the molar volume for [hmim][Tf{sub 2}N] confined in 25-45 Å silica slit pores are 12-31% larger than for the bulk IL at 313-573 K and 1 bar. The amounts of CO{sub 2}, H{sub 2}, and N{sub 2} absorbed in the confined IL are typically 1.1-3 times larger than in the bulk IL due to larger molar volumes for the confined IL compared to the bulk IL. The CO{sub 2}, N{sub 2}, and H{sub 2} molecules are generally absorbed close to the silica wall where the IL density is very low. This arrangement causes the self-diffusivities for these gases in the confined IL to be 2 to 8 times larger than in the bulk IL at 298-573 K. The solubility for water in the confined and bulk ILs are similar, which is likely due to strong water interactions with [hmim][Tf{sub 2}N] through hydrogen-bonding resulting in the confined IL molar volume playing a less important role in determining H{sub 2}O solubility. Water molecules were largely absorbed in the IL-rich region rather than close to the silica wall. The self-diffusivities for water correlate with the confined IL. The confined IL exhibits self-diffusivities larger than the bulk IL at lower temperatures, but smaller than the bulk IL at higher temperatures. The findings from simulations are consistent with available experimental data for similar confined IL systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Competing electronic states emerging on polar surfaces

Excess charge on polar surfaces of ionic compounds is commonly described by the two-dimensional electron gas (2DEG) model, a homogeneous distribution of charge, spatially-confined in a few atomic layers. Here, by combining scanning probe microscopy with density functional theory calculations, we show that excess charge on the polar TaO 2 termination of KTaO 3 (001) forms more complex electronic states with different degrees of spatial and electronic localization: charge density waves (CDW) coexist with strongly-localized electron polarons and bipolarons. These surface electronic reconstructions, originating from the combined action of electron-lattice interaction and electronic correlation, are energetically more favorable than the 2DEG solution. They exhibit distinct spectroscopy signals and impact on the surface properties, as manifested by a local suppression of ferroelectric distortions.

36 MATERIALS SCIENCE↗

Site Disorder Drives Cyanide Dynamics and Fast Ion Transport in Li 6 PS 5 CN

Halide argyrodite solid-state electrolytes of the general formula Li 6 PS 5 X exhibit complex static and dynamic disorder that plays a crucial role in ion transport processes. Here, we unravel the rich interplay between site disorder and dynamics in the plastic crystal argyrodite Li 6 PS 5 CN and the impact on ion diffusion processes through a suite of experimental and computational methodologies, including temperature-dependent synchrotron powder X-ray diffraction, AC electrochemical impedance spectroscopy, 7 Li solid-state NMR, and machine learning-assisted molecular dynamics simulations. Sulfide and (pseudo)halide site disorder between the two anion sublattices unilaterally improves long-range lithium diffusion irrespective of the (pseudo)halide identity, which demonstrates the importance of site disorder in dictating bulk ionic conductivity in the argyrodite family. Furthermore, we find that anion site disorder modulates the presence and time scales of cyanide rotational dynamics. Ordered configurations of anions enable fast, quasi-free rotations of cyanides that occur on time scales of 10 11 Hz at T = 300 K. In contrast, we find that cyanide dynamics are slow or frozen in Li 6 PS 5 CN when site disorder between the cyanide and sulfide sublattices is present at T = 300 K. We rationalize the observed differences in cyanide dynamics in the context of elastic dipole interactions between neighboring cyanide anions and local strain induced by the configurations of site disorder that may impact the energetic landscape for cyanide rotational dynamics. Through this study, we find that anion disorder plays a decisive role in dictating the extent and time scales of both lithium ion and cyanide dynamics in Li 6 PS 5 CN.

36 MATERIALS SCIENCE↗

Structure–Activity Relationships in Ether-Functionalized Solid-State Metal–Organic Framework Electrolytes

The structure–property relationships of metal–organic framework (MOF)-based solid-state electrolytes are not well understood. Herein, a systematic investigation of 12 Zr(IV)-based UiO-66 MOFs with varying ether-chain functional groups was carried out to elucidate the critical microscopic interactions that facilitate improved solid-state electrolyte performance. Enhanced sampling molecular dynamics (MD) simulations were employed and revealed a three-tier ion hopping mechanism: linker–linker hopping, linker-counterion hopping, and counterion-counterion hopping. Detailed structural analysis of the MD trajectories revealed that the chemistry and morphology of the linker groups affect the relative stability and population distribution of the electrolyte components, such that crown-ether-based linker groups enhance the probability of extended, low-barrier ion percolation pathways. As a result, we were able to tune the ionic conductivities by rationally manipulating the counterion distributions, linker binding strengths, and the configurational entropy (multivariability of the linkers). The resulting performance of these MOF-based solid-state electrolytes was significantly enhanced, with a methoxy-functionalized framework (UiO-66-L1 100 ) achieving high ionic conductivities of 2.32 × 10 –4 S/cm and 2.07 × 10 –3 S/cm at 30 °C and 90 °C, respectively, an order of magnitude greater than other all-solid-state MOF electrolyte systems. The electrolyte stability was evaluated with LiIn|LPSCl|MOF:LiTFSI|LPSCl|LiIn symmetric cells, showing excellent Li plating/stripping processes for over 2 months.

36 MATERIALS SCIENCE↗

Data of heavy elements for light sources in EUV and XUV and for other applications

Atomic ionic states and transition properties of elements with atomic numbers Z ranging from 50 to 80 are discussed as these are important to the understanding of plasmas containing such heavy elements. As such, data productions and the current status of theoretical calculations in this field are discussed. Further, recent spectroscopic measurements and respective theoretical analyses for W, Gd, and Nd are provided. The spectra of photoemissions elicited by the transitions between the sub-shell levels in N-sub-shell open atomic ions are of interest for the strong influence received from the interactions between the electronic state configurations with different constituent orbitals. Visible light emissions of W from M1 as well as E2 transitions are introduced and discussed.

74 ATOMIC AND MOLECULAR PHYSICS↗

Pore-Scale Oil Connectivity and Displacement by Controlled-Ionic-Composition Waterflooding Using Synchrotron X-Ray Microtomography

Controlled-ionic-composition waterflooding is an economic and effective method to improve oil recovery in carbonate oil reservoirs. Recent studies show controlling the salinity and ionic composition of injection water can alter the wettability of carbonate mineral surfaces. The pore-scale oil connectivity and displacement by controlled-ionic-composition waterflooding in heterogeneous carbonate reservoirs, especially at the early stage, is still unclear. The goal of this study is to examine the role of ion concentrations and types in the oil displacement efficiency and investigate the impact of the waterflooding on the pore-scale oil displacement using the national synchrotron facility. A carbonate rock sample was flooded with synthetic high-salinity water and other water solutions with different sulfate concentrations. The waterflooding processes were visualized with synchrotron X-ray microtomography to follow the evolution of pore-scale oil/brine interactions at typical field flow rates. Experimental results show that the water with lower sulfate concentration and higher salinity did not change the wettability of the pore surfaces. Higher sulfate ion concentrations in the water, in contrast, altered the wettability of carbonate pore surfaces from oil-wet to neutral-wet within the first few minutes of waterflooding. Finally, novel insight was gained on the ability of water with high-sulfate concentration to displace oil in the small pores and through abundant oil channels, which could consequently lead to higher oil recovery from the carbonate rock.

04 OIL SHALES AND TAR SANDS↗

Computational Fluid Dynamics Simulations to Support Efficiency Improvements in Aluminum Smelting Process

Smelting is broadly described as the extraction of a metal from its ore. In the United States, aluminum is commonly produced by smelting alumina in bauxite using the Hall-Héroult process. Optimization of equipment and processes in conventional smelting is crucial to enhancing process efficiency and productivity, is necessary for improving the techno-economic feasibility, which directly manifests as the growth of the American economy. To achieve optima, insightful data on the multiphysics phenomena that are inherent to the process must be obtained through physical investigation or high-fidelity numerical simulations. The resolution of relevant scales in time and space for smelting operations requires intensive, high-performance computing (HPC) simulations. Hostile operating conditions limit physical data acquisition to specific techniques; therefore, these data do not describe the multiscale interaction of simultaneous effects. Fortunately, in recent decades, significant advancements in computing hardware and computational methods have made the numerical resolution of such a complex process possible. In this study, a high-fidelity simulation of aluminum smelting was performed using an open-source tool, OpenFOAM, which analyzed many parameters characteristic to underlying phenomena. A multiphysics model based on the Eulerian-Eulerian multifluid approach was adopted. This model can resolve critical issues in the electrolytic smelting of aluminum, such as bubbling of carbon dioxide from the anode(s), magnetohydrodynamics from electromagnetic effects, ionic dissolution of the alumina in the electrolyte, and the evolution of thermal profiles. This study provides valuable connectivity for characteristic data that can direct the future designs of efficient smelters. A basic framework to model and simulate the smelting process using OpenFOAM is presented for user modification in keeping with process development. Of relevance to the flow field, a detailed investigation of vortices produced by bubble motion and electromagnetics is discussed, along with their impact on the evolution of thermal profiles. The predictions show small-scale vortices in the clearance between the anode and cathode caused by magnetic forces. Predictions also indicate relatively large-scale vortices in the inter-anode space resulting from carbon dioxide rising through the electrolytic flow field. The formation of vortices at the edges of anodes was shown to direct alumina charged by the feeder to the bottom of the anodes, thus preventing the entrapment of gas bubbles in the periphery of the bottom of the anode. Symmetry was observed in the location of cold spots in the electrolytic mixture in the vicinity of the feeder. Cold spots were also observed in the clearance between the anode and cathode due to the flow’s transmission of unconverted alumina to this region.

36 MATERIALS SCIENCE↗

Effects of interaction strength of associating groups on linear and star polymer dynamics

A small number of associating groups incorporated onto a polymer backbone have dramatic effects on the mobility and viscoelastic response of the macromolecules in melts. These associating groups assemble, driving the formation of clusters, whose lifetime affects the properties of the polymers. In this study, we probe the effects of the interaction strength on the structure and dynamics of two topologies, linear and star polymer melts, and further investigate blends of associative and non-associating polymers using molecular dynamics simulations. Polymer chains of approximately one entanglement length are described by a bead–spring model, and the associating groups are incorporated in the form of interacting beads with an interaction strength between them that is varied from 1 to 20 k B T. We find that, for all melts and blends, interaction of a few k B T between the associating groups drives cluster formation, where the size of the clusters increases with increasing interaction strength. These clusters act as physical crosslinkers, which slow the chain mobility. Blends of chains with and without associating groups macroscopically phase separate for interaction strength between the associating groups of a few k B T and above. For weakly interacting associating groups, the static structure function S(q) is well fit by functional form predicted by the random phase approximation where a clear deviation occurs as phase segregation takes place, providing a quantitative assessment of phase segregation.

36 MATERIALS SCIENCE↗