Search NASA⌕ Search

SEARCH · Search NASA

Results for “nuclear data validation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Comparing Sensitivity/Uncertainty Analysis Results for LR-0 Salt Experiments with Salt Reactor Models

Recent reactor physics measurements conducted at Research Centre Rez (RC Rez) used the LR-0 low power nuclear reactor to investigate neutronic impacts and uncertainties of FLiNa (60 mol% LiF and 40 mol% NaF) and FLiBe (2 LiF + BeF{sub 2}) salt targets. This included using FLiBe originally from the Molten Salt Reactor Experiment (MSRE) at Oak Ridge National Laboratory (ORNL), which contained enriched lithium (99.994 mol% {sup 7}Li). In collaboration with RC Rez, ORNL performed sensitivity/uncertainty (S/U) analyses of these LR-0 experiments with salt targets. Molten salt reactor technologies can be categorized into two general types: solid-fueled or liquid-fueled. Solid-fueled molten salt technologies are perhaps best represented by fluoride-salt-cooled high-temperature reactors (FHRs), which are solid-fueled and salt-cooled. They are potentially promising because they offer high-temperature outlet heat using a low-pressure, high-power-density system (relative to high temperature gas-cooled reactors). However, FHRs have never been built; therefore, no direct neutronic benchmarks exist for code or cross section validation work. Liquid-fueled molten salt reactors (MSRs) use a liquid salt as both fuel and coolant. MSRs can be designed to use a variety of fertile or fissile species as nuclear fuel, different neutron energy spectra, and a multitude of approaches for adding or removing material from the salt. The MSRE generated some operational data for fluoride salt MSRs, but no formal benchmarks currently exist based on the MSRE data, and the data available do not cover all operational conditions. Given these data limitations, ORNL performed S/U analyses using application models for FHR and MSR concepts to (1) identify potential sources of bias in FHR and MSR simulations resulting from cross section uncertainties and to (2) compare the sensitivity of neutron multiplication in FHR and MSR concepts to cross section data on an energy-dependent basis for specific nuclides against similar sensitivity results from LR-0 with a FLiBe salt target. In the future, these S/U analyses could inform the design of additional salt experiments or provide part of the basis for follow-up work to refine nuclear data. Please see the final project report for additional details beyond this paper.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Benchmark Study on Innovative Fuels for Fast Reactors with fuel performance codes

The Working Party on the Scientific Issues of the Fuel Cycle (WPFC) has been established under the auspices of the Nuclear Energy Agency (NEA) Nuclear Science Committee (NSC), to co-ordinate scientific activities regarding various existing and advanced nuclear fuel cycles, including advanced reactor systems, associated chemistry and flowsheets, development and performance of fuels and materials, accelerators and spallation targets. Various expert groups were established to cover the above-mentioned topics. Within the WPFC, the Expert Group on Innovative Fuels (EGIF) was created with the objective of conducting joint and comparative studies to support the development of innovative fuels such as homogeneous and heterogeneous fuels, ADS fuels, and oxide, metal, nitride and carbide fuels, all of which can be implemented in advanced nuclear fuel cycles with fast reactors. The scope of the expert group covers innovative fuel fabrication techniques, irradiation performance of innovative fuels, characterisation and post-irradiation examination methods and predictive codes for innovative fuel fabrication and performance. This report presents the results of a benchmark study on innovative fuels for fast reactors using fuel performance codes. Irradiation results were shared among participants, and code calculations were performed to gain further insights on the fuel behaviour. Each participating institution used its own fuel performance code. Code to code and code to experiment comparisons are expected to provide data and improve understanding on the effects of minor actinides on fuel behaviour. In conclusion, the need for improvement of codes will be evaluated and the needs for new experimental data will be identified in order to finalise the code validation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Experimental validation of a method characterizing bow tie filters in CT scanners using a real-time dose probe

Purpose: Beam-shaping or ''bow tie'' (BT) filters are used to spatially modulate the x-ray beam in a CT scanner, but the conventional method of step-and-shoot measurement to characterize a beam's profile is tedious and time-consuming. The theory for characterization of bow tie relative attenuation (COBRA) method, which relies on a real-time dosimeter to address the issues of conventional measurement techniques, was previously demonstrated using computer simulations. In this study, the feasibility of the COBRA theory is further validated experimentally through the employment of a prototype real-time radiation meter and a known BT filter. Methods: The COBRA method consisted of four basic steps: (1) The probe was placed at the edge of a scanner's field of view; (2) a real-time signal train was collected as the scanner's gantry rotated with the x-ray beam on; (3) the signal train, without a BT filter, was modeled using peak values measured in the signal train of step 2; and (4) the relative attenuation of the BT filter was estimated from filtered and unfiltered data sets. The prototype probe was first verified to have an isotropic and linear response to incident x-rays. The COBRA method was then tested on a dedicated breast CT scanner with a custom-designed BT filter and compared to the conventional step-and-shoot characterization of the BT filter. Using basis decomposition of dual energy signal data, the thickness of the filter was estimated and compared to the BT filter's manufacturing specifications. The COBRA method was also demonstrated with a clinical whole body CT scanner using the body BT filter. The relative attenuation was calculated at four discrete x-ray tube potentials and used to estimate the thickness of the BT filter. Results: The prototype probe was found to have a linear and isotropic response to x-rays. The relative attenuation produced from the COBRA method fell within the error of the relative attenuation measured with the step-and-shoot method. The BT filter thickness estimates resulting from the dual energy scans on the breast CT system were equivalent to the manufacturing specifications. The clinical CT evaluation produced data conceptually similar to previous computer simulations and plausible relative attenuation profiles were observed. Conclusions: The COBRA method is a fast and accurate method for BT filter characterization, which requires a simple experimental setup in a clinical environment. Because of the ease of data acquisition, multienergy scans can be acquired which allow characterization of the BT filter thickness.

60 APPLIED LIFE SCIENCES↗

Separate-Effects Validation Experiments for Models of Fracture in Ceramic Nuclear Fuel

A number of advances have recently been made in modeling fracture initiation and propagation in ceramic light water reactor (LWR) fuel. These include the use of techniques such as peridynamics, the extended finite element method (XFEM), the discrete element method (DEM), and phase field fracture. Improved predictions of fracture in LWR fuel can benefit fuel performance simulations in a number of ways, with important implications for radial relocation, pellet-cladding mechanical interactions, and fragmentation during accident conditions. Although these modeling approaches appear promising, to-date most of their applications have been to fresh fuel. A major limitation in applying these approaches with confidence to a wider variety of conditions, such as fragmentation of high-burnup fuel, is that there is very limited data that can be directly used to validate the results of these fracture models. While fracture patterns are available from cross-sections of numerous irradiated fuel rods, the fuel rods have typically been subjected to complex irradiation histories. To validate models of fracture propagation, focused experiments that give snapshots of the initiation and propagation of fracture under well characterized prototypical reactor conditions are needed. Under a multi-institutional U.S. Department of Energy Integrated Research Project (IRP), three separate-effects validation experiments are underway to provide information on the propagation of cracks in LWR fuel under controlled conditions. The primary challenge in developing such an experiment is in providing conditions that result in a radial temperature distribution that is prototypical of LWR in-reactor conditions. Two out-of-reactor experiments are being planned that employ very different approaches to achieve such a temperature distribution. The first of these achieves this by employing a combination of inductive and resistive electrical heating to generate volumetric heating. The second experiment involves slowly heating a pellet in a metal rod to a high temperature, and then quenching that rod in a cold bath. The quenching process generates a temperature profile approximating that in an LWR fuel rod for a moment, but has a very different temperature history from the LWR. Finally, an experiment is being planned for the Idaho National Laboratory TREAT reactor that will use nuclear fission as a heat source, and which will employ a metal heat sink to replicate the thermal conditions provided by coolant in an LWR. These experiments all have their advantages and drawbacks, with varying levels of ability to reproduce actual LWR conditions and varying ability to use instruments to monitor quantities of interest over the course of the experiment that can be used to validate fracture models. For that reason, these different experimental approaches are complimentary to each other, and the combined results are expected to significantly improve confidence in the ability of computational models to simulate fracture in ceramic nuclear fuel.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Nuclear counting filter based on a centered Skellam test and a double exponential smoothing

Online nuclear counting represents a challenge due to the stochastic nature of radioactivity. The count data have to be filtered in order to provide a precise and accurate estimation of the count rate, this with a response time compatible with the application in view. An innovative filter is presented in this paper addressing this issue. It is a nonlinear filter based on a Centered Skellam Test (CST) giving a local maximum likelihood estimation of the signal based on a Poisson distribution assumption. This nonlinear approach allows to smooth the counting signal while maintaining a fast response when brutal change activity occur. The filter has been improved by the implementation of a Brown's double Exponential Smoothing (BES). The filter has been validated and compared to other state of the art smoothing filters. The CST-BES filter shows a significant improvement compared to all tested smoothing filters. (authors)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A Roadmap for NEAMS Capability Transfer

The vision of the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program is to bring truly predictive modeling and simulation (M&S) capabilities to the nuclear engineering community in order to enable a new approach to the design and analysis of nuclear energy systems. From its inception, the NEAMS program has always envisioned a broad user base for its software and scientific products, including researchers within the DOE complex, nuclear industry technology developers and vendors, and operators. However activities to date have focused almost exclusively on interactions with NEAMS sponsors, who are also near-term users of NEAMS technologies. The task of the NEAMS Capability Transfer (CT) program element for FY2011 is to develop a comprehensive plan to support the program's needs for user outreach and technology transfer. In order to obtain community input to this plan, a 'NEAMS Capability Transfer Roadmapping Workshop' was held 4-5 April 2011 in Chattanooga, TN, and is summarized in this report. The 30 workshop participants represented the NEAMS program, the DOE and industrial user communities, and several outside programs. The workshop included a series of presentations providing an overview of the NEAMS program and presentations on the user outreach and technology transfer experiences of (1) The Advanced Simulation and Computing (ASC) program, (2) The Standardized Computer Analysis for Licensing Evaluation (SCALE) project, and (3) The Consortium for Advanced Simulation of Light Water Reactors (CASL), followed by discussion sessions. Based on the workshop and other discussions throughout the year, we make a number of recommendations of key areas for the NEAMS program to develop the user outreach and technology transfer activities: (1) Engage not only DOE, but also industrial users sooner and more often; (2) Engage with the Nuclear Regulatory Commission to facilitate their understanding and acceptance of NEAMS approach to predictive M&S; (3) Place requirements gathering from prospective users on a more formal footing, updating requirements on a regular basis and incorporate them into planning and execution of the project in a traceable fashion; (4) Seek out the best available data for validation purposes, and work with experimental programs to design and carry out new experiments that satisfy the need for data suitable for validation of high-fidelity M&S codes; (5) Develop and implement program-wide plans and policies for export control, licensing, and distribution of NEAMS software products; (6) Establish a program of sponsored alpha testing by experienced users in order to obtain feedback on NEAMS codes; (7) Provide technical support for NEAMS software products; (8) Develop and deliver documentation, tutorial materials, and live training classes; and (9) Be prepared to support outside users who wish to contribute to the codes.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

AGR-2 Daily As-run Thermal Analyses

This report documents the daily as-run thermal analyses performed on Advanced Gas-cooled Reactor (AGR) experiment AGR-2 in the Advanced Test Reactor (ATR) for capsules 2,3,5, and 6. Capsule 1 (French) results are in Appendix F, while Capsule 4 (South African) results are in Appendix G. Appendix F, and G are separate documents Several fuel and material irradiation experiments, which support the development of the Next Generation Nuclear Plant (NGNP), are planned for the Advanced Gas Reactor Fuel Development and Qualification Program. The goals of these experiments are to provide irradiation performance data to support fuel process development, to qualify fuel for normal operating conditions, to support development and validation of fuel performance and fission product transport models and codes, and to provide irradiated fuel and materials for post-irradiation examination (PIE) and safety testing. AGR-2 was the second in this series of planned experiments to test tristructural-isotropic (TRISO)-coated, low enriched uranium oxycarbide (LEUCO) fuel. The AGR-2 experiment was intended to serve as a follow-on to the AGR-1 experiment. The AGR-2 experiment is a high temperature fuel particle test. The test train planned for AGR-2 is based on the experience gained from previous irradiations in the ATR, using instrumented lead experiments. Instrumented lead experiments are used for irradiations requiring a controlled environment and monitored parameters. The experiment test train positions the fuel within the test location and contains sweep gas lines and thermocouple wiring that is routed through access ports to external support systems. The AGR-2 experiment is comprised of six individual capsules, approximately 1.375-in. in diameter by 6-in. long, stacked on top of each other to form the test train. Each capsule contains 12 fueled compacts that are approximately 0.5-in. in diameter by 1-in. long. The compacts are composed of fuel particles bound together by a carbon matrix. Each compact contains approximately 4,150 fissile particles (35 vol% particle packing fraction). Each capsule will be supplied with a flowing helium/neon gas mixture to control the test temperature and to sweep any fission gases that are released to the fission product monitoring system. Temperature control is accomplished by adjusting the gas mixture ratio of the two gases (helium and neon) with differing thermal conductivities. Many similarities exist between this thermal analysis for AGR-2 with the AGR-1 daily as-run report in [1]. Gas gaps were taken from as built drawings in Reference [2]. The finite element heat transfer code ABAQUS [3] was used to perform the thermal analysis. The AGR-2 experiment was placed in the B-12 position in the ATR core as shown in Figure 1. The AGR-2 experiment capsule assembly consists of six capsules axially stacked. Each capsule contains a graphite holder with three equally spaced fuel compact holder openings as shown in Figure 2. Each holder opening accommodates four axially stacked fuel compacts. Thus, each capsule has three stacks by four fuel compacts per stack for a total of 12 fuel compacts per capsule. So, within the entire AGR-2 experiment capsule assembly, there are six capsules by 12 fuel compacts per capsule for a total of 72 fuel compacts. Six finite element heat transfer models were created (one for each capsule), each with a corresponding gas gap.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Efficient learning of accurate surrogates for simulations of complex systems

Machine learning methods are increasingly deployed to construct surrogate models for complex physical systems at a reduced computational cost. However, the predictive capability of these surrogates degrades in the presence of noisy, sparse or dynamic data. Here, we introduce an online learning method empowered by optimizer-driven sampling that has two advantages over current approaches: it ensures that all local extrema (including endpoints) of the model response surface are included in the training data, and it employs a continuous validation and update process in which surrogates undergo retraining when their performance falls below a validity threshold. We find, using benchmark functions, that optimizer-directed sampling generally outperforms traditional sampling methods in terms of accuracy around local extrema even when the scoring metric is biased towards assessing overall accuracy. Finally, the application to dense nuclear matter demonstrates that highly accurate surrogates for a nuclear equation-of-state model can be reliably autogenerated from expensive calculations using few model evaluations.

79 ASTRONOMY AND ASTROPHYSICS↗

Evaluation of Fractional Regional Ventilation Using 4D-CT and Effects of Breathing Maneuvers on Ventilation

Purpose: Current implementations of methods based on Hounsfield units to evaluate regional lung ventilation do not directly incorporate tissue-based mass changes that occur over the respiratory cycle. To overcome this, we developed a 4-dimensional computed tomography (4D-CT)-based technique to evaluate fractional regional ventilation (FRV) that uses an individualized ratio of tidal volume to end-expiratory lung volume for each voxel. We further evaluated the effect of different breathing maneuvers on regional ventilation. The results from this work will help elucidate the relationship between global and regional lung function. Methods and Materials: Eight patients underwent 3 sets of 4D-CT scans during 1 session using free-breathing, audiovisual guidance, and active breathing control. FRV was estimated using a density-based algorithm with mass correction. Internal validation between global and regional ventilation was performed by use of the imaging data collected during the use of active breathing control. The impact of breathing maneuvers on FRV was evaluated comparing the tidal volume from 3 breathing methods. Results: Internal validation through comparison between the global and regional changes in ventilation revealed a strong linear correlation (slope of 1.01, R{sup 2} of 0.97) between the measured global lung volume and the regional lung volume calculated by use of the “mass corrected” FRV. A linear relationship was established between the tidal volume measured with the automated breathing control system and FRV based on 4D-CT imaging. Consistently larger breathing volumes were observed when coached breathing techniques were used. Conclusions: The technique presented improves density-based evaluation of lung ventilation and establishes a link between global and regional lung ventilation volumes. Furthermore, the results obtained are comparable with those of other techniques of functional evaluation such as spirometry and hyperpolarized-gas magnetic resonance imaging. These results were demonstrated on retrospective analysis of patient data, and further research using prospective data is under way to validate this technique against established clinical tests.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

A cellular automaton method to simulate the microstructure and evolution of low-enriched uranium (LEU) U–Mo/Al dispersion type fuel plates

Low-enriched uranium (LEU) fuel plates for high power materials test reactors (MTR) are composed of nominally spherical uranium-molybdenum (U-Mo) particles within an aluminum matrix. Fresh U-Mo particles typically range between 10 and 100 mu m in diameter, with particle volume fractions up to 50%. As the fuel ages, reaction-diffusion processes cause the formation and growth of interaction layers that surround the fuel particles. The growth rate depends upon the temperature and radiation environment. The cellular automaton algorithm described in this paper can synthesize realistic random fuel-particle structures and simulate the growth of the intermetallic interaction layers. Examples in the present paper pack approximately 1000 particles into three-dimensional rectangular fuel structures that are approximately 1 mm on each side. The computational approach is designed to yield synthetic microstructures consistent with images from actual fuel plates and is validated by comparison with empirical data on actual fuel plates. (C) 2014 Elsevier B.V. All rights reserved.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Abel transform analysis of ion storage ring imaging data

In this paper a new approach to analyze dissociative recombination product distance distributions measured at ion storage rings is presented. This approach is based on an Abel transform and the validity is demonstrated for the imaging data obtained from the CRYRING experiments on the dissociative recombination of H{sub 2}{sup +} and CO{sup +}. The reported method is generally valid for the data analysis of high resolution merged beams experiments such as DESIREE where isotropic fragment distributions can be expected.

43 PARTICLE ACCELERATORS↗

{alpha}-cluster structure above doubly closed shells in a generalized density-dependent cluster model

An extension of the generalized density-dependent cluster model (GDDCM) is presented to study {alpha}-cluster structure above doubly closed shells. In all cases, the microscopic {alpha}-core potential is numerically constructed in the double-folding model with CDM3Y6 nucleon-nucleon interactions plus proton-proton Coulomb interactions. The properties of intraband E2 transitions and {alpha} decays are calculated by the exact solution of the Schroedinger equation with appropriate boundary conditions. It is found that the enhanced B(E2) transition strengths are well reproduced without any effective charge and the calculations of {alpha}-decay properties show good agreement with the available experimental data. This indicates that the GDDCM has universal applicability and equal validity regardless of whether the {alpha}-cluster states are in light or heavy nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

SU-E-J-161: Inverse Problems for Optical Parameters in Laser Induced Thermal Therapy

Purpose: Magnetic resonance-guided laser-induced thermal therapy (MRgLITT) is investigated as a neurosurgical intervention for oncological applications throughout the body by active post market studies. Real-time MR temperature imaging is used to monitor ablative thermal delivery in the clinic. Additionally, brain MRgLITT could improve through effective planning for laser fiber's placement. Mathematical bioheat models have been extensively investigated but require reliable patient specific physical parameter data, e.g. optical parameters. This abstract applies an inverse problem algorithm to characterize optical parameter data obtained from previous MRgLITT interventions. Methods: The implemented inverse problem has three primary components: a parameter-space search algorithm, a physics model, and training data. First, the parameter-space search algorithm uses a gradient-based quasi-Newton method to optimize the effective optical attenuation coefficient, μ-eff. A parameter reduction reduces the amount of optical parameter-space the algorithm must search. Second, the physics model is a simplified bioheat model for homogeneous tissue where closed-form Green's functions represent the exact solution. Third, the training data was temperature imaging data from 23 MRgLITT oncological brain ablations (980 nm wavelength) from seven different patients. Results: To three significant figures, the descriptive statistics for μ-eff were 1470 m{sup −1} mean, 1360 m{sup −1} median, 369 m{sup −1} standard deviation, 933 m{sup −1} minimum and 2260 m{sup −1} maximum. The standard deviation normalized by the mean was 25.0%. The inverse problem took <30 minutes to optimize all 23 datasets. Conclusion: As expected, the inferred average is biased by underlying physics model. However, the standard deviation normalized by the mean is smaller than literature values and indicates an increased precision in the characterization of the optical parameters needed to plan MRgLITT procedures. This investigation demonstrates the potential for the optimization and validation of more sophisticated bioheat models that incorporate the uncertainty of the data into the predictions, e.g. stochastic finite element methods.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Determining the Activation Network of Stainless Steel in Different Neutron Energy Regimes and Decay Scenarios Using Foil Activation Experiments and FISPACT-II Calculations

Here, the activation network of stainless steel grade 304 was investigated using foil activation experiments from two neutron sources, along with FISPACT-II calculations. A critical assembly and d+Be converter were used as neutron sources to cover different neutron energy ranges. Experimental production rates were compared against calculated values from FISPACT-II in order to validate neutron energy distributions and assess available cross-section data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The Impact of the Halden Reactor Project on the Development of the Bison Fuel Performance Code

The Bison fuel performance code has been under development at Idaho National Laboratory by various programs within the U.S. Department of Energy since 2009. As part of any fuel performance code development, validation is necessary. To this end, several Halden experiments have been used. Early on, the focus was on validating the thermal mechanical behaviour, including pellet cladding mechanical interaction and fission gas release models implemented in Bison. Support for design-basis accident capabilities began in approximately 2014. Also in 2014, the development of models for accident tolerant fuel (ATF) concepts also began. This includes dopedUO2 fuel for which Halden has some experiments with temperature and fission gas release measurements. The Bison team has been fortunate to have two senior developers be secondees to Halden for a year: the late Dr. Giovanni Pastore from May 2015 to April 2016 and the now retired Dr. Richard Williamson in 2018. The paper will provide examples of Bison validation using Halden data for standard UO2 fuel under normal operation and loss-of-coolant accident condition, and ATF concepts. A tribute to the legacy that both the late Giovanni and retired Richard left on the Bison code is provided.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Development of Criticality Safety Validation Guidance for NRC-Regulated Activities

Some guidance documents support validation of criticality safety evaluations for many system types, and some accommodate different regulators or regulatory requirements. While these reports address specific applications, no single document applies to all systems and incorporates both traditional and sensitivity/uncertainty-based validation techniques. Oak Ridge National Laboratory will develop a single reference report for the US Nuclear Regulatory Commission (NRC) that provides modern examples and suggested recommendations for a uniform approach for performing and documenting k eff calculation validations applicable to any system containing fissile material. The project will include a literature review and development of a new, comprehensive NUREG/CR document on nuclear criticality safety validation. The NUREG will address the following experiences from recent reviews: 1. Inappropriate critical experiment selection 2. Insufficient trending analysis 3. Incorrectly calculated 95/95 uncertainties 4. Failure to address how validation applies to safety analysis 5. Lack of goodness-of-fit testing in trending analyses 6. Incorrect use of commercial reactor critical data 7. Failure to meet bias determination methodology prerequisites 8. Inappropriate extrapolation of bias and uncertainty 9. Failure to identify validation analysis gaps and weaknesses 10. Inadequate validation analysis documentation the final report will provide guidance on use of trending analysis results, acceptable confidence levels for normality testing and trending analysis, management of validation analysis gaps and weaknesses, use of sensitivity and uncertainty analysis in validation analysis, and potential impact of correlations among critical experiments used in validation. It will also consolidate existing guidance documents using both traditional and sensitivity/uncertainty-based approaches. This document will support NRC-regulated activities, as well as validation used in criticality safety within other regulatory frameworks.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Evolving data standards for cryo-EM structures

Electron cryo-microscopy (cryo-EM) is increasingly being used to determine 3D structures of a broad spectrum of biological specimens from molecules to cells. Anticipating this progress in the early 2000s, an international collaboration of scientists with expertise in both cryo-EM and structure data archiving was established (EMDataResource, previously known as EMDataBank). The major goals of the collaboration have been twofold: to develop the necessary infrastructure for archiving cryo-EM-derived density maps and models, and to promote development of cryo-EM structure validation standards. We describe how cryo-EM data archiving and validation have been developed and jointly coordinated for the Electron Microscopy Data Bank and Protein Data Bank archives over the past two decades, as well as the impact of evolving technology on data standards. Just as for X-ray crystallography and nuclear magnetic resonance, engaging the scientific community via workshops and challenging activities has played a central role in developing recommendations and requirements for the cryo-EM structure data archives.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Generation of the Thermal Scattering Law of Uranium Dioxide with Ab Initio Lattice Dynamics to Capture Crystal Binding Effects on Neutron Interactions

Scattering of thermal neutrons and Doppler broadening of epithermal neutron resonances in uranium and its compounds may be sensitive to crystal binding. The thermal scattering law (TSL) for uranium dioxide, which captures crystal binding effects, has been reevaluated for ENDF/B-VIII.0. Phonon spectra were generated using ab initio lattice dynamics for the paramagnetic phase and validated against experiment. Improved agreement with the Debye-Waller coefficient as a function of temperature is found relative to the spectrum used for the ENDF/B-VII.1 evaluation. The TSL was generated using the phonon expansion method within the NJOY nuclear data processing package and was found to be in reasonable agreement with inelastic neutron scattering measurements. The present evaluation predicts a reduction in the inelastic scattering cross section relative to ENDF/B-VII.1 and a total scattering cross section consistent with neutron transmission experiments

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗