Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural reliability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Multiple objective optimization in reliability demonstration test

Reliability demonstration tests are usually performed in product design or validation processes to demonstrate whether a product meets specified requirements on reliability. For binomial demonstration tests, the zero-failure test has been most commonly used due to its simplicity and use of minimum sample size to achieve an acceptable consumer’s risk level. However, this test can often result in unacceptably high risk for producers as well as a low probability of passing the test even when the product has good reliability. This paper explicitly explores the interrelationship between multiple objectives that are commonly of interest when planning a demonstration test and proposes structured decision-making procedures using a Pareto front approach for selecting an optimal test plan based on simultaneously balancing multiple criteria. Different strategies are suggested for scenarios with different user priorities and graphical tools are developed to help quantify the trade-offs between choices and to facilitate informed decision making. As a result, potential impacts of some subjective user inputs on the final decision are studied to offer insights and useful guidance for general applications.

97 MATHEMATICS AND COMPUTING↗

Designing alloys with process-mapping AI pre-trained on empirical knowledge

<span style="font-family: Calibri, sans-serif; font-size: 12pt;">Accelerated materials design should match the recent trends in the product development cycles. Materials data analytics can be used to significantly shorten development time of specialized alloys needed for next generation energy applications. However, it faces a challenge of scarce data available for training ML models. Incorporation of the domain knowledge into deep-learning graph structure via fuzzy pre-training and causal process imitation presents a viable approach to developing accurate data-driven models and reliable alloy design tools, with limited datasets. Artificial Intelligence (AI) was used in this study to incorporate such knowledge in the domain-specific computational tool, pyroMind. The tool provides not only novel design ideas but also their interpretation via physics and engineering concepts.</span>

Romanov, Vyacheslav↗

Physics-informed, empirically constrained machine learning for designing Fe-9Cr alloys

<span style="font-family: Calibri, sans-serif; font-size: 12pt;">Materials data analytics can be used to significantly shorten development time of specialized alloys needed for next generation energy applications. Incorporation of the domain knowledge into deep-learning graph structure via fuzzy pre-training and causal process imitation presents a viable approach to developing accurate data-driven models and reliable alloy design tools, with limited datasets. It was demonstrated that the domain knowledge-based empirical constraints not only inhibit overfitting but also allow training more accurate and reliable ML models with improved transparency of the output interpretation. In this study, alloy tensile properties were interpreted with three competing virtual-microstructure models.</span>

Romanov, Vyacheslav↗

Crystal structure and dynamical properties of a new tellurite: AgTlTeO{sub 3}

The structure of a newly synthesized AgTlTeO{sub 3} crystalline compound has been solved from single crystal X-ray diffraction data and refined to a final reliability factor R1 = 0.037. It was found having an orthorhombic Iba2 space group symmetry with unit cell parameters a = 14.708(7) A, b = 10.745(6) A, c = 5.166(3) A, Z = 8. Its lattice is divided into separated AgTlTeO{sub 3} sheets parallel to [0 1 0] which are formed by TeO{sub 3} pyramids, TlO{sub 4} disphenoids and AgO{sub 6} octahedra sharing either corners or edges. At the same time, from the crystal chemistry point of view, it can be classified as a typical island-type compound made up from molecular-like [TeO{sub 3}]{sup 2-} ortho-anions weakly connected with Ag{sup +} and Tl{sup +} cations. The vibrational spectra and their interpretations complemented by the calculated elastic properties confirm this classification. The model-estimated piezoelectric constants allow characterizing AgTlTeO{sub 3} as a strong pyroelectric structure.

36 MATERIALS SCIENCE↗

Electric Drive Technologies Consortium (EDTC)/ Cost competitive, high-Performance, highly Reliable (CPR) Power Devices on 4H-SiC (Final Report)

4H-Silicon carbide (4H-SiC) is a wide bandgap semiconductor that offers superior material properties over silicon, including higher critical electric field, thermal conductivity, and electron saturation velocity. These advantages make 4H-SiC highly attractive for high-voltage, high-efficiency power electronics. However, realizing the full potential of SiC requires device technologies that are not only high-performing but also manufacturable and reliable under real-world operating conditions. This report summarizes the outcomes of a five-year R&D effort funded by the U.S. Department of Energy (DOE) under the Electric Drive Technologies Consortium (EDTC), focused on developing cost-competitive, high-performance, and highly reliable (CPR) power devices on 4H-SiC substrates. The program targeted scalable and manufacturable 1.2 kV-class SiC MOSFETs optimized for next-generation electric vehicles, renewable energy systems, and industrial power conversion. The project delivered transformative advancements in SiC power device performance and ruggedness. Particularly, Specific on-resistance (R on,sp ) was reduced by up to 37%, from ~4.0 m$\Omega \cdot$cm 2 in earlier designs to an industry-leading 2.40 m$\Omega \cdot$cm 2 , driven by optimized doping, refined JFET widths, and layout engineering. Breakdown voltages (BV) exceeded 1600 V, marking improvement over legacy baselines, and demonstrating the robustness of newly implemented junction profiles and edge terminations. Short-circuit withstand time (SCWT) saw a remarkable 4$\times$ increase, from ~2 $\mu$s to over 8 $\mu$s, achieved through the successful deployment of deep P-well structures (~1.8–2.0 $\mu$m) via channeling implantation. This innovative process breakthrough enabled precise junction formation without MeV-class implantation tools, reduced leakage under high field stress, and allowed even the shortest-channel devices (down to 0.3 $\mu$m) to achieve both high BV and excellent ruggedness—breaking the traditional trade-off between conduction efficiency and blocking capability. Several novel architectures pushed the performance envelope further. JBSFETs—featuring embedded Schottky portions—eliminated bipolar degradation and drastically reduced third-quadrant leakage, while Ladder MOSFETs introduced a clever orthogonal conduction path that achieved a 15.4% reduction in R on,sp over standard linear designs. Switching performance reached new benchmarks: short-channel devices showed a 31% reduction in total switching energy compared to 0.5 $\mu$m counterparts, while maintaining manageable gate drive requirements. Layout-optimized structures not only improved transconductance but also accelerated switching transitions, pointing to real-world benefits in converter-level efficiency. The devices also passed rigorous reliability validation. Stress-tested across TDDB, HTGB, HTRB, HVP, and burn-in, the devices screened under 30 V/10 hr and 43 V/1 s protocols consistently exhibited tighter lifetime distributions and long-term oxide robustness. These screening techniques proved effective in identifying latent defects and ensuring deployment-grade reliability. Meanwhile, advanced 3D TCAD simulations revealed and resolved electric field hotspots—particularly in HEXFET corners—where fields exceeding 4.8 MV/cm were mitigated through geometry-aware layout corrections. Overall, the results of this project demonstrate a manufacturable and scalable SiC power device platform that addresses key DOE performance targets for efficient, robust, and reliable 1.2kV 4H-SiC Power Devices. The developed technologies represent a meaningful step forward in the commercial readiness of high-voltage SiC solutions and provide a strong foundation for continued advancement in wide bandgap power electronics.

42 ENGINEERING↗

Data Analytics for Concrete Structural Health Monitoring in Nuclear Power Plants

Assessment and management of aging concrete structures in nuclear power plants require a more systematic approach than simple reliance on existing code margins of safety. Structural health monitoring of concrete structures aims to understand the current health condition of a structure based on heterogeneous measurements to produce high-confidence actionable information regarding structural integrity that supports operational and maintenance decisions. This ongoing research project is seeking to develop a probabilistic framework for health diagnosis and prognosis of aging concrete structures in a nuclear power plant that is subjected to physical, chemical, environment, and mechanical degradation. In this paper, experimental set up at Vanderbilt University’s Laboratory for Systems Integrity and Reliability is used to research effective combinations of full field techniques, which include infrared thermography, digital image correlation, and ultrasonic measurement. The full-field imaging data collected were processed using contour mapping technique to identify holes in a concrete slab. The techniques discussed and presented in this paper allow diagnosis of damage. The framework will enable plant operators to make risk informed decisions on the struc-tural integrity, remaining useful life, and performance of concrete structures.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

On the reliability of pulse power saturation models for broad-area GaAs-based lasers

With short current pulses, GaAs-based lasers can achieve high output powers if self-heating and catastrophic optical damage are suppressed. However, the pulse power is still severely limited by internal saturation mechanisms. Over the past decade, various power loss mechanisms have been identified by numerical laser simulation but published conclusions differ even for the same laser diode. We here investigate the reliability of such simulations and find that the error range remains relatively small if all saturation mechanisms are considered simultaneously in a self-consistent model, including a realistic hole mobility. Accurate pulse power predictions are demonstrated by simulating measurements on two different laser structures without making material parameter adjustments.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

TRACING THE PECULIAR DARK MATTER STRUCTURE IN THE GALAXY CLUSTER Cl 0024+17 WITH INTRACLUSTER STARS AND GAS

Intracluster light (ICL) is believed to originate from the stars stripped from cluster galaxies. They are no longer gravitationally bound to individual galaxies, but to the cluster, and their smooth distribution potentially makes them serve as much denser tracers of the cluster dark matter than the sparsely distributed cluster galaxies. We present our study of the ICL in the galaxy cluster Cl 0024+17 using both Advanced Camera for Surveys (ACS) and Subaru data, where we previously reported the discovery of a ring-like dark matter structure with gravitational lensing. The ACS images provide much lower sky levels than ground-based data, and enable us to measure relative variation of surface brightness reliably. This analysis is repeated with the Subaru images to examine if consistent features are recovered despite a different reduction scheme and different instrumental characteristics. We find that the ICL profile clearly resembles the peculiar mass profile, which stops decreasing at r {approx} 50'' ({approx}265 kpc) and slowly increases until it turns over at r {approx} 75'' ({approx}397 kpc). This feature is seen in both ACS and Subaru images for nearly all available passband images while the features are in general stronger in red filters. The consistency across different filters and instruments strongly rules out the possibility that the feature might come from any residual, uncorrected calibration errors. In addition, our re-analysis of the cluster X-ray data shows that the peculiar mass structure is also indicated by a non-negligible (3.7{sigma} in Chandra and 2.4{sigma} in XMM-Newton) bump in the intracluster gas profile when the geometric center of the dark matter ring, not the peak of the X-ray emission, is chosen as the center of the radial bin. The location of the gas ring is closer to the center by {approx}15'' ({approx}80 kpc), raising an interesting possibility that the ring-like structure is expanding and the gas ring is lagging behind perhaps because of the ram pressure if both features in mass and gas share the same dynamical origin.

79 ASTRONOMY AND ASTROPHYSICS↗

Challenges of standard halo models in constraining galaxy properties from cosmic infrared background anisotropies

The halo model, combined with halo occupation distribution (HOD) prescriptions, is widely used to interpret cosmic infrared background (CIB) anisotropies and extract physical information about star-forming galaxies and their connection to large-scale structures. Recent CIB-specific implementations of the halo model have adopted more physical parameterizations. However, the extent to which these models can reliably recover meaningful physical parameters remains uncertain. We assessed whether the current parameterization of CIB halo models is sufficient to recover astrophysical quantities, such as star formation efficiency, η(M h , z), and halo mass at which the peak of star formation efficiency occurs, M max , when fit to mock data. We also assessed whether discrepancies arise from assumptions about galaxy emission (the HOD ingredients) or from more fundamental components in the halo model, such as bias and matter clustering. We fit the M21 CIB HOD model, implemented within the halo model framework, to mock CIB power spectra and star formation rate density (SFRD) data generated from the SIDES-Uchuu simulation, and compared the best-fit parameters to the known simulation inputs. We then repeated the analysis using a simplified version of the simulation (SSU), explicitly designed to match the HOD assumptions. A detailed comparison of model and simulation outputs was carried out to trace the origin of observed discrepancies. While the M21 HOD model provides a good fit to the mock data, it failed to recover the intrinsic parameters accurately, particularly the halo mass at which star formation efficiency peaks. This mismatch persists even when fitting data generated with the same model assumptions. We find strong agreement (within 5%) in the emission-related components (SFRD, emissivity), but observe a scale- and redshift-dependent offset exceeding 20% in the two-halo term of the CIB power spectrum. This likely arises from limitations in the treatment of halo bias and matter clustering within the linear approximation. Additionally, incorporating scatter in the SFR–halo mass relation and the spectral energy distribution (SED) templates significantly affects the shot noise (∼50%), but has only a modest impact (less than 10%) on the clustered component. These results suggest that recovering physical parameters from CIB clustering requires improvements to the cosmological ingredients of the halo model framework, such as adopting scale-dependent halo bias and nonlinear matter power spectra in addition to careful modeling of emission physics.

cosmic background radiation↗

Molecular simulation using transfer-learned potentials for the disordered nanoscale structure of nitrogen-doped nanoporous carbons

Machine learning (ML)-based molecular dynamics (MD) simulations of the formation of a class of N-doped nanoporous carbons are performed to assess their disordered partially graphitized nanoscale structure. The study is motivated by the effectiveness of so-called nitrogen assembly carbons (NACs) for catalysis applications. Benchmark simulations for pure-C disordered graphitic systems reveal the importance of reliably capturing the vdW component of the potentials in order to accurately describe the tendency for layering of disordered graphene-like sheets. In our modeling, this is achieved by a transfer learning strategy incorporating features of the energetics from the optB88-vdW DFT functional into potentials initially trained with a less expensive functional, thereby providing a superior description of the pure-C systems. Generation from MD simulations of realistic partially graphitized structures is significantly more challenging for N-doped versus for pure C systems. However, such structures are achieved by a tailored MD simulation protocol mimicking the experimental synthesis process and in particular incorporating an annealing and subsequent quenching stages. Simulated PXRD patterns effectively reproduce the features of experimental observations for NACs, including the appearance of a prominent but broad (002) peak at around 25, and the development of another weaker feature associated with in-layer ordering of mixed C-N graphene-like sheets.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding Processes Controlling the Temporal and Spatial Variations of PBL Structures Over the ARM SGP Site

The surface heat, moisture, and momentum fluxes are transferred to the atmosphere above through the planetary boundary layer (PBL), where vertical mixing due to turbulent eddies of different sizes plays critical roles. Therefore, reliably representing PBL processes in numerical models is critical for weather, climate, and air quality prediction. Currently, there are over ten PBL schemes that are selectable within the advanced research version of the Weather Research and Forecasting (WRF) model, indicative of the challenges in capturing the impacts of turbulence within the PBL in models. Further improvements in PBL parameterizations are needed for both weather and climate models, as emphasized in many recent national reports, but require an advanced understanding of the underlying boundary layer processes from observations. This project takes advantage of Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) investments in the atmospheric boundary layer observations and Large-Eddy Simulation (LES) ARM Symbiotic Simulation and Observation (LASSO) simulations to characterize PBL structures, understand key physical processes controlling the mixed layer development, and to evaluate PBL parameterization.

54 ENVIRONMENTAL SCIENCES↗

SMATool: Strength of materials analysis toolkit

The study of the strength of materials is a cornerstone in material science and engineering, playing a critical role in shaping the progress and application of materials in diverse industrial sectors. The strength of a material is meticulously examined to understand the behavior of the material under different stress conditions and environments, thereby guiding material selection and structural design. Herein, we introduce the SMATool, a computational toolkit for the efficient calculation and analysis of material strength at both zero and finite temperatures for 3D, 2D, 1D, and tubular 2D-based nanostructures and nanotubes, as well as 1D nanoribbons. The toolkit is capable of calculating tensile, shear, ultimate, yield, and indentation (Vickers' hardness) strengths in various dimensions, as well as the energy storage capacity. We conducted several calculations both at zero and finite temperatures to validate the accuracy and reliability of the developed software. Here, the results show that the SMATool package provides accurate predictions that align with existing data on material strength. SMATool integrates seamlessly with widely used electronic structure codes like VASP and Quantum Espresso, providing a user-friendly interface catering to academic researchers and industry professionals.

36 MATERIALS SCIENCE↗

Cladding Attachment Over Thick Exterior Insulating Sheathing

The addition of insulation to the exterior of buildings is an effective means of increasing the thermal resistance of both wood framed walls as well as mass masonry wall assemblies. For thick layers of exterior insulation (levels greater than 1.5 inches), the use of wood furring strips attached through the insulation back to the structure has been used by many contractors and designers as a means to provide a convenient cladding attachment location (Straube and Smegal 2009, Pettit 2009, Joyce 2009, Ueno 2010). The research presented in this report is intended to help develop a better understanding of the system mechanics involved and the potential for environmental exposure induced movement between the furring strip and the framing. BSC sought to address the following research questions: 1. What are the relative roles of the mechanisms and the magnitudes of the force that influence the vertical displacement resistance of the system? 2. Can the capacity at a specified deflection be reliably calculated using mechanics based equations? 3. What are the impacts of environmental exposure on the vertical displacement of furring strips attached directly through insulation back to a wood structure?

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Choice of APCS for NPP Based on a Set of Reliability and Risk Criteria

The normative documents for calculating reliability and risk indices when designing and operating APCS are analyzed. The primary groups of standards concerning reliability and risk are examined. It is concluded that the basic criteria for choosing and validating the use of APCS equipment for NPPs need to be reexamined. A set of indices which are expedient for describing automation systems, validating the choice of structure, and using specifi c equipment is formulated on the basis of the analysis.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Cooperation Reliability Testing of the Clipper Windpower Liberty 2.5 MW Turbine: Cooperative Research and Development Final Report

Clipper Windpower (CWP) has developed the Liberty 2.5 MW wind turbine. The development, manufacturing, and certification process depends heavily on being able to validate the full-scale system design and performance under load in both an accredited structural test facility and through accredited field testing. CWP requested that DOE/ NREL upgrade blade test capabilities to perform a scope of workincluding structural testing of the C-96 blade used on the CWP Liberty turbine. This funds-in CRADA was developed to upgrade NREL blade test capability, while enabling certification testing of the C-96 blade through the facility and equipment upgrades. NREL shared resource funds were used to develop hardware necessary to structurally attach a large wind turbine to the test stand at the NWTC.Participant funds-in monies were used for developing the test program.

17 WIND ENERGY↗

Structural and electrical characterization of thick GaN layers on Si, GaN, and engineered substrates

A major challenge in gallium nitride (GaN) vertical power devices and other large bandgap materials is the high defect density that compromises the performance, reliability, and yield. Defects are typically nucleated at the heterointerface where there are both lattice and thermal mismatches. In this paper, we report the selective area growth (SAG) of thick GaN on Si and on the newly available Qromis Substrate Technology™ (QST) substrates that lead to a significant reduction of the defect densities to a level that is nearly comparable to that on native substrates by defect annihilation. We performed a parametric study of the electrical properties of the SAG GaN layers by fabricating and characterizing Schottky barrier diodes for SAG GaN layer thicknesses of 5, 10, 15, and 20 μm for GaN-on-Si, GaN-on-QST, and GaN-on-GaN diodes. While thicker layers led to a significant reduction in defect densities and improvement in the diode forward current characteristics, the GaN-on-QST diodes exhibited nearly similar characteristics to the GaN-on-GaN diodes. Further improvement in the device structure and/or SAG growth for GaN-on-Si is needed to achieve a comparable performance as the defect densities in the GaN-on-Si are comparable to that of GaN-on-QST substrates.

36 MATERIALS SCIENCE↗

ARM SGP PBLH and MLH datasets from Raman lidar and Doppler lidar

The planetary boundary layer (PBL) plays a critical role in the atmosphere by transferring heat, moisture, and momentum. The warm PBL has a distinct diurnal cycle including the daytime convective mixing layer (ML) and nighttime residual layer developments. Thus, simultaneous determinations of PBL height (PBLH) and ML height (MLH) are necessary for studying PBL characterization and processes. Here, new approaches are developed to provide reliable PBLH and MLH estimates to characterize warm PBL evolution. The approaches use Raman lidar (RL) water vapor mixing ratio (WVMR) and Doppler lidar (DL) vertical velocity measurements at the Southern Great Plains (SGP) atmospheric observatory, which was established by the Atmospheric Radiation Measurement (ARM) User Facility. Compared to widely used lidar aerosol measurements for PBLH, WVMR is a better tracer for PBL vertical mixing. For PBLH, the approach classifies PBL water vapor structures into a few general patterns, then uses a slope method and dynamic threshold method to determine PBLH. For MLH, wavelet analysis is used to reconstruct 2D variance from DL vertical wind velocity measurements according to the turbulence eddy size to minimize the impacts of gravity wave and eddy size on variance calculations; then, a dynamic threshold method is used to determine MLH. Remotely-sensed PBLHs and MLHs are compared with radiosonde measurements based on the Richardson number method. Good agreements between them confirm that the proposed new algorithms are reliable for PBLH and MLH characterization. The algorithms are applied to warm-season RL and ML measurements at the SGP site for five years to study warm-season PBL structure and processes. The weekly composited diurnal evolutions of PBLHs and MLHs in a warm climate were provided to illustrate diurnal and seasonal PBL evolutions. This reliable data set of PBLH and MLH values will be valuable for studying PBL processes, model evolution, and PBL parameterization improvements. The MLH dataset includes the MLH in values of km above ground level. The PBLH dataset includes the PBLH in values of km above ground level, along with a flag ("situation_PBLH") to determine the state of the PBL (1 = Cloudy Condition, 2 = Stable Layer, 3 = Multi-layer WVMR structure, 4 = Well-Mixed PBL, 5 = A de-coupled layer, 6 = Other).

mixing layer height↗

Improve earthquake hypocenter using adaptive simulated annealing inversion in regional tectonic, volcano tectonic, and geothermal observation

Observation of earthquakes is routinely used widely in tectonic activity observation, and also in local scale such as volcano tectonic and geothermal activity observation. It is necessary for determining the location of precise hypocenter which the process involves finding a hypocenter location that has minimum error between the observed and the calculated travel times. When solving this nonlinear inverse problem, simulated annealing inversion method can be applied to such global optimization problems, which the convergence of its solution is independent of the initial model. In this study, we developed own program codeby applying adaptive simulated annealing inversion in Matlab environment. We applied this method to determine earthquake hypocenter using several data cases which are regional tectonic, volcano tectonic, and geothermal field. The travel times were calculated using ray tracing shooting method. We then compared its results with the results using Geiger’s method to analyze its reliability. Our results show hypocenter location has smaller RMS error compared to the Geiger’s result that can be statistically associated with better solution. The hypocenter of earthquakes also well correlated with geological structure in the study area. Werecommend using adaptive simulated annealing inversion to relocate hypocenter location in purpose to get precise and accurate earthquake location.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗