Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface layering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Influence of Processing Techniques on the Surface Microstructure of V{sub 85}Ni{sub 15} Membrane Alloy

Vanadium-based alloys with a BCC structure are considered to be an alternative to palladium alloys for hydrogen purification. Since the performance of membranes is influenced by not only their bulk characteristics but also their surface condition, we have investigated the effect of different surface preparation techniques (abrasive grinding and polishing, electrolytic polishing, and ion etching) on the surface microstructure of V{sub 85}Ni{sub 15} membrane alloy using X-ray photoelectron spectroscopy. After electrolytic polishing and ion etching, we observed an increase in the percentages of vanadium and nickel metals in the surface layer of the alloy in comparison with its state after abrasive polishing. Such changes are expected to be favorable for an increase in the rate of hydrogen dissociation and recombination on the surface of the membrane material, eventually improving hydrogen transport efficiency.

36 MATERIALS SCIENCE↗

Coupling Aerosol-Cloud-Radiative Processes in the WRF-Chem Model: Investigating the Radiative Impact of Elevated Point Sources

The local and regional influence of elevated point sources on summertime aerosol forcing and cloud-aerosol interactions in northeastern North America was investigated using the WRF-Chem community model. The direct effects of aerosols on incoming solar radiation were simulated using existing modules to relate aerosol sizes and chemical composition to aerosol optical properties. Indirect effects were simulated by adding a prognostic treatment of cloud droplet number and adding modules that activate aerosol particles to form cloud droplets, simulate aqueous phase chemistry, and tie a two-moment treatment of cloud water (cloud water mass and cloud droplet number) to an existing radiation scheme. Fully interactive feedbacks thus were created within the modified model, with aerosols affecting cloud droplet number and cloud radiative properties, and clouds altering aerosol size and composition via aqueous processes, wet scavenging, and gas-phase-related photolytic processes. Comparisons of a baseline simulation with observations show that the model captured the general temporal cycle of aerosol optical depths (AODs) and produced clouds of comparable thickness to observations at approximately the proper times and places. The model slightly overpredicted SO2 mixing ratios and PM2.5 mass, but reproduced the range of observed SO2 to sulfate aerosol ratios, suggesting that atmospheric oxidation processes leading to aerosol sulfate formation are captured in the model. The baseline simulation was compared to a sensitivity simulation in which all emissions at model levels above the surface layer were set to zero, thus removing stack emissions. Instantaneous, site-specific differences for aerosol and cloud related properties between the two simulations could be quite large, as removing above-surface emission sources influenced when and where clouds formed within the modeling domain. When summed spatially over the finest resolution model domain (the extent of which corresponds to the typical size of a single GCM grid cell) and temporally over a three day analysis period, total rainfall in the sensitivity simulation increased by 31% over that in the baseline simulation. Fewer optically thin clouds, arbitrarily defined as a cloud exhibiting an optical depth less than 1, formed in the sensitivity simulation. Domain-averaged AODs dropped from 0.46 in the baseline simulation to 0.38 in the sensitivity simulation. The overall net effect of additional aerosols attributable to primary particulates and aerosol precursors from point source emissions above the surface was a domain-averaged reduction of 5 W m-2 in mean daytime downwelling shortwave radiation.

54 ENVIRONMENTAL SCIENCES↗

Theoretical analysis of Al/x/Ga/1-x/As-GaAs graded band-gap solar cell

A practical theoretical analysis of an n/p graded band-gap Al(x)Ga(1-x)As-GaAs solar cell indicates that the presence of a built-in electric field acting on holes in the surface layer increases the hole collection efficiency of a nearly optimum cell to a maximum of 97.8%. The electric field is created by the band-gap gradient and serves to reduce the surface hole recombination by 97% and reduce the bulk hole recombination by 80%, compared to a similar GaAs cell. These reduced losses increase cell response substantially for wavelengths less than 0.59 micron and yield a maximum air-mass-zero efficiency of 17.7% (not corrected for a 13% front-surface contact). The model includes an optimized antireflection coating, series resistance, and junction-recombination current.

Hutchby, J. A.↗

Basalt depths in lunar basins using impact craters as stratigraphic probes: Evaluation of a method using orbital geochemical data

A rare look at the chemical composition of subsurface stratigraphy in lunar basins filled with mare basalt is possible at fresh impact craters. Mg/Al maps from orbital X-ray flourescence measurements of mare areas indicate chemical anomalies associated with materials ejected by large post-mare impacts. A method of constraining the wide-ranging estimates of mare basalt depths using the orbital MG/Al data is evaluated and the results are compared to those of investigators using different indirect methods. Chemical anomalies at impact craters within the maria indicate five locations where higher Mg/Al basalt compositions may have been excavated from beneath the surface layer. At eight other locations, low Mg/Al anomalies suggest that basin-floor material was ejected. In these two cases, the stratigraphic layers are interpreted to occur at depths less than the calculated maximum depth of excavation. In five other cases, there is no apparent chemical change between the crater and the surrounding mare surface. This suggests homogeneous basalt compositions that extend down to the depths sampled, i.e., no anorthositic material that might represent the basin floor was exposed.

Andre, C. G.↗

Calcium Sulfate and Calcium Carbonate Scaling of Thin-Film Composite Polyamide Reverse Osmosis Membranes with Surface-Tethered Polyacrylic Acid Chains

The gypsum and calcite scaling propensities of the thin-film composite polyamide (PA-TFC) reverse osmosis (RO) membrane, modified with a tethered surface layer of polyacrylic acid (PAA) chains, was evaluated and compared to the scaling of selected commercial RO membranes. The tethered PAA layer was synthesized onto a commercial polyamide membrane (i.e., base-PA) via atmospheric pressure plasma-induced graft polymerization (APPIGP). The PAA nano-structured (SNS) base-PA membrane (SNS-PAA-PA) was scaled to a lesser degree, as quantified by a lower permeate flux decline and surface imaging, relative to the tested commercial membranes (Dow SW30, Toray SWRO, and BWRO). The cleaning of gypsum-scaled membranes with D.I. water flushing achieved 100% water permeability recovery for both the SNS-PAA-PA and Dow SW30 membranes, relative to 92–98% permeability restoration for the Toray membranes. The calcium carbonate scaling of SNS-PAA-PA membranes was also lower relative to the commercial membranes, but permeability recovery after D.I. water cleaning was somewhat lower (94%) but consistent with the level of surface scale coverage. In contrast, the calcite and gypsum-scaled membrane areas of the commercial membranes post-cleaning were significantly higher than for the SNS-PAA-PA membrane but with 100% permeability recovery, suggesting the potential for membrane damage when mineral scaling is severe.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Study of polyelectrolyte complexes of chitosan and sulfoethyl cellulose

The complexing of polycation chitosan and polyanion sulphoethyl cellulose during the formation of polyelectrolyte simplex membranes using the layer-by-layer deposition of a solution of one polyion on a gel-like film of another one has been studied. The structural characteristics of the multilayer composites and their components have been analyzed by X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray microanalysis. A technique is proposed for studying the structure of surface layers of thin polymer films (15-20 {mu}m) using a portable DIFREI-401 diffractometer. It is shown that the sequence of layer deposition during the formation of membrane films does not affect their structural characteristics. The interaction between positively charged chitosan groups (-NH{sub 3}{sup +}) and negatively charged sulfoethyl cellulose groups (-SO{sub 3}{sup -}) during the growth of polyelectrolyte complexes results in a packing of chitosan chains in the multilayer film.

36 MATERIALS SCIENCE↗

Adsorption Properties of Au−Ni Surface Alloys with a Nonstoichiometric Moiré Structure: A Density Functional Theory Study

Due to the large lattice mismatch between gold and nickel, gold–nickel surface alloys can form unique nonstoichiometric overlayer structures characterized by a moiré pattern and subsurface defects. For this work, we performed density functional theory (DFT) calculations to study the adsorption of molecular oxygen, atomic hydrogen, and atomic carbon on a gold–nickel(111) surface alloy with 0.46 monolayer gold randomly distributed in the surface layer. We observed six distinct adsorption structures for molecular oxygen characterized by intramolecular stretching frequencies of <700, 729, 795, 857, 929, and 1004 cm –1 , which describe well the experimentally observed high-resolution electron energy-loss spectra. Surface atomic hydrogen adsorption is associated with adsorbate–surface modes in the ∼1000 cm –1 range, while subsurface hydrogen can have features as low as ∼400 cm –1 . We observed a unique adsorption structure for atomic carbon inside the surface dislocation loop defect, which explains the experimentally observed low carbon-surface mode at ∼340 cm –1 . Our study sheds light on the unique adsorption properties of the gold–nickel surface alloys and helps with rationalizing vibrational frequency experimental studies for this system.

adsorption↗

Structurally Driven Environmental Degradation of Friction in MoS2 Films

Abstract We report an investigation of the friction mechanisms of MoS 2 thin films under changing environments and contact conditions using a variety of computational and experimental techniques. Molecular dynamics simulations were used to study the effects of water and molecular oxygen on friction and bonding of MoS 2 lamellae during initial sliding. Characterization via photoelectron emission microscopy (PEEM) and Kelvin probe force microscopy (KPFM) were used to determine work function changes in shear modified material within the top few nanometers of MoS 2 wear scars. The work function was shown to change with contact conditions and environment, and shown by density functional theory (DFT) calculations and literature reports to be correlated with lamellae size and thickness of the basally oriented surface layer. Results from nanoscale simulations and macroscale experiments suggest that the evolution of the friction behavior of MoS 2 is linked primarily to the formation or inhibition of a basally oriented, molecularly thin surface film with long-range order.

Curry, John F.↗

Position from gravity

Procedures for obtaining position from surface gravity observations are reviewed and their relevance assessed in the context of the application of modern geodetic techniques to programs of Earth and ocean physics. Solutions based on the use of surface layer techniques, the discrete value approach, and the development from Green's theorem are stated in summary, the latter being extended to order e cubed in the height anomaly. The representation of the surface gravity field which is required in order that this accuracy may be achieved is discussed. Interim techniques which could be used in the absence of such a representation are also outlined.

Mather, R. S.↗

The implications and limitations of the findings of the Viking organic analysis experiment

The gas chromatograph mass spectrometer instrument of the Viking mission has demonstrated the absence of organic compounds in the immediate surface layer of the two landing sites. The demonstration of the successful operation of the instrument (comparison of ground-based test data with those obtained during interplanetary flight and the data from the surface of the planet) and its limitations (e.g., the detection of highly cross-linked polymers or polymeric carbon suboxide) are reviewed. The measurements for bound water are based on indirect data, the detectability of evolved carbon dioxide and ammonia is poor, and oxygen, liberated from the soil samples, can not be detected.

Biemann, K.↗

Emission lines in the long period Cepheid l Carinae

For the Cepheid (l) Carinae with a pulsation period of 35.5 days we have studied the emission line fluxes as a function of pulsational phase in order to find out whether we see chromosphere and transition layer emission or whether we see emission due to an outward moving shock. All emission lines show a steep increase in flux shortly before maximum light suggestive of a shock moving through the surface layers. The large ratio of the C IV to C II line fluxes shows that these are not transition layer lines. During maximum light the large ratio of the C IV to C II line fluxes also suggests that we see emission from a shock with velocities greater than 100 km/sec such that C IV emission can be excited. With such velocities mass outflow appears possible. The variations seen in the Mg II line profiles show that there is an internal absorption over a broad velocity band independent of the pulsational phase. We attribute this absorption to a circumstellar 'shell'. This 'shell' appears to be seen also as spatially extended emission in the O I line at 1300 angstrom, which is probably excited by resonance with Ly beta.

Boehm-Vitense, Erika↗

Diamond Smoothing Tools

Diamond smoothing tools have been proposed for use in conjunction with diamond cutting tools that are used in many finish-machining operations. Diamond machining (including finishing) is often used, for example, in fabrication of precise metal mirrors. A diamond smoothing tool according to the proposal would have a smooth spherical surface. For a given finish machining operation, the smoothing tool would be mounted next to the cutting tool. The smoothing tool would slide on the machined surface left behind by the cutting tool, plastically deforming the surface material and thereby reducing the roughness of the surface, closing microcracks and otherwise generally reducing or eliminating microscopic surface and subsurface defects, and increasing the microhardness of the surface layer. It has been estimated that if smoothing tools of this type were used in conjunction with cutting tools on sufficiently precise lathes, it would be possible to reduce the roughness of machined surfaces to as little as 3 nm. A tool according to the proposal would consist of a smoothing insert in a metal holder. The smoothing insert would be made from a diamond/metal functionally graded composite rod preform, which, in turn, would be made by sintering together a bulk single-crystal or polycrystalline diamond, a diamond powder, and a metallic alloy at high pressure. To form the spherical smoothing tip, the diamond end of the preform would be subjected to flat grinding, conical grinding, spherical grinding using diamond wheels, and finally spherical polishing and/or buffing using diamond powders. If the diamond were a single crystal, then it would be crystallographically oriented, relative to the machining motion, to minimize its wear and maximize its hardness. Spherically polished diamonds could also be useful for purposes other than smoothing in finish machining: They would likely also be suitable for use as heat-resistant, wear-resistant, unlubricated sliding-fit bearing inserts.

Voronov, Oleg↗

Interaction of Mineral Surfaces with Simple Carboxylic Acids In Aqueous And / or Solution In Hexane

DRIFTS was used to investigate the adsorption of simple carboxylic acids to the surface of kaolinite clay and to alumina. Dry powder samples were examined without evacuation or blending with KBr. It was possible to determine monolayer coverage of the organic on the mineral surface from analysis of the spectra. Resolution of peaks from the organic was possible for coverage as low as 0.02 molecules / nm2. Studies were done with adsorption from aqueous solution and or solution in hexane. It should be noted that under atmospheric conditions, mineral surfaces have a surface layer of water approximately 3 molecules thick. At sub monolayer coverage, spectral features of salicylic acid deposited on gamma-alumina from hexane were not distinguishable from those deposited from water. But, greater surface loading could be achieved with adsorption from the organic solvent (hexane)and new peaks were observed. Adsorption of salicylic acid , from solution in hexane , onto kaolinite was also possible. In almost all cases, spectral features associated with the carboxyl moiety were substantially altered, indicating a significant role in the adsorption mechanism. The results using hexane as solvent compared with water suggest that the surface adsorbed hydroxyl and molecular water, present on mineral oxides under ambient conditions, are a key determinant of molecular adsorbate architecture.

Thomas, Joan↗

Valence band structure of the icosahedral Ag-In-Yb quasicrystal

The valence band structure of the icosahedral (i) Ag-In-Yb quasicrystal, which is isostructural to the binary i-Cd-Yb system, is investigated by ultraviolet photoemission spectroscopy (UPS). Experimental results are compared with electronic-structure calculations of a cubic approximant of the same phase. UPS spectra from the fivefold, threefold, and twofold i-Ag-In-Yb surfaces reveal that the valence band near to the Fermi level is dominated by Yb 4f-derived states, in agreement with calculations. The spectra also exhibit peaks which are surface core level shifted, caused by changes in the electronic structure in surface layers. Calculations yield a pseudogap in the density of states due to a hybridization of the Yb 5d band with the Ag 5p and In 5p bands. Both experimental and calculated band features are very similar to those of Cd-Yb. The modification of the band structure after surface treatment by sputtering and by oxidation is also studied. Additionally, the work function of i-Ag-In-Yb measured from the width of UPS spectrum is found to be almost unaffected by surface orientation, but increases after sputtering or oxidation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Composition, Structure, and Semiconductor Properties of Chemically Deposited SnSe Films

Highly adhesive tin-monoselenide (SnSe) layers (200 ± 10) nm thick are grown by hydrochemical deposition from a trilonate reactive mixture. X-ray diffraction shows that the synthesized films crystallize in the orthorhombic system (space group Pnma). The significant oxygen content in the film surface layers is explained by the partial oxidation of samples with SnO{sub 2} phase formation. The results of ion etching to a depth of 18 nm show a sharp decrease in the oxygen content over thickness and real correspondence to the SnSe elemental composition. The band gap determined by optical studies for direct transitions is 1.69 eV. The synthesized SnSe layers exhibit p-type conductivity, which is characteristic of this material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DFT+U Study on the Localized Electronic States and Their Potential Role During H2O Dissociation and CO Oxidation Processes on CeO2(111) Surface

We present the results of an extensive density functional theory based electronic structure study of the role of 4f-state localized electron states in the surface chemistry of a partially reduced CeO2(111) surface. These electrons exist as polaronic states, residing of Ce3+ sites, which can be created by either the formation of oxygen vacancies, OV, or other surface defects. Via ab initio molecular dynamics these localized electrons are found to be able to move freely within the upper surface layer but penetration into the bulk is prohibited as a result of the higher elastic strain induced by creating a subsurface Ce3+ defect. We found that water molecules can be easily dissociated into two surface bound hydroxyls at the Ce4+ site associated with OV sites and the dissociation process does not significantly affect the electronic structure of the reduced surface. In the presence of water, a proton-mediated Mars-van Krevelen mechanism for CO oxidation via the formation of bicarbonate species is identified. Overall we find that surface hydroxyls formed via water dissociation at CeO2 surface lead to inhabitation of the CO oxidation reaction. This is consistent with the experimental observation of requisite elevated temperatures, on the order of 600K, for this reaction to occur. Part of this work was supported by the US Department of Energy, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences and performed at the Pacific Northwest National Laboratory (PNNL). PNNL is a multi-program national laboratory operated for DOE by Battelle. J. Li and Y.-G. Wang were also financially supported by NKBRSF (2011CB932400) and NSFC (91026003, 21101098) of China. Y.-G. Wang acknowledges the fellowship from China Scholarship Council and the PNNL-ASF fellowship program. Computational resources were provided at W. R. Wiley Environmental Molecular Science Laboratory (EMSL), a national scientific user facility sponsored by the Department of Energy’s Office of Biological and Environmental Research located at PNNL and the National Energy Research Scientific Computing Center (NERSC) at Lawrence Berkeley National Laboratory.

Environmental Molecular Sciences Laboratory↗

Effects of focused ion beam induced damage on the plasticity of micropillars

The hardening effects of focused ion beam (FIB) induced damage produced during the fabrication of micropillars are examined by introducing a surface layer of nanosized obstacles into a dislocation dynamics simulation. The influence of the depth and strength of the obstacles as a function of pillar diameter is assessed parametrically. We show that for a selected set of sample sizes between 0.5 and 1.0 {mu}m, the flow strength can increase by 10-20 %, for an obstacle strength of 750 MPa, and damage depth of 100 nm. On the other hand, for sizes larger and smaller than this range, the effect of damage is negligible. Results show that the obstacles formed during the FIB milling may be expected to alter the microstructure of micropillars, however, they have a negligible effect on the observed size-strength scaling laws.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of Powder Characteristics and Processing Methods on Creep Performance of Powder Metallurgy Hot Isostatic Pressed SS316

The U.S. nuclear energy expansion goals are driving the demand for manufacturing routes that can rapidly produce large, complex, near net shape components. Powder metallurgy hot isostatic pressing (PM HIP) is an advanced manufacturing technique that can be economically scaled-up, while alleviating the supply chain challenges that forging and casting face in terms of cost and lead time constraints. This makes PM-HIP a viable technology to aid and accelerate large-scale part manufacturing for nuclear applications. However, large-scale qualification and deployment of this technology require a thorough understanding of the influence of powder feedstock quality, powder handling history, hot isostatic pressing (HIP) parameters, and subsequent heat treatment on microstructural evolution and elevated temperature mechanical performance. The present work focusses on 316 austenitic stainless steel (SS316) which is most commonly used in high temperature environments for nuclear applications Results from this study show that PM HIPed SS316 meets ASME tensile requirements at room temperature and at elevated temperature. However, creep performance of PM-HIPed SS316 remains inferior to its wrought counterpart, demonstrating that tensile performance alone is not a reliable metric for long duration high temperature integrity. Further, this report delineates powder derived microstructural features that govern creep damage, with key evidences pointing to “microstructural inheritance” from gas atomized powder feedstocks. Commercial SS316 powders of varying chemical compositions and recycling histories were studies, and the results showed large differences in elemental segregation, oxide surface layers and secondary phase distributions. Multi-scale characterization revealed segregation of chromium, molybdenum, manganese and silicon at the boundaries and the precipitation of manganese-, silicon-, and molybdenum-oxides. During HIP consolidation, these surface oxides transform into decorated prior particle boundaries (PPBs) and grain boundary inclusions that persist through conventional post-HIP solution annealing treatment. The retained oxides in post-HIP microstructures were found to influence grain growth, precipitation behavior, and ultimately creep cavitation and fracture. Such post-HIP heat treatments are therefore limited by a complex trade-off between grain growth, and oxide coarsening which aggravate creep damage by acting as nucleation sites for cavities. The objective of this work is to establish an integrated processing–structure–property framework for PM-HIP 316 stainless steel by investigating the influence of powder feedstock characteristics in pre- and post-HIP processing as well as to understand the significance of post-HIP heat treatment on microstructural evolution and creep properties. The results from this report emphasize the significance of powder feedstock integrity in improving creep performance of PM-HIPed SS316, by highlight the effect of rapid solidification, elemental segregation, oxide formation and powder recycling on microstructural defect inheritance following HIP consolidation. Rather than considering HIP processing, solution annealing, and mechanical performance independently, this report treats powder production, HIP consolidation, post-HIP thermal processing, and creep deformation as interconnected stages within a continuous metallurgical process. The resulting framework will provide a scientific basis for developing feedstock engineering strategies capable of improving long-term reliability of PM-HIP stainless steels and accelerating their qualification for advanced nuclear applications.

Ajjarapu, Pavan [Oak Ridge National Laboratory (OR↗