Search NASA⌕ Search

SEARCH · Search NASA

Results for “variability analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Jet model for slot film cooling with effect of free-stream and coolant turbulence

An analysis was performed utilizing the model of a wall jet for obtaining equations that will predict slot film-cooling efficiency under conditions of variable turbulence intensity, flow, and temperature. The analysis, in addition to assessing the effects of the above variables, makes a distinction between an initial region and a fully developed region. Such a distinction is important in determining the role that the turbulence intensity of the coolant plays in effecting film-cooling effectiveness in the area of the slot exit. The results of the analysis were used in the correlation of the results of a well-designed film-cooling experiment. The result of the analysis and experiment was equations that predicted film-cooling efficiency within + or - 4% average deviation for lateral free-stream turbulence intensities up to 24% and blowing rates up to 1.9. These equations should be useful in determining the optimum quantity of cooling air requried for protecting the wall of a combustor.

Simon, Frederick F.↗

Cooled variable nozzle radial turbine for rotor craft applications

An advanced, small 2.27 kb/sec (5 lbs/sec), high temperature, variable area radial turbine was studied for a rotor craft application. Variable capacity cycles including single-shaft and free-turbine engine configurations were analyzed to define an optimum engine design configuration. Parametric optimizations were made on cooled and uncooled rotor configurations. A detailed structural and heat transfer analysis was conducted to provide a 4000-hour life HP turbine with material properties of the 1988 time frame. A pivoted vane and a moveable sidewall geometry were analyzed. Cooling and variable geometry penalties were included in the cycle analysis. A variable geometry free-turbine engine configuration with a design 1477K (2200 F) inlet temperature and a compressor pressure ratio of 16:1 was selected. An uncooled HP radial turbine rotor with a moveable sidewall nozzle showed the highest performance potential for a time weighted duty cycle.

Rogo, C.↗

Signatures of naturally induced variability in the atmosphere using multiple reanalysis datasets

A multiple linear regression analysis of nine different reanalysis datasets has been performed to test the robustness of variability associated with volcanic eruptions, the El Niño Southern Oscillation, the Quasi-Biennial Oscillation and with a specific focus on the 11-year solar cycle. The analysis covers both the stratosphere and troposphere and extends over the period 1979–2009. The characteristic signals of all four sources of variability are remarkably consistent between the datasets and confirm the responses seen in previous analyses. In general, the solar signatures reported are primarily due to the assimilation of observations, rather than the underlying forecast model used in the reanalysis system. Analysis of the 11-year solar response in the lower stratosphere confirms the existence of the equatorial temperature maximum, although there is less consistency in the upper stratosphere, probably reflecting the reduced level of assimilated data there. The solar modulation of the polar jet oscillation is also evident, but only significant during February. In the troposphere, vertically banded anomalies in zonal mean zonal winds are seen in all the reanalyses, with easterly anomalies at 30°N and 30°S suggesting a weaker and possibly broader Hadley circulation under solar maximum conditions. This structure is present in the annual signal and is particularly evident in NH wintertime. As well as the ‘top-down’ solar contribution to Northern Annular Mode variability, we show the potential contribution from the surface conditions allowing for a ‘bottom-up’ pathway. Finally, the reanalyses are compared with both observed global-mean temperatures from the Stratospheric Sounding Unit (SSU) and from the latest general circulation models from CMIP-5. The SSU samples the stratosphere over three different altitudes, and the 11-year solar cycle fingerprint is identified in these observations using detection and attribution techniques.

54 ENVIRONMENTAL SCIENCES↗

A Study of the Kepler K2 Variable EPIC 211957146 Exhibiting a Variable O’ Connell Effect

We present the multi-band photometric and spectroscopic study of an over-contact binary system, EPIC 211957146. The light curves exhibit a variable O’ Connell effect, confirmed from our observational data and the Kepler K2 data. The best photometric solution incorporating a dark spot over the primary component unveils that the system has a low-mass ratio ( q ∼ 0.17) and a high inclination ( i ∼ 85°). To confirm the solution and constrain the uncertainty, Monte-Carlo simulations are performed and the results are reported. Based on the O–C diagram analysis, we see that the variable shows a period increase at the rate of dP / dt ∼ 1.06 × 10{sup −6} days yr{sup −1}, which is higher than the theoretically predicted value. Presence of a third body having a period of ∼16.23 years is evident from the O–C diagram. No filled-in effect is observed in the H α line, while the effect is vividly present in the Na line. From the Kepler K2 data, we found that the primary and secondary minima exhibit an anti-correlated O–C variation followed by an erratic behavior. This is possibly caused by the longitudinal motion of the spot, and hence, we set a lower limit of ∼40 days for the spot modulation. We also observe a possibly associated photometric difference in the primary depth by comparing our light curves with Kepler K2 normalized light curves. This system has a low-mass ratio and a high fill-out factor, and, theoretically, such a physical configuration would lead to a merger.

79 ASTRONOMY AND ASTROPHYSICS↗

A new structural analysis/synthesis capability - ACCESS

The creation of an efficient automated capability for minimum weight design of structures is reported. The ACCESS 1 computer program combines finite element analysis techniques and mathematical programming algorithms using an innovative collection of approximation concepts. Design variable linking, constraint deletion techniques and approximate analysis methods are used to generate a sequence of small explicit mathematical programming problems which retain the essential features of the design problem. Organization of the finite element analysis is carefully matched to the design optimization task. The efficiency of the ACCESS 1 program is demonstrated by giving results for several example problems.

Schmit, L. A.↗

Advanced Benchmarking for Complex Building Types: Laboratories as an Exemplar

Complex buildings such as laboratories, data centers and cleanrooms present particular challenges for energy benchmarking because it is difficult to normalize special requirements such as health and safety in laboratories and reliability (i.e., system redundancy to maintain uptime) in data centers which significantly impact energy use. For example, air change requirements vary widely based on the type of work being performed in each laboratory space. We present methods and tools for energy benchmarking in laboratories, as an exemplar of a complex building type. First, we address whole building energy metrics and normalization parameters. We present empirical methods based on simple data filtering as well as multivariate regression analysis on the Labs21 database. The regression analysis showed lab type, lab-area ratio and occupancy hours to be significant variables. Yet the dataset did not allow analysis of factors such as plug loads and air change rates, both of which are critical to lab energy use. The simulation-based method uses an EnergyPlus model to generate a benchmark energy intensity normalized for a wider range of parameters. We suggest that both these methods have complementary strengths and limitations. Second, we present"action-oriented" benchmarking, which extends whole-building benchmarking by utilizing system-level features and metrics such as airflow W/cfm to quickly identify a list of potential efficiency actions which can then be used as the basis for a more detailed audit. While action-oriented benchmarking is not an"audit in a box" and is not intended to provide the same degree of accuracy afforded by an energy audit, we demonstrate how it can be used to focus and prioritize audit activity and track performance at the system level. We conclude with key principles that are more broadly applicable to other complex building types.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Satellite Data Assimilation

Satellite altimetry provides the only routine observation of a dynamic variable of the global ocean. For instance, measurements from the TOPEX/POSEIDON altimeter have provided dramatic basin-wide images of the space-time evolution of sea level associated with the 1997-98 El Nino event. The nature of large-scale ocean circulation is being studied that underlies such sea level changes measured by satellite altimetry. To first approximation, properties of large-scale (order 1000 km and larger) sea level variability is latitudinally dependent. An analysis using a general circulation model shows that sea level changes are largely due to wind-driven baroclinic (depth dependent) circulation in the tropics (within 20 degrees of the equator), but are primarily due to the expansion and contraction of near surface water in temperate latitudes (between 20 deg. and 40 deg.) forced by seasonal heating and cooling. In contrast, wind-driven barotropic (depth independent) circulation dominates sea level variability in high latitudes (40 deg. and higher) characterized by periods that are as short as a few days. The presence of such inhomogeneity and the significance of high-frequency, large-scale sea level changes had not been fully recognized prior to this study, and are summarized in Fukumori et al. Numerical models provide theoretical relationships among properties that can be inverted using observations so as to estimate the entire state of the ocean, including properties that are otherwise difficult to measure remotely. The process is data assimilation. An approximate Kalman filter and smoother have been devised to assimilate three years of TOPEX/POSEIDON sea level data into a global ocean general circulation model. The figure below demonstrates the skill of the assimilation, and shows the altimeter assimilated estimate being in closer agreement than the simulation is with independent in situ measurements of subsur ace temperature and velocity, consistent with formal uncertainty estimates. Results from this study have been summarized and submitted for publication. The study demonstrates the feasibility of global ocean data assimilation and illustrates applications in monitoring and understanding of processes controlling the evolution of the ocean. Additional information is contained in the original.

Fukumori, Ichiro↗

Image Analysis for Rapid Assessment and Quality-Based Sorting of Corn Stover

Imaging in the visible spectrum is a low-cost tool that can be readily deployed for in-field or over-belt monitoring of biomass quality for bio-refining operations. Rapid image analysis coupled with innovative preprocessing may reduce the impacts of feedstock variability through identification of contaminants or other material attributes to guide selective sorting and quality management. Image analysis was employed to evaluate the quality of corn stover in red-green-blue (RGB) chromatic space. This study used controlled, bench-scale imaging as a proof-of-concept for rapid quality assessment of corn stover based on variations in material attributes, including chemical and physical attributes, that relate to biological degradation and soil contamination. Additionally, logistic regression-based classification algorithms were used to develop a method for biomass screening as a function of biological degradation or soil contamination. This study demonstrated the use of image analysis to extract features from RGB color space to investigate variations in critical material attributes from chemical composition of corn stover. Fourier transform infrared (FT-IR) suggested a correlation between red band intensity and biological degradation, while detailed surface texture analysis was found to distinguish among variations in ash. These insights offer promise for development of a rapid screening tool that could be deployed by farmers for in-field assessment of biomass quality or biorefinery operators for in-line sorting and process optimization.

09 BIOMASS FUELS↗

Disentangling the Impacts of Microtopography and Shrub Distribution on Snow Depth in a Subarctic Watershed: Toward a Predictive Understanding of Snow Spatial Variability: Supporting Data and Code

This repository contains R code and associated datasets for reproducing the analysis described in the manuscript titled “Disentangling the Impacts of Microtopography and Shrub Distribution on Snow Depth in a Subarctic Watershed: Toward a Predictive Understanding of Snow Spatial Variability” (DOI: 10.1029/2024JG008604). The provided scripts facilitate a comprehensive analysis of snow depth variability influenced by microtopography and vegetation distribution in a subarctic watershed. Included datasets are high-resolution spatial maps of snow depth, terrain elevation, vegetation height, and distance from shrubs taller than 1 meter, all formatted as text files (.txt). These data are fully describe in doi:10.15485/2316038. Users can adapt the provided R scripts to accommodate different data formats or larger spatial domains, noting that some output files may require modification due to their size.The code includes implementations for boosted regression tree analysis adapted from methods outlined in Elith et al. (2008). Users interested in understanding or modeling landscape-scale snow distribution patterns, particularly in Arctic or subarctic ecosystems, will find this package useful. The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research.The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska.Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗

TIME-SPECTRAL ANALYSIS ALGORITHMS FOR LEAD SLOWING-DOWN SPECTROSCOPY OF SPENT FUEL

Nondestructively determining the plutonium content in spent fuel assemblies continues to be a considerable challenge in the safeguarding of nuclear fuel cycles. Motivating needs for such measurements include quantifying material input at a reprocessing facility, determining the shipper-receiver difference, and recovering continuity of knowledge. A nondestructive assay (NDA) technology that could provide timely (tens of minutes), independent (no operator-declared information), and direct measurement of Pu mass that improves upon the uncertainty of today’s confirmatory methods would be a major step forward for spent fuel materials accountability. Lead slowing-down spectroscopy (LSDS) is one potential fuel assay technique; previous work has indicated promise of the method for specific fuel types and assay assumptions. In this work, the focus is the assay of pressurized water reactor assemblies over a wide burnup range, under the following assumptions: a) No a priori information (e.g. initial loading or burnup) is available about the assembly, and b) No pre-existing calibration generated from the measurement of many similar assemblies is available. The technical emphasis of this paper is the development of time-spectral analysis algorithms for LSDS that can extract as much isotopic information as possible from the complex, but content-rich assay signal. The key advancement described here is a mathematical relationship to account for self-shielding created by the fissile isotopes and the effects of neutron-absorbing fission and activation products. This formulation utilizes the known energy-dependent cross-sections from key isotopes, but leaves their mass as free variables. Multi-parameter regression analysis is used to directly calculate not only the mass of fissile isotopes in the fuel assembly (e.g. Pu-239, U-235 and Pu-241), but also the mass of key absorbing isotopes such as Pu-240 and U-238. Preliminary results, using a first-order self-shielding relationship, indicate that LSDS has the potential to directly measure total Pu with less than 5% average relative error, over a burnup range from 0 to 60 GWd/MTU. Assay of U-235 and U-238 is also possible, though with higher uncertainties. Deficiencies in the self-shielding model and methods to improve that formulation are described, along with application of the method to a wider range of fuel types and burnups.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

KKT Preconditioners for PDE-Constrained Optimization with the Helmholtz Equation

This paper considers preconditioners for the linear systems that arise from optimal control and inverse problems involving the Helmholtz equation. Specifically, we explore an all-at-once approach. The main contribution centers on the analysis of two block preconditioners. Variations of these preconditioners have been proposed and analyzed in prior works for optimal control problems where the underlying partial differential equation is a Laplace-like operator. In this paper, we extend some of the prior convergence results to Helmholtz-based optimization applications. Our analysis examines situations where control variables and observations are restricted to subregions of the computational domain. We prove that solver convergence rates do not deteriorate as the mesh is refined or as the wavenumber increases. More specifically, for one of the preconditioners we prove accelerated convergence as the wavenumber increases. Additionally, in situations where the control and observation subregions are disjoint, we observe that solver convergence rates have a weak dependence on the regularization parameter. We give a partial analysis of this behavior. We illustrate the performance of the preconditioners on control problems motivated by acoustic testing.

97 MATHEMATICS AND COMPUTING↗

Stream Fish Responses to Grazing Exclosures

Abstract Eight paired reaches of northeastern Oregon streams were selected such that one reach was an established livestock exclosure and a neighboring, geomorphologically similar reach was open to grazing. Exclosures varied in length from 123 to 436 m. Teams of snorkelers recorded fish species and size-groups in the exclosure and grazed reaches simultaneously so that diurnal changes in fish behavior did not confound results. Observed densities of age-0 redband trout Oncorhynchus mykiss in pools, corrected for snorkeler range of vision, were significantly different (P < 10−9), increasing by an average of 2.5-fold in exclosed reaches. Conversely, warmwater fishes (dominated by speckled dace Rhinichthys osculus) were negatively related to exclosures (P < 0.001). Densities of age-0 warmwater fish and age-0 O. mykiss were uncorrelated (P = 0.18). No first-order interactions existed among exclosure–control treatment, stream, and pool temperature variables in either age-0 analysis. Combined juvenile and adult O. mykiss results indicated significant interactions between several streams and temperature and only a marginal effect (P = 0.05) of exclosure. No significant exclosure effect existed on combined juvenile and adult warmwater fish (P > 0.90). The greater density of age-0 O. mykiss in exclosures was attributed to the potential food supply and cover due to increases in undercut banks, instream bank vegetation, width : depth ratio, and several riparian vegetation variables. Bioenergetic and scale arguments are presented that are consistent with the failure to detect a parallel effect with juvenile and adult O. mykiss. A marginally significant (P = 0.04) mean drop in pool water temperature of 0.7°C in exclosures was observed, but continual temperature monitoring indicated no significant difference (P > 0.50) between reaches in 7-d means of daily maxima or minima. These results are promising with respect to improvement of salmonid habitat through prevention of grazing, but the exclosures are too small and infrequent to be effective at the population or basin-wide level.

Bayley, Peter B.↗

Analysis of basic airflow configurations for separate sensible and latent cooling systems with indoor air recirculation

Separate sensible and latent cooling (SSLC) is a technology with efficiency and comfort advantages over conventional cooling systems used for space conditioning of buildings. Using multiple cooling processes at different temperatures allows SSLC to save energy by raising the evaporation temperature of the sensible cooling process. In this paper, all possible airflow configurations of SSLC systems are enumerated under the following constraints: exactly two heat exchangers are used, and air is recirculated to the conditioned space (no exhaust or outdoor air treatment). Seven designs are identified, with varying free operating variables, and each is modeled. Analysis reveals that several configurations are equivalent, and there is only one unique basic airflow SSLC configuration: the one with the sensible and latent heat exchangers placed in series. The efficiency of the SSLC system is compared against that of the conventional system. Under standard conditions, an SSLC system can improve the coefficient of performance by 14.8%. In addition to the numerical simulation, the optimal operating condition of the basic air configuration of the SSLC system is derived analytically. The basic SSLC system is shown to offer the highest performance improvement when the outdoor temperature is relatively cool and the space sensible heat ratio is high.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Energy Intensity Baselining and Tracking Guidance

Each company joining the U.S. Department of Energy’s (DOE’s) Better Buildings, Better Plants Program (Better Plants) commits to establishing an energy consumption and energy intensity (EI) baseline and to tracking its energy performance over a 10-year period against that baseline. The baseline must reflect a company’s energy consumption over a 12-month period, covering all its U.S.-based operations. Energy consumption is calculated by fuel type in terms of primary energy (also known as source energy). EI is broadly defined as the amount of energy consumed per unit of output produced. For this guidance document and for the program, the term energy performance represents an evaluation of a facility’s capacity to use energy efficiently. Metrics used to assess a facility’s energy performance can include EI, energy consumption, improvements in EI, etc. Establishing an energy baseline and tracking system is a critical first step in effectively managing energy use. Developing a baseline can help a company understand energy use within the corporation and give it a point of comparison to evaluate future efforts to improve energy performance. It can also support efforts to validate a company’s energy management activities, improve comparative analyses when using benchmarks, and help in predicting future energy needs. In addition, a company that normalizes its performance data can determine highly defensible measures of energy savings generated through implemented energy efficiency projects. Establishing a baseline and tracking energy performance is also a requirement for ISO 50001 certification. Although basic energy data can be collected through utility bills, most manufacturers will have to perform additional analyses to develop accurate and robust energy baselines and tracking systems. Energy is consumed in many ways within the manufacturing sector and can come from multiple sources. Energy is sometimes generated and sold to other parties or captured and reused on-site. External events can exert a significant impact on a facility or company’s energy use independent of any purposeful efforts to improve energy efficiency. Operational changes, such as production shifts—which may be inevitable for some companies over the 10-year period covered by the program—can also make a big difference in energy use. Since Better Plants asks companies to account for all their U.S.-based operations, mergers, acquisitions, and divestitures can also have significant implications for a company’s energy metrics. This document aims to demystify the sometimes complex baselining process. It devotes special attention to the task of normalizing and adjusting energy consumption to account for external factors, such as weather and production changes. A key recommendation is that companies use regression analysis to normalize their energy consumption data whenever possible. Regression analysis is a statistical technique that estimates the dependence of a variable (i.e., energy use in the context of Better Plants) on one or more independent variables such as ambient temperature, while controlling for the influence of other variables at the same time. A properly developed regression analysis can provide a reliable estimate of energy savings resulting from energy improvement strategies and projects by accounting for the effects of variables such as annual production levels and weather. DOE has developed a companion Energy Performance Indicator software tool (EnPI) to simplify the baselining process. This tool can run regression models, calculate changes in EI at the facility level, and automatically compile facility-level data into a corporate-wide metric. Note that although the relevant equations used to calculate EI are provided in this document, the EnPI tool will automatically perform most calculations for the user. Additionally, Better Plants Partners (Partners) can call on their Technical Account Manager (TAM) to help them establish a baseline and assist with the necessary calculations to track progress.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Variability Studies of Narrow Line Seyfert 1 Galaxy

I supported the data reduction and analysis. We found that the source was not as variable as other soft AGN such as the narrow line Sy 1 galaxies (NLSls). The NLSls vary on time scales of days, while the ROSAT data for this target was fairly constant over a week at a time. Thus, it was very important to have a light curve that spanned 60 days as was the case for these ROSAT observations because the power spectral distribution can be established to very low frequencies that are rarely measured.

Marshall, Hermann↗

Determining the Optimal Number of Clusters with the Clustergram

Cluster analysis aids research in many different fields, from business to biology to aerospace. It consists of using statistical techniques to group objects in large sets of data into meaningful classes. However, this process of ordering data points presents much uncertainty because it involves several steps, many of which are subject to researcher judgment as well as inconsistencies depending on the specific data type and research goals. These steps include the method used to cluster the data, the variables on which the cluster analysis will be operating, the number of resulting clusters, and parts of the interpretation process. In most cases, the number of clusters must be guessed or estimated before employing the clustering method. Many remedies have been proposed, but none is unassailable and certainly not for all data types. Thus, the aim of current research for better techniques of determining the number of clusters is generally confined to demonstrating that the new technique excels other methods in performance for several disparate data types. Our research makes use of a new cluster-number-determination technique based on the clustergram: a graph that shows how the number of objects in the cluster and the cluster mean (the ordinate) change with the number of clusters (the abscissa). We use the features of the clustergram to make the best determination of the cluster-number.

Fluegemann, Joseph K.↗

The Impacts of a Weakened Atlantic Meridional Overturning Circulation on ENSO in a Warmer Climate

This study quantifies the impacts of the Atlantic Meridional Overturning Circulation (AMOC) on the El Niño–Southern Oscillation (ENSO) under anthropogenic warming by comparing climate change model simulations with declining and fixed strengths of the overturning. After the 1980s, a weakened AMOC is shown to reduce the strength of the annual cycle of sea surface temperature (SST) in the eastern equatorial Pacific and induce anomalous cross-equatorial northerly winds there, which strengthens ENSO variability by about 11%. An analysis of the Bjerknes stability index reveals that this intensification of ENSO results mainly from enhanced Ekman upwelling feedback due to amplified atmospheric wind response to SST anomalies and oceanic upwelling response to equatorial wind stress anomalies. The weakened AMOC also promotes the occurrence of Central Pacific El Niño events and reduces ENSO skewness. These AMOC impacts on ENSO magnitude and complexity throughout the twenty-first century are however smaller than ENSO variations expected from internal climate variability.

54 ENVIRONMENTAL SCIENCES↗

Effect of Embolization Material in the Calculation of Dose Deposition in Arteriovenous Malformations

In this work it is studied the impact of the incorporation of high Z materials (embolization material) in the dose calculation for stereotactic radiosurgery treatment for arteriovenous malformations. A statistical analysis is done to establish the variables that may impact in the dose calculation. To perform the comparison pencil beam (PB) and Monte Carlo (MC) calculation algorithms were used. The comparison between both dose calculations shows that PB overestimates the dose deposited. The statistical analysis, for the quantity of patients of the study (20), shows that the variable that may impact in the dose calculation is the volume of the high Z material in the arteriovenous malformation. Further studies have to be done to establish the clinical impact with the radiosurgery result.

62 RADIOLOGY AND NUCLEAR MEDICINE↗