Search NASA⌕ Search

SEARCH · Search NASA

Results for “wakefields”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Terahertz parametric amplification as a reporter of exciton condensate dynamics

Condensates are a hallmark of emergence in quantum materials with superconductors and charge density wave as prominent examples. An excitonic insulator (EI) is an intriguing addition to this library, exhibiting spontaneous condensation of electron-hole pairs. However, condensate observables can be obscured through parasitic coupling to the lattice. Time-resolved terahertz (THz) spectroscopy can disentangle such obscurants through measurement of the quantum dynamics. We target Ta 2 NiSe 5 , a putative room-temperature EI where electron-lattice coupling dominates the structural transition (T c = 326 K), hindering identification of excitonic correlations. A pronounced increase in the THz reflectivity manifests following photoexcitation and exhibits a BEC-like temperature dependence. This occurs well below the T c , suggesting a novel approach to monitor exciton condensate dynamics. Nonetheless, dynamic condensate-phonon coupling remains as evidenced by peaks in the enhanced reflectivity spectrum at select infrared-active phonon frequencies. This indicates that parametric reflectivity enhancement arises from phonon squeezing, validated using Fresnel-Floquet theory and density functional calculations. In conclusion, our results highlight that coherent dynamics can drive parametric stimulated emission with concomitant possibilities, including entangled THz photon generation.

36 MATERIALS SCIENCE↗

Three-dimensional flat bands in pyrochlore metal CaNi 2

Electronic flat-band materials host quantum states characterized by a quenched kinetic energy. These flat bands are often conducive to enhanced electron correlation effects and emergent quantum phases of matter. Long studied in theoretical models, these systems have received renewed interest after their experimental realization in van der Waals heterostructures and quasi-two-dimensional (2D) crystalline materials. An outstanding experimental question is if such flat bands can be realized in three-dimensional (3D) networks, potentially enabling new materials platforms and phenomena. Here we investigate the C15 Laves phase metal CaNi 2 , which contains a nickel pyrochlore lattice predicted at a model network level to host a doubly-degenerate, topological flat band arising from 3D destructive interference of electronic hopping. Using angle-resolved photoemission spectroscopy, we observe a band with vanishing dispersion across the full 3D Brillouin zone that we identify with the pyrochlore flat band as well as two additional flat bands that we show arise from multi-orbital interference of Ni d -electrons. Furthermore, we demonstrate chemical tuning of the flat-band manifold to the Fermi level that coincides with enhanced electronic correlations and the appearance of superconductivity. Extending the notion of intrinsic band flatness from 2D to 3D, this provides a potential pathway to correlated behaviour predicted for higher-dimensional flat-band systems ranging from tunable topological to fractionalized phases.

36 MATERIALS SCIENCE↗

Broadband single-shot electron spectrometer for GeV-class laser-plasma-based accelerators

Laser-plasma-based accelerators can provide electrons over a broad energy range and/or with large momentum spread. The electron beam energy distribution can be controlled via accurate control of laser and plasma properties, and beams with energies ranging from {approx_equal}0.5 to 1000 MeV have been observed. Measuring these energy distributions in a single shot requires the use of a diagnostic with large momentum acceptance and, ideally, sufficient resolution to accurately measure narrow energy spread beams. Such a broadband single-shot electron magnetic spectrometer for GeV-class laser-plasma-based accelerators has been developed at Lawrence Berkeley National Laboratory. Detailed descriptions of the design concept and hardware are presented, as well as a performance evaluation of the spectrometer. The spectrometer covered electron beam energies raging from 0.01 to 1.1 GeV in a single shot, and enabled the simultaneous measurement of the laser properties at the exit of the accelerator through the use of a sufficiently large pole gap. Based on measured field maps and third-order transport analysis, a few percent-level resolution and determination of the absolute energy were achieved over the entire energy range. Laser-plasma-based accelerator experiments demonstrated the capability of the spectrometer as a diagnostic and its suitability for measuring broadband electron sources.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Controlled electron injection into the wake wave using plasma density inhomogeneity

The electron injection, for the laser wake field accelerator, controlled through the plasma density inhomogeneity is studied on a basis of analytical estimates and two- and three-dimensional particle-in-cell simulations. The injection scheme requires a concordance of the density scale length and laser intensity. It is shown that at a sloping inhomogeneity of plasma the wave breaking produces stronger singularity of the electron density than at a density discontinuity, but develops slower. With the help of simulations for a moderate laser intensity, we demonstrate the optimal plasma density gradient, where the electron injection into the wake wave forms the electron beam with low divergence, small energy spread and high energy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Stable High-Quality Electron Bunch Generation via Counter-Crossing Injection

We demonstrate a highly reproducible acceleration of a high-quality electron bunch injected into the laser wake field accelerator with the help of a counter-crossing laser pulse. In our experiments, the wake field is generated by a sub-relativistic laser pulse; the second laser pulse collides with the first pulse at 135 deg. realizing optical injection of electron bunch into the wake field. Since the second pulse is counter-crossing, it can not damage the laser system. The observed electron bunch has the energy of 14 MeV with a 11% (1.5 MeV) spread, the total charge of 22 pC, a normalized emittance not greater than 0.8{pi} mm mrad, and a reproducibility at least 50%.

43 PARTICLE ACCELERATORS↗

Self-Guiding of Ultrashort Relativistically Intense Laser Pulses to the Limit of Nonlinear Pump Depletion

A study of self-guiding of ultra short, relativistically intense laser pulses is presented. Here, the laser pulse length is on the order of the nonlinear plasma wavelength and the normalized vector potential is greater than one. Self-guiding of ultrashort laser pulses over tens of Rayliegh lengths is possible when driving a highly nonlinear wake. In this case, self-guiding is limited by nonlinear pump depletion. Erosion of the pulse due to diffraction at the head of the laser pulse is minimized for spot sizes close to the blow-out radius. This is due to the slowing of the group velocity of the photons at the head of the laser pulse. Using an approximately 10 TW Ti:Sapphire laser with a pulse length of approximately 50 fs, experimental results are presented showing self-guiding over lengths exceeding 30 Rayliegh lengths in various length Helium gas jets. Fully explicit 3D PIC simulations supporting the experimental results are also presented.

43 PARTICLE ACCELERATORS↗

Indication of Local Laser Pump Depletion via Transmitted Self-Guided Laser Light

In recent experiments it has been shown that an ultra-intense, ultra-short laser pulse can be self-guided over tens of Rayleigh lengths in an underdense plasma where {tau}(FWHM of the laser pulse) is on the order of the plasma wavelength ({lambda}{sub p}). Using an imaging spectrograph, the frequency of the transmitted laser pulse was spatially and spectrally resolved at the exit of 3, 5, and 8 mm long plasmas. The mechanism of laser pump depletion was studied by observing the amount that the transmitted laser pulse's spectrum was red shifted in wavelength through the interaction with the self-guiding plasma wave.

43 PARTICLE ACCELERATORS↗

Appearance of Density Cavitations in the Laser Wake in Simulations of High Intensity Laser-Plasma Interactions

Nonlinear interactions of high intensity, ultrashort laser pulses with underdense plasmas produce many interesting features that may appear in computer simulations. One of these features commonly observed in Particle-In-Cell (PIC) simulations is the spontaneous appearance of long-lived density cavitations in the plasma wake region behind the laser pulse. To study these cavitations, several small 2D PIC simulations are run in which plasma density, density ramps, total simulation time, laser pulsewidth, laser intensity, and laser polarization parameters have been varied. Based on the simulation results, some possible aspects of an experiment designed to directly detect these structures are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Contrast Enhancement of the LOASIS CPA Laser and Effects on Electron Beam Performance of LWFA

A nonlinear optical pulse cleaning technique based on cross-polarized wave (XPW) generation filtering [1] has been implemented to improve laser pulse contrast, and consequently to control pre-ionization in laser-plasma accelerator experiments. Three orders of magnitude improvement in pre-pulse contrast has been achieved, resulting in 4-fold increase in electron charge and improved stability of both the electron beam energy and THz radiation generated as a secondary process in the gas-jet-based LWFA experiments.

43 PARTICLE ACCELERATORS↗

Two-Channel Rectangular Dielectric Wake Field Accelerator Structure Experiment

A design is presented for a two-channel 30-GHz rectangular dielectric wake field accelerator structure being built for experimental tests at Argonne National Laboratory (ANL). This structure allows for a transformer ratio T much greater than two, and permits continuous coupling of energy from drive bunches to accelerated bunches. It consists of three planar slabs of cordierite ceramic ({epsilon} = 4.7) supported within a rectangular copper block, forming a drive channel 12 mmx6 mm, and an accelerator channel 2 mmx6 mm. When driven by a 50 nC, 14 MeV single bunch available at ANL, theory predicts an acceleration field of 6 MeV/m, and T = 12.6. Inherent transverse wake forces introduce deflections and some distortion of bunch profiles during transit through the structure that are estimated to be tolerable. Additionally, a cylindrical two-channel DWFA is introduced which shares many advantages of the rectangular structure including high T, and the added virtue of axisymmetry that eliminates lowest-order transverse deflecting forces.

43 PARTICLE ACCELERATORS↗

Two-beam, Multi-mode Detuned Accelerating Structure

A two-beam accelerator structure is described having several novel features including all metal construction, no transfer structures required between the drive and accelerator channels, symmetric fields at the axes of each channel, RF micropulse widths on cavity irises that are less than half those for a conventional cavity at the same fundamental frequency by virtue of using several harmonically-related cavity modes, and a transformer ratio much greater than unity by the use of detuned cavities. Detuning is also shown to allow either parallel or anti-parallel directions for the drive and accelerated beams. A preliminary calculation for the dilution of emittance due to short-range wakes for drive beam parameters similar to those for CLIC shows this effect to be acceptably small.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Control and Manipulation of Electron Beams

The concepts of the advanced accelerators and light source rely on the production of bright electron beams. The rms areas of the beam phase space often need to be tailored to the specific applications. Furthermore, a new class of the forefront research calls for detailed specific distribution such as the particle density in the time coordinate. Several groups are tackling these various challenges and in this report we attempt to give a review of the state-of-the-art of the control and manipulation of the electron beams.

36 MATERIALS SCIENCE↗

3D Simulations for a Micron-Scale, Dielectric-Based Acceleration Experiment

An experimental program to demonstrate a dielectric, slab-symmetric accelerator structure has been underway for the past two years. These resonant devices are driven by a side-coupled 800-nm laser and can be configured to maintain the field profile necessary for synchronous acceleration and focusing of relativistic or nonrelativistic particles. We present 3D simulations of various versions of the structure geometry, including a metal-walled structure relevant to ongoing cold tests on resonant properties, and an all-dielectric structure to be constructed for a proof-of-principle acceleration experiment.

36 MATERIALS SCIENCE↗

Experimental Testing of a Micron-Scale Laser-Powered Accelerator

An experimental program to develop, perfect, and demonstrate a micron-scale dielectric-based slab-symmetric accelerator is underway at UCLA. The effort includes parallel development of a particle source to be integrated with the accelerator, forming a monolithic radiation source. We present results from first-round cold tests of the structure resonance on a simplified metal-walled device, containing >100 structure periods in an area of 100x20 {mu}m. The resonance frequency and strength can be observed via reflection and transmission measurements on the drive laser. Initial measurements may be consistent with simulation. We also report on the status of the electron source development and on work toward an acceleration test in an all-dielectric structure.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Woodpile Structure Fabrication for Photonic Crystal Laser Acceleration

We describe initial steps at fabricating a dielectric photonic bandgap accelerator structure designed to operate at near IR frequencies. Such a structure operating at these frequencies requires extremely small, sub-micron sized features, forcing one to use lithographic means for fabrication. A process based upon lithographic equipment at the Stanford Nanofabrication Facility has been developed and a four layer test structure has been fabricated. Unexpected problems with the final etch step, and corresponding modifications to the process flow addressing these problems, are described. Spectroscopic measurements of the structure have been taken and are compared to simulations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗