Search NASA⌕ Search

SEARCH · Search NASA

Results for “AGE DEPENDENCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Temperature-Dependent Effects on the Mechanical Behavior and Deformation Substructure of Haynes 188 Under Low-Cycle Fatigue

The mechanical behavior of a cobalt-nickel-chromium-tungsten superalloy, Haynes 188, is being critically examined at the NASA Lewis Research Center. This dynamic, strain-aging (DSA) alloy is used for combustor liners in many military and commercial aircraft turbine engines and for the liquid oxygen posts in the main injectors of the space shuttle main engine. Its attractive features include a good combination of high monotonic yield and tensile strength, and excellent fabricability, weldability, and resistance to high-temperature oxidation for prolonged exposures.

Source record↗

Investigations of dual-purpose canister direct disposal feasibility - 15106

Direct disposal of commercial spent nuclear fuel (SNF) in dual-purpose canisters (DPCs) could avoid the cost and complexity of re-packaging spent fuel into smaller purpose-built containers, avoid disposing of the DPC hulls as low-level waste, and potentially decrease worker dose. Technical objectives for disposal are: 1) safety of workers and the public, 2) engineering feasibility; 3) thermal management; and 4) criticality control after permanent closure of a repository. The postclosure safety case for DPC direct disposal would resemble that for any repository-waste isolation would be enhanced by choosing host geology in which radionuclide transport is diffusion dominated, and for which transport properties and pathways are insensitive to the expected temperature history. Containment functions would be assigned to the disposal overpack, and published data show that suitable materials exist for most possible disposal environments. Earlier studies showed that DPC-based waste packages would be only slightly larger and heavier than those proposed for a repository in volcanic tuff. Engineered solutions are available for transporting and emplacing them underground, although some could be the largest of their kind. The cost of DPC direct disposal in various geologic settings has been compared to options involving a change to loading standardized multi-purpose canisters, or continuing to load DPCs and re-packaging all of them for disposal. In general DPC direct disposal would cost tens of billions of dollars less, in packaging and disposal costs. Calculations for emplacement in hard rock and sedimentary rock show that host rock peak temperature targets of 100 to 200 deg.C could be met by managing fuel age and burnup, with repository closure at up to 150 years from reactor discharge. For disposal in salt, DPC-based waste packages could be emplaced at only 50 to 100 years from discharge, depending on burnup. Sedimentary media such as shales pose special challenges especially if they have low thermal conductivity. If backfill is used around DPC-based packages its peak temperature could be 150 to 200 deg.C. Without flooding of waste packages with ground water, criticality can never occur. However, some small number of disposal overpacks could fail within the postclosure performance period due to corrosion or disruptive events. Once flooded, the aluminum-based neutron absorber materials used in most DPCs would readily degrade. Analysis has shown that even without neutron absorbers, virtually all DPCs could be subcritical if flooded with chloride brines such as would occur in a salt repository. The licensing basis for existing DPCs involves criticality analysis that may be conservative compared to fuel that is actually loaded, and the difference provides uncredited reactivity margin. Uncredited margin can offset increases in reactivity associated with flooding and basket degradation. For flooding with fresh water, with loss of neutron absorbers, many DPCs have been shown to be subcritical using uncredited margin. Significantly fewer are subcritical if the fuel basket also degrades. Thus, the materials of DPC basket construction (e.g., aluminum or carbon steel) could be deleterious if they fully corrode, along with the neutron absorbers, during the performance period. Logistical simulations are used to better understand the relationship between the needed DPC decay storage time for disposal, and the timing of future events such as the repository opening date, or a transition to loading multi-purpose (disposable) canisters at nuclear power plants. Results show that the maximum benefit from implementing a new canister design, with respect to shortening the cooling time for all SNF including that in DPCs, is associated with the earliest repository start date. As time passes more of the total SNF inventory will be in DPCs such that the value of a transition to multi-purpose canisters will decline, and the remaining options are DPC direct disposal and re-packaging in purpose-designed disposal canisters. Fuel age at emplacement is of interest to evaluate potential impacts from future changes in the fuel management system that could place fuel age limits on dry storage or transportation. The minimum fuel age at emplacement (best-case) is obtained by re-packaging all DPCs into smaller canisters for disposal, thus drastically decreasing the needed decay storage time for any geologic disposal setting. If the industry transitions to smaller, multi-purpose canisters, and without re-packaging, the fuel age at emplacement would be comparable to the best case if: 1) the emplacement power limit is high enough, or 2) both the transition and the repository start date occur early (e.g., 2036 was analyzed). Technical feasibility evaluation continues to show that direct disposal could be safe and cost effective, for some DPCs and in some geologic settings. Direct disposal of a substantial fraction of existing DPCs, limited mainly by thermal management, uncredited criticality margin, materials of DPC basket construction, and the salinity of ground water in the disposal environment, could be part of the overall waste management system. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Nonlinear Resonant Ultrasound Spectroscopy for Predicting Sensitivity to Initiation in Granular High Explosives

Abstract Nonlinear Resonant Ultrasound Spectroscopy (NRUS) is a technique that can measure bulk nonlinear coefficients of the nonlinear elastic modulus for a material. NRUS has been used to identify damage in a variety of granular materials including rocks and concrete. Some energetic materials, such as Pentaerythritol Tetranitrate (PETN), are commonly fielded as pressed granular compacts. It is well known that the sensitivity to initiation of these materials is heavily dependent on their microstructure, and that microstructure changes naturally (becomes damaged) over time. In this study, we examine the use of NRUS to identify changes in microstructure between pristine and thermally aged PETN pellets. In particular, we examine the relationship between the bulk hysteretic nonlinearity, α , of the pellets and time spent at temperature, powder specific surface area (SSA), and sensitivity to initiation. We find that, in general, α does not increase uniformly for all pellets within a single thermal aging condition. However, when the pellets are test fired to determine sensitivity to initiation, there is a strong correlation between α and firing voltage threshold. NRUS‐measured α has the added benefit that the measurements can be made in situ and on benchtop scales.

Schulze, Peter↗

Numb positively regulates autophagic flux via regulating lysosomal function

Autophagy is a lysosome-dependent catabolic process involving in the degradation and recycling of unnecessary or damaged proteins and organelles. Emerging evidence indicates that autophagy dysfunction is closely related to various human diseases including cancer, aging, myopathies and neurodegenerative disorders. Here, using genetic knockdown, we uncover the role of Numb, an endocytic adaptor protein, in regulating the late steps of autophagy. We found that Numb depletion led to the accumulation of autophagic vacuole, as verified by RFP-LC3 staining combined with transmission electron microscopy. Further investigation indicated that Numb depletion impaired autophagic degradation through inhibiting the activities of lysosomal enzymes (Cathepsin D, β-glucuronidase and β-glucosidase). Moreover, Numb depletion induced elevation of lysosomal pH values and decrease of glycosylated lysosome-associated membrane proteins. We further observed that Rab7 activity was inhibited in Numb-depleted cells. Together, our findings revealed a novel function of Numb and its likely mechanism in regulation of autophagy events. - Highlights: • Numb depletion induces the accumulation of autophagic vacuole in MCF-7 cells. • Numb depletion impairs autophagic degradation and lysosomal enzymes activities. • Numb depletion elevates lysosomal pH but decreases glycosylated LAMPs. • Numb may regulate lysosome maturation by facilitating Rab7 activation.

60 APPLIED LIFE SCIENCES↗

Fluvastatin activates sirtuin 6 to regulate sterol regulatory element-binding proteins and AMP-activated protein kinase in HepG2 cells

Highlights: • Effects of fluvastatin in human hepatocytes via SIRT6 activation were investigated. • Fluvastatin plays the role of an SIRT6 activator. • Fluvastatin can be used as a new drug for patients with liver steatosis. • Fluvastatin inhibited lipid synthesis by regulating SREBP1 via LKB1/AMPK pathway. Sirtuins, a family of NAD{sup +}-dependent deacetylase enzymes, have been identified as mammalian homologs of yeast silent information regulator 2 (SIR2). Sirtuin 6 (SIRT6) plays important roles in cell homeostasis, DNA damage repair, cancer suppression, and aging. SIRT6 overexpression improves metabolic diseases, such as hypercholesterolemia, cholesterol-related disease, and type 2 diabetes via AMP-activated protein kinase (AMPK) activation. SIRT6 is abundant in the liver and is a crucial target for patients with liver steatosis. Compounds for drug repositioning were screened to identify potential SIRT6 activators, and fluvastatin, a synthetic inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A reductase that reduces cholesterol synthesis, was identified to activate SIRT6. When HepG2 cells were treated with fluvastatin, the expression of SIRT6 and phosphorylation of sterol regulatory element-binding protein (SREBP)-1 and AMPKα, which is regulated by SIRT6, increased. In this study, we examined the mechanism underlying cholesterol regulation by fluvastatin via SREBP-1 and AMPKα pathway and suggested that fluvastatin is an SIRT6 activator that regulates cholesterol homeostasis and fatty liver disease.

60 APPLIED LIFE SCIENCES↗

High damping capacity of Al alloys produced by friction stir processing

Highlights: • The damping capacity of age/non-age hardened Al alloys can be improved by FSP with low rotation rates. • The damping capacity of the FSP samples decreased with increasing the grain size, and did not depend on the alloy type. • This work suggests the potential of fabricating commercial Al alloys with good damping properties by FSP. - Abstract: Friction stir processing (FSP) was performed on both age-hardened and non-age-hardened Al alloys, with excellent damping properties obtained. The improved room temperature damping capacity of the FSP Al alloys can be mainly attributed to their low amount of solute atoms and the uniform distribution and high density of incoherent phases. The FSP Al alloys also exhibited improved high temperature damping capacity due to their equiaxed grain structure. The grain refinement and grain boundary pinning phase can further optimize the damping property of the FSP Al alloys. This work provides an effective strategy to improve the damping capacity of commercial Al alloys, which are regarded as low damping materials.

36 MATERIALS SCIENCE↗

Nature of Active Sites and Surface Intermediates during SCR of NO with NH 3 by Supported V 2 O 5 –WO 3 /TiO 2 Catalysts

In this study, time-resolved in situ IR was performed during selective catalytic reduction of NO with NH 3 on supported V 2 O 5 –WO 3 /TiO 2 catalysts to examine the distribution and reactivity of surface ammonia species on Lewis and Brønsted acid sites. While both species were found to participate in the SCR reaction, their relative population depends on the coverage of the surface vanadia and tungsta sites, temperature, and moisture. Although the more abundant surface NH 4 + , ads intermediates dominate the overall SCR reaction, especially for hydrothermally aged catalysts, the minority surface NH 3,ads intermediates exhibit a higher specific SCR activity (TOF). Lastly, the current study serves to resolve the long-standing controversy about the active sites for SCR of NO with NH 3 by supported V 2 O 5 –WO 3 /TiO 2 catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Isochrones for old (>5 Gyr) stars and stellar populations. I. Models for –2.4 ≤ [Fe/H] ≤+0.6, 0.25 ≤ Y ≤ 0.33, and –0.4 ≤ [α/Fe] ≤+0.4

Canonical grids of stellar evolutionary sequences have been computed for the helium mass-fraction abundances Y = 0.25, 0.29, and 0.33, and for iron abundances that vary from –2.4 to +0.4 (in 0.2 dex increments) when [α/Fe] =+0.4, or for the ranges –2.0 ≤ [Fe/H] ≤+0.6, –1.8 ≤ [Fe/H] ≤+0.6 when [α/Fe] =0.0 and –0.4, respectively. The grids, which consist of tracks for masses from 0.12 M{sub ⊙} to 1.1-1.5 M{sub ⊙} (depending on the metallicity) are based on up-to-date physics, including the gravitational settling of helium (but not metals diffusion). Interpolation software is provided to generate isochrones for arbitrary ages between ≈5 and 15 Gyr and any values of Y, [α/Fe], and [Fe/H] within the aformentioned ranges. Comparisons of isochrones with published color-magnitude diagrams (CMDs) for the open clusters M67 ([Fe/H] ≈0.0) and NGC 6791 ([Fe/H] ≈0.3) and for four of the metal-poor globular clusters (47 Tuc, M3, M5, and M92) indicate that the models for the observed metallicities do a reasonably good job of reproducing the locations and slopes of the cluster main sequences and giant branches. The same conclusion is reached from a consideration of plots of nearby subdwarfs that have accurate Hipparcos parallaxes and metallicities in the range –2.0 ≲ [Fe/H] ≲ –1.0 on various CMDs and on the (log T {sub eff}, M{sub V} ) diagram. A relatively hot temperature scale similar to that derived in recent calibrations of the infrared flux method is favored by both the isochrones and the adopted color transformations, which are based on the latest MARCS model atmospheres.

79 ASTRONOMY AND ASTROPHYSICS↗

Cloud condensation nuclei characteristics at the Southern Great Plains site: role of particle size distribution and aerosol hygroscopicity

The activation ability of aerosols as cloud condensation nuclei (CCN) is crucial in climate and hydrological cycle studies, but their properties are not well known. We investigated the long-term measurements of atmospheric aerosol properties, CCN concentrations (N CCN ) at supersaturation (SS = 0.1%–1.0%), and hygroscopicity at the Department of Energy's Southern Great Plains (SGP) site to illustrate the dependence of N CCN on aerosol properties and transport pathways. Cluster analysis was applied to the back trajectories of air masses to investigate their respective source regions. The results showed that aged biomass burning aerosols from Central America were characterized by higher accumulation mode particles (N accu ; median value 805 cm -3 ) and relatively high aerosol hygroscopicity (κ; median value ~0.25) values that result in the higher CCN activation and relatively high N CCN (median value 258–1578 cm -3 at a SS of 0.1%–1.0%). Aerosols from the Gulf of Mexico were characterized by higher N accu (~35%), and N CCN (230–1721 cm -3 at a SS of 0.1%–1.0%) with the lowest κ (~0.17). In contrast, relatively high nucleation mode particles (N nucl ; ~20%) and low N CCN (128–1553 cm -3 at a SS of 0.1%–1.0%) with higher κ (~0.30) values were observed on the aerosols associated with a westerly wind. The results indicate particle size as the most critical factor influencing the ability of aerosols to activate, whereas the effect of chemical composition was secondary. Our CCN closure analysis suggests that chemical composition and mixing state information are more crucial at lower SS, whereas at higher SS, most particles become activated regardless of their chemical composition and size. This study affirms that soluble organic fraction information is required at higher SS for better N CCN prediction, but both the soluble organics fraction and mixing state are vital to reduce the N CCN prediction uncertainty at lower SS.

54 ENVIRONMENTAL SCIENCES↗

Exploring Electrode-Level State-of-Charge and State-of-Health Dynamics in Lithium-Ion Battery Cells: Modeling and Experimental Identification

A computationally efficient model serves as a critical prerequisite for battery performance analysis and advanced battery management algorithm design. Although battery models that capture cell-level behavior have been widely explored in existing literature, electrode-level battery models have received much lesser attention till to date. However, such electrode-level models can significantly increase battery performance and life by enabling electrode-level health-conscious control. Such electrode-level control can effectively expand usable energy and power limits of the battery cells by utilizing the knowledge of individual electrodes' charge and health. In this context, this paper presents a comprehensive battery model developed with a reference electrode insertion that captures (i) electrode-level charge/discharge dynamics, (ii) stoichiometric and temporal dependencies of electrode-level resistances, (iii) solid electrolyte interface (SEI) layer growth as key degradation phenomenon, and (iv) capacity fade and resistance rise in each electrode due to nominal battery aging. The proposed model is identified, and a preliminary validation is performed utilizing terminal voltage and negative electrode potential data collected from a pouch cell under one continuous cycling and accelerated aging conditions where the cell experienced 14% capacity loss.

aging↗

Effect of thermal annealing and chemical treatments on secondary electron emission properties of atomic layer deposited MgO

This study reports on the secondary electron emission (SEE) performance of atomic layer deposited MgO films, with thicknesses in the range from 5 to 25 nm, for the application in the Timed Photon Counter. In this novel, photodetector MgO is utilized as a material for the fabrication of ultrathin transmission dynodes (tynodes). Two different types of PECVD silicon oxide films are applied on top of MgO, in order to protect it against etching steps in the fabrication of tynodes and also as a prevention against aging. Applicability of these two materials as capping films is evaluated in terms of achieved secondary electron yield (SEY) of MgO after their removal. Emission of secondary electrons is known to depend on numerous physical and chemical properties of the material, such as surface roughness and chemical composition. On that account, morphological and structural properties of modified MgO are determined by atomic force microscope and x-ray photoelectron spectrometer and linked to the changes in SEE behavior. The authors demonstrate that the application of a suitable capping layer followed by its removal provides an SEY of 6.6, as opposed to the value of 4.8 recorded from the as-deposited MgO film. Furthermore, in a following experiment, they showed that annealing of MgO films at high temperatures (up to 1100 °C) significantly improved the secondary electron emission, elevating the SEY to 7.2.

ALD↗

EARLY-TYPE HOST GALAXIES OF TYPE Ia SUPERNOVAE. I. EVIDENCE FOR DOWNSIZING

Type Ia supernova (SN Ia) cosmology provides the most direct evidence for the presence of dark energy. This result is based on the assumption that the lookback time evolution of SN Ia luminosity, after light curve corrections, would be negligible. Recent studies show, however, that the Hubble residual (HR) of SN Ia is correlated with the mass and morphology of host galaxies, implying the possible dependence of SN Ia luminosity on host galaxy properties. In order to investigate this more directly, we have initiated a spectroscopic survey for early-type host galaxies, for which population age and metallicity can be more reliably determined from the absorption lines. In this first paper of the series, we present here the results from high signal-to-noise ratio (≳100 per pixel) spectra for 27 nearby host galaxies in the southern hemisphere. For the first time in host galaxy studies, we find a significant (∼3.9σ) correlation between host galaxy mass (velocity dispersion) and population age, which is consistent with the “downsizing” trend among non-host early-type galaxies. This result is rather insensitive to the choice of population synthesis models. Since we find no correlation with metallicity, our result suggests that stellar population age is mainly responsible for the relation between host mass and HR. If confirmed, this would imply that the luminosity evolution plays a major role in the systematic uncertainties of SN Ia cosmology.

79 ASTRONOMY AND ASTROPHYSICS↗

Deriving Physical Properties from Broadband Photometry with Prospector: Description of the Model and a Demonstration of its Accuracy Using 129 Galaxies in the Local Universe

Broadband photometry of galaxies measures an unresolved mix of complex stellar populations, gas, and dust. Interpreting these data is a challenge for models: many studies have shown that properties derived from modeling galaxy photometry are uncertain by a factor of two or more, and yet answering key questions in the field now requires higher accuracy than this. Here, we present a new model framework specifically designed for these complexities. Our model, Prospector- α , includes dust attenuation and re-radiation, a flexible attenuation curve, nebular emission, stellar metallicity, and a six-component nonparametric star formation history. The flexibility and range of the parameter space, coupled with Monte Carlo Markov chain sampling within the Prospector inference framework, is designed to provide unbiased parameters and realistic error bars. We assess the accuracy of the model with aperture-matched optical spectroscopy, which was excluded from the fits. We compare spectral features predicted solely from fits to the broadband photometry to the observed spectral features. Our model predicts H α luminosities with a scatter of ∼0.18 dex and an offset of ∼0.1 dex across a wide range of morphological types and stellar masses. This agreement is remarkable, as the H α luminosity is dependent on accurate star formation rates, dust attenuation, and stellar metallicities. The model also accurately predicts dust-sensitive Balmer decrements, spectroscopic stellar metallicities, polycyclic aromatic hydrocarbon mass fractions, and the age- and metallicity-sensitive features D{sub n}4000 and H δ . Although the model passes all these tests, we caution that we have not yet assessed its performance at higher redshift or the accuracy of recovered stellar masses.

79 ASTRONOMY AND ASTROPHYSICS↗

Enhancing Lithium-Ion Battery Aging Simulations: Coupling a High-Resolution, 3D, Grain-Scale Electromechanical Model to a Single-Particle Model

One of the main goals in modeling lithium-ion batteries is to improve/predict longevity and resilience of new chemistries. Unfortunately, this requires simulation of thousands of charge/discharge cycles, which can be rather time consuming depending on the fidelity of the simulation. The purpose of this talk is to discuss a new modeling framework that couples a high-resolution, continuous damage model (CDM) to a single particle model (SPM) resulting in a good combination of speed and fidelity. In previous work, a 3D, continuum-level chemo-mechanical model was developed to investigate cracking within a single cathode particle comprised of hundreds to thousands of randomly oriented grains. The CDM predicted that particle fracture is primarily due to non-ideal grain interactions with slight dependence on high-rate charge demands. Essentially, when neighboring grains were misaligned, they expanded different rates relative to one another leading to high stresses and ultimately the formation of intraparticle cracks. The model predicted that small particles with large grains develop significantly less damage than larger particles with small grains. Finally, the model predicted most of the chemo-mechanical damage accumulates in the first charge after formation. This chemo-mechanical "damage saturation" effect indicated that initial particle fracture occurs within the first few cycles, while long-term cathode degradation is not solely chemo-mechanically induced. This led to a need for simulating fatigue-like mechanism that degrade the battery over longer time scales. In order to reach the time scales, need to resolve fatigue-like degradation, the CDM needs to be complemented by a faster model. Therefore, recent efforts have been focused on using results from the CDM to inform parameters within the SPM. These parameters are homogenization factors that are associated with diffusion, particle radius, and/or exchange current density. By coupling the CDM to the SPM, the aging simulation is broken up into two domains: short-term and long-term degradation. The short-term degradation occurs over a single cycle and is handled by the CDM due of its high fidelity, but relatively expensive computational cost. Such mechanism include break-in crack caused by mismatches in grain orientation. The long-term degradation occurs over tens of cycles and is handled by the SPM due it's computational efficiency. Most of the fatigue-like mechanism fall into this category. The eventual goal of this modeling framework is to upscale to a psudo-2D model allowing for full electrode simulation, which are informed by high-fidelity grain-scale simulations.

electrochemistry↗

Transverse flexural tests as a tool for assessing damage to PMR-15 composites from isothermal aging in air at elevated temperatures

To date, the effect of thermo-oxidative aging on unidirectional composite mechanical properties has been monitored by the measurement of interlaminar shear strength (ILSS) and either three or four point longitudinal flexural strength (LFS) of the composites being tested. Both results are affected by the fiber-to-matrix bonding, the former being dependent on the shear resistance of the interface and the latter on the degree of load sharing by the fibers through the fiber/matrix interface. Recently, fiber/matrix interfacial bond strengths have been monitored using a transverse flexural strength (TFS) test method. This test method was used to evaluate the effect of fiber surface treatment on the fiber/matrix bond. The interface bonding was varied in these tests using Hercules A-fibers with three-types of surfaces that produce bonds of poor, better, and good quality. The TFS was found not only to be sensitive to the bonding, but also to the aging time of unidirectional A-fiber/PMR-15 composites. This relationship reflects the mechanism by which the PMR-15 degrades during thermal aging.

Bowles, Kenneth J.↗

Mid-infrared followup of cold brown dwarfs: diversity in age, mass and metallicity

We present new Spitzer IRAC [3.6], [4.5], [5.8] and [8.0] photometry of nine very late-type T dwarfs. Combining this with previously published photometry, we investigate trends with type and color that are useful for both the planning and interpretation of infrared surveys designed to discover the coldest T or Y dwarfs. Brown dwarfs with effective temperature (T{sub eff}) below 700 K emit more than half their flux at wavelengths longer than 3 {micro}m, and the ratio of the mid-infrared flux to the near-infrared flux becomes very sensitive to T{sub eff} at these low temperatures. We confirm that the color H (1.6 {micro}m) - [4.5] is a good indicator of T{sub eff} with a relatively weak dependence on metallicity and gravity. Conversely, the colors H - K (2.2 {micro}m) and [4.5] - [5.8] are sensitive to metallicity and gravity. Thus near- and mid-infrared photometry provide useful indicators of the fundamental properties of brown dwarfs, and if temperature and gravity are known, then mass and age can be reliably determined from evolutionary models. There are twelve dwarfs currently known with H - [4.5] > 3.0, and {approx} 500 < T{sub eff} K {approx}< 800, which we examine in detail. The ages of the dwarfs in the sample range from very young (0.1 - 1.0 Gyr) to relatively old (3 - 12 Gyr). The mass range is possibly as low as 5 Jupiter masses to up to 70 Jupiter masses, i.e. near the hydrogen burning limit. The metallicities also span a large range, from [m/H]= -0.3 to [m/H]= +0.2. The small number of T8 - T9 dwarfs found in the UKIRT Infrared Deep Sky Survey to date appear to be predominantly young low-mass dwarfs. Accurate mid-infrared photometry of cold brown dwarfs is essentially impossible from the ground, and extensions to the mid-infrared space missions warm-Spitzer and WISE are desirable in order to obtain the vital mid-infrared data for cold brown dwarfs, and to discover more of these rare objects.

79 ASTRONOMY AND ASTROPHYSICS↗

Risk of Symptomatic Stroke After Radiation Therapy for Childhood Cancer: A Long-Term Follow-Up Cohort Analysis

Purpose: Long-term childhood cancer survivors are at high risk of late adverse effects, including stroke. We aimed to determine the cumulative incidence of clinically validated symptomatic stroke (transient ischemic attack [TIA], cerebral infarction, and intracerebral hemorrhage [ICH]) and to quantify dose-effect relationships for cranial radiation therapy (CRT) and supradiaphragmatic radiation therapy (SDRT). Methods and Materials: Our single-center study cohort included 1362 survivors of childhood cancer that were diagnosed between 1966 and 1996. Prescribed CRT and SDRT doses were converted into the equivalent dose in 2-Gy fractions (EQD{sub 2}). Multivariate Cox regression models were used to analyze the relationship between the EQD{sub 2} and stroke. Results: After a median latency time of 24.9 years and at a median age of 31.2 years, 28 survivors had experienced a first stroke: TIA (n=5), infarction (n=13), and ICH (n=10). At an attained age of 45 years, the estimated cumulative incidences, with death as competing risk, among survivors treated with CRT only, SDRT only, both CRT and SDRT, and neither CRT nor SDRT were, respectively, 10.0% (95% confidence interval [CI], 2.5%-17.0%), 5.4% (95% CI, 0%-17.0%), 12.5% (95% CI, 5.5%-18.9%), and 0.1% (95% CI, 0%-0.4%). Radiation at both locations significantly increased the risk of stroke in a dose-dependent manner (hazard ratios: HR{sub CRT} 1.02 Gy{sup −1}; 95% CI, 1.01-1.03, and HR{sub SDRT} 1.04 Gy{sup −1}; 95% CI, 1.02-1.05). Conclusions: Childhood cancer survivors treated with CRT, SDRT, or both have a high stroke risk. One in 8 survivors treated at both locations will have experienced a symptomatic stroke at an attained age of 45 years. Further research on the pathophysiologic processes involved in stroke in this specific group of patients is needed to enable the development of tailored secondary prevention strategies.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Enhanced calcium entry via activation of NOX/PKC underlies increased vasoconstriction induced by methylglyoxal

Advanced glycation end-products (AGEs) play a pivotal role in macro- and micro-vascular diabetic complications. We investigated the mechanism by which methylglyoxal (an endogenous generator of AGEs) affects vascular contractility using the isolated artery technique. Contractile responses to vasoconstrictors phenylephrine (PE), angiotensin II (Ang II), vasopressin (VP) and KCl were measured in the isolated rat aorta following one-our exposure to methylglyoxal (50–200 μM). The perfused rat kidney was employed to confirm the effect of methylglyoxal on microvessels. Methylglyoxal-induced changes in cytosolic calcium were measured in the smooth muscle layer of the aorta with the calcium-sensing fluorophore Fluo-4 AM. Methylglyoxal significantly increased maximal contraction of the rat aorta to PE, Ang II and VP. Similar results were seen in response to the depolarizing vasoconstrictor KCl in macro and micro vessels. The methylglyoxal-induced increases in aortic contraction mediated by the agonist and KCl were endothelium independent. Methylglyoxal-induced increases in KCl-dependent aortic contraction were abolished after the removal of extracellular calcium or in the presence of the calcium channel blocker nifedipine. Incubation with the antioxidant N-acetyl-l-cysteine (NAC), apocynin (a nonselective NADPH oxidase (NOX) inhibitor) or chelerythrine (a protein kinase C (PKC) inhibitor) prior to methylglyoxal pre-treatment reversed the methylglyoxal-induced increases in the rat aortic contractility. In conclusion, the formation of AGEs increases vasoconstriction of both macro- and micro-vessels by increasing the voltage-activated calcium entry in vascular smooth muscles in a NOX and PKC dependent manner.

60 APPLIED LIFE SCIENCES↗