Examination of returned Surveyor III camera visor for alpha radioactivity
Alpha radioactivity in Surveyor 3 camera visor, calculating upper limit of Po 210 at equilibrium of Oceanus Procellarum
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Alpha radioactivity in Surveyor 3 camera visor, calculating upper limit of Po 210 at equilibrium of Oceanus Procellarum
Compact, lightweight camera which advances film frames without use of conventional sprockets and slip clutches obtains time lapse photomicrographs of human cell growth in a zero-G environment over a period of about a month.
The f1 Hewitt camera is a field flattened Schmidt system of 60cm aperture. The salient features of this equipment are briefly described. Details of the methods of plate measurement are then given. The plate reduction is carried out in two stages. The plate is first calibrated using the photogrammetric method. The formulae usually quoted have been extended to take account of the large distortion introduced by the field flattening lens. In the second stage, the satellite measurements are reduced to satellite positions corrected for refraction, aberration, and when necessary, phase.
A sensor system which provides registered high-solution multispectral images from a single sensor with no mechanical moving parts is reported, and the operation of an image dissector camera (IDC) is described. An earth scene 100 nautical miles wide is imaged through a single lens onto a photocathode surface containing three spectral filters, thereby producing three separate spectral signatures on the photocathode surface. An electron image is formed, accelerated, focused, and electromagnetically, deflected across an image plane which contains three sampling apertures, behind which are located three electron multipliers. The IDC system uses electromagnetic deflection for cross-track scanning and spacecraft orbit motion for along-track scanning, thus eliminating the need for a mechanical scanning mirror.
Surveyor 3 landed on the moon in April 1967. Part of the spacecraft was returned to earth in November 1969 by the Apollo 12 astronauts. A stripping film containing dust removed from the camera light filter was received for study. The study involved the characterization of the dust; the results of the study are presented.
The mirror on the Surveyor 3 television camera was subjected to tests which modified its surface. Lunar dust was removed by rubbing, by acetate and metallic film stripping techniques, rinsing, scraping, and by inadvertently touching the surface. A second shadow line was revealed. Second and third generation peels were taken across the upper shadow line, and a study was made in order to define the source(s) or events(s) responsible for creating the two shadow lines occurring on the lower part of the mirror.
The measurements made to analyze changes in the camera's optical performance involved the following areas: (1) spectral reflectance (specular), (2) gonioreflectance, (3) ellipsometry, (4) spectral transmission, (5) contrast and modulation transfer, and (6) photography (macro and micro).
The TV camera visor was placed in a vacuum chamber and examined for alpha radioactivity using an alpha-scattering instrument, and plates covered with the same paint and made at the same time as the visor were used as a control. The spectra of visor and plates are very similar, and it is concluded that the gross activity on the visor is due entirely to the activity of the paint. The data were used to obtain the amount of Po-210 activity on the lunar surface. It is felt that the lack of detected alpha radioactivity does not indicate a lack of activity on the moon, since dust layers were knocked off the visor.
The internal structure of painted and unpainted aluminum alloy sheet samples from the TV camera shrouds were examined by high-voltage transmission electron microscopy. No clear-cut evidence of radiation damage effects was observed. Noticeable differences in microstructures between the upper visor and the sides and bottom of the lower shroud suggest different thermal histories, and the maximum temperatures due to solar heating are estimated to be between 164 and 319 C. Some correlation between microstructures and maximum estimated temperature is noted. It is felt that the apparent temperature rise due to solar heating will not affect the structural integrity of spacecraft components except possibly for very long periods of exposure. However, substantial thermal diffusion could affect interpretation of solar wind rare gas studies.
The locations of various parts of the Surveyor camera are presented. Tables were prepared with emphasis on: (1) exterior parts and surfaces that are directly exposed to space, (2) parts that shield others from space radiation, (3) representative or unique materials, and (4) electronic devices that may contain unique or well-characterized materials.
Optical-mechanical scanning techniques are generally employed in instruments specifically designed to spectrally or radiometrically characterize variations in scene brightness. The effect of aliasing, which can be caused by line scan sampling, on the spatial detail of the reconstructed image has, therefore, been of little concern. Emphasis of some recent applications of optical-mechanical scanning techniques in facsimile cameras is, however, on the spatial characterization of the scene which, as is shown, can be severely degraded by aliasing. The characteristics of aliasing are analyzed to establish quantitative bounds, and photosensor aperture shaping and line scan spacing are investigated as a means for reducing this degradation.
In 1968, Dicke had suggested that multiple-pinhole camera systems would have significant advantages concerning the SNR in X-ray and gamma-ray astronomy if the multiple images could be somehow synthesized into a single image. The practical development of an image-synthesis method based on these suggestions is discussed. A formulation of the SNR gain theory which is particularly suited for dealing with the proposal by Dicke is considered. It is found that the SNR gain is by no means uniform in all X-ray astronomy applications.
The command module television camera monitor exhibited loss of horizontal synchronization during the initial usage. This condition cleared and performance of the monitor was normal until the press conference telecast during the transearth coast phase. At that time, the monitor had the same horizontal synchronization problem reported during the initial usage. The horizontal hold control adjustment would not correct the condition. The monitor was turned off for approximately 5 minutes, then turned back on, after which the monitor's picture was normal. The loss of horizontal synchronization was most likely caused by either an intermittent condition in the precision voltage regulator circuit assembly in the low voltage power supply, or the shift of the stable range of the horizontal potentiometer setting when warming up after turn-on.
The design modifications to the WX-5419B SEC camera tube to make it suitable for astronomical applications are presented. The areas identified for improvement include: gun resolution, elimination of suppressor mesh, reduction of dark current, and UV transmitting input window.
The tests and equipment are described for measuring the exact performance characteristics of camera systems for earth resources, space, and other applications. The tests discussed include: modulation transfer function, field irradiance, veiling glare, T-number tests, shutter speed, spectral transmission, and focal length.
The erratic operation of the mapping camera assemblies on board Apollo 15, 16, 17 is investigated. The exact causes of the problems with the scientific equipment module deployment mechanisms are not identified. However, the possibility of increased friction in hard vacuum is implied. It is suggested that since hard vacuum conditions are not attainable in large chambers, realistically loaded components could be tested in small chambers capable of vacuums to 10 to the minus 14th power torr. It is concluded that this technique carries with it the greatest promise for future investigations.
Results for the geocentric coordinates of 72 globally distributed satellite tracking stations consisting of 58 cameras and 14 lasers are presented. The observational data for this solution consists of over 65,000 optical observations and more than 350 laser passes recorded during the National Geodetic Satellite Program, the 1968 Centre National d'Etudes Spatiales/Smithsonian Astrophysical Observatory (SAO) Program, and International Satellite Geodesy Experiment Program. Dynamic methods were used. The data were analyzed with the GSFC GEM and SAO 1969 Standard Earth Gravity Models. The recent value of GM = 398600.8 cu km/sec square derived at the Jet Propulsion Laboratory (JPL) gave the best results for this combination laser/optical solution. Solutions are made with the deep space solution of JPL (LS-25 solution) including results obtained at GSFC from Mariner-9 Unified B-Band tracking. Datum transformation parameters relating North America, Europe, South America, and Australia are given, enabling the positions of some 200 other tracking stations to be placed in the geocentric system.
Image quality criteria are defined and mathematically formulated for the prediction computer program which is to be developed for the Viking lander imaging experiment. The general objective of broad-band (black and white) imagery to resolve small spatial details and slopes is formulated as the detectability of a right-circular cone with surface properties of the surrounding terrain. The general objective of narrow-band (color and near-infrared) imagery to observe spectral characteristics if formulated as the minimum detectable albedo variation. The general goal to encompass, but not exceed, the range of the scene radiance distribution within single, commandable, camera dynamic range setting is also considered.