Search NASA⌕ Search

SEARCH · Search NASA

Results for “Capture”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

The Generic Data Capture Facility

The Generic Data Capture Facility, which can provide data capture support for a variety of different types of spacecraft while enabling operations costs to be carefully controlled, is discussed. The data capture functions, data protection, isolation of users from data acquisition problems, data reconstruction, and quality and accounting are addressed. The TDM and packet data formats utilized by the system are described, and the development of generic facilities is considered.

Connell, Edward B.↗

Use of a generalized Stokes number to determine the aerodynamic capture efficiency of non-Stokesian particles from a compressible gas flow

The aerodynamic capture efficiency of small but nondiffusing particles suspended in a high-speed stream flowing past a target is known to be influenced by parameters governing small particle inertia, departures from the Stokes drag law, and carrier fluid compressibility. By defining an effective Stokes number in terms of the actual (prevailing) particle stopping distance, local fluid viscosity, and inviscid fluid velocity gradient at the target nose, it is shown that these effects are well correlated in terms of a 'standard' (cylindrical collector, Stokes drag, incompressible flow, sq rt Re much greater than 1) capture efficiency curve. Thus, a correlation follows that simplifies aerosol capture calculations in the parameter range already included in previous numerical solutions, allows rational engineering predictions of deposition in situations not previously specifically calculated, and should facilitate the presentation of performance data for gas cleaning equipment and aerosol instruments.

Israel, R.↗

Examples of the nonlinear dynamics of ballistic capture and escape in the earth-moon system

An example of a trajectory is given which is initially captured in an elliptic resonant orbit about the earth and then ballistically escapes the earth-moon system. This is demonstrated by a numerical example in three-dimensions using a planetary ephemeris. Another example shows a mechanism of how an elliptic orbit about the earth can increase its energy by performing a complex nonlinear transition to an elliptic orbit of a larger semi-major axis. Capture is also considered. An application of ballistic capture at the moon via an unstable periodic orbit using the four-body sun-earth-moon-S/C interaction is described.

Belbruno, Edward A.↗

Study of Design Knowledge Capture (DKC) schemes implemented in magnetic bearing applications

A design knowledge capture (DKC) scheme was implemented using frame-based techniques. The objective of such a system is to capture not only the knowledge which describes a design, but also that which explains how the design decisions were reached. These knowledge types were labelled definitive and explanatory, respectively. Examination of the design process helped determine what knowledge to retain and at what stage that knowledge is used. A discussion of frames resulted in the recognition of their value to knowledge representation and organization. The FORMS frame system was used as a basis for further development, and for examples using magnetic bearing design. The specific contributions made by this research include: determination that frame-based systems provide a useful methodology for management and application of design knowledge; definition of specific user interface requirements, (this consists of a window-based browser); specification of syntax for DKC commands; and demonstration of the feasibility of DKC by applications to existing designs. It was determined that design knowledge capture could become an extremely valuable engineering tool for complicated, long-life systems, but that further work was needed, particularly the development of a graphic, window-based interface.

Source record↗

Free stream capturing in fluid conservation law for moving coordinates in three dimensions

The free-stream capturing technique for both the finite-volume (FV) and finite-difference (FD) framework is summarized. For an arbitrary motion of the grid, the FV analysis shows that volumes swept by all six surfaces of the cell have to be computed correctly. This means that the free-stream capturing time-metric terms should be calculated not only from a surface vector of a cell at a single time level, but also from a volume swept by the cell surface in space and time. The FV free-stream capturing formulation is applicable to the FD formulation by proper translation from an FV cell to an FD mesh.

Obayashi, Shigeru↗

Production of recycled pulsars in globular clusters via two-body tidal capture

The numbers of binary systems containing a neutron star that are formed in the cores of globular clusters via two-body tidal capture are investigated. The subsequent evolution of the resulting binary systems is examined. Monte Carlo techniques are employed to trace the histories of many neutron stars in the core of a model globular cluster. Various scenarios for mass stripping during capture and orbital circularization, and the effects of magnetic braking on the circularized orbits are explored. Calculations are carried out for two model clusters: 47 Tuc and Omega Cen. Distributions of orbital periods for newly formed binaries containing a neutron star in orbit with either a main-sequence star or a giant are presented. Each binary is followed until contact between the captured star and the neutron star is established. It is argued that these systems should be regarded as potential progenitors of 'recycled' pulsars.

Di Stefano, R↗

On-orbit demonstrations of automated closure and capture using ESA-developed proximity operations technologies and an existing serviceable NASA Explorer platform spacecraft

Since 1984 the European Space Agency (ESA) has been working to develop an autonomous rendezvous and docking capability to enable Hermes to dock automatically with Columbus. As a result, ESA (with Matra, MBB, and other space companies) have developed technologies that are directly supportive of the current NASA initiative for Automated Rendezvous and Capture. Fairchild and Matra would like to discuss the results of the applicable ESA/Matra rendezvous and capture developments and suggest how these capabilities could be used together with an existing NASA Explorer Platform satellite to minimize new development and accomplish a cost-effective automatic closure and capture demonstration program.

Hohweisner, Bill↗

Manned versus unmanned rendezvous and capture

Rendezvous and capture (docking) operations may be performed either automatically or under manual control. In cases where humans are far from the mission site, or high-bandwidth communications lines are not in place, automation is the only option. Such might be the case with unmanned missions to the moon or Mars that involve orbital docking or cargo transfer. In crewed situations where sensors, computation capabilities, and other necessary instrumentation are unavailable, manual control is the only alternative. Power, mass, cost, or other restrictions may limit the availability of the machinery required for an automated rendezvous and capture. The only occasions for which there is a choice about whether to use automated or manual control are those where the vehicle(s) have both the crew and instrumentation necessary to perform the mission either way. The following discussion will focus on the final approach or capture (docking) maneuver. The maneuvers required for long-range rendezvous operations are calculated by computers. It is almost irrelevant whether it is an astronaut, watching a count-down timer who pushes the button firing the thruster or whether the computer keeps track of the time and fires with the astronaut monitoring. The actual manual workload associated with a mission that may take as long as hours or days to perform is small. The workload per unit time increases tremendously during the final approach (docking) phase and this is where the issue of manual versus automatic is more important.

Brody, Adam R.↗

Simulation models for autonomous rendezvous and capture

Autonomous rendezvous and capture (AR&C) is a critical space technology with significant application to a variety of missions. Martin Marietta Astronautics Group (MMAG) has been developing AR&C technical capability in support of several recent NASA contracts. The use of AR&C for the Mars Rover/Sample Return (MRSR) mission was studied through a contract with JSC. Incorporation of AR&C in the Space Transportation Vehicle (STV) lunar mission was studied through a contract with MSFC. The MMAG has also been developing AR&C simulation capability under independent research and development studies. Simulation development was driven by two goals: comprehensive software simulation of the autonomous rendezvous and capture mission from launch to final capture; and integration of the overall software and hardware simulation to support an AR&C flight demonstration. This presentation will highlight the AR&C software simulation tools and analyze results from their application to the STV lunar mission. Plans for an integrated software and hardware simulation will also be summarized.

Smith, Nick G.↗

Involuntary attentional capture by abrupt onsets

Five experiments were carried out to examine the extent to which brief abrupt-onset visual stimuli involuntarily capture spatial attention. A fundumantal limitation on the conscious control of spatial attention is demonstrated. Data obtained reveal conditions under which the control of spatial attention is completely involuntary: attention is captured by an irrelevant event despite subjects' intentions to ignore the event. The paradigm used provided strong incentives to ignore the distracting abrupt onset, but these were insufficient to prevent capture. Results suggest that voluntary control of attention is limited to focusing attention in advance on locations, objects, or properties of interest. Under appropriate conditions, spatial attention can be involantarily drawn to abrupt-onset events despite the intention of subjects' to ignore them.

Remington, Roger W.↗

Intact capture of hypervelocity particles on Shuttle

The capability for capturing micrometeoroid analogs intact through laboratory simulations in passive underdense media offers a valuable tool for cosmic dust research. However, no amount of laboratory simulations can replace actual space experiments due to the technical inability to launch high fidelity analogs of micrometeoroids in ground laboratories and then reliably simulating high hypervelocities (greater than 7 km/s). Fluffy composite micrometeoroid analogs tend to break up and have not survived laboratory launches at beyond 4 km/s, however, a new technique of launching cluster analogs was developed for the two-stage light-gas gun at NASA Ames Vertical Gun Range. Plasma drag or electrostatic accelerators may be able to achieve higher speeds than two-stage light-gas guns but only with very limited projectile compositions and may result in severe projectile deformation. Consequently, a space demonstration of intact capture was sought since 1983. Initial results from our STS-47 flight, which carried the first Shuttle Sample Return Experiment (SRE) with silica aerogel capture media, are reported.

Tsou, P.↗

Micro-abrasion package capture cell experiment on the trailing edge of LDEF: Impactor chemistry and whipple bumper shield efficiencies

Four of the eight available double layer microparticle capture cells, flown as the experiment A0023 on the trailing (West) face of LDEF, have been extensively studied. An investigation of the chemistry of impactors has been made using SEM/EDX techniques and the effectiveness of the capture cells as bumper shields has also been examined. Studies of these capture cells gave positive EDX results, with 53 percent of impact sites indicating the presence of some chemical residues, the predominant residue identified as being silicon in varying quantities.

Fitzgerald, Howard J.↗

Contingent Attentional Capture

Four experiments address the degree of top-down selectivity in attention capture by feature singletons through manipulations of the spatial relationship and featural similarity of target and distractor singletons in a modified spatial cuing paradigm. Contrary to previous studies, all four experiments show that when searching for a singleton target, an irrelevant featural singleton captures attention only when defined by the same feature value as the target. Experiments 2, 3, and 4 provide a potential explanation for this empirical discrepancy by showing that irrelevant singletons can produce distraction effects that are independent of shifts of spatial attention. The results further support the notion that attentional capture is contingent on top-down attention control settings but indicates that such settings can be instantiated at the level of feature values.

Remington, Roger↗

Velocity Modification for Earth Capture of An Astronomical Body in the Solar System

In studying the possible capture of an astronomical body that is orbiting around the sun, two questions are encountered: How near must it approach the earth before it could be captured? How could we make it approach as near to the earth as required? This paper answers the first question by using the results of the restricted three-body problem, and partially answers the second question by estimating the order of magnitude of the velocity modification needed to change the orbit of the body and make capture possible.

Huang, Su-Shu↗

Spurious Numerical Oscillations in Numerical Simulation of Supersonic Flows Using Shock Capturing Schemes

The numerical simulation of transitional and turbulent processes in hypersonic boundary layers often involves a physical process of a shock-disturbance wave interaction in complex two-dimensional and three-dimensional flow fields. For such simulations, it is required that there be a high order of accuracy in capturing both the shock and the small disturbances. The purpose of this paper is to evaluate the viability of using high order shock capturing schemes to track small disturbances in a multi-dimensional steady hypersonic flow. The numerical methods that are to be studied are the Total Variation Diminishing (TVD) scheme, and Essentially Non-Oscillatory (ENO) scheme. This paper shows that the presence of numerical oscillations in the flow field solution may drastically hinder any attempt at tracking the propagation of any physical disturbances. It has been found that the numerical oscillations that exist for shock capturing methods may be significant enough to pollute a flow field containing small physical disturbances. The effects of the refinement of the grid do not reduce the oscillations, but rather they decrease the wavelength of the oscillations. It is shown that by aligning the shock with the grid, the amplitude of these spurious oscillations may be greatly reduced.

Lee, Theodore K.↗

Low-Density Silica Xerogel Capture of Leonids Meteor Storm Dust Candidates by Stratospheric Balloon Return

High altitude balloon (20 km) and low-density capture media were explored to return meteor-related dust during the November 1998 Leonids meteor storm. One 20-30 micron particle captured showed a characteristic signature of extraterrestrial origin, featuring high aluminum, magnesium and other non-volatile metals. The technique of balloon capture will be optimized for March and November 1999 reflights.

Noever, David↗

Attentional Capture Can Depend on Search Mode

We have previously reported that an irrelevant singleton in one color does not capture attention when the target is defined by a singleton in a different color. Here, we show that when subjects are uncertain of the target color, capture occurs even when distractors and targets differ in color. The effects of target certainty on capture are explained in terms of the contingent involuntary orienting hypothesis of Folk, Remington, and Johnston (1992).

Remington, Roger W.↗

The Capture of Interstellar Dust: The Pure Poynting-Robertson Case

Ulysses and Galileo spacecraft have discovered interstellar dust particles entering the solar system. In general, particles trajectories not altered by Lorentz forces or radiation pressure should encounter the sun on open orbits. Under Newtonian forces alone these particles return to the interstellar medium. Dissipative forces, such as Poynting Robertson (PR) and corpuscular drag and non-dissipative Lorentz forces can modify open orbits to become closed. In particular, it is possible for the orbits of particles that pass close to the Sun to become closed due to PR drag. Further, solar irradiation will cause modification of the size of the dust particle by evaporation. The combination of these processes gives rise a class of capture orbits and bound orbits with evaporation. Considering only the case of pure PR drag a minimum impact parameter is derived for initial capture by Poynting-Robertson drag. Orbits in the solar radiation field are computed numerically accounting for evaporation with optical and material properties for ideal interstellar particles modeled. The properties of this kind of particle capture are discussed for the Sun but is applicable to other stars.

Jackson, A. A.↗